Parameters for Time-Controlled Synchronization

HI All
I am trying to Automate Syncronsation in my Client i.e. I want Syncronisation to automatically start after a fixed amout of time.
In the device configuration assigned to my device, I have assigned a Parameter set which has the following two parameters:
MobileEngine.Sync.TimedSyncActive = TRUE
MobileEngine.Sync.TimedSyncTimeInterval = 60000.
I have Synced once.
But still it is not working. The Sync which should begin every 60 seconds is not working.
Waiting for some answers...
Ankur

Hi SivaKumar...
The method you explained was perfectly right and this was working all the time, and I never knew it
Actually after doing all the required settings, I was just staring at the Client screen and my watch.. and was wishing the Sync button to be pushed automatically after a minute and the sync will start progressing before my eyes.
But it never happened this way.. kinda it was happening in the background and I never realised it till recent
Everything is working fine now.
Thanks a lot for your time.
@Oliver: I got what you were trying to say, but everything is solved now. Thanks for your time and knowledge .
Thanks,
Ankur

Similar Messages

  • Scripting configuration for Dynamic Controls

    I would like to put the configuration of Dynamic Controls (Process/Service Controls' selector values, URI, etc.) in a script to invoke from a command line. Any suggestions?

    Are you want to run this script at development time before deploying or what do you want to achieve? Upcoming SP4 will offer a solution to retrieve config parameters for certain controls dynamically at runtime (and change it on the fly).
    -Kai

  • Error when scheduling job for Job Control LO

    Hi all,
    I tried to schedule the job for collective update after I set the job parameter in tcode LBWE for LO Data Extraction. But they said 'Error generating job' without any description why.
    Maybe you can help me about this since I still can't do the delta extraction for LO.
    Thanks and appreciate for your help.
    -Martin Darmawi-

    Hi!
    You have to pass two parameters for job control scheduling.In that you have traffic light for the respective parameters,defaulty those will appear in red.when you have specified parameters,both turns in to green.then you can say start.hope this will helps.....
    Best Regards
    Sunil.

  • Time controlled processing

    Hello All.
    My process consists in creating a text file contaning information of many idoc generated on R3 side.
    I know SAP R3 can send idoc in packs but I don't want my messages to be too big => Thus, Idoc Pack size won't be higher than 100.
    Every day, I will send my packs of idoc to XI in order to create the outbound file.
    With one pack of Idoc no pb but how can I do to create only one file when I would have more than one pack
    I want to know if it is possible without using BPM to build one file at a determined,scheduled moment with all received and not already processed idocs and how ?
    I found in documentations the possibility to maintain filters for time controlled processing (SXMB_ADM).
    Do someone have links about it or explain me the global steps to do what I want.
    Thanks very much

    hi,
    I'm not sure if you understood it correctly
    IDOC packects from R3 are not received as packets in XI
    they are received as one by one...
    so you need a BPM to collect them (to any number you want) anyway
    and BPM gives you many possibilities of telling
    when to stop and then when to create the file...
    Regards,
    michal

  • Control parameters for data transfer

    Hi!
    There are no data in SBIW source system - General Settings - Maintain Control Parameters for Data Transfer.
    How does it have an influence on loading data?

    Hi,
    Maximum size of a data packet in kilo bytes
    The individual records are sent in packages of varying sizes in the data transfer to the Business Information Warehouse. Using these parameters you determine the maximum size of such a package and therefore how much of the main memory may be used for the creation of the data package. SAP recommends a data package size between 10 and 50 MB.
    Frequency with which status Idocs are sent
    With this frequency you establish how many data IDocs should be sent in an Info IDoc.
    Standard settings
    Frequency 1 means, for example, that there is an Info IDoc for every data IDoc. In general, you should choose a frequency between 5 and 10 but not greater than 20.
    Recommendation
    The larger the packet size for a data IDoc, the smaller you should set the frequency. By doing this, you make it possible to get information on the respective data load status in relatively short time periods when uploading data.
    Maximum number of parallel processes for data transfer
    Select a number greater than 0.
    Parallel processes can be set from the SAP core release 3.1I onwards.
    These parameters are, therefore, ignored in releases before 3.1I.
    However, there is a possibility of importing the SAP release 3.1I into earlier releases.
    The more parallel processes that can run the better the performance of your system will be. However, you must bear in mind the number of available dialog processes here.
    It will be fine and more effective if you use sap recomended values in those respective fields

  • Time out parameters for ABAP and JAVA instance

    Hello All,
    We are looking for Time out parameters for our ABAP and JAVA instances.
    As users are complaining that they are getting time out error
    while they are trying to access Cprojects from Portal.
    I was able to check/collect the ABAP instance parameters from SMICM Tcode.
    Can anybody tell me which parameters we need to look for JAVA instance.
    Thanks in advance.
    Regards,
    Amber S

    jstart/shutdownTimeout
    (jstartup/shutdown_timeout)
    Specifies the shutdown timeout, i.e. the grace period for the AS Java instance to shut down before the Java process terminates itself.  Unt is in Seconds. Default is 120
    j2ee/ms/connectTimeout
    (jstartup/wait_for_scs)
    Specifies the timeout for the first connection to the message server. The AS Java instance fails to start if this timeout expires.Unt is in Seconds.Default is  60
    j2ee/ms/reconnectTimeout
    (jstartup/wait_for_reconnect)
    Specifies the timeout for the reconnecting to the message server.The AS Java instance shuts down when this timeout expires.Unt is inSeconds.Default is  3600 (one hour)
    Thanks

  • Travel management-- Control Parameters for Travel Expenses-- Define global

    We have setup provision variants for:
    India, UAE, Africa (since travel expenses in these countries need to be settled in the local currency).
    For each of the above variants, we have done the following settings in IMG node:
    Travel management-->Control Parameters for Travel Expenses --> Define global setting
    I have selected the respective country for the "Country grouping" field. i.e. for India Variant, it is set to India and similarly for UAE etc.
    Is this correct? What is the impact if in India variant this field ("Country grouping) is set to UAE?

    hi
    the settings which you set is right.
    you will have inconsistency between the settings you made in the other areas.

  • How to create a time control for while loop?

    Hello all,
    I would like to control my while loop's execution time. In other words I want to stop while loop's execution after time (in ms) which is set by user. For example user sets 5 seconds to front panel control and a while loop runs and stops after 5 seconds.
    I am not sure is it possible with the while loop. I succeed with the timed loop but it suits badly to my application. Is there any other loops for timed control if it is not possible with while loop? There is also a simple while loop with Random Number (0-1).vi as attachment.
    Best Regards,
    Jick
    Solved!
    Go to Solution.
    Attachments:
    execution time loop.vi ‏6 KB

    hi,
    see this, may be it will help.
    Best luck
    Gaurav k
    Gaurav k
    CLD Certified !!!!!
    Do not forget to Mark solution and to give Kudo if problem is solved.
    Attachments:
    execution time loop.vi ‏9 KB

  • Wrong parameters for multiple targets mapping started in Control Center

    Dear experts,
    I'm newbie for OWB and I got into the following error when I try to start the loading of one my mapping that consists of 2 Cubes as targets:
    INVN_HIST_MAP
    Error
    ORA-06550: line 1, column 847:
    PLS-00306: wrong number or types of arguments in call to 'MAIN'
    ORA-06550: line 1, column 841:
    PL/SQL: Statement ignored
    When I check the the package Main Procedure, I found the number of parameters for 'TRUNCATE_LOAD' and 'AW_EXECUTE_RESULT' doubled compared to the other mappings I have which consist of one target cube only. That explains why I got the error above. My question is whether there's any way to get the Control Center loading work?
    Many thanks!

    Thanks for the reply David. I'm using OWB 10.2.0.4. Is this a known bug? I don't mind splitting into 2 mappings. My only concern is that ~60% of the data processing are overlapping. I'm using MOLAP. Is there a way to share staged table data on 2 different mappings?

  • Is it possible to preserve dynamic run-time shortcut menu updates for a control?

    Hello all,
    I have a question about getting control run-time shortcut menus to persist after adding new items.  I am hopeful that I'm simply missing something simple here.
    Known Information
    I understand the use of the "Shortcut Menu Activation?" event (for the control of interest) which provides the relevant control's menu reference for use with the menu VIs.  No problems there.
    Problem
    I start with a control which has an .rtm file assigned as its run-time shortcut menu.  
    I then generate new items dynamically using the event/menu mechanism noted above.  
    The problem is that there doesn't seem to be a way to *preserve* those newly added items (ie. I have to re-create the new items everytime the menu is *activated*).
    What I observe is that, unless I add all the items every time the right-click event occurs (in the "Shortcut Menu Activation?" event case), it defaults back to the original .rtm menu state.
    Question
    Does anyone know how to either:
    get dynamically added menu items to "stick"
    perhaps dynamically create (new) and load an .rtm for a *control*
    Thanks in advance for any thoughts.  I'm working in LabVIEW 8.6 for this particular project.
    VM

    Looking at the second post link, it seems like you are trying to populate 10,000+ shortcut items on the Shortcut Menu for the control. I'm guessing these are tiered, since I don't think all of them would fit on the screen. If they are tiered, have you tried populating only the top level short cuts, and then populating more as the user navigates down the tree?
    - Regards,
    Beutlich

  • ISight camera exposure time control for astrophotography

    Does anyone know of a way, or an application that allows you to control the shutter speed/exposure time when taking a photo with an external iSight camera?
    I am trying to adapt an external iSight camera for astro-photography.  There are some excellent tutorials on how to remove the optics to expose the ccd, here.  However for certain imaging you need long exposure shots like one could achieve with a DSLR.  iGlasses is great for some control, but according to their customer support, does not allow control of the exposure time.
    For other webcams there are suggested physical modifications including the use of a soldering iron!  I am hoping that someone will be able to point me in the direction of a more elegant software solution!  Most astronomy forum users recommend getting a netbook; I can't believe that this isn't something that a mac cannot do better!
    Hope that some of you out there who know much more than I do can help out.
    Many thanks,
    Phil

    Not for what you are trying to do.
    I don't use anything like you seek, but http://www.outcastsoft.com/ASCASTROIIDC.html offers OS X software for compatible IIDC cameras (other than external iSight.)  According to their site:
    ... Apple's FireWire iSight will never be supported as it lacks IIDC modes we need and is not capable of doing extended CCD exposure times. ...
    If that is accurate, your Mac/OS X choices include acquiring:
    (1) a supported IIDC camera,
    (2) a UVC webcam that can work with something like
         http://www.phoboslab.org/log/2009/07/uvc-camera-control-for-mac-os-x
    (3) or  a DSLR that offers Mac OS X compatible software for the features you need.
    If none of those are acceptable within your needed timeframe, my only remaining suggestion would be to find software that does what you want and then buy whatever camera and computer is compatible with it.
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • Transporting Control Parameters for Actual Data in Profit Center Accounting

    Hi Friends
    Transport type of control parameters for actual data in Profit Center Accounting has been mentioned as Manual, when I try to manually create the Transport Request the Transport option in the Menu is disabled.  Is there any other way to transport this configuration.
    Regards
    P Rajan

    Hi
    I think the settings that you are mentioning is through transaction 1KEF please clarify. Else elaborate where you have set the transport type manual.
    Transport request are the domain of Basis people and is meant for transport from one client to another like quality to production.
    Anand

  • Transport request for Set Control Parameters for Actual Data.

    Hi Viewers,
    I am unable to create the transport request for the below settings
    Controlling->Profit Center Accounting->Basic Settings->Controlling Area Settings->Activate Direct Postings->Set Control Parameters for Actual Data.
    Is it possible to move the request through transport request or do we need to create the settings directly in the target system.
    Thanks
    Aswin.

    Hi,
    Please read the IMG help at the given path.  There are certain profit center accounting settings which cannot be transported directly from the same path, but there is another node in SPRO path for doing this.  If possible I will try to locate the path but I am not sure I can post it immediately as I am not having system handy.
    thanks,
    Kumar

  • OT: Good version control/synchronization program for my Java apps

    Hi,
    I use one of my Java apps on a number of computers in my home, as well as on my work computer. The program is over a meg, but I make changes to it (almost daily) that affect only a few small files. I'd like to find a (preferably free) program that can do something like the following:
    I make a change, then click "update on server." The program sends any modified files (and only modified files) to my web server (whose ftp or ssh information i will have configured in the program).
    Now, when I am on any of computers (which would also have the program I'm looking for installed), I just click "sync to latest version" and it downloads the new files from my server.
    I know Tortoise SVN is supposed to be good for version control, but I can't tell if it can do something like I described above.
    Thanks in advance for any ideas,
    John

    Both Subversion and CVS provide this kind of support. They both have Windows clients that integrate with the Windows file system. For Subversion the commonly used Windows client is Tortoise, for CVS its WinCVS, there are others.
    Subversion is newer and easier to use, but is not supported by as many IDE's as CVS. Eg. JSE8 doesn't support SVN directly, although there is a profile you can install.

  • How can I set up a custom keyboard shortcut for volume control?

    Hi all,
    I use my black MacBook at work, connected to an external monitor and external keyboard. I'm looking for a way to set up the F buttons on my external keyboard as volume control, just as they do on my laptop keyboard. Looking for F3 to F5 to be volume mute, down, and up, respectively.
    I tried going into Keyboard Shortcuts in System Preferences but since there is no menu item for volume control I can't seem to add it. Anyone know how I can go about doing this or what I'm missing?
    Thanks
    Mike

    paste the following into Applescrpt Editor (it's in /Applications/Utilities)
    <pre style="
    font-family: Monaco, 'Courier New', Courier, monospace;
    font-size: 10px;
    margin: 0px;
    padding: 5px;
    border: 1px solid #000000;
    width: 720px;
    color: #000000;
    background-color: #ADD8E6;
    overflow: auto;"
    title="this text can be pasted into the Script Editor">
    set curVolume to output volume of (get volume settings)
    -- work out the new setting
    if curVolume < 96 then
    set newVolume to curVolume + 5
    else
    -- can't go over 100
    set newVolume to 100
    end if
    -- and apply it
    set volume output volume newVolume</pre>
    this script will increase volume by 5 (out of 100) any time you run it. you can adjust this of course. save the script somewhere.
    You can use a 3rd part app launcher to bind a keyboard shortcut to it. I use Butler. there are many others: Quicksilver, ikeys, quickeys, Spark, Launchbar.
    this will work the fastest.
    If you don't want to use 3rd party tools for this you can make a service using automator but that might be a bit slower than the first option. open automator. it will give you a pulldown screen wiuth the choice of what you want to make. choose "service". set it to receive no input and be available in all applications. add the following "run apple script" action to the service
    <pre style="
    font-family: Monaco, 'Courier New', Courier, monospace;
    font-size: 10px;
    margin: 0px;
    padding: 5px;
    border: 1px solid #000000;
    width: 720px;
    color: #000000;
    background-color: #ADD8E6;
    overflow: auto;"
    title="this text can be pasted into the Script Editor">
    on run {input, parameters}
    set curVolume to output volume of (get volume settings)
    -- work out the new setting
    if curVolume < 96 then
    set newVolume to curVolume + 5
    else
    -- can't go over 100
    set newVolume to 100
    end if
    -- and apply it
    set volume output volume newVolume
    end run</pre>
    save the service, go to keyboard system preferences->keyboard shortcuts->services and make a shortcut for the service you just created.

Maybe you are looking for