Paper miss-match problem

I have an HP 2640 Officejet printer.  The printer is not  worked proprerly  well since I purchased it.I am having a problem.i am not able to print any single page in normal quality in colour and black &white also.when i am trying to print in norma quality  printer shows this message  "Paper Size mismatch".i  am using standard size A4 paper. but if i select draft quality then printer print the page without any error.

Hi @Prasad5393,
Welcome to the HP Forums!
I noticed that you are getting a paper mismatch error with your HP 2640 on Windows 8. I am sorry to hear this, but happy to help!  
According to your printer's specifications, this is an unsupported paper size for this printer. A4 paper is normally 210 by 297 millimetres (8.27 in x 11.7 in). The supported paper sizes for this printer are:
U.S. Letter: 216 x 279 mm (8.5 x 11 inches)
U.S. Legal: 216 x 356 mm (8.5 x 14 inches)
216 x 330 mm (8.5 x 13.0 inches)
U.S. Executive: 184 x 267 mm (7.25 x 10.5 inches)
B5 (JIS): 182 x 257 mm (7.17 x 10.12 inches)
100 x 150 mm (3.9 x 5.9 inches)
216 x 330 mm (8.5 x 13.0 inches)
127 x 203 mm (5.0 x 8.0 inches)
However, you might be able to get around this by assigning an alternate driver, and then setting a custom paper size. Please, see this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R. To learn how to assign an alternate driver.  Otherwise, I would suggest to use a different type of paper according to this printer's specifications.
I would also recommend this guide, 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing,
Hope this clears things up, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • Paper miss match error

    Dear HP
     I have a problem in my HP Designjet plotter T520 paper mismatch error.while i am printing the autocad 2012 drawing in multisheet tray A3 format it showing me the erroemessage as below
    Error:-"The document size is 460mm while the printer paper using 296mm choos the following option"
    if anybody knows please send me the reply as early as possible

    Hello there,
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums Printers - Designjet & Large Format.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Envelopes on C6380 - Paper miss match

    Hi,
    I am trying to print an envelope from Microsoft word with the Photosmart C6380.
    I load the envelope into the main paper try and start printing... once the printer has pulled the envelope half way in an error message shows up on the screen saying "Paper missmatch" and only the option to cancel the job.
    I would really  appreciate any suggestions!
    TIA

    Hello,
    I am sorry to hear about the Paper Mismatch error. I would like to help. I have looked into this issue for you and I have found a specific guide for you to troubleshoot your issue.
    'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing in Microsoft Word
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Version miss-match problems (UnsupportedClassVersionError)

    Hello all,
    I'm getting
    Error Thrown: java.lang.UnsupportedClassVersionError: com/sun/jndi/ldap/LdapCtxFactory (Unsupported major.minor version 48.0)
    When I do new InitialDirContext(env);
    The applicaton server I am using has its own version JNDI which I think is not the same version I'm using to compile my source, and I'm using j2se 1.4 jar files. Which jar file do I need to replace to get this versioning problem fixed?
    thanks in advance for your help.

    Hi,
    The LdapCtxFactory.class file is located in rt.jar. I wouldn't replace this one with a jar file from a previous version.
    You could either use a previous jdk (not only the rt.jar file), or use the code located at the following url to modify the version numbers of your class files:
    http://www.stephenkelvin.de/MerlinPatch/
    I was able to fix a similar problem with this patch. Note that this will update ALL the jar files it can find in your jdk directory.
    Hope this helps,
    Kurt.

  • When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

    When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • Help needed with missing data problem in CRVS2010

    We recently upgraded the reporting engine in our product to use Crystal Reports for Visual Studio 2010 (previously engine was CR9). Our quote report, which has numerous subreports and lots of conditional formatting, started losing data when a quote took more than a single page to be printed. We knew the SQL results included the data, but the report was not printing those lines at all or sometimes printing a partial line. In addition, the running total on the report would exclude the lines that were being missed on the next page. In one example submitted by a customer, 3 lines were skipped between pages.
    I think I have identified two potential issues that document the possibility of data not being included in the report.
    The first potential issue is an issue with the "suppress blank section" option being checked. This issue is supposedly fixed with ADAPT01483793, being released someday with service pack 2 for CRVS2010.
    The second potential issue is using shared variables. This issue is supposedly fixed with ADAPT01484308, also targeted for SP2.
    Our quote report does not explicitly use shared variables with any of the subreports, but it does have several subreports, each in its own section that has the "supress blank section" option checked. We have other reports that use this feature, as well, and they are not exhibiting the problem.
    One different thing about the quote report is that it has a section with multiple suppression options selected. The section has a conditional suppression formula, which controls whether the section is included at all within the report. The section also has the suppress blank section option selected. There are multiple fields within the report that are each conditionally suppressed. In theory, the section's suppress formula could evaluate to true, yet all of the fields within the section are suppressed (due to null values), and then the "suppress blank section" option would kick in.
    The missing data only seems to happen when the section is not being suppressed, and at least one of the fields is being included in the report. If I clear the "suppress blank section" check box, and change the section formula to also include the rules applied to the fields in the section, the missing data problem seems to be resolved.
    Is this related to ADAPT01483793? Will it be fixed in service pack 2?
    If more details are needed, I would be happy to provide a sample report with stored data.

    Hi Don,
    Have a look at the Record Selection formula in CR Designer ( stand alone ) and when exported to RPT format opening that report in the Designer also. 
    There's been a few issues with => logic in the record selection formula. It could be you are running into this problem. Look for NOT inserted into your selection formula.
    Oh and SP2 is coming out shortly so it may resolve the issue. But if you want you could purchase a support, or if you have a support contract then create a case in SMP and get a rep to work with you to debug the issue.
    If you have not try the Trial Version of CR 2011, put it on a VM-ware image or Test PC so you don't corrupt anything for production and have a look at and test it in that designer also. If you purchase a case and it is a bug then you'll get a credit back for the case.
    Don
    Edited by: Don Williams on Oct 26, 2011 7:40 AM

  • Report miss match error

    hi guys,
    Can anyone tell me what is the easiest way to find out Report miss match error of  bi with r3 report especially in fi.
    thanks in advance,
    regards,
    Bunty.

    lots of ways we can do that.Check your reconciliation reports at your organistaion , then you will get an idea how they compare each time otherwise in general everybody copies data in excel and want to compare.

  • Can't download music - seems to be an iTunes Match problem

    I have iTunes Match activated, which is working fine on my iPad and iPhone.  However I cannot download purchased music onto the iMac. 
    In my household there is a shared iMac and each user has a different login & password.  Only I know my login password.  I have been using iTunes successfully on it for years, and have been using iTunes successfully for about 6 months now.  Auto-download has been disabled for several months now because I don't want everything downloaded automatically.  All has been fine until about a fortnight ago when the iMac stopped downloading newly purchased music whenever I clicked the little iCloud icon.  This is for music that I have successfully purchased and downloaded on my iPhone whilst at work, and now want to listen to at home.  Whenever I click the iCloud icon to download the new song I get an error message telling me that the computer is already associated with an Apple ID, and I have to wait 54 days etc to sign in with a new Apple ID.  However I'm certain no other Apple ID has been used with my account - when I go to the Store menu it is showing my current and correct Apple ID. 
    The most telling proof that my Apple ID is correct on both iMac and iPhone (and iPad as well) is that when I plug the iPhone into the iMac, the new music syncs across EXACTLY as it should - and it can then be played without problems.  Both the phone and the computer are correctly logged in to the same Apple ID, which is the same Apple ID that I use for iTunes Match.  Also when I click Store -> Update iTunes Match there appears to be no Apple ID conflict.
    Obviously this is an iTunes Match problem which I cannot resolve, can someone please provide assistance / advice.
    (iPhone 4 with iOS 6, iMac mid 2010 with Mountain Lion 10.8.2, single Apple ID for iTunes Store, iTunes Match and iCloud).

    you have to convert your videos...
    google videoera ipod converter

  • The missing library problem.

    I understand that there's already a lot of threads about the sudden disappearance of iTunes libraries, however I'm typing this up because I'd like to point out in a bit more detail what I'm seeing happening to my computer, and maybe have a collective of what's going on. This issue has happened to me five times in the last two months since I've updated to iTunes 11. After searching on google I know the missing library problem has existed since the early 2000s; why this glitch has yet to be fixed 13 years later is beyond me. I have personally never had this problem until updating to 11, and seeing the many other threads on here this appears to me to be an issue with this version of the software more than it has been in previous versions.
    Before I continue, I have tried the following to fix it:
    Simply readded my whole library. It was only wiped again a few weeks later.
    Completely uninstalled and reinstalled iTunes. That didn't work either, so it's not just an updating problem.
    What I haven't tried
    Changing where on my computer iTunes is installed. I have no idea where on the computer might be better or if it will change anything. I have iTunes installed on its default location on my local C: disk.
    Importing the music directly from my iPod into iTunes. Can this be done? If so, how? Not everything on my iTunes is a store purchase, most of it is imported CDs and also amazon purchases too. So I don't know if the transfer purchases option works. While this wouldn't fix this current issue, I would like to know how to do this if possible since it would just be a quick fix whenever this happens.
    What is happening:
    So each time this has happened, what occurs is that like many other people, one day I open my iTunes and everything is in order. Then the next, for no reason, all of my libraries are gone but the music is still on my computer, organized in their files the way iTunes had them done so upon importing. I can't use the .itl files in the "previous libraries" folder because they have also been re-written. Upon opening them, even if their last save was on a day I know everything was in working order, opening them does nothing but give me the same blank default page.
    What isn't mentioned in a lot of the posts regarding this issue, is the sudden crop of temporary files in the iTunes folder.
    The ones that have cropped up for me personally are the following:
    iT 1.tmp
    iT 2.tmp
    iT 3.tmp
    iT 4.tmp
    Temp file 1.tmp
    Temp file 2. tmp
    Those were not there the last time I used iTunes, and they're never there on the days I've used it before and it has worked correctly. However every time my library is wiped, these files suddenly appear without fail, every time. I can't open them, I can't do anything with them except delete them. I believe I remember reading somewhere that this might be an issue regarding with how the program is saving the progress of your library changing, and that the temp files are there until it can "officially" save what has happened to your library. While I didn't change anything in my library in the last couple of weeks, I'm assuming this also counts things like play count.
    My own personal opinion
    Seeing just how many threads with this issue are popping up, this leads me to believe that this isn't just a problem with my personal computer or my personal install of iTunes 11. These temp files also lead me to believe that as well. In other words, whatever glitch has existed with iTunes since the early 2000s is for some reason running rampant in version 11.
    TL;DR:
    Please developers, actually look at this library glitch within the program itself. It can't just be an individual user's problem because way too many people are experiencing it.

    No worries. You've probably run into one the other threads I've posted to but I'll add my thoughts here anyway...
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied and renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
    If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
    tt2

  • Auto-reconcilitation Missing matching criteria

    Hi,
    In oracle apps 11i , manual reconcilation for bank statements is done by the user. On the attempt to try Autoreconciliation program the statement lines had the error"Missing matching criteria " in the AutoReconciliation Execution Report.
    I have found in the cash mangement user manual the following:
    The statement line needs at least one of the following criteria to
    match, and all are missing: 1) transaction number; 2) invoice
    number and agent name; 3) invoice number and agent bank
    account.
    But I do not know how to do any of the 3 points above because the bank statement lines entered either manually or uploaded through the interface consist of the following information only:
    POST DATE, VALUE DATE , DR AMOUNT , CR AMOUNT,and BANK TRANSACTION CODE
    What do we have to do to use the auto-reconciliation program?

    Hi,
    We can request bank to provide us information of Transaction number.
    Say a Cheque pmt or receipt is cleared by the bank, the reference of Chk is captured by Bank. These numbers shall be available to you on request along with Bank Transaction Code.
    Regards
    Sridhar

  • A/c doc not created and error msg "Business Area Miss-Match Check input"

    Hi,
    After creation of new Plant and Business area create a invoice , But my accounting document does't created and error msg show "Business Area Miss-Match Please Check Your Input". plz suggest me.
    Regards,
    Sohail

    Dear Sohail Rahman,
    Looks like the Business area has not been properly assigned.
    Business area can be created for three combinations:
    1. Business area by sales area
    2. Business area by plant and division
    3. Business area by plant and item division
    In your case, check whether the business area is maintained for the combination of plant/division and plant/item division.
    Hope this helps
    Thanks
    Murtuza

  • Server 2012R2- RDS Farm Certificate Miss-Match on Session Hosts

    Hi Guys,
    I've another RDS2012R2 issue. Internal and external domains do not match. External: domain.com.au; Internal: domain.com.net.
    I'm getting certificate miss-match errors when connecting to the Farm/RemoteApps.
    I have performed the follow fixes:
    Change published FQDN for Server 2012 or 2012 R2 RDS Deployment (http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80). This resolved the original issue where I was getting a certificate miss-match error externally
    for the FQDN of the server.
    Updated the RDP-Tcp certificate used on the Session Host Servers. This was to resolve an issue where using mstsc to RDP to the farm externally(via gateway) would give a Certificate is not trusted error on the RDSH side.
    Now whenever RDWeb is used to launch a RemoteApp or the farm, I get a certificate miss match error as the RDSH server is called RDS1-TCC.domain.com.net and the certificate is for remote.domain.com.au.
    I rolled back the last change so that RemoteApps and the Farm would work successfully internally without certificate issues. How do I go about resolving the certificate errors?
    For extra background details see my orignal thread, It was marked as answered when only 1 out of 2 issues was resolved. http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS
    Cheers,
    Ben

    Hi Ben,
    Thank you for posting in Windows Server Forum.
    In your case, I can suggest you to check that the certificate must match the FQDN of the server. If you are creating SSL certificate then it must be signed by trusted authority and also the certificate must be stored under “local computer/personal store“.
    Also you can buy the certificate from 3rd party which is wild card certificate and only 1 certificate can be used for your network. Please check below links for more information regarding certificate issue.
    1. Certificate Requirements for Windows 2008 R2 and Windows 2012 Remote Desktop Services
    2. Configuring RDS 2012 Certificates and SSO
    3. Windows 2012 RDS Certificate mismatch
    Hope it helps!
    Thanks,
    Dharmesh

  • Missing Pictures problem

    Missing Pictures problem, I work with Adobe Illustrator CS2 at work & CS3 at home but i have the problem with both. I have a problem with missing pictures from time to time after saving the file & moving the image from original location. I know you have to link the images/files and leave then where the are or you can embeded them. So in my option box i un select the link the files box & i still get the missing files problem, when re-opening the AI file.
    Does anybody know why? Or what I can do to avoid this?
    Thanks

    steve fairbairn wrote:
    Always try to keep your pictures in the same folder as your artwork.
    However you can also make aliases of your pictures and keep them in the folder.
    Aliases are better at tracing their origins than Illy is.
    Steve,
    Could you expand on that a bit please...  the "make aliases of your pictures", i mean...
    TIA,
    JJ

  • FS10N Balance Miss match

    Hello,
    On the Date 31.03.2010 I gave taken a report from FS10N for my Bank Gl. But now I have again run the report, and I am getting different value for that particular date.
    Example - 31.03.2010 *** Balance. 100 Rs.
                     Now I have again run the FS10N, its shows 31.03.2010 *** Balance 120 Rs.
    As a result the balance is miss match. Can you please tell me the reason?
    Thanks

    Hi,
    Please check if you have included any other documents for that period.
    Double click on the total and check the same in FS10n.
    The other reasn could be, if you have not carried forward the balances from the previous year to this year, the balances will mmismatch.
    Please check if you have carried the year end closure in f.16.
    Hope this helps,
    Thanks,
    Shilpa.

  • Quantity Miss match  -REM

    Hi,
    This is Repititve Manufacturing.
    After creation of basics (BOM,Rate routing etc), I have done standard cost run, Marked & Released.
    Then Backflush is done for the Header material and material document posted several times.
    When I Validate the quantities in CK13N with Material document MB03, I'm getting quantity miss match for the components of type Packaging.
    In BOM, the quantity of the component is 14000 for which header's base qty is 1000.
    The component has scrap of 2.2%.
    I did backflush for header of 100 qty.So the component including the scrap it came 1430.8 i.e 1431.
    It is getting rounded off to 1431 in material document & during backflush because of its UOM - EA.
    But when I'm validating in CK13N by selecting User Entry and providing 100 qty for Header, it shows 1428.56 for the same component.
    Kindly help me in solving this.
    Regards,
    Sankar.N

    Hi,
    Are you using separate costing BOM.Coz looking at your scenario either it should consider scrap or not. Means it could hv value either 1400 or 1431.But, the value which you are getting is different.Whats the costing lot size & price unit in accounting view?

Maybe you are looking for