PAP2 to work with a diferent VoIP Provider

how to unblock a PAP2 adapter to work with a diferent service Provider instead of Vonage? I want to use SuperNetTel.com in Mexico, any help is truly appreciated!

I am also trying to figure this out. My plan is to use PAP2-NA (which is SIP) my plain old telephones, Uplink Software (which should convert Skype to SIP) and my Skype account on the PC. Anyone done this with this hardware. Would like to know how well it worked. The Uplink software says it works to change Skype2SIP and SIP2Skype?
The PAP2-NA I currently don't own, but plan to buy the one that is factory generic (NA Model). I'm just hoping that the PAP2 has better quality than those USB boxes and also less problems with other equipment running on the PC's USB as this will connect to the router.
Thanks, GLS
Message Edited by bgs on 04-04-200704:42 AM
Message Edited by bgs on 04-04-200704:44 AM

Similar Messages

Problem working with Sun PKCS#11 provider - CKR_USER_NOT_LOGGED_IN

Hi I was trying out the new Sun PKCS#11 provider in J2SE1.5 RC, I am not able to generate RSA certificate and store into the pkcs#11 device (HSM) keystore.
Bellow is the command I gave
java sun.security.tools.KeyTool -genkey -keystore NONE -storetype PKCS11 -genkey -v -alias "acs_visa_server" -keyalg "RSA" -sigalg "SHA1WithRSA" -keysize "1024" -validity "800" -dname "cn=192.168.1.1,ou=Test Technology,o=Test Ltd.,l=Test,S=Test,c=IN"
The output is like this
Enter keystore password: 1234
Generating 1,024 bit RSA key pair and self-signed certificate (SHA1WithRSA)
for: CN=192.168.1.1, OU=Test Technology, O=Test Ltd., L=Test, ST=Test, C=IN
keytool error: java.security.KeyStoreException: sun.security.pkcs11.wrapper.PKCS11Exception: CKR_USER_NOT_LOGGED_IN
And is there a way to manage Private Keys i.e., store/delete/exprot to keystore using java code. Thanks in advance for the help.

I am a developer :-), The hsm vendor has just implemented the pkcs#11 dll compliant with PKCS#11 V 2.10. And I am able to access the tokens and generate the keys using there tools written in c++.
It looks like I need to give the user�s pin for the slot and don't know how to provide it. I even tried to do programmatically. Bellow is the code
//--------------- main code -----
char pin[] = "1234".toCharArray();
          KeyStore ks = KeyStore.getInstance("PKCS11", providerName);
          ks.load(null, pin);
          try {
               MyGuiCallbackHandler mcb = new MyGuiCallbackHandler();
               AuthProvider aprov = (AuthProvider)Security.getProvider("SunPKCS11");
               aprov.login(null, mcb);
          } catch (Exception e) {
               System.out.println("Error in login : "+e);
               //return;
String args1[] = new String[]{"-genkey", "-keystore", "NONE", "-storetype", "PKCS11",
               "-genkey", "-v", "-alias", "cert_alias", "-keyalg", "RSA", "-sigalg", "SHA1WithRSA",
               "-keysize", "1024", "-validity", "800", "-dname",
               "cn=192.168.1.1,ou=test,o=test Ltd.,l=test,S=test,c=IN"};
          sun.security.tools.KeyTool.main(args1);
//--------------- help class -----
class MyGuiCallbackHandler implements CallbackHandler {
     public void handle(Callback[] callbacks)
               throws IOException, UnsupportedCallbackException {
for (int i = 0; i < callbacks.length; i++) {
if (callbacks[i] instanceof TextOutputCallback) {
// display the message according to the specified type
TextOutputCallback toc = (TextOutputCallback)callbacks;
switch (toc.getMessageType()) {
case TextOutputCallback.INFORMATION:
System.out.println(toc.getMessage());
break;
case TextOutputCallback.ERROR:
System.out.println("ERROR: " + toc.getMessage());
break;
case TextOutputCallback.WARNING:
System.out.println("WARNING: " + toc.getMessage());
break;
default:
throw new IOException("Unsupported message type: " +
toc.getMessageType());
} else if (callbacks[i] instanceof NameCallback) {
// prompt the user for a username
NameCallback nc = (NameCallback)callbacks[i];
// ignore the provided defaultName
System.err.print(nc.getPrompt());
System.err.flush();
nc.setName((new BufferedReader
(new InputStreamReader(System.in))).readLine());
} else if (callbacks[i] instanceof PasswordCallback) {
// prompt the user for sensitive information
PasswordCallback pc = (PasswordCallback)callbacks[i];
System.err.print(pc.getPrompt());
System.err.flush();
pc.setPassword(readPassword(System.in));
} else {
throw new UnsupportedCallbackException
(callbacks[i], "Unrecognized Callback");
     // Reads user password from given input stream.
     private char[] readPassword(InputStream in) throws IOException {
System.out.println(:"Sending pin has 9876");
return "9876".toCharArray();
And this is the output
Error in login : java.lang.NullPointerException
Generating 1,024 bit RSA key pair and self-signed certificate (SHA1WithRSA)
for: CN=192.168.1.1, OU=test, O=test., L=test, ST=test, C=IN
keytool error: java.security.KeyStoreException: sun.security.pkcs11.wrapper.PKCS11Exception: CKR_USER_NOT_LOGGED_IN
Thanks again

I cannot get my iPad 2 to work with VPN provider.

I cannot get my iPad 2 to work with my VPN service provider. Using OS 4.3.3. iPad purchased in the USA. Have heard there are issues with iPad 2 and VPN support. Any suggestions?

You can try this ... hold down on the sleep button and the power button at the same time for about 10 seconds until you see the Apple logo on the screen, release the buttons and see if the iPad restarts and you can use it.

My blackberry is not working with my service provider

my O2 blackberry stop working with all Nigeria service provider, what could be the root cause of this

Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is Tmobile Locked Iphone 5S going to work with European T-mobile Sim Card?

Hello Guys
I just bought T-mobile locked Iphone 5S here in US, but I'm going to europe soon, and i'm wondering if this same phone will work with European T-mobile provider.
I know every country in US has T-mobile, but i was wondering if its going to work? I dont see the reason why it shouldn't, but you never know, maybe something in the sistem is different. This phone is Model A1533, and i need to use SIM card here to use it.
Thank You!
Mario

It might be better to pose that question to T-Mobile. You will likely have to get a "local" sim card when you arrive.

Can After Effects work with an Intel Iris Pro chipset ?

hello
sorry for my english
i have a Mac Book Pro 2,3 Ghz, ssd 500 Go, 16 Go Ram, and graphic chipset Intel Iris Pro.
I want to work with After Effects, but i have a problem with 3D
is it normal ?
thank you for your help (i want to be sure before buying After Effects)
Franck

AE is mainly Open GL so yes it should work with the Iris Pro provided you have the latest driver. The only problem would be if Intel's driver did not include the Open GL version that Adobe is using.
Eric
ADK

CME 7.1 with SCCP 7940G phones and SIP connection to a VOIP provider - inbound outbound fails

Here's a quick and dirty diagram of a CME 7.1 configuration. The phone can all call each other but something is not quite right with the SIP provider. The registrar and SIP registration pieces are working but most of the configuration examples that I've seen make me think that the CME router was being used as the edge device to the internet. From my drawing, you can see that is not the case here. My edge device is a Cisco ASA5505 with 9.2.x software running. I might be missing something in the SIP gateway knowledge department. Without diving into the configuration, I'm wondering if SIP messages are failing for calls because of NAT'ing? Trying to do searches has been tricky because I keep running into information that is more about setting up CME for SIP phones or just getting SIP to work between CME and a SIP provider. I have that part working. I'm just a bit unsure about how an SCCP 7940G gets an outbound call or even gets one to come in.
When I dial from my cell phone to the pilot number, there are no rings, it just goes to the VOIP provider's voice mail. When I try to dial out, I get a fast busy.
So, is NAT a consideration? Will the SIP gateway set up a call (forward) via the pre-established SIP connection? Yeah, I do sound like a newb.
If anyone has good information about, let's say, an inbound call and how that traffic flow works.
Thanks!

Have you configured your ASA to either NAT the IP address of the CME router or to do port forwarding for port 5060?

SPA112 not registering with voip provider

Hello, I have been trying for weeks to have my SPA112 working but can't make it. My voip provider (voip.ms) says that my device doesn't seem to be working fine. I'm a little new to voip and would like some help to troubleshoot.
Firmware is the latest (Version 1.2.1 (004)), we have tried many ports, put my router in DMZ, etc. All I get is Registration State: Failed
I know my account info is good since I able to register with X-Lite and Zoiper.
Any idea?
Thanks.

I have the same problem. I didn't realise it was happening for quite some time. Then my provider (Three, Australia) wasted my time with service calls and failed attempts to fix it. Finally it went to the store for a few weeks. By the time it went in, the problem had gone from failed txt receipt to failed calls and eventually the phone just shut down completely I think?
Now, a few weeks later, I've recently been told that people are unsuccessful trying to txt me again. So, again, it's taken weeks to become aware of the problem and I have to take it in tomorrow (at last). Today, I'm told people couldn't call me either.
If I'd gone in to repair everytime I had a prob I should have had a replacement long ago. Is mine just a bad unit or are these all this bad?
Does anyone know how you can go about swapping a handset without being penalised for wanting a functioning unit ? Mine will be out of warrantee in just over a month and, unless there's a miracle at the service centre, it'll need work again a week or two after the anniversary of my purchase.
Three say they can't swap it because they don't have any stock. I just want a reliable phone that syncs with my mac. I don't use it for anything other than calls, sms, diary and alarm clock so I can't be straining it to capacity.
Any suggestions welcome.
Thanks,
mouldfield

I have made a website using iweb, as this will no longer be supported by apple, does that mean the gallery I have created on my website will no longer work even though I am hosting it with a different hosting provider

I have made a website using iweb, as this will no longer be supported by apple, does that mean the gallery I have created on my website will no longer work even though I am hosting it with a different hosting provider. Will the other widgets no longer work?

There are a few things that won't work on other hosting sites; hit counters and pop-up slide shows for sure.
See http://oldtoadstutorials.net/No.iW11.html for more info, and/or the iWeb forum at https://discussions.apple.com/community/ilife/iweb

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

What version of Pages?
There are one or two of us here who are not intimately acquainted with your particular set-up.
Peter

SOAPException: Local provider only works with URLEndpoints

Hi,
I'm writing a JAXM client that uses a messaging provider. Right after the message is sent out by providerConnection.send( ebxmlMessage ), I get an SOAPException:
javax.xml.soap.SOAPException: Local provider only works with URLEndpoints
at com.sun.xml.messaging.client.p2p.HttpSOAPConnection.call(HttpSOAPConn
ection.java:77)
at com.sun.xml.messaging.provider.ToBeSentProcessor.processMessage(Messa
gingProvider.java:298)
at com.sun.xml.messaging.provider.MessageProcessor.run(MessagingProvider
.java:227)
[ERROR] MessageProcessor(toBeSent) - -Processing Message Failed <javax.xml.soap.
SOAPException: Local provider only works with URLEndpoints>
I used jwsdp ea2 for developing the JAXM client. I'm confused by the exception, because I used ProviderConnection and got an exception for Local Provider (SOAPConnection).
Any comments?
Thanks!

Hello Subaru,
Now i am also trying to send ebXml messages using JAXM provider connection.I have configured provider connection using provider admin tool.
But getting an error as follows
provider(toBeDispatched) - -Processing Message Failed Client http:/localhost:8080/ebXMLServerCom/ebXMLServerCom Not Connected
My jwsdp version is 1_0_01. I think in 1.2 there is no support for JAXM right?
Could you please help me?
Reshma

Managed ODP provider work with global or windows passwords

I'm trying out the new Oracle.ManagedDataAccess.dll release 12.1.0.1.0. When I use a traditional oracle managed user name and password it works fine. However when I test with a password that is set as "global" in the dba_users view and is set to be linked with my windows password it doesn't work. I simply get an invalid user/password error message. Is this supposed to work with this version of the managed provider or will it be made available in a future release? Unfortunately I'm not going to be able to utilize all the goodness of the managed provider until support for this is added.

Do you use Oracle Internet Directory?

Every time I use the internet the pages keep reloading every 10-20 seconds. worked with my internet provider for over a year thinking it was their fault, but it turns out it's my computer. Can anybody help? Thanks.

Every time I'm using the internet, my pages reload every 10-20 seconds. Very aggravating. I worked with my internet provider for a year thinking it was their fault, but it turns out to be my computer, not the internet provider. Can anybody tell me why this is happening? Thank you.

Hi Mary,
Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens.

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem?

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem? Is the ethernet route less efficent that going throught the internet connection? If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall? Thanks for help on this!

Ok, so are you saying that your Internet is or isn't working? Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)? If it is working this way, then a new modem isn't going to solve a problem with your Internet not working. If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow. If it runs fine this way and then slows back down when you go back through your router there is something else going on. Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any? Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.

My iPhone 4s will not connect to my yahoo account following the recent update. It appears with Error 1032. I have tried deleting the account resetting my phone, changing the password - none of this has worked. Could you please provide me with some advice?

My iPhone 4s will not connect to my yahoo account following the recent update. It appears with Error 1032. I have tried deleting the account resetting my phone, changing the password - none of this has worked. Could you please provide me with some advice?

I had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub.

PAP2 to work with a diferent VoIP Provider

Similar Messages

Maybe you are looking for