Parameters sent to BAPI in the data buffer

I have set up a JRA action with the data buffer option (the JRA action passes parameters to a BAPI). Thus, when ECC is not avalaible, the system creates an entry in the data buffer job list. I would like to know if there is any way to get information on the parameters that will be sent to the BAPI in ECC (whence ECC will be available once again).
Thanks,
Aymeric

>>The problem isn't the trim, because the bapi call must contain the spaces.
Are you able to get expected results while testing the BAPI with data containing spaces?
I have seen some cases where you get correct results when you test the RFC in SE 37, but the same data when passed from XI does not get the desired results. It was coz. when testing the RFC in R/3 some user exits are called and the data fets populated in the correct way. Check this.
Regards,
Jaishankar

Similar Messages

  • Create a Purchase order using the BAPI using the data in the XML file.

    Hello Gurus,
    here is the scenario can anyone help me how to proceed explaining the procedure?
    Create a Purchase order using the BAPI using the data in the XML file.
    comprehensive explanations are appreciated.
    thanks in advance.

    hi,
      first use fm "bapi_po_create".
      then use fm "BAPI_ACC_GL_POSTING_POST"
    The demo environment was made with real business scenario in mind, but following subjects need to be addressed in a live implementation:
    •     No exceptions and error handling is implemented, except the order rejection (e.g. partly delivery);
    •     In Navision both XML Ports and the XML DOM has been used to integrate with SAP XI, because XML ports has some drawbacks regarding to Namespaces in XML Documents (mandatory in SAP XI);
    •     A minimum of SAP and Navision customization is required to implement this solution. (e.g. user exit in SAP, Navision XML DOM).

  • Will any of DDL command trigger a data flush from the data buffer to disk?

    Will any of DDL command trigger a data flush from the data buffer to disk?---No.164

    I mean if I issue the DDL commands Such as DROP, TRUNCAE, CREATE, Can these commands trigger a data flush action?

  • Your workout data could not be sent to nike+ because the data could not be

    i have been getting this message while uploading data in itunes after using a cybex arc elliptical machine.
    "your workout data could not be sent to nike+ because the data could not be validated by our server."
    anybody else have this problem and/or solution?

    Hello balbew,
    It looks like you haven't been the only one recently.
    http://forums.nike.com/thread.jspa?messageID=330025
    Try waiting another day or two or trying at a later time to see if that makes a difference.  It could very well be a server side error.
    B-rock

  • GPShell: 0x80100008 (The data buffer to receive returned data... )

    Hi all,
    My test applet generate response of zero bytes of length based in Le field in APDU command. When I require up to 256 bytes, responses are OK.
    Problem occurs when I expect e.g. 257B (Le = 0x000101), in this case I've got following error:
    send_APDU() returns 0x80100008 (The data buffer to receive returned data is too small for the returned data.
    Here is my script:
    mode_211
    establish_context
    enable_trace
    enable_timer
    card_connect
    select -AID 4269426F4170706C6574
    send_apdu_nostop -sc 0 -APDU 80070000000101
    card_disconnect
    release_context
    I note that when I run it via JCShell everything works fine.
    Can somebody help me to solve my problem? Any ideas?

    thank you for your hint.
    smartcardio API is very comfortable tool. now I'm able to return up to 8190B otherwise error in my new thread :)
    sun.security.smartcardio.PCSCException: Unknown error 0x1f
    thanks again

  • Clearing the data buffer from the input fields

    Hi,
    I am using an user exit CONFPP02 for the Tcode: co11n. I have written a program such that the confirmation numbers having the status CNF will not be allowed to be processed. The whole confirmation is terminated when the system checks the confirmation number and its status as CNF. If the status of the confirmation number is PCNF, the program allows the further processing of the Tcode Co11n.
    The problem starts when the user enters the PCNF status confirmation number and enters, the system stores the values in the various input fields. Now without exiting the initial confirmation screen, if the user replaces the Confirmation number of the PCNF status to the Confirmation number of the CNF status , the system issues a warning message:"  Confirmation no. or order/sequence/operation has been changed
    However, the input fields still contain default values from thepreceding confirmation". if the user says yes, the program written is bypassed , thus allowing the reconfirmation of the CNF confirmation number  into PCNF confirmation number .
    Can anybody suggest a suitable method to clear the data stored defultly in the input fields so that the program can be made to work.
    With regards,
    Avinash.S
    Mobile no:09996192456

    Hi Gilad,
    I never use Preview and did not use Preview at all before sending the document over to my most recent client either.
    I only opened Preview up this morning after I discovered that all of the form data had disappeared on his end! And the only reason I opened up Preview was because I already knew it looked fine in Acrobat so wanted so wanted to view the form in a different application.
    My client would not even have notified me about it had he not sent the signed form back to me and I saw there was no data there! I then called him and asked him about the missing data and he said that he thought I had simply sent over the form purposely with blank fields:(
    I have just emailed him to ask him what application he opened it up in. My understanding is that he is on Windows because ne mentioned to me his company was using Windows when we last spoke. Perhaps he has a personal Macbook where he opened it? I just don't know and can hopefully soon find out:)
    But THANK YOU for letting me know about that script! I appreciate it:) I have now downloaded and installed it and will just have to use it on ALL of my forms before sending them out:)

  • Problem with call to BAPI when the data contains spaces

    Hi everyone,
    I've a table in R3 that has 2 fields which is consulted via BAPI from XI. The Bapi call run correctly while the data don't contain spaces preffixed but when for example the data is ' A31' the BAPI call doesn't return nothing.
    The table structure is:
    CODE             DESCRIPTION
    values:
    ' A31'               'Desc A'
    'A30'                'Desc B'
    When I call the bapi with A30 value the Bapi return me Desc B, but when I try it with the value ' A31' the Bapi doesn't return any value.
    Could anyone help me?
    Thanks in advance

    >>The problem isn't the trim, because the bapi call must contain the spaces.
    Are you able to get expected results while testing the BAPI with data containing spaces?
    I have seen some cases where you get correct results when you test the RFC in SE 37, but the same data when passed from XI does not get the desired results. It was coz. when testing the RFC in R/3 some user exits are called and the data fets populated in the correct way. Check this.
    Regards,
    Jaishankar

  • How to restrict or stop the same data provided in selection screen parameters its should stop fetch the data on previously provided data?

    Hi Developer,
    i have issues that i need stop or restrict the same entries provided in the selection screen parameters it should no display that data but it should give an alert message by saying the data all ready viewed or displayed.
    example: organisation :getha pvt.td.
                  name :ramesh.
                  start date:10.2.2013.
    these are parameter which has been displayed by clicking execute ,if provide the same value to display again it should give waring message.
    Please guide me in solve the problem.
    thanks.
    ravi.

    Hi Somendra,
    Thanks for your response sir , i have provided the according to your provided information sir  but it was not  displaying the data first time also its giving message which i have provided ,my issues is if i provide data from time should display if i provide same data next time then only it should restrict the data and give a message.
    example:
    types:BEGIN OF str1,
       ROOMNO type zROOMNO,
       NAME TYPE zname3,
      BRANCH type zBRANCH,
       PHONENUMBER type zPHONENUMBER,
       END OF str1.
       data:it_str1 type TABLE OF str1,
            wa_str1 type str1.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME .
         skip.
    PARAMETERS:s_roomno type ZTABLE_2-roomno.
    skip.
    parameters:s_name type ztable_2-name.
    skip.
    PARAMETERS:s_branch type ztable_2-branch.
    skip.
    PARAMETERS:s_pho type ztable_2-phonenumber.
    SELECTION-SCREEN END OF BLOCK b1.
    AT SELECTION-SCREEN.
    SELECT  roomno
             name
             branch
             phonenumber from ztable_2 into TABLE it_str1
             WHERE roomno eq s_roomno and name eq s_name and branch eq s_branch and phonenumber eq s_pho.
       READ TABLE it_str1 INTO wa_str1 with KEY roomno = s_roomno name = s_name branch = s_branch phonenumber = s_pho.
       if sy-subrc eq 0.
         MESSAGE 'THE DATA IS ALL READY VIEWED' TYPE   'E'.
         RETURN.
         ENDIF.
         START-OF-SELECTION.
       SELECT  roomno
             name
             branch
             phonenumber from ztable_2 into TABLE it_str1
             WHERE roomno eq s_roomno and name eq s_name and branch eq s_branch and phonenumber eq s_pho.
         loop at it_str1 into wa_str1.
         WRITE:/1 wa_str1-roomno,
                10 wa_str1-name,
                30 wa_str1-branch,
               60 wa_str1-phonenumber.
         ENDLOOP.
    please guide me in solving the issue sir.
    thanks,
    Ravi

  • WAS 6.20: Why does WSDL generated from BAPI includes the data type BCD3.0?

    Hello,
    I'm trying to invoke a BAPI (specifically BAPI_REQUISITION_GETDETAIL) via WAS 6.20 however the WSDL that's returned from the Web Service Browser contains the following Schema:
    <xsd:element name="GR_PR_TIME" minOccurs="0" type="xsd:bcd3.0"/>
    The xsd namespace prefix is defined as follows:
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    .NET is complaining about this data type with the following parser error:
    Schema parsing error Type 'http://www.w3.org/2001/XMLSchema:bcd3.0' is not declared.
    and as far as I can tell binary coded decimal (bcd) isn't part of the Schema specification.
    Can anyone shed any insight as to why serialization is occurring this way and if there's anyway to correct or work around it?
    Thanks,
    Jay
    Where

    your noise margin increasing from 6 to 9 after you previously had it reset is a good indication there is a problem
    did you try thr quiet line test?
    are you connected directly to the master or test socket?   do you have other sockets apart from the master?
    you can try this post for other ideas 
    http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Parameters in the Data Model not working

    I have about a bunch of Data Models that all have about 20 datasets in them. I have coded them all to take a date parameter in the SQL. So each dataset has a parameter called
    <parameter name="reportingdate" dataType="date" defaultValue="2010-10-01"/>
    I now want to use the parameters that are available in the data model to finalize all of my data models. But no matter what type of variable I use I get the following error:
    java.io.IOException: execute query failed[nQSError: 17001] Oracle Error code: 1722, message: ORA-01722: invalid number
    at OCI call OCIStmtExecute: WITH
    What type of gotchas are there with this parameter stuff. I have tried setting it as both date and string. I have tried the following formats (YYYY-MM-DD) and (MM-DD-YYYY) and I have tried 2010-07-01T00:00:00.000-04:00

    Hi,
    Use Java Date format i.e dd/MM/yyyy.
    Thanks
    Prasan

  • The data in excel plat file is as fallows so prameters can i use

    i have the records in excel flatile as falloes so please guide me in gui_upload which parameters should be used if the data in platfile is as fallows means field separator like that allstuff
    VVS0025426000000241020071122ZA695434       000002942541.0000000001414 VW GOLFS ONLY              2007121200000000
    VR 0025508000000150520071214MSCUPZ251518   000000142099.00010000003RETURNED PARTS                2008010300000000
    VVS0025536000000209020071221ZA710548       000005740631.0000000003636 VW CARS-11 GOLFS & 25 POLOS2008011500000000
    V 0002557000000110520080118MOLU749265505 000000067325.00020000090EMPTY PALLETS                 2008012500000000
    V 0025501000000137520071214MSCUPZ251393   000001132200.00001803774EMPTY CLIPLOCKS               2008012500000000

    Hi,
    You have opened 5 posts on same topic just try to edit same thread.
    just search by providing gui_upload as search term
    Regards

  • What else are stored in the database buffer cache?

    What else are stored in the database buffer cache except the data blocks read from datafiles?

    That is a good idea.
    SQL> desc v$BH;
    Name                                                                                                      Null?    Type
    FILE#                                                                                                              NUMBER
    BLOCK#                                                                                                             NUMBER
    CLASS#                                                                                                             NUMBER
    STATUS                                                                                                             VARCHAR2(10)
    XNC                                                                                                                NUMBER
    FORCED_READS                                                                                                       NUMBER
    FORCED_WRITES                                                                                                      NUMBER
    LOCK_ELEMENT_ADDR                                                                                                  RAW(4)
    LOCK_ELEMENT_NAME                                                                                                  NUMBER
    LOCK_ELEMENT_CLASS                                                                                                 NUMBER
    DIRTY                                                                                                              VARCHAR2(1)
    TEMP                                                                                                               VARCHAR2(1)
    PING                                                                                                               VARCHAR2(1)
    STALE                                                                                                              VARCHAR2(1)
    DIRECT                                                                                                             VARCHAR2(1)
    NEW                                                                                                                CHAR(1)
    OBJD                                                                                                               NUMBER
    TS#                                                                                                                NUMBERTEMP      VARCHAR2(1)      Y - temporary block
    PING      VARCHAR2(1)      Y - block pinged
    STALE      VARCHAR2(1)      Y - block is stale
    DIRECT      VARCHAR2(1)      Y - direct block
    My question is what are temporary block and direct block?
    Is it true that some blocks in temp tablespace are stored in the data buffer?

  • Data Buffer Cache Error Message

    I'm using a load rule that builds a dimenson on the fly and getting the following error: "Not enough memory to allocate the Data Buffer Cache [adDatInitCacheParamsAborted]"I've got 4 other databases which are set up the same as this one and I'm not getting this error. I've checked all the settings and I think they're all the same.Anyone have any idea what this error could mean?I can be reached at [email protected]

    Hi,
    Same issue, running Vista too.  This problem is recent.  It may be due to the last itunes update.  itunes 11.2.23

  • Data Buffer error USER_AUTH_FAILED: User account for logonid "SYSTEM"

    All,  I have the following errors on both the Quality and the Production system in our data buffer job.
    com.sap.security.api.NoSuchUserException: USER_AUTH_FAILED: User account for logonid "SYSTEM" not found!
    These entries will not process because they are generating an error about the loginid for the Username SYSTEM is not found.
    So I am thinking that somehow the MII system is not capturing the correct username when they are being added into the Data Buffer Jobs, or there is something I am overlooking when I set up the databuffering.
    Other entries that were in the data buffer jobs were listed as using the RS1000SVC-QMUSBATCH, RS1630SVC-PMIIBATCH User accounts.  These are the accounts that our scheduled tasks run under.
    Those entries process OK out of the data buffer jobs.
    I did notice a similarity between the data buffer jobs in the quality and production systems as it pertains to the following transactions.
    Production MII ver 12.0.7 (Build 20)
    Muscatine%2FIntegration%2FSAP%2FPROD_CONFIRMED_INPUT_InsertQuery
    Which is called from the MIIC1043_IDOC Message Processing Rule.
    Muscatine%2FIntegration%2FSAP%2FHEADER_InsertQuery
    Which is called from the MIIC1043_Control_Recipe_Download Message Processing Rule.
    Quality MII 12.0.11 (Build 14)
    Muscatine%2FIntegration%2FSAP%2FPROD_CONFIRMED_INPUT_InsertQuery
    Which is called from the MIIC1043_IDOC Message Processing Rule.
    So the commonality is that these transactions are being initaiated by the Message processing rules.
    Are there known issues with data buffering from transactions initiated with Message Processing Rules?
    Is anyone sucessfully using data buffering of transactions called by message processing rules?
    Any help is appreciated.
    Bob

    Jeremy,  Thanks for your reply.
    There doesn't seem to be much detailed information on the use of Catagories with Processing rules in Help or in the forums.  So let me see if I understand your suggestion correctly.
    On the MII server create a processing rule for the message using a category instead of using a transaction,  The message received by the message listener will be placed in a buffer.  I am assuming these messages whould show up in the message monitor and not in the  Data Buffer jobs/entries.
    So in my transaction which normally processes this data I could add logic to access the message data; using the Message Service (Query, Read, Update and Delete) action blocks.  I could pare down the selection by selecting messages based on the MessageCategory that I defined in the message processing rule.   This will allow me to access the stored message data.
    Finally use a scheduled Job to execute the transaction.  The scheduled job would be run with a valid userID and Password so if it connection to the external database failed the enteries would be placed in the data buffer jobs with a valid userID credentials.
    Does this sound like what you had in mind?

  • Data Package 000001 : sent, not arrived. No data load in BW 7

    Hi gurus...i am working with BW 7 and i have already had the complete data flow from SRM to BW, some Business Content extractors and somo others generic extractors. We have created transformations, info packages and DTP's, in fact we have loaded master data and transactional data but since last monday data load is not working any more, now every time we manually run the infopackage the next waring message appears:
    Data Package 000001 : sent, not arrived
    and the data load just wait for an answer of SRM (with is the source system) or SRM waits a request from BW.
    We have reactivated the extractors in the SBIW, replicated and reactivated in BW (also we reactivate the transformations) and the data load is not working. Then we also regenerate the Data source but it does not work.
    Do you have and idea of what is happening or which could be the problem.
    Thanks

    Check in transaction SMQA in the source system. The communication might not be working. If there are any entries in RED, then select execute LUWs from the menu to manually process them.
    Read the error and try to resolve it before though.

Maybe you are looking for