Parameters will it work like Select-Option is there any chance

Hi Every One
I am using Parameters to do selection .but in one case i need to get  some data for the whole month .i have the values in 2 different variables .(If we use select-option then we can use sign,option,low,high .).but how to do here . Any idea is please do let me know.
Sravya

Hi,
<li>Define range table.
   DATA:r_data TYPE RANGE OF datum,
        w_data LIKE LINE OF r_data.
<li>Build range table
   w_data-low  = parameter1.
   w_data-high = parameter2.
   w_data-sign  = 'I'.
   w_data-option  = 'BT'.
   APPEND w_data TO r_data.
   CLEAR  w_data.
<li>Use that in SELECT statement.
SELECT * FROM <db_tab> INTO TABLE <it_tab> WHERE <date_field> IN r_data.
Thanks
venkat.O

Similar Messages

  • HT204387 Is there any chance that I can swap my ipad2 to ipad air?then how much will it cost?

    Is there any chance that I can swap my ipad2 to ipad air? How much will it cost?

    Denec wrote:
    Is there any chance that I can swap my ipad2 to ipad air?
    No.
    How much will it cost?
    Full price.
    You can "recycle" it thru Apple and get an Apple store gift card you can use towards a new iPad.
    See this -> http://store.apple.com/us/browse/reuse_and_recycle

  • How to declare and work with select-option in screen painter?

    hello there,
    can anybody plz suggest me ,how to declare and work with select-option in screen painter?
    neon

    Hi Blue,
    Please check these threads which will help you a lot..
    module pool programming " to add selection-option on screen"
    Re: Select option in Dialog program screen
    Re: SELECT-OPTIONS in Screen
    Good luck
    Narin

  • HOW TO DESIGN RANGE SELECTION IN MODULE PULL LIKE SELECT-OPTION.

    HOW TO DESIGN RANGE SELECTION IN MODULE PULL LIKE SELECT-OPTION.
    how can we add range selection in screen painter.
    regards.

    Hi,
       create two input fields and a push button like select option in the screeen.
    Try checking this logic
    <b>Program:</b>
    <b>ranges</b> ra_matnr for mara-matnr.
    <b>Layout field name declaration:</b>
    Give the low field name as ra_range-low
      and high field name as ra_range-high.
    extension for pushbutton.--exten(function code)
    next -- function code for the enter key.
    PBO
    module status_3000.
    PAI
    module user_command_3000.
    <b>module user_command_3000.</b>
    if sy-ucomm = exten.
      call screen 400. (screen which shows extension values can be kept).
    elseif sy-ucomm = Next.
    if ra_matnr-low is not initial.
        ra_matnr-SIGN = 'I'.
        ra_matnr-OPTION = 'EQ'.
        APPEND ra_matnr.
        clear ra_matnr.
    endif.
    if ra_matnr-high is not initial.
        ra_matnr-SIGN = 'I'.
        ra_matnr-OPTION = 'EQ'.
        APPEND ra_matnr.
        clear ra_matnr.
    endif.
    endif.
    endmodule.
    module status_3000.
    read table ra_matnr  index 1 into ra_matnr .
    set pf-status '3000'.
    set title '3000'.
    endmodule
    Br,
    Laxmi.

  • Is possible in a dialog screen attach a field functional like select-option

    hi,
       Is it possible - in a dialog screen - to attach a field that has functionality like Select-options fields?
    And if so - how?
    and information about complex_selections_dialog

    Hi,
    Look at the below links
    module pool programming " to add selection-option on screen"
    module pool programming " to add selection-option on screen"
    Regards
    Sudheer

  • Working with select option in WD4A

    can any one provide me some document or video file to work with select options in webdynro for abap?

    Hi,
    Find the following URLs
    PDF - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/21706b4b-0901-0010-7d93-c93b6394bc1d
    Video Clip - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/1a3c52e7-0b01-0010-ed81-f31d4868c5d6
    Login to SDN to play the video clip.
    Reward accordingly.
    Regards
    ChandraK

  • Is there any chance that Tab Grouping feature (like the one in Opera 11) will become native for Firefox? Could be very helpful.

    Is there any chance that Tab Grouping feature (similar to Opera 11) will appear in Firefox? Could be very helpful and convenient.

    Hi ThaPlaya,
    I feel your pain. I am in charge of over 250 PCs and laptops. Flash Player stopped working for me after an update. I have been working on this issue non-stop since the middle of October, 2012. It's time-consuming, and even after applying the latest Flash update, it still doesn't work properly.
    I am beyond frustrated! I have people calling me left and right saying that they can't access content. I have been using this site https://www.mozilla.org/en-US/plugincheck/ to try and do a browser plug-in check while in IE an dFirefox. Even after I update all plug-ins, Flash still works about half the time.
    For instance, the principal of the middle and high school wanted to view an online magazine http://upfront.scholastic.com/issues/12_10_12, about 3 pages load on this site. The rest continue to say LOADING. When I right-click on a page and then left-click on ABOUT ADOBE 11.5.502.110, it seems I am using the most up-to-date version for IE and Firefox.
    Students are trying to access sumdog.com and stmath.com, both run using Flash. STMath is now working a bit better because I allowed some exceptions in our internet content filtering appliance, and in our firewall, sumdog still works half the time.
    If Adobe is going to update their browser plug-ins, they need to test and retest before giving the public access. This situation is causing me a ton of problems!
    Sorry to infiltrate your post...
    Dawn/Flower1964

  • Hi, I am worried about the old Iphones, couldn't we change them for another version? I have my Iphone 3, love it, but now I am feeling out of the picture. The phone works perfect...Is there any plan to do so? like recycling?

    I am worried about the old Iphones, couldn't we change them for another version? I have my Iphone 3, love it, but now I am feeling out of the picture. The phone works perfect...Is there any plan to do so? like recycling?

    You can purchase any model (currently sold) iPhone that you desire.
    What's the big deal or so complicated about figuring that out?

  • I've made a very short movie and would like it to play over and over on my iTouch 4 until I'm done but there is no loop or repeat option Is there any way to do this?

    I've made a very short movie and would like it to play over and over on my iTouch 4 until I'm done but there is no loop or repeat option Is there any way to do this?

    Maybe here:
    http://scottlinkblog.wordpress.com/2010/03/23/looping-video-on-an-ipodiphone/
    Try Googling for more solutions.

  • Hello  I upgraed my iphone to ios 7 but its dosent work like app stor dosent install any brogram or update programs and its slow and stuck plz help me

    Hello
    I upgraed my iphone to ios 7 but its dosent work like app stor dosent install any brogram or update programs and its slow and stuck plz help me

    My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
    I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the  iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
    The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
    Once I completed both restores, the sync with iTunes worked fine.

  • I've lost my SB Audigy installation CD. Is there any chance to have a microphone worki

    Yeah, I've lost my SB Audigy installation CD, and after a recent format I can't install AudioHQ, Creative Recorder, PlayCenter and all that software - I just have the drivers, which I downloaded from the internet. Is there any chance to have my microphone working again? Becasue ATM it does not work, I bet I need some software from the insallation CD to get it to work, but I no longer have that CD! Can I download what I need from the internet? Can I somehow get another insallation CD? Finally, will it work if I plug my microphone into my motherboard's integrated soundcard, and my headphones into SB Audigy? Help me... I'm gonna have an important UT2004 scrimmage soon, and without a mic I'm useless there!

    Owoc wrote:
    Solved the problem The mic was muted in the audio mixer thx for your help guys
    LOL :smileyvery-happy: I bet Shingo must be pulling his hair now.

  • If i just preordered my IPhone 5 today (9/17), is there any chance i can recieve it before Oct 10th-Oct 15th, like it says on my order status?

    If i just preordered my IPhone 5 today (9/17), is there any chance i can recieve it before Oct 10th-Oct 15th, like it says on my order status?. I am really hoping that somehow, i will get my iphone earlier than the email suggested.

    Ah dangit, well i guess its 3 weeks of trying to distract myself then

  • If the occi can work with TUXEDO well ,is there any restricts?

    we want to use occi to access oracle in TUXEDO serive.
    If the occi can work with TUXEDO well ,is there any restricts?
    who can describe how to use , step by step.
    THS a lot !
    mails:[email protected]

    Hi,
    Yes OCCI can be used to access Oracle database from Tuxedo. If you want Tuxedo to manage transactions for you then you need to follow essentially the same approach as in using OCI or Embedded SQL. Since you are accessing a resource manager, you will need to define an OPENINFO string in the Tuxedo RM file located in the udataobj directory of the Tuxedo installation. Likewise you will need to build an RM specific TMS for the Oracle Database and specify the name of the RM entry in the buildtms and buildserver commands with the -r switch.
    Before going into a step by step set of instructions, can you describe what you know about Tuxedo and OCCI? Have you built Tuxedo servers before and have they accessed a resource manager?
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • I wanted to know how does technical support work via icloud and is there any new technology out that helps providing technical support

    i wanted to know how does technical support work via icloud and is there any new technology out that helps providing technical support?

    basically I’m doing a project were I wanted to find out if there are recent technology  out that provides technical support for example they do it with remote access but is they any new ways that  they can support us and just wanted to find out if icloud gives technical support then how?

  • Hi, i would like to know is there any app that can let me see and edit microsoft  excel

    hi, i would like to know is there any app that can let me see and edit microsoft  excel

    Look at Documents to Go Premium Suite in the App Store. That app should be able to edit excel files.
    http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8

Maybe you are looking for

  • Payment Notice not print if Clearing Doc post another outstanding item and

    hi Guru,   anyone know any solution in   Payment Notice not print while Clearing Doc(payment) clear against a invoice   but the clearing doc is a partial payment only, thus using same clearing doc to post a outstanding line item   and we use another

  • I was wondering if someone could help me

    hello i was wondering if someone could help me. i dont know if this is the right forum so im sorry if its not! my family computer recently got a virus and was gone for good. we got a new computer and i redownloaded itunes. i thought that all the musi

  • Help me with an interference issue?

    Here is my network: Motorola modem -> Airport Extreme (with external HD) -> 2 MacBooks, 2 iPhones, AppleTV, Sony Bluray. I live in a suburban neighborhood with few homes near-by, with only three other wifi networks showing up besides my own. My modem

  • Error message: unknown Error occured (-39)

    Hello anybody, does anybody has an idea why I am not able to syncronize my iPhone with iTunes? The error message tells me, that the iPhone couldn't synchronize with iTunes. A unknown error occured (-39). What can I do to solve the problem? Kind regar

  • Blackmagic Decklink & FCE

    I just bought a new Mac Pro and a Blackmagic Decklink SP PCI-Express card. I'm trying to get video from a DVCPro Player into FCE HD 3.5. FCE does not allow me to chose the decklink card though, only Firewire devices. Is there anyway to do this. So fa