Parallel Query - using hints for multiple 'from' tables
Currently I am running the following (simplified) query:
INSERT /*+ APPEND */ INTO NEW_TAB (ID)
SELECT DISTINCT T1.BIG_ID
FROM BIG_TAB1 T1, BIG_TAB2 T2
WHERE T1.BIG_ID = T2.ID2
AND T2.METHOD = 1
AND T1.CODE IN ( /*16 codes here*/ );When this migrates to the production platform the DBAs have asked me to code it for parallel processing.
We implement 4 processors for parallel processing and so usually I would do the following hint between INSERT and INTO;
/*+ PARALLEL (BIG_TAB1, 4) */As my query here accesses two tables how would I modify this statement to make it run in parallel? Would it be;
INSERT /*+ PARALLEL (BIG_TAB1, 4) */ /*+ PARALLEL (BIG_TAB2, 4) */ INTO NEW_TAB (ID)
SELECT DISTINCT T1.BIG_ID?
Thanks for any help!
fakelvis
Ah, brilliant.
Thank you!
Also, on a related note, I'm using a query of similar size in a PL/SQL script. This big query is in a cursor and the data selected here is then inserted into another table depending on a few criteria.
For this to run on parallel, would the parallel hint be placed in the cursor's SELECT query or on the verious INSERTs within the body of the code? I'm assuming it's in the actual SELECT query of the cursor, but just thought I would check as I'm new to hints!
Thanks again!
Similar Messages
-
Hi Dear All,
We have two real time infocubes and two aggregation levels based on these cubes in one multiprovider
first cube1 is like
char1| char2| keyfig_coefficient(single value for each combination of char1 and char2)
same aggregation level1
(we have input query to fill coefficients by one responsible user)
second cube2 is like
char1| char2| keyfig_quantity| keyfig_result
same aggregation level2
Input ready query should be like (for all other users of different org units)
char1|char2|keyfig_coeff| keyfig_quant(for input) | keyfig_result = keyfig_coeff*keyfig_quant(calculated value, should be saved to cube2)
And we don't have pregenerated lines in cube2, users have to add new lines themselves by wad.
Question is, what is the optimal (easiest) way to make calculation and save result data to cube2 where keyfigures for calculation should be used from different infoproviders. I need just a hint.
Appreciate any help.
Nadya.I found decision, agregation levels sould be based on multiprovider, not included.
-
Query to conbine 2 lines from table
Hi all
I have a problem in constructing sql query to combine 2 lines from table in Oracle 11g database.
I will explain, i have one table containing call transactions loaded in one table from 2 different sources, one is from IN which is tagged IN and the other from MSC which is tagged MSC. One subscriber call is registered in IN and MSC and loaded in the table. The problem is the data from IN contains the call duration but not contains Cell information. I'm creating datamart to combine the two lines in one lines but i don't know how to do from query.
Here is an overview if my data:
Source Orig Dest startdate cellid duration
MSC 550000 220000 15/05/2012 02:03:29 235e
IN 550000 220000 15/05/2012 02:03:30 10
MSC 550000 220000 15/05/2012 02:04:00 235e
IN 550000 220000 15/05/2012 02:03:59 15
MSC 550000 220001 15/05/2012 02:06:18 235f
IN 550000 220001 15/05/2012 02:06:18 60
The line i want to have is for each line of IN source i sjhould have the cellid like below:
IN 550000 220000 15/05/2012 02:03:30 235e 10
IN 550000 220000 15/05/2012 02:03:59 235e 15
IN 550000 220001 15/05/2012 02:06:18 235f 60
The query should linked by Orig, Dest and date but for some rows there are difference in seconds.
Please help.
Lucienot.user13513449 wrote:
Hi
Thanks for the reply, here below the create table script and some insert data example:
CREATE TABLE TRANS
CALLTRANSTYPE NVARCHAR2(6),
ORIGANI NVARCHAR2(40),
TERMANI NVARCHAR2(40),
STARTTIME DATE,
STOPTIME DATE,
CELLID NVARCHAR2(10),
CONNECTSECONDS NUMBER,
SWITCHCALLCHARGE NUMBER
0 555283806 222591626 05/15/2012 00:10:04 05/15/2012 00:13:31 03e9:7565 O 207.00
Insert into trans values('MSG','555283806','222591626',to_date('05/15/2012 00:10:04','mm/dd/yyyy hh24:mi:ss'),to_date('05/15/2012 00:13:31','mm/dd/yyyy hh24:mi:ss'),'03e9:7565',10,null); ...It looks like there's some mistake at the end of the CREATE TABLE statement and before the first INSERT statement. Is that supposed to be another INSERT statement?
Test your code and, if necessary, correct it before you post it.
Is that sample data supposed to produce the results you posted originally?
If so, explain, step by step, ho9w you get them.
If not, post the results you want from that smaple data, formatted, between \ tags, as explained in the forum FAQ {message:id=9360002}
In my orioginal message, I said "ORDER BY" where I meant "GROUP BY". If you change that, and use your new table and column names, does the query I posted earlier do what you want? If not, point out where it is wrong, and show how you might get the right results in those places. -
Creating a PO Using BAPI For Multiple PLants Or Multiple Line Items
Hi All
Can you please suggest me how to create a Purchase Order Using BAPI_PO_Create1 for Multiple Plants Or for Multiple Line items. The Requirement is like the PO is for single material for single vendor but for mulple stores i.e plants
NOte: Suggest me the Creation of PO for MUltiple Line items or for multiple plants Using BAPI . Hope you people will give me the needful.
Regards
Shivakumar BandariHi,
Here is the sample code to do that...
*---> po header data
wa_poheader-vendor = your vendor..
wa_poheader-doc_type = Your doc type..check with Functional contact....
wa_poheader-purch_org = Purchasing Org..
wa_poheader-pur_group = Purchasing Group
*---> po header data (change toolbar)
wa_poheaderx-vendor = 'X'.
wa_poheaderx-doc_type = 'X'.
wa_poheaderx-purch_org = 'X'.
wa_poheaderx-pur_group = 'X'.
*---> poitem data
data: item like ekpo-ebelp.
item = '0010'.
loop at t_parts.
it_poitem-po_item = '00010'.
IT_POITEM-PLANT = Plant..
IT_POITEM-STGE_LOC = Sloc...
*---> poitemx (item data change toolbar)
it_poitemx-po_item = '0010'.
it_poitemx-po_itemx = 'X'.
IT_POITEMX-PLANT = 'X'.
IT_POITEMX-STGE_LOC = 'X'.
*---> add record's to internal table
APPEND: it_poitem,
it_poitemx.
endloop.
*call bapi_po_create1
CLEAR v_ebeln.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_poheader
poheaderx = wa_poheaderx
IMPORTING
exppurchaseorder = v_ebeln
TABLES
return = it_return
poitem = it_poitem
poitemx = it_poitemx.
*---> check the return table for error message
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc NE 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
endif.
Thanks,
Murali -
Last Used status for Reports, Transactions, Tables ??
Dear all,
Kindly let me know how to find the last used status for
Reports, Transactions, Tables ??
This is very urgent, Please do the needful.
Waiting for the responses..
Cheers,
Virendra.Here the issue is same.
STAT transaction is asking for the time which is the main hurdle.
I am hanging around with STAT transaction but not finding
how to getover the time specification.
if i dont specify the time i takes by default the 2 or minutes back from the current time.
which is not useful for me at all.
My main requirement is that my seniors want to know what are all reports or transaction or tables which are not used at what last time ?
so if i have to specify the time wont be so useful for me.
And writing a report 'll not gain anything coz internal SAP report is take time as main parameter.
Regards,
Virendra. -
Can I use ifile for slideshow from sd card?
Can I use ifile for slideshow from sd card? Without importing.
Hi Abby,
You've posted your question in the Numbers for Mac community, where the topic of discussion is issues and techniques involving the Mac versions of Apple's spreadsheet application Numbers.
From the description on the developer's website, it appears iFile is a file management application for iOS, used for importing and exporting files between computers (Mac or Windows) and iOS devices (iPhone, iPad, iPod). The closest to an appropriate community here would appear to be Using iPad, or one of the other device-baed communities. I've rquested a transfer of your quetion to that community.
Rgards,
Barry -
Need to use Hint for Select Query 11g
Hi,
I have a select query which is fetching data from multiple table.
I just need 10 or less rows, already I m using rownum <=10
Could you tell which is the better choice for using HINT.
/*+ FIRST_ROWS(10) */ (or) /*+ all_rows */
Thanks.On Oracle 11.2.0.3 and 11.1.0.7 on my test table with an ORDER BY in the query, I found FIRST_ROWS using the index to get sorted rows and ALL_ROWS retrieving 10 rows from a full scan and then sorting them.
On Oracle I didn't find any difference in plan on a different, physically smaller, table.
For the ALL_ROWS version the optimiser already knows that there will only be 10 rows returned.
The performance difference: As usual, only use FIRST_ROWS if you actually intend to fetch less than the full data set. If you intend to fetch all 10 rows, use ALL_ROWS, which should be the default (taken from the optimizer_mode system parameter). -
Using models for multiple one-to-many table relationships
Hi there!
I have a database with tables that have one-to-many relationships. They
are laid out with a standard join tables:
A A_B B B_C C
a_id a_id b_id b_id c_id
b_id c_id
and has 1 A for n of B. In some cases, the B table also joins with
another table for yet more information.
My question: what technique should I use to organize a database of this
type into JATO Models?
I could create an AModel, for example, that would have a set of query
field descriptors for the information relevant from tables A and B. But
then how do I query table C when that information is necessary? Or,
more to the point, create information in C when a new entry in B is created.
Do the models use each other, or is that left up to the view bean (seems
incorrect for data isolation).
Any pointers appreciated,
ByronByron,
You can create a separate "modifying" model for each table and do
inserts/deletes/updates in a transaction across the tables with the
three models. That's really the easy part.
The somewhat more tedious part is the "join" models, but not hard to do.
You just have to decide what you need from the different tables and
quite possibly create multiple join models for different select scenarios.
So let's just run through a simple two table join model.
Create a SQL model. I usually name them based on the table joins. Let's
use a somewhat more real example:
table = customer
columns = custid, firstname, lastname, email
table = address
columns = addrid (seqid), custid (fk), type
('w'ork,'h'ome,'b'illing,'s'hipping,'o'ther), address1, address2, city,
state, zip
Suppose we want to select a customer and show a list of all his/her
addresses.
I would create a SQL model class (extending QueryModelBase of course)
called CustomerAddressJoinModel (this naming convention gets tough with
three or more tables, so you have to be creative).
In that model, I would create the fields just like any single table
model. You need only include the columns you need. Maybe you create one
join model that only has custid, lastname, firstname, type, city, zip.
OK, so we only cut out 2 columns, but you get the point. If you had a
table with lots of columns with data you rarely need to display and/or
update, then you can exclude them. Probably a slick way to exclude
dynamically, but this is straight forward.
Another join model could have all the columns of both tables.
So the trick is to set the static where criteria (using the
setStaticWhereCriteria method) in the model's constructor. I think the
sql model template has this in it.
setStaticWhereCriteria(customer.custid=address.custid);
Now you just set your criteria like any other model, and execute it.
For a 3 table join, you just set the static criteria like this:
tableA.aid=tableB.aid AND tableB.bid=tableC.bid
does that make sense?
You can also set the "modifying table" (setModifyingTable(table) - i
think that's right) in the model and inserts/updates/deletes will only
operate on that table within the model. Problem is maybe in the the
field binding in your views. You may want to select from one field, and
modify using another field. Can be done though, just not directly supported.
In the next release of JATO, you will be able to set a display fields
binding for read and write using different fields and even different models.
craig
Byron Servies wrote:
Hi there!
I have a database with tables that have one-to-many relationships. They
are laid out with a standard join tables:
A A_B B B_C C
a_id a_id b_id b_id c_id
b_id c_id
and has 1 A for n of B. In some cases, the B table also joins with
another table for yet more information.
My question: what technique should I use to organize a database of this
type into JATO Models?
I could create an AModel, for example, that would have a set of query
field descriptors for the information relevant from tables A and B. But
then how do I query table C when that information is necessary? Or,
more to the point, create information in C when a new entry in B is created.
Do the models use each other, or is that left up to the view bean (seems
incorrect for data isolation).
Any pointers appreciated,
Byron
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp -
COPA Assessment Cycle using KEU5 for multiple controlling areas
Hello All,
There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
Regards,
SoumyaHi Soumya,
Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
Pls find the following text from SAP Help...
Parallel Processing of Cycles of an Allocation Type
Use
Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
Srikanth Munnaluri -
Query in fetching invoice amount from table EKBE
Hi all,
In my custom report the invoice amount is taken from the field ekbe-dmbtr and is displayed wrongly.
For a particular Purchase order the account assignment table EKKN has only one entry and for the same Purchase order the Purchase order history table EKBE has two entries.
For eg :
Table EKKN
Purchase order Item Seq Access number
20900753 000001 01
Table EKBE
Purchase order Item Seq Access number Material Doc Number Amount(DMBTR)
20900753 000001 01 5105606685 500
20900753 000001 99 5105606685 500
There is a loop at EKBE within the loop there is a IF condition which checks if
IF EKBE-PO number EQ EKKN-PO number and
EKBE-Item = EKKO-Item and
EKBE-Seq Access Number = EKKN-Seq Access number.
When the above condition is satisfied then the EKBE-DMBTR is added to the o/p field.
ENdloop.
In this case(several account exists for one mat doc,accounting dept use occasionally such cases) since EKKN does not hv seq access number 99 it does not take the second line into consideration so the amount displayed in the output has the value 500 instead of expected value 1000(sum of both the lines 01 and 99)
Can you please offer suggestion on how to solve this issue.I want to know if i can ommit the Seq access number check in the IF condition.In that case i would get the expected result 1000,but will it affect some other functionality.Or is there any other way to solve this.Hi,
We cannot say that Seq Access number is unimportant as it depends on the requirements of the client.....
Seq Access is a number defining the account assignment i. e which account should be posted in a transaction ( see documentation of the data element of seq Access ).
We can omit checking of sequential number . Use read table EKKN instead of IF condition as we can check for multiple values of table EKKN.
Thanks,
Viquar Iqbal -
Queries with date functions using PreparedStatement for multiple DB
I am developing application that uses DB independant queries. I am using preparedstatement to process the queries. I need to use date functions for query selection criteria.
for eg.
selecting the list of employees who had joined in the last 15 days
selecting list of employees who had joined between two dates etc.
where Date Joined field is a Timestamp value. To extract date no DB specific function can be used.
If I use setMonth, setYear etc.. to set params in the pstmt the query becomes complex in the above case. Can any one throw some light on how to do the above in preparedstatement or any other better alternative.
Tx a lotHi,
I did not mean that way. I presume that there is a timestamp value (may be a date too) column in the table. Then based upon your requirement (say before 15 days) pass the value as date (or time stamp) in the query as a parameter.
String qry = "select * from myTable where join_date <= ?";
stmt.setDate(1,myDate); // this is where you will have to manipulate the value to suit your DB timestamp or date value; you will have compatibility issues with util.Date and sql.Date so use Calendar class to satisfy.Feel free to mail me if you need further clarifications to [email protected]
Cheers,
Sekar -
Why parallel query use direct path read ??
I think because access buffer cache needs latch and buffer block lock,if parallel query don't use direct path read ,parallel query will be impacted by Serialization mechanism such as latch and lock .so oracle choose direct path read to avoid it .
anybody have a good idea ??
Edited by: jinyu on Dec 8, 2008 7:52 AMjinyu wrote:
I think because access buffer cache needs latch and buffer block lock,if parallel query don't use direct path read ,parallel query will be impacted by Serialization mechanism such as latch and lock .so oracle choose direct path read to avoid it .Jinyu,
basically, yes I think that's it. The purpose of parallel query is to scan a very large segment, because the overhead of communication between the processes and maintaining/starting up the parallel slave renders the operation inefficient for small segments.
Therefore I guess the assumption is that the segment to scan is probably very large, the fraction of the blocks in the buffer cache would be only very small in comparison to the blocks to scan, and therefore the reduced overhead of directly reading the blocks bypassing all the serialization issues of the buffer cache should outweigh the "un-buffered" blocks issue and save the buffer cache for objects that benefit more from being cached.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/ -
Using SPSiteDataQuery for multiple Site Collections
Hi All,
I would like to query five contact lists on multiple site collections. I can query the lists using SPSiteDataQuery if they are within the same site collection, but I can not query the lists over multiple site collections.
Is there a method like SPSiteDataQuery that I can use to query lists over multiple Site Collections?
Many Thanks,
ColinHi,
As you have mentioned that: SPSiteDataQuery which can query multiple webs within the same site collection, but not across multiple site collections. You can't accomplish that easily.
The solution evolves from first using the SPSiteDataQuery class to run a query upon each site collection and then aggregating the results.
For detailed information, refer to the following article:
https://oidatsmyleg.wordpress.com/2009/08/13/cross-site-collection-query-almost/
Besides, here is a similar requirement post, you can take a look at:
http://sharepoint.stackexchange.com/questions/114329/accessing-list-data-in-multiple-site-collections
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
SQL Query to get match string from table
Hi Experts,
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
5 rows selected.
WITH T AS
SELECT 'JOHN' FIRSTNAME,'PLAYER' LASTNAME FROM DUAL UNION ALL
SELECT 'MICHEAL','SMITH' LASTNAME FROM DUAL UNION ALL
SELECT 'SCOTT','MANAGER' LASTNAME FROM DUAL UNION ALL
SELECT 'FIRST NAME','LAST NAME' LASTNAME FROM DUAL
)SELECT * FROM T;
Input String to my Query will be "JOHN NAME SMITH"
I need to match the input string to provide result based on Firstname OR Lastname from table.
How can i acheive this?
Thanks,what the problem in constructing??
you can use something like this....
declare
vStrng varchar2(100) := 'JOHN NAME SMITH';
v_temp varchar2(1000):= 'SELECT DISTINCT firstname,lastname FROM employees,
(SELECT regexp_substr('''||vStrng||''',''[[:alpha:]]+'',1,level) parsedstr
FROM dual
CONNECT BY level<=LENGTH(regexp_replace('''||vStrng||''',''[[:alpha:]]'',''''))+1
) WHERE instr(firstname,parsedstr)>0 OR instr(lastname,parsedstr) >0';
vSQL varchar2(1000):= 'SELECT ENAME,EMPNO,DEPT.DEPTNO FROM EMP,DEPT WHERE EMP.DEPTNO=DEPT.DEPTNO AND (firstname,lastname) in ('||v_temp||')';
begin
--rest of your code....
end;edit: In the same way...you can use any of the above mentioned solutions..
Ravi Kumar
Edited by: ravikumar.sv on Apr 6, 2010 4:12 PM -
Pls help me to create SO using BDC for multiple line items (VA01)
Hi all,
My requirement is to create SO for multiple line items in ECC6.0
My recording for VA01 is like this.
start-of-selection.
perform open_group.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'BDC_CURSOR'
'VBAK-AUART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-AUART'
'ZOR'.
perform bdc_field using 'VBAK-VKORG'
'2000'.
perform bdc_field using 'VBAK-VTWEG'
'10'.
perform bdc_field using 'VBAK-SPART'
'05'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(01)'.
perform bdc_field using 'RV45A-MABNR(01)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(01)'
' 10'.
perform bdc_field using 'RV45A-KWMENG(01)'
' 55'.
perform bdc_field using 'VBAP-WERKS(01)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.2'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1200'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(05)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(02)'.
perform bdc_field using 'RV45A-MABNR(02)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(02)'
' 11'.
perform bdc_field using 'RV45A-KWMENG(02)'
' 66'.
perform bdc_field using 'VBAP-WERKS(02)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.1'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1250'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(05)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(01)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(01)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'FDGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(02)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(02)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'GFGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSEX'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'5'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=KKAU'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\02'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-KONDA'.
perform bdc_field using 'VBAK-AUDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-VKBUR'
'IN15'.
perform bdc_field using 'VBAK-WAERK'
'INR'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-KDGRP'
'CF'.
perform bdc_field using 'VBKD-PLTYP'
'01'.
perform bdc_field using 'VBKD-KONDA'
'01'.
perform bdc_field using 'VBKD-BZIRK'
'NORTH'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\03'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-VSART'.
perform bdc_field using 'VBAK-VSBED'
'01'.
perform bdc_field using 'VBKD-KZAZU'
'X'.
perform bdc_field using 'VBKD-VSART'
'ER'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\05'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-TAXK1'
'1'.
perform bdc_field using 'VBAK-TAXK3'
'l'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-ZLSCH'.
perform bdc_field using 'VBKD-KTGRD'
'01'.
perform bdc_field using 'VBKD-ZLSCH'
'c'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'BDFBFDB'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\11'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=KSTC'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(02)'.
perform bdc_field using 'J_STMAINT-ANWS(01)'
perform bdc_field using 'J_STMAINT-ANWS(02)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(03)'.
perform bdc_field using 'J_STMAINT-ANWS(02)'
perform bdc_field using 'J_STMAINT-ANWS(03)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(04)'.
perform bdc_field using 'J_STMAINT-ANWS(03)'
perform bdc_field using 'J_STMAINT-ANWS(04)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'BDC_CURSOR'
'JOSTD-OBJNR'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-TXT_VBELN'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01'.
perform close_group.
if in excel file one row of records means i am succesfully creating SO.
But for multiple i am not getting idea to create SO.
My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
VBAK-AUART :Order Type
VBAK-VKORG : Sales Org
VBAK-VTWEG : Distri Channel
VBAK-SPART : Division
VBAK-KUNNR : Sold-to-Party
VBPA-KUNNAR : Ship-to-Party
VBAK-BSTNK : PO No
VBAK-BSTDK : PO Date
VBAP-MATNR : Material No
A_THICK_MM
A_WIDTH_MM
A_EQUIVALENT_SPEC
A_COIL_INNER_DIA_MM
A_BATCH_WEIGHT_MIN_SI
A_BATCH_WEIGHT_MAX_SI
VBAP-KWMENG : Qty
VBAP-WERKS : Delivery Plant
VBKD-INCO2 : Incoterm2
VBKD-KONDA : Price Group
VBKD-VSART : Shipping Type
VBAK-TAXK1 : Cust Tax-1
VBAK-TAXK2 : Cust Tax-2
VBAK-TAXK3 : Cust Tax-3
VBAK-TAXK4 : Cust Tax-4
VBKD-ZLSCH : Payment Method
VBAP-TAXM1 : Mat tax clss-1
VBAP-TAXM2 : Mat tax clss-2
VBAP-TAXM3 : Mat tax clss-3
VBAP-TAXM4 : Mat tax clss-4
VBAP-POSEX : IMPS Order No
VBKD-BSTKD_E : old SO in 4.6c
VBKD-POSEX_E : old SO Item in 4.6c
Text Id : TDC No
Text Id-ES10 : Special Inst(Unld const & Veh)
ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192, 1,PO 444 AMD 1,Spl Inst
based on VBKD-BSTKD_E line items has to create.
if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
if it is changed to 3011193 then only different SO.
PLs If any one knows solution pls write some sample code for me.
If u send that code to my mail id also very thankful.
Pls help me this is urgent requirement.
[email protected]
Thanks & Regards,
J.LokeshIf u want to add Items data, u have to handle the Table control by writing the complete code.
U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
Narendra
Maybe you are looking for
-
How do I send a document converted from pdf to word?
Do I save the converted pdf to word document on an usb so I can send it in an email?
-
How to create a georaster object?
Hi, I type this codes to create a georaster object. but there is error msg. SDO_GEOR.createBlank( rasterType IN INTEGER, ultCoord IN SDO_NUMBER_ARRAY, dimSizes IN SDO_NUMBER_ARRAY, cellValue IN NUMBER, rasterDataTable IN VARCHAR2 DEFAULT NULL, raster
-
Revision: 7765 Author: [email protected] Date: 2009-06-11 15:58:18 -0700 (Thu, 11 Jun 2009) Log Message: Fixing up some copyrights, adding copyrights, and fixing up some legal-eese for the Flash Component Kit For Flex. Also, updating the MXP to
-
I'm getting error (-3259) whilst trying to update to version 4.3.2.
I'm wondering if anyone can help me here. I try to update my iPhone as it says there is an update available, and it fully downloads. It then tries to verify the download and I get an error (-3259). Can anyone help me with this as it would be greatly
-
How to draw an arc of a circle in flash pro cc,considering center and radius as parameters?
Please help to draw curves in flash pro cc,considering center and radius as parameters...