"Paper Receipt Exists" check ON by default

Hello,
When I create a Travel Expense Report through portal, as I select any Trip Expense Type, the "Paper Receipt Exists" gets checked by default.
I do not want it to be ticked automatically. I want it should be selected by user. I think there is a FM where it is hard coded.
Can anyone let me know how and where it is checked?
Thanks
Edited by: chandra chandra on Mar 22, 2011 11:50 AM

Thaks for your answer.
Tcode FITVFELD - the field is PTK03-PAPER_RECEIPT has options to set field is visible and  field ready for Input but not 'invisible'. For some reasons I need to make this field visible and input enabled (default it should be un-checked.)
MP56TF30 (program SAPMP56T) is for tcode 'TRIP'. I guess that there could be different place for Paper receiipt is check for Portal access.
This issue is not resolved yet.

Similar Messages

  • Storage bin ZZ1 998 AUFNAHME does not exist (check your entry)

    While in MIGO transaction, trying to post goods receipt with movement type 561, the system gives the error :
    Storage bin ZZ1 998 AUFNAHME does not exist (check your entry)
    How can I fix this error ?

    I had the exact same error yesterday, still I haven't figure it out yet.
    I can add that you must have that storage location connected with WM, and there's something wrong in this integration.
    Cherrs.

  • Restrict cancellation of outbound delivery if goods receipt exist

    Dear All;
    I wan to ask you if i have cross company po-post goods issue  in the supplying plant-post goods receipt in the receiving plant.
    the problem is my client can cancel goods issue before cancellation of goods receipt that makes negative stock in stock in transit.
    how can i restrict cancellation of outbound delivery if the goods receipt exist
    regards

    Hi,
       There is NO stock in transit in case of cross company STO and system will allow delivery cancellation even after GR. The standard design is well explained in the note: 25220 - No stock in transit with cross-company purchase orders
        If you want to restrict the delivery doc cancellation, you have to go for development. Please check the BAdI: LE_SHP_DELIVERY_PROC as mentioned in the thread: Re: How to restrict reversal of PGI after GR is made for a Inter company STO
    Regards,
    AKPT

  • Goods receipt Capacity check in PO creation- EHP2

    Hi
    I have activated business function LOG_MM_CI_1 in our ECC 6.0 system . I have also activated Goods receipt capacity check and subsequent settings in customization . I am able to view the GR capacity check icon in Purchase order creation (ME21N). When I click this icon by selecting the line item , system does not perform any function . I have read in SAP documentation that Vendor can be assigned to door . I am not able to find this assignment in the system . Not sure whether this function is only applicable to retail system and not to SAP R/3 . If some one worked on this functionality , kindly request you to throw some light on this functionality .
    with regards,
    Joseph Anand B

    Same thing is happening to me right now .. did you found out what the error was,, or what was missing ?
    Please reply soon as I have a demo on the same in two days..
    Regards
    Digant.

  • How to check whether a default browser is opened in the operating system?

    Hi,
    I am newbie here. During my work, I faced an interesting problem. I need to:
    - check whether a default html browser is opened;
    - check whether the browser is minimized/maximized (simply, a window's state);
    - get an url address typed in the browser.
    If any of these conditions is not met, I have to open the browser in a maximized view with a desired url address. I primarily wanted to do all this in Java, but it came to my mind that I should employ many techniques/technologies and combine them appropriately to complete the functionality. But, which ones? That's the problem. I just recalled Windows API, but I'm not sure if it is of any help... On another forum, some users suggested that I should consider JNI... At this time, I only know how to open a default browser (e.g. with use of the 'browse(URI uri)' method of the 'java.awt.Desktop' class) - that's too little to be proud of. Please give me some hints, maybe links to reasonable discussions, I would greatly appreciate any suggestions how to approach the problem.

    Crosspost! [http://www.java-forums.org/advanced-java/29583-how-check-whether-default-browser-opened-operating-system.html]

  • I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?

    I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?

    I get the same kind of thing..
    I'm on osx 10.7.2 and once I click the soundtrack pro icon I get an error message. I had problems with logic pro & my digi002r soundcard midi drivers but now is fixed (using a midi adapter).
    here is the code:
    Process:         Soundtrack Pro [1705]
    Path:            /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
    Identifier:      com.apple.soundtrackpro
    Version:         3.0.1 (960)
    Build Info:      SoundtrackProProject-9600000~277
    Code Type:       X86 (Native)
    Parent Process:  launchd [140]
    Date/Time:       2011-10-18 13:12:05.201 +0200
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          195725 sec
    Crashes Since Last Report:           3
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      23728D81-590B-4C3A-8C67-1709945CD132
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /Library/Application Support/ProApps/*/ProFX.framework/Versions/A/ProFX
      Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
      Reason: image not found
    Binary Images:
        0x1000 -   0x7f7ff8  com.apple.soundtrackpro (3.0.1 - 960) <77CF322B-8BBE-AAEA-173F-75A237035319> /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
      0x947000 -   0x94bfe6 +STPInterleave (??? - ???) <E87D1F34-6D97-63DB-454C-CF3D1B03F8E5> /Applications/Soundtrack Pro.app/Contents/Frameworks/STPInterleave.framework/Versions/A/STPInterleave
      0x952000 -   0x98ffff  com.apple.vmutils (4.2.1 - 107) <43B3BFA5-8362-3EBD-B44B-32DCE9885082> /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
      0x9a9000 -   0x9f5ffb  com.apple.audio.midi.CoreMIDI (1.8 - 42) <CBD34EBC-0FFD-34B4-B55A-BE1F61EF4BD8> /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
      0xa18000 -   0xc3eff7  com.apple.prokit (7.1.1 - 1511) <498819A4-1BDD-3671-8796-E11865BCFBCE> /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
      0xd49000 -   0xd49fff  com.apple.iokit.dvcomponentglue (2.0.7 - 2.0.7) <1CFA5944-AB33-3A41-B4D2-4A624A514C0D> /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue
      0xd4d000 -   0xd54fff  com.apple.AEProfiling (1.2 - 22) <43A46C32-8E13-82DD-8AF1-2A40690BF810> /Applications/Soundtrack Pro.app/Contents/Frameworks/AEProfiling.framework/Versions/A/AEProfiling
      0xd5e000 -   0xd6dfff  com.apple.AERegistration (1.2 - 77) <5D18C47F-6F9E-0C4C-8875-24A14A97186D> /Applications/Soundtrack Pro.app/Contents/Frameworks/AERegistration.framework/Versions/A/AERegistration
      0xd81000 -   0xd83fff  com.apple.ExceptionHandling (1.5 - 10) <6CA9446C-7EF9-35EE-BDF2-AA8D51E93E9E> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
      0xd89000 -   0xe49fff  com.apple.omf_framework (1.1.0 - 1.0) <ED5F21BC-18CD-D7F7-3D2E-F7F856BC0D40> /Applications/Soundtrack Pro.app/Contents/Frameworks/OMF.framework/Versions/A/OMF
    0x11000000 - 0x1102afeb  com.apple.proapps.ControlSurfaceSupport (2.0 - 68) <BD914236-49D8-9C9A-E8D6-CBC1738850B3> /Applications/Soundtrack Pro.app/Contents/Frameworks/ControlSurfaceSupport.framework/Versions/A/ControlS urfaceSupport
    0x8fe88000 - 0x8feba9c7  dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
    0x90840000 - 0x90992fff  com.apple.audio.toolbox.AudioToolbox (1.7.1 - 1.7.1) <7646E131-08EE-3D72-ADA2-4A61C562B36E> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x90993000 - 0x90993ff2  com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x91e60000 - 0x92036fe3  com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x924a8000 - 0x92509ffb  com.apple.audio.CoreAudio (4.0.1 - 4.0.1) <089D78E0-46A6-38DB-9545-7F35CC815939> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x93281000 - 0x9328ffff  com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    0x93331000 - 0x93331fff  com.apple.vecLib (3.7 - vecLib 3.7) <8CCF99BF-A4B7-3C01-9219-B83D2AE5F82A> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
    0x93332000 - 0x93493ffb  com.apple.QuartzCore (1.7 - 270.0) <0916DA83-6400-3FEA-BC53-5F4BA4D126EC> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
    0x94326000 - 0x9436dfff  com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x94420000 - 0x946a5fe3  com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
    0x97dd0000 - 0x98082ff7  com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x99d12000 - 0x99d76fff  com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x9adc8000 - 0x9adc8fff  com.apple.audio.units.AudioUnit (1.7.1 - 1.7.1) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x9aef1000 - 0x9aef1fff  com.apple.Carbon (153 - 153) <6FF98F0F-2CDE-3888-A304-4ED447D24CE3> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x9b2ec000 - 0x9b2ecfff  com.apple.Cocoa (6.6 - ???) <650273EF-1ABC-334E-B745-B75AF028F9F4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
    Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
    Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD5000AAKS-402AA0, 500,11 GB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 3
    USB Device: USB to Serial-ATA bridge, 0x04fc  (SUNPLUS TECHNOLOGY CO., LTD.), 0x0c25, 0xfa120000 / 6
    USB Device: iLok, 0x088e, 0x5036, 0xfa130000 / 5
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: UM-2G, 0x0582  (Roland Corporation), 0x0106, 0xfd140000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
    FireWire Device: Digi 002Rack, Digidesign, 400mbit_speed
    thanks everyone
    e

  • How do I make my already existing check boxes "checkable" [so I can check and uncheck them on PDF Expert]

    How do I make my already existing check boxes on a (PDF Document) checkable - So I can check and uncheck them on PDF Expert or Annotate 101.
    I am using ADOBE Acrobat PRO with millions of options, but no easy "here is how to do the one thing you want to do" anywhere within reason.
    Please help me.
    Thank You

    Can you check and uncheck the boxes in Acrobat?

  • Storage bin 320 902  does not exist (check your entry)

    Storage bin 320 902  does not exist (check your entry)
    Message no. L9009
    I have created the new bins in the interim storage area 902. In the table LPAG also the storage bins are visible. I am creating thre GR for the PO in the system but still getting the error in as above . Please help me out.

    Hi
    check the movement type configuration which is used. So u can find what storage bin is used for the particular movement type.
    If not existed create the interimbin.
    Hope this helps you...
    Rgds,
    Kris.

  • Organizational unit 00000000 does not exist; check entries

    Hi Experts,
    While creating the business partner in transaction BBPMAININT the error is
    Organizational unit 00000000 does not exist; check entries
    where do i have to make entry of the organisation unit
    , already i have entered the purchase organisation.
    Thanks

    Hello,
    Can anyone Explain me How can i Create Vendor  EBP using T Code ppoma_bbp.
    I am using Tcode bbpgetvd for for Replicating Vendor Master to mySRM System and it is Having field of
    Organuzational Object for Suppliers 
    Object ID ______
    I have given Object id which is in assigned is ppoma_bbp (Organizational Structure).
    I have Tried to assign Object ID of Organizational unit which is assign with Purchasing Org. and Purchasing Grp.
    Please Help Me anybody.
    Thanks in Advance.

  • Error - Account group  does not exist, check classification assignment

    Hi Guys,
    I am having an BP replication issue from CRM to R3 when i create BP from Web IC with role UTIL_IC. BP gets replicated to R3 if i create BP from GUI.
    Bdoc Error - Account group  does not exist, check classification assignment
    i have completed all the required configuration as below
    Setup of no range for BP and assigned to grouping
    PIDE settings in R3
    Setup if account identification profile in IS solutions
    Thanks,
    Nitin

    Nitin,
    Refer to [this|BP replication error; &[this|Contact Person Replication From CRM to R/3; thread.

  • MS ssis service: registry setting specifying configuration file does not exist. attempting to load default configuration file. SQLIService100 - event id 274

    window 2008 R2 server ---- after installing SQL 2008 R2 then applying sp2 / sp3 I noted a warning -
    Note this server had SQL 2008 R2 uninstalled previously.
    MS ssis service: registry setting specifying configuration file does not exist. attempting to load default configuration file.
    SQLIService100 - source
    event id- 274
    user - N/A
    Task category - service control.
    Do we need to fix something and how do we fix this warning event?
    dsk

    You could search online for this warning. I was able to find http://superuser.com/questions/346264/event-log-warning-registry-setting-specifying-configuration-file-does-not-exist
    where the fix is "in your registry, go to:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTS\ServiceConfigFile
    or
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\100\ServiceConfigFile
    if value is empty then add in:
    C:\Program Files\Microsoft SQL Server\100\DTS\Binn\MsDtsSrvr.ini.xml"
    Arthur
    MyBlog
    Twitter

  • Error 1051429. Analytical services Product Existent check Fails

    Hi,
    We want to externalize users from native to shared services.
    Note: The Enviornment is UNIX.
    Following activities were carried out from our end.
    1. Configured database. (Oracle)
    2. Registered with shared services.
    3. Deployed to Application server. (Tomcat)
    4. Ensured that administration services are up after registration.
    5. Ensured shared services are working fine.
    6. Backed up .sec files, config files and bak files from bin directory and deleted all users except admin user from the
    mgt console.
    7. We then went on to externalize the users from the Console. This did not succeed.
    Error message given was:-
    Error 1051429. Analytical services Product Existent check Fails
    against the shared services server with error. [Unable to connect to
        shares services , make sure the shared services is running and try
        again.]
    When we did not succeed we went to user management console and created a new user , gave it all rights and then tried externalizing that user. But that too failed.
    More things done were :-
    1 Changed the netdelay settings in config to 3 hours.
    2 Set unix server time with shared services time in sync.
    3 Re-Registered the Analytical Services as above.
    4 Using management console established sync with analytic services (thru mgt console).
    Nothing works. Hope someone shall provide a solution soon.
    Thanks in advance for the same.
    Regards
    Balakrishnan

    Hi Balakrishnan,
    Just check whether services called 'OpenLdap' and 'Shared Service' are running or not if not then please start them and then try to externize users.
    Atul K,

  • Real time file exist check...

    Hello all,
    Would like to ask, is there any way in ABAP to create a real-time file(S) exist check let's say in local PC drive/directory?
    Thanks in advance!

    Hi,
    1. If you are talking about real time,
      then in that case the z program will continuously run (in foreground ofcourse).
    It will continually check (eg. every 1 second) for the existence of file - using the FM or class method.
    2. In such continous checking, we have to use the timer concept.
    3. Below is a program which continuosly
       checks for the existence of file
       D:\abc.txt
      (u can change that file in the program)
    If the file is not found (continously) it keeps on
       displaying 'File NOT Found'
       if found it displays 'File FOUND'
    4. Just copy paste to get a taste of it.
    5.
    REPORT abc NO STANDARD PAGE HEADING.
    DATA : wa(72) TYPE c.
    CLASS my DEFINITION.
    PUBLIC SECTION.
    METHODS : run_handler FOR EVENT finished OF cl_gui_timer.
    ENDCLASS. "my DEFINITION
    DATA timer TYPE REF TO cl_gui_timer.
    DATA myh TYPE REF TO my.
    * CLASS my IMPLEMENTATION
    CLASS my IMPLEMENTATION.
    METHOD run_handler.
    CALL METHOD timer->run.
    PERFORM mylist.
    ENDMETHOD. "run_handler
    ENDCLASS. "my IMPLEMENTATION
    *-------------- Init
    INITIALIZATION.
    CREATE OBJECT timer.
    CREATE OBJECT myh.
    SET HANDLER myh->run_handler FOR ALL INSTANCES.
    * PARAMETERS : a TYPE c.
    *----------- End of selection
    START-OF-SELECTION.
    WRITE sy-uzeit TO wa.
    WRITE wa.
    timer->interval = '0.5'.
    CALL METHOD timer->run.
    FORM mylist.
    *WRITE sy-uzeit TO wa.
    data : filesize type i.
    CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
      EXPORTING
        FNAME                = 'D:\abc.txt'
    IMPORTING
    *   EXIST                =
    *   ISDIR                =
       FILESIZE             = filesize
    EXCEPTIONS
       FILEINFO_ERROR       = 1
       OTHERS               = 2
    if filesize  = -1.
    wa = 'File NOT Found'.
    else.
    wa = 'File FOUND !!!'.
    endif.
    MODIFY LINE 1 LINE VALUE FROM wa.
    ENDFORM. "MYLIST
    regards,
    amit m.

  • MB1C Error "Storage Bin 450 does not exist Check your entry"

    When doing MB1C error message says
    :"Storage Bin 450 does not exist Check your entry"
    I have maintained all movement types, storage location well. I have not created any storage Bin then why it is asking for this?
    Please help for solution with steps.

    Thanks for your answer. My problem is different but I resolved it myself as under:
    Log Execution->Shipping>Picking>Lean WM-->Define control parameter and no. Range....All three tabs were set.Here in check box I tick mark as Active Lean WM.
    Then went to Control Plant /Storage location/Warehouse No Assignment
    Here Plant/Storage Location/Warehouse were given
    Degree of activation=1
    store tye for picking in LWM=005
    So Lean WM was activated. So in MB1c this error was disappeared as I had activated Lean WM.
    But another error came "There is no item category assigned to account 799999/4050" This is related to field status group in G/L account but still not solved.I am missing Commitment Item in tab Create/Bank/Interest in my G/L account. I tried to run program RM07CUFA in SE 38 saying error No MM group in 3 tabs but could not further identified.
    Above issue was resolved sothread is closed.

  • I was working on numerous songs in Logic Pro 9, and for some reason 2 of the songs would not bounce. I get an error message: Error in parameter list / Not an existing volume, and no default volume / Bad positioning information / Bad drive number

    I was doing some minor editing in Logic Pro 9.1.8, like adding some plug-ins to audio and midi tracks on numerous songs. Most of the songs I had no problem bouncing. For some reason 2 of the songs I tried to bounce kept showing me this error message:
    "Error in parameter list / Not an existing volume, and no default volume / Bad positioning information / Bad drive number" result code=-50.
    The songs open and play fine, but won't let me bounce. I've worked with Logic for a few years and this has never happened. Any suggestions?
    Thanks,
    Johnny

    Fixed! Ran disk utilities and repaired my external HD.

Maybe you are looking for