Parameterizing the text data recorded using SAPGUI.

Hi all,
Is it possible to record the text input we are providing at item data level say for example,Packing item text for the transaction VA01 using SAPGUI recording.
I am able to capture the text input after recording those values inside but I am not able to parameterize so that I can change the data everytime to be given as input.
If it is possible to parameterize what steps that we need to followed?
It is urgent.
Regards,
Vishwakarma.

i dont think u can use recording method to upload ur LONG TEXTS since these texts are not stored as other fields in the table. they can instead be put using FM 'SAVE_TEXT' in which u need to provide the id,object and name. These parameters u can have an idea by going into the SApscript editor of the text ( in the transaction itself, below the box where u enter the text, u have a DETAIL button, click it), then in the editor GOTO>HEADER> u ll c the parameters.
Text Name
Language
Text ID
Text object
These r to be passed to the FM to upload the text properly. The parameter NAME & ID depends on the item no.
other 2 are fixed.
Hope it helps.
regards,
Bikash

Similar Messages

How to check the master data records in using SE16 transaction?

Hi,
Can you please help me to check the master data records using SE16 transaction?
Loaded master data for Characteristic and want to check the records in the master data tables.
Thank you for your help!
Lakshmi

Hi!
Welcome to SDN.
you have to check the master data tables.
soo in Se16 you have to select the appropriate master data table and view the data.
following thread explains about masterdata tables
MasterData table?
regards
mohan
Message was edited by:
Mohan Krishna

Identifing duplicate master data records using the MDM Import Manager

hi all
I read the Topis "How to identify duplicate master data records using the MDM Import Manager</b>"
i tried to create import maps and to set rules. but when i import them it creates the new vendor records for each rule with rest of the fields blank.
when i import vendor data all the three fields i.e Match rate , match type and match group are blank.
My Question is :
I am getting vendor data from SAP R/3.
In which source (in lookup xml file or data xml file) do i have to include these above three fields and how all the rules will be reflected in repository?

Hi Sheetal
Here we go when do you Import any data (vendor master) please follow the following steps;
1. First of all apply the map to the source data
2. In the Match Record tab there are 3 possiblities
   a.[Remote Key] : Checks the current source rec with
     repository along with all the fields - This is
     default
   b.Remove [Remote key] - by double click the same; and
     choose any single fields like Vendor Number or
     name - Then the current record will be matched
     with the repository based on the field.
   c.Instead of single field you can choose combination
     also.
3. Based on the Match results, match class will be set
   automatically;
   a. None
   b. Single
   c. Multiple
4. Then Match Type
    a.Exact-All the individual value matches are Equal.
    b.Partial-At least one value match is Equal and at least one Undefined; no value matches are Not Equal.
    c.Conflict-At least one value match is Equal and at least one value match is Not Equal.
5. then chek the Import status and Execute the import.
Hope this helps you.
cheers
Alexander
Note: Pls dont forget reward points.

How to use DS's text processing to parsel the text data stored in DB table?

I want to use DS's text processing to parse the text data stored in a database table, but all the demo I see is parsing text from a flat file. I tried with the blueprint sample and edit the input from a flat file to database table, but can not map the column with the base entityExtraction. anyone can give me a guide or example? thanks so much!
regards,
Bin

Still looking for some ansewers. Can any one help me?

Error 4 when updating the text data

When i am trying to load the data using IP i am facing the issue Error 4 when updating the text data.Please suggest me
Edited by: srikanth reddy612 on Dec 15, 2011 12:45 PM

hi srikanth,
you might have selected given lowercase data
and please check in the Infoobject the lowercase Checkbox is unchecked then it will allow you to update from IP.
also check in the Datasource fields tab whether particular field is unchecked with lowercase.
if checked all records you are pushing will have to be in uppercase.
thanks
Sankaresh S

How do I write a vi that will save graph data and text data (related to the graph) so the next time I want to view the graph data the text data is included in the read vi?

I am new at writing vi's and hope you may be able to help. I would like to create a vi that will graph measurements taken from a daq device. I would like to include text data that a user can choose from (example: machine number, test circuit, load cell type) that will stay with the graph so when the graph is viewed at a later time the text data (explaining parts of the graph) will display with the graph data. I have included a vi I am using to capture and display a force value. Any help would be greatly appreicated.
Attachments:
force.vi ‏500 KB

What you want is a DATALOG file:
When you save a file, use the BUNDLE function to bundle your machine number, test circuit, whatever (include a few spare fields), plus your graph data. Get the graph data from the source, or use a local variable of the graph itself.
Wire the bundle output to the DATALOG TYPE of a NEW FILE function. (I presume you'll use a FILE DIALOG set to SAVE FILE to choose a file path).
Write the same bundle output to the DATA input of a WRITE FILE function.
Use a CLOSE FILE function to (ahem) close the file.
When you want to read a file, use a FILE DIALOG set to EXISTING FILE (or some other means) to specify what file to read. Wire the same cluster type to the DATALOG TYPE of the FILE DIALOG, so that it will only
offer files of the correct type.
When you have a file path chosen, wire the bundle to the DATALOG TYPE input of a FILE OPEN operation.
Use a FILE READ to read a single cluster - the output of FILE READ will be a cluster of the right type.
Use a CLOSE FILE function to....
Out of the FILE READ function, you can UNBUNDLE BY NAME the data and send to the graph and the other fields, or, if you're clever, you can use a cluster on the screen, and not unbundle it. That's harder though, since you probably want the text fields to be controls (inputs) and the graph to be an indicator (output).
Hope that helps.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

Problems with ECATT recording using SAPGUI Record

Hello,
I got a problem with my recording. All the prerequisites are done. The problem is, that when the recording is done i don't see the recording in SECATT testcase. Normally when you do a recording you see at the bottom right of the gui a red/white icon active. When i do a recording now, this red/white icon isn't active.
For my it's a very strange error. I hope somebody can give me a hint where i can look,
Thanks in advance.
Kind regards,
Maarten.

Maarten,
First when you start the recording using SAPGUI, you will get the pop-up whether to record this new session. You need to select Yes before continuing your recording.
Secondly check the scripting values in the target system whether it is enabled or disabled using the RZ11 transaction. Mostly SAP Basis team have authorization to change these values for us.
Here is the parameter we need to check in RZ11 - sapgui/user_scripting. It should be TRUE.
Let me know if this helps.

Error While recording using Sapgui

Hi,
In eCATT when i'm trying to record using Sapgui after clicking on Start Recording Button, I'm getting an error "A script is trying to attach to GUI".... Could any one give me the solution for this ASAP.

Hi,
I'm working with 7,0 EP version (SP11) and 6,0 for R/3.
I've created the profile as a copy of the standard and then I changed the period type and some others fields, but the problem is with the period type. If I put weekly it works but if I put anything else it's giving me an error in the EP when I try to record time.
Any idea?
KR

Get the latest date record in Query

Hi, Expert:
Please help on this:
The requirement is to get the the latest date record in Query. For example:
Data in provider:
Plant          date            amount
A01         2007/04/08      30
A01         2007/06/09      70
A01         2007/12/08      30
we only want the query display:
A01         2007/12/08      30
I have tried exception aggregation, but it does not work. Any ideas are highly appreciated.

Or you can model the date as a key figure after 0date_kyf and set aggregation to max, you'll get something like
select plant, amount, max(date) from ... group by plant, amount
used it for inventory reporting (materials and their last movement date, days from the last movement etc.) and worked well.

Creating the text data source for 0OI_LIFNR(TD: Carrier (Number of vendor a

Hi
Have to create the text data source for this characteristic. Basically it is the same as 0Vendor here.
I want to make it delta enabled.
Am creating it on the view BIW_LFA1T(same as 0vendor)
Can anyone advise what can I use to make it delta enabled without any code.
Can I use numeric pointer like the 0Vendor_text.
Many Thanks and regards,
Kate.

when defining a data source through the admin web page, don't add '!' in front of the password.
! is needed only when configuring a data source in the mapViewerConfig.xml file.

Is there a way to increase the icon size (and the text below) without using zoom? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Is there a way to increase the icon size (and the text below) without using zoom in iOS 7? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Hello Apple.
It seems you have gone to great lengths to improve accessibility in many areas of the iPad. Why was this obvious problem with icon text size missed? (It's not with the Mac.). And for so long too.
Do you employ people with actual accessibility problems to help you do UI design?
I think too, that some buttons are too close for people who might have motor control problems.
I love my iPad but I fear as I age, the iPad might not keep up with me.

How to change the text under RECORD WORKING TIME IN ESS.

Hi,
How to change the text under RECORD WORKING TIME in ESS.
Is there any setting at page or iview level?
Please help me.
Regards,
Thirun.

Hi,
If it is standard business package ,then check home page framework
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4
Regards
Koti Reddy

SMS_DISCOVERY_DATA_MANAGER Message ID 2636 and 620. Discovery Data Manager failed to process the discovery data record (DDR)

Hi
I'm seeing this critical error on my primary.
SMS_DISCOVERY_DATA_MANAGER Message ID 2636 and 620.
Discovery data manager failed to process the discovery data record (DDR)"D:\Prog.....\inboxes\auth\ddm.box\userddrsonly\adu650dh.DDR", because it cannot update the data source.
Where these ddr's are actually under ddm.box\userddrsonly\BAD_DDRS folder
I see a ton of DDR files in that folder. Not sure if I can delete them, so I moved them to a temp folder. AD User discovery keeps generating them.
Any help ?
Thanks
UK

Check the ddm.log file for more information.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time .

Is it possible to extract the text and images using PHP

Hi friends,
Is it possible to extract the text and images using PHP, in the same order as it is in the PDF?
Else is it possible extract the same as XML using PHP, or ASP
I googled it but its in vain, any help is appreciated.
Thanks in advance.

Dear Mike,
Thanks for your quick reply,
I mean is it possible to parse the PDF line by line using the PHP.
I extracted the whole text but couldn't the images. Since the PDF's images are decoded using various methods like DCTDecode, JPXDecode, etc.
The text is decoded with FlateDecode, which i breaked using a function in PHP.
Thanks,

Parameterizing the text data recorded using SAPGUI.

Similar Messages

Maybe you are looking for