Paravertualization failed to reboot after installation

Hi All,
Please help on paravirtualization with oracle el5.
the installation completed suceesfully and it asked for a reboot. But the reboot always failed with error below.
"2008-01-08 16:21:02" INFO=> select_tgt_host: vm('/OVS/running_pool/10_vmoralx1') will run on srv('10.10.8.58')
"2008-01-08 16:21:02" DEBUG=> start_vm: vm('/OVS/running_pool/10_vmoralx1') on srv('10.10.8.58') ...
"2008-01-08 16:21:02" INFO=> xen_correct_cfg: success. vm('/OVS/running_pool/10_vmoralx1') => cfg_file('/OVS/running_pool/10_vmoralx1/vm.cfg')
"2008-01-08 16:21:04" ERROR=> xen_start_vm:error! vm('/OVS/running_pool/10_vmoralx1')=><Exception: xm create '/OVS/running_pool/10_vmoralx1/vm.cfg'=>Error: (2, 'Invalid kernel', 'xc_dom_parse_elf_kernel: ELF image has no shstrtab\n')
>
"2008-01-08 16:21:04" INFO=> start_vm: vm('/OVS/running_pool/10_vmoralx1') on srv('10.10.8.58') => failed:<Exception: xm create '/OVS/running_pool/10_vmoralx1/vm.cfg'=>Error: (2, 'Invalid kernel', 'xc_dom_parse_elf_kernel: ELF image has no shstrtab\n')
>
the file vm.cfg is very short compare to a paravirtualizion
here is the vm.cfg
bootloader = '/usr/bin/pygrub'
disk = ['file:/OVS/running_pool/10_vmoralx1/System.img,xvda,w',
',hdc:cdrom,r',
memory = '500'
name = '10_vmoralx1'
on_crash = 'restart'
on_reboot = 'restart'
vcpus = 1
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0,vncpasswd=fortune1']
vif = ['mac=00:16:3E:6E:E6:20, bridge=xenbr0']
Thanks in advance!
Tom

Thanks-Changhai for your help.
i did modify the vm.cfg file as you recommended. But after i start the OS and it failed again, double check the vm.cfg and it went back to this line again.
disk = ['file:/OVS/running_pool/10_vmoralx1/System.img,xvda,w',
',hdc:cdrom,r',
I think the format for disk section is not right. please try again after change the line from:
disk = ['file:/OVS/running_pool/10_vmoralx1/System.img,xvda,w',
',hdc:cdrom,r',
to:
disk = [ 'file:/OVS/running_pool/10_vmoralx1/System.img,xvda,w' ]
Please advice!
Thanks-Tom

Similar Messages

Client boots into WinPE but then it will fail and reboot after the step: "Preparing network connections"

I have a new issue with all DPs.
When I pxe boot, it will boot into WinPE but then it will fail and reboot after the step: “Preparing network connections”
I have tried reinstalling the DP and MP. Also redistributing the boot image.
When I press F8 to go into debug mode, ipconfig show me an IP address and I am able to ping my Management point, my DHCP server and also my Distribution point.
I have attached the smsts.log file.
<![LOG[LOGGING: Finalize process ID set to 900]LOG]!><time="10:43:28.925+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="tslogging.cpp:1495">
<![LOG[==============================[ TSBootShell.exe ]==============================]LOG]!><time="10:43:28.925+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904"
file="bootshell.cpp:1055">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL']LOG]!><time="10:43:28.925+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="util.cpp:964">
<![LOG[Debug shell is enabled]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:1066">
<![LOG[Waiting for PNP initialization...]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:60">
<![LOG[RAM Disk Boot Path: NET(0)\SMSIMAGES\EVN0002F\BOOT.EVN0002F.WIM]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="configpath.cpp:302">
<![LOG[Booted from network (PXE)]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="configpath.cpp:317">
<![LOG[Network(PXE) path: X:\sms\data\]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="configpath.cpp:319">
<![LOG[Found config path X:\sms\data\]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:548">
<![LOG[Booting from removable media, not restoring bootloaders on hard drive]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:582">
<![LOG[X:\sms\data\WinPE does not exist.]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:599">
<![LOG[X:\_SmsTsWinPE\WinPE does not exist.]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:613">
<![LOG[Executing command line: wpeinit.exe -winpe]LOG]!><time="10:43:28.956+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="10:44:13.294+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:942">
<![LOG[Starting DNS client service.]LOG]!><time="10:44:13.294+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:666">
<![LOG[Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="10:44:13.809+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908"
file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="10:44:13.809+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:942">
<![LOG[==============================[ TSMBootStrap.exe ]==============================]LOG]!><time="10:44:13.903+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116"
file="tsmbootstrap.cpp:1165">
<![LOG[Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="10:44:13.903+480" date="08-13-2014" component="TSMBootstrap" context="" type="0" thread="1116"
file="tsmbootstrap.cpp:1166">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL']LOG]!><time="10:44:13.919+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="util.cpp:964">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL']LOG]!><time="10:44:13.919+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="resourceutils.cpp:169">
<![LOG[Current OS version is 6.2.9200.0]LOG]!><time="10:44:13.919+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="util.cpp:3094">
<![LOG[Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="0" thread="1116"
file="tsmbootstrap.cpp:963">
<![LOG[PXE Boot with Root = X:\]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="tsmbootstrap.cpp:1062">
<![LOG[Executing from PXE in WinPE]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="tsmbootstrap.cpp:1077">
<![LOG[Loading TsPxe.dll from X:\sms\bin\x64\TsPxe.dll]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="0" thread="1116" file="tsmbootstraputil.cpp:1363">
<![LOG[TsPxe.dll loaded]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsmbootstraputil.cpp:1373">
<![LOG[Device has PXE booted]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tspxe.cpp:122">
<![LOG[Variable Path: \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116"
file="tspxe.cpp:134">
<![LOG[Variable Key Len: 69]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tspxe.cpp:141">
<![LOG[Succesfully added firewall rule for Tftp]LOG]!><time="10:44:13.950+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="fwopen.cpp:123">
<![LOG[Executing: X:\sms\bin\x64\smstftp.exe -i 10.9.12.122 get \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var X:\sms\data\variables.dat]LOG]!><time="10:44:13.950+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="tspxe.cpp:177">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="10:44:14.028+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="commandline.cpp:228">
<![LOG[Set command line: "X:\sms\bin\x64\smstftp.exe" -i 10.9.12.122 get \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var X:\sms\data\variables.dat]LOG]!><time="10:44:14.028+480" date="08-13-2014"
component="TSPxe" context="" type="0" thread="1116" file="commandline.cpp:731">
<![LOG[Executing command line: "X:\sms\bin\x64\smstftp.exe" -i 10.9.12.122 get \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var X:\sms\data\variables.dat]LOG]!><time="10:44:14.028+480" date="08-13-2014"
component="TSPxe" context="" type="1" thread="1116" file="commandline.cpp:827">
<![LOG[Process completed with exit code 0]LOG]!><time="10:44:14.106+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="commandline.cpp:1123">
<![LOG[Succesfully removed firewall rule for Tftp]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="fwopen.cpp:146">
<![LOG[Successfully downloaded pxe variable file.]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tspxe.cpp:187">
<![LOG[we are booted using PXE]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:2673">
<![LOG[we are booted using PXE and we use a generated password]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:2678">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[CryptDecrypt (hKey, 0, 1, 0, pData, &dwDecryptedLen), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\smscrypt\windes.cpp,165)]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="windes.cpp:165">
<![LOG[SMS::Crypto::DES::DecryptBuffer( (BYTE*)pszPassword, (DWORD)(wcslen(pszPassword)*sizeof(WCHAR)), encryptedBuffer.getBuffer(), (DWORD)encryptedBuffer.size(), pbDecryptedBuffer, dwDecryptedBufferSize ), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\tscore\tsremovablemedia.cpp,387)]LOG]!><time="10:44:14.122+480"
date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsremovablemedia.cpp:387">
<![LOG[Verifying media password.]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:271">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[Found network adapter "Intel(R) 82577LM Gigabit Network Connection" with IP Address 10.9.2.50.]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="0"
thread="1116" file="tsmbootstraputil.cpp:517">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[CryptDecrypt (hKey, 0, 1, 0, pData, &dwDecryptedLen), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\smscrypt\windes.cpp,165)]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="windes.cpp:165">
<![LOG[SMS::Crypto::DES::DecryptBuffer( (BYTE*)pszPassword, (DWORD)(wcslen(pszPassword)*sizeof(WCHAR)), encryptedBuffer.getBuffer(), (DWORD)encryptedBuffer.size(), pbDecryptedBuffer, dwDecryptedBufferSize ), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\tscore\tsremovablemedia.cpp,387)]LOG]!><time="10:44:14.153+480"
date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsremovablemedia.cpp:387">
<![LOG[Entering TSMediaWizardControl::GetPolicy.]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsmediawizardcontrol.cpp:527">
<![LOG[Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00']LOG]!><time="10:44:14.153+480"
date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="environmentscope.cpp:263">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116"
file="environmentscope.cpp:623">
<![LOG[Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00']LOG]!><time="10:44:14.153+480"
date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="environmentscope.cpp:263">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116"
file="environmentscope.cpp:623">
<![LOG[Setting LogMaxSize to 1000000]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:555">
<![LOG[Setting LogMaxHistory to 1]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:556">
<![LOG[Setting LogLevel to 0]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:557">
<![LOG[Setting LogEnabled to 1]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:558">
<![LOG[Setting LogDebug to 1]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:559">
<![LOG[UEFI: false]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:569">
<![LOG[Loading variables from the Task Sequencing Removable Media.]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:584">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL']LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="util.cpp:964">
<![LOG[Setting SMSTSMP TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSMediaGuid TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSBootMediaPackageID TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSHTTPPort TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSHTTPSPort TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSIISSSLState TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSLaunchMode TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSMediaPFX TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSPublicRootKey TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSSiteCode TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSSiteSigningCertificate TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSUseFirstCert TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSx64UnknownMachineGUID TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSx86UnknownMachineGUID TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Root CA Public Certs=]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:615">
<![LOG[Missing root CA environment variable from variables file]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:621">
<![LOG[Support Unknown Machines: 0]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:632">
<![LOG[Custom hook from X:\\TSConfig.INI is ]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:675">
<![LOG[No hook is found to be executed before downloading policy]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:699">
<![LOG[Authenticator from the environment is empty.]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:838">
<![LOG[Need to create Authenticator Info using PFX]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:850">
<![LOG[Initialized CStringStream object with string: 6b7b5b1a-8a29-40a1-af6b-008746965168;2014-08-13T18:44:14Z.]LOG]!><time="10:44:14.200+480" date="08-13-2014" component="TSPxe" context="" type="0"
thread="1116" file="stringstream.cpp:101">
<![LOG[Set media certificate in transport]LOG]!><time="10:44:14.216+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="libsmsmessaging.cpp:9401">
<![LOG[Set authenticator in transport]LOG]!><time="10:44:14.216+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="libsmsmessaging.cpp:7734">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: SS01.adskevents.local:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA]LOG]!><time="10:44:14.216+480" date="08-13-2014" component="TSPxe" context="" type="1"
thread="1116" file="libsmsmessaging.cpp:8604">
<![LOG[Executing command line: X:\WINDOWS\system32\cmd.exe /k]LOG]!><time="10:44:15.939+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="10:44:15.939+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:942">
<![LOG[Successfully launched command shell.]LOG]!><time="10:44:15.939+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:432">
<![LOG[Error. Received 0x80072ee2 from WinHttpSendRequest.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="libsmsmessaging.cpp:8870">
<![LOG[hr, HRESULT=80072ee2 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8919)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116"
file="libsmsmessaging.cpp:8919">
<![LOG[sending with winhttp failed; 80072ee2]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="3" thread="1116" file="libsmsmessaging.cpp:8919">
<![LOG[m_pHttpTransport->Send (0, 0, pServerReply, nReplySize), HRESULT=80072ee2 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,5159)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="libsmsmessaging.cpp:5159">
<![LOG[MPKeyInformation.RequestMPKeyInformationForMedia(szTrustedRootKey), HRESULT=80072ee2 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,9410)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="libsmsmessaging.cpp:9410">
<![LOG[Failed to get information for MP: http://SS01.adskevents.local. 80072ee2.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="3" thread="1116" file="tsmbootstraputil.cpp:1518">
<![LOG[sMP.length() > 0, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1526)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmbootstraputil.cpp:1526">
<![LOG[TSMBootstrapUtil::SelectMP ( sSMSTSMP.c_str(), sMediaPfx.c_str(), sMediaGuid.c_str(), sAuthenticator.c_str(), sEnterpriseCert.c_str(), sServerCerts.c_str(), nHttpPort, nHttpsPort, bUseCRL, sSiteCode, sAssignedSiteCode, sMP, sCertificates, sX86UnknownMachineGUID,
sX64UnknownMachineGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,907)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmediawizardcontrol.cpp:907">
<![LOG[Exiting TSMediaWizardControl::GetPolicy.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsmediawizardcontrol.cpp:1419">
<![LOG[GetPolicy(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2492)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmediawizardcontrol.cpp:2492">
<![LOG[RunWizardForPXE(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2834)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmediawizardcontrol.cpp:2834">
<![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="tsmbootstrap.cpp:1078">
<![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1226)]LOG]!><time="10:44:35.281+480" date="08-13-2014"
component="TSPxe" context="" type="0" thread="1116" file="tsmbootstrap.cpp:1226">
<![LOG[Exiting with return code 0x80004005]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmbootstrap.cpp:1238">
<![LOG[Execution complete.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:693">
<![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="0"
thread="908" file="environmentscope.cpp:493">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="0"
thread="908" file="environmentlib.cpp:335">
<![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="0"
thread="908" file="environmentlib.cpp:553">
<![LOG[::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,809)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell"
context="" type="0" thread="908" file="utils.cpp:809">
<![LOG[RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="2" thread="908"
file="utils.cpp:809">
<![LOG[GetTsRegValue() is unsuccessful. 0x80070002.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="2" thread="908" file="utils.cpp:842">
<![LOG[End program: ]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:725">
<![LOG[Finalizing logging from process 900]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="tslogging.cpp:1741">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="tslogging.cpp:1583">
<![LOG[Successfully finalized logs to C:\SMSTSLog]LOG]!><time="10:44:35.687+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="tslogging.cpp:1640">
<![LOG[Cleaning up task sequencing logging configuration.]LOG]!><time="10:44:35.687+480" date="08-13-2014" component="TSBootShell" context="" type="0" thread="908" file="tslogging.cpp:584">

Every time a query is sent to the MP, it receives 0x80072ee2 which translates to "The operation timed out". This has nothing to do with your MP or DP though so reinstalling them won't make any difference.
This error is indicative of network issues -- basically, the "client" is not getting a response back in a timely manner (and probably not at all). Assuming the MP is healthy though, then only other piece of the puzzle is the network.
You can try setting the SMSTSAssignmentsDownloadRetry and SMSTSAssignmentsDownloadInterval task sequence variables in the boot image to increase the client's tolerance for latency or other weirdness in the network. This has worked for many.
If that doesn't work, you'll have to break out a sniffer and watch the traffic to see what's going on at a network level.
Jason | http://blog.configmgrftw.com

Arch fails to boot after installation (BIOS mode)

I finished my Arch installation, following the Beginner's Guide, and once I unmounted the partitions and rebooted, GRUB failed to boot into Arch. I'm not exactly sure what the problem is though. Basically what happens is I power on the machine, the Dell splash screen comes up, GRUB loads, I choose
Arch Linux, with Linux core repo kernel
the kernel and ramdisk attempt to load, then some message about "recovering journal" appears, and then I return back to the Dell splash screen. The same thing happens even if I choose the second option
Arch Linux, with Linux core repo kernel (Fallback initramfs)
However, when I choose to boot Win XP everything boots just fine. My apologies for the quality of the videos and pictures.
Here's a video of what happens:
http://youtu.be/uC96kX6iTjI
I suspect this has to do with this error I got when I generated the "grub.cfg". Although I'm not entirely sure because my understanding is that this error would affect booting Win XP which in fact boots perfectly fine.
Error (and no I'm not using any lvm volumes)
http://imgur.com/qqxpoGG
I believe these are the portions of the "grub.cfg" that load Arch and Win XP. I got these by pressing "e" while on their menu entry in the GRUB bootloader.
Arch (I had to scroll down to see the rest, hence two pictures)
http://imgur.com/79dBw2C
http://imgur.com/qusEfL0
Win XP
http://imgur.com/oLnLlT0
Any idea how I can fix this? Any help is greatly appreciated and please be patient, I know, I'm a noob.
* I'm not sure if this is of any significance but I had a problem very similar to this when trying to get the Arch install to boot via usb (this computer doesn't have CD/DVD drive). I solved it by following this excerpt from the Beginner's Guide.
Troubleshooting boot problems
If you are using an Intel video chipset and the screen goes blank during the boot process, the problem is likely an issue with Kernel Mode Setting. A possible workaround may be achieved by rebooting and pressing
e
over the entry that you are trying to boot (i686 or x86_64). At the end of the string type
nomodeset
and press
Enter
Here's a video of what it looked like:
http://youtu.be/vXRcbU0zdto
The computer specs:
OS: Windows XP Professional 32 bit Version 2002 Service Pack 3
CPU: Intel Pentium 4 @ 3.00 GHz
RAM: 2 GB DDR2
HDD: 80 GB

Hi,
why did you not try adding nomodeset with the regular boot? During the net-install no video drivers will be installed;
you have to install them after reboot after installing xorg. The (video)problem you had with booting from usb is still
present.

Solaris 10u6 fails to boot after installation on HP Proliant DL380 G4

Hello,
I have used Solaris 10u5 without issues on the HP DL380 G4. However, when I tried to install update 6 (new installation), it fails to reboot. I starts to boot, then aborts and reboots the system. I added the arguments -av to help get more information. Here's what I was able to capture:
Enter default directory for modules [platform/i86pc/kernel /kernel /usr/kernel]:
module /platform/i86pc/kernel/amd64/unix: text at [0xfffffffffb800000, 0xfffffffffb8d5f0f] data at 0xfffffffffbc00000
module misc/amd64/krtld: text at [0xfffffffffb8d5f10, 0xfffffffffb90a89f] data at 0xfffffffffbc74ce0
module /kernel/amd64/genunix: text at [0xfffffffffb90a8a0, 0xfffffffffbb04f4f] data at 0xfffffffffbc7ee00
Name of system file [etc/system]:
SunOS Release 5.10 Version Generic_137138-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
features: 14dffdf<cpuid,mwait,cx16,sse3,asysc,htt,sse2,sse,sep,pat,cx8,pae,mca,mmx,cmov,pge,mtrr,msr,tsc,lgpg>
mem = 6225476K (0x17bf91000)
root nexus = i86pc
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
isa0 at root
psuedo-device ppm0
ppm0 is /pseudo/ppm@0
npe0 at root: space 0 offset 0
npe0 is /pci@0,0
pcie_pci0 is /pci@0,0/pci8086,3595@2
PCIE-device: pci8086,32a@0,2, pcie_pci3
pcie_pcie3 is /pci@0,0/pci8086,3595@2/pci8086,32a@0,2
NOTICE:
* This device is not bootable! *
* It is either offlined or detached or faulted. *
* Please try to boot from a different device. *
NOTICE:
spa_import_rootpool: error 22
panic[cpu0]/thread=fffffffffbc26ba0: cannot mount root path /pci@0,0/pci8086,3595@2/pci8086,32a@0/pcie11,4091@3/sd@0,0:a /pci@0,0/pci8086
,3595@2/pci8086,32a@0,2/pcie11,4091@3/sd@1,0:a
fffffffffbc49320 genunix:rootconf+114 ()
fffffffffbc49350 genunix:vfs_mountroot+61 ()
I have tried this on two identical machines with the same results. Some other details:
- Booting into failsafe mode works; the system finds and mounts the zfs volumes
- I did a network installation. I rebuilt the miniroot to include the CPQary3 package
- I tried installing with a zpool with two disks as well as only one disk; the result was the same
- I also tried installing without using a ZFS root disk; it also fails
I have googled for this problem but have not found anything like it. I would greatly appreciate any help!
Thanks,
Michael

I finally figured it out. For some reason, the installer does not install the driver package (CPQary3) or include it in the boot archive. The driver is in the fail-safe miniroot, however. So, I booted into fail-safe mode and installed the driver, and now everything works!
I ran into two problems with the installer on this hardware. I'll post details and work-arounds for both in a separate message.

Multiple Oracle Homes - Oracle Listener failes to start after installation

Just in case the listener fails to start after an oracle installation, please check the oracle ports in the listener.ora and tnsnames.ora, both of which are present in the following directory:
...\oracle\<SID>\<Ver>\NETWORK\ADMIN
All installations should have separate listener ports eg. If the first installation has port 1527, the next one should be 1528 and so on..
If they do not, manually change the ports and start the listeners.
Also check SAP Note 98252. Although I didn't find it necessary (I think it applies only if you have a single listener for all oracle homes), it did give me an idea that there some config problem in the .ora files.
Also see [this thread|Oracle Listener error in Import ABAP phase?; for related details

hi
thanks for the help ,
I have been using the SQL Server , i am totally blank about Oracle
i am totally confused with this user, and hoststring
i logged in to the enterprise manager using System and manager password
But i cannot connect to any database using SQL Server
i am not remembering any user name or password i have given during installation.
the only thing i remember is
Global databasename = (globedb) i have given
For SID = globedb the same name i have given
for sys ,i have given sysdb as password
and for system i have given systemdb as password
with this can i do anything
when expand the schemas ,i can see the XDB,SCOTT and SYS . how can i login to this .
if i want to login to the scott
what would be the username,password,and hoststring. since i haven't set any password and username ,there would be some default username ,password, and hoststring.
if any one can help me please help me
thanks regards

Flash Builder failed to lunch after installation.

Adobe Flash Builder can't lunch after installation completed successfully. it says to uninstall and reinstall again. if problem continues, contact adobe support. and it says: "error: 5"
~ Then after I uninstalled it. Download it again and reinstall again, same result. I did this numerous times now and no tech solutions so far!
What is going on here and how to fix this?

don't worry, it works now, after i rebooted the machine.

Solaris 10 x86 failed to reboot after initial installation due to display error

Hi everyone,
i just finished installing solaris 10 x86 on my computer, and the installation process went smoothly. However, when the system tried to reboot, i got some error related to the display of the monitor, which caused no desktop login can be displayed and no access to the console. I had no way to proceed with the any other operations. The error read as:
" Out of range<br />
Hf 30KHz - 70KHz<br />
Vf 30Hz - 160 Hz<br />
Current frequency<br />
Hf 90.3KHz "
I tried to boot to solaris failsafe mode and run "kdmconfig"
command to reconfigure video and monitor, but it did not work, since kdmconfig is not supported under that mode.
Because i have no way to login, the currently available solution seems not working with my situation. Dose anyone have idea or suggestion to figure it out, without reinstalling the OS from the very beginning?
Very appreciate your time and help.

Solution found:
First tried to login using "console login" when solaris booted up, before the desktop login window appeared. Then, run command "kdmconfig", changed the video device to X86 VESA compatible device, which is from the x86 driver and porting kit for solaris, then test/save and exit. After that, reboot the system. Now it is working, not perfect though (due to my old monitor) :)-

Failed reboot after installation

I have just recently installed a Java update, and my computer will not restart after it restarted when the installation was complete. It just defaults to the screen where it gives you the option to go into safe mode. None of the other options work that are there. Any help would be gladly appreciated.
Thanks

Thanks-Changhai for your help.
i did modify the vm.cfg file as you recommended. But after i start the OS and it failed again, double check the vm.cfg and it went back to this line again.
disk = ['file:/OVS/running_pool/10_vmoralx1/System.img,xvda,w',
',hdc:cdrom,r',
I think the format for disk section is not right. please try again after change the line from:
disk = ['file:/OVS/running_pool/10_vmoralx1/System.img,xvda,w',
',hdc:cdrom,r',
to:
disk = [ 'file:/OVS/running_pool/10_vmoralx1/System.img,xvda,w' ]
Please advice!
Thanks-Tom

Windows failed to reboot after installing PC Suite

Hi everyone,
I hope you can help me with my problem. I have an old pc suite version installed in my old laptop(about 6 years old - OS Windows Vista Home Basic) but today i decided to upgrade to the latest one(i think it's version 7). I was able to successfully install it. when i launched the application, it worked fine but when i connected my phone(Nokia X2) via USB cable that was when i started to have troubles. When i inserted the usb cable that came with the phone to my laptop, a prompt appeared that my machine was installing the drivers for my device. After about 5 minutes, the installation was complete and it prompted me to reboot my computer and so i did. Before it powered off, the machine said it was completing the updates first, then done. When it came back on, Windows failed to load and reboot my computer. The complete error msg was: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc & restart your computer.
2. Choose language settings, and then click 'Next.'
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: ntoskrnl.exe
Status: 0xc0000098
Info: Windows failed to load because a required file is missing, or corrupt."
I already followed the instructions since i have the disc with me but my laptop is still not working. I already did Startup Repair and System Restore but it didn't solve the problem. Please help me. Thank you so much!

mu5ik3r0 wrote:
Hi everyone,
I hope you can help me with my problem. I have an old pc suite version installed in my old laptop(about 6 years old - OS Windows Vista Home Basic) but today i decided to upgrade to the latest one(i think it's version 7). I was able to successfully install it. when i launched the application, it worked fine but when i connected my phone(Nokia X2) via USB cable that was when i started to have troubles. When i inserted the usb cable that came with the phone to my laptop, a prompt appeared that my machine was installing the drivers for my device. After about 5 minutes, the installation was complete and it prompted me to reboot my computer and so i did. Before it powered off, the machine said it was completing the updates first, then done. When it came back on, Windows failed to load and reboot my computer. The complete error msg was: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc & restart your computer.
2. Choose language settings, and then click 'Next.'
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: ntoskrnl.exe
Status: 0xc0000098
Info: Windows failed to load because a required file is missing, or corrupt."
I already followed the instructions since i have the disc with me but my laptop is still not working. I already did Startup Repair and System Restore but it didn't solve the problem. Please help me. Thank you so much!
Ntoskrnl.exe is a driver in Windows\ System 32. Replace with Windows\ Driver Cache\ i386\ ntoskrnl.exe in safe mode. If that doesn't work, you've to reinstall W7 as suggested earlier and make a backup with Macrium Reflect. It's not sure that your problem is related to PC Suite. Your PC or laptop might be to old for W7. Reinstall PC or OVI Suite as administrator in XP mode.
http://www.macrium.com/reflectfree.asp
http://europe.nokia.com/support/download-software/nokia-ovi-suite
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

App Server Fails to Start after Installation

Hi,
I've spent a whole day struggling with this, looking through forum discussions and trying out every single suggestion I've come across in the forums. I'm running out of ideas now and really appreciate any help I can get with this problem.
I'm trying to install SJSC2 (also tried with SJSC2u1 with the same outcome) on a new HP notebook (nw9440) running WinXP_sp2. I'm using the default installation done by HP.
My installation path is C:\Java\SunCreator2 (C:\Java\SunCreator2_1 for update 1).
After the installation the App server fails to start up and gives the below error in the server.log.
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d779c9d, pid=5368, tid=5760
# Java VM: Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode)
# Problematic frame:
# V [jvm.dll+0x99c9d]
# An error report file with more information is saved as hs_err_pid5368.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Upon looking at the install.log in the rave_home directory, I noticed the below sequence of errors.
Timeout waiting for domain creator to go to starting state.
Compiler warnings:
line 44: Attribute 'debug-options' outside of element.
line 62: Attribute 'port' outside of element.
line 73: Attribute 'port' outside of element.
line 84: Attribute 'port' outside of element.
line 105: Attribute 'port' outside of element.
line 116: Attribute 'port' outside of element.
line 127: Attribute 'port' outside of element.
line 145: Attribute 'port' outside of element.
line 156: Attribute 'port' outside of element.
CLI156 Could not start the domain creator.
The following script has unexpected output: "C:\Creator2\bin\deploy-ws.bat"
Aug 14, 2006 11:27:33 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:35 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:37 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
The following script has unexpected output: "C:\Creator2\bin\deploy-ejbs.bat"
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI137 Command create-jdbc-connection-pool failed.
CLI137 Command create-jdbc-resource failed.
CLI137 Command create-jdbc-connection-pool failed.
CLI137 Command create-jdbc-resource failed.
Aug 14, 2006 11:27:52 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:53 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:55 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:57 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
I've tried every workaround I've seen in the forums such as installing under different paths (both with spaces and without spaces), cleaning all the temporary files in the Temp directory, renaming the productregistry in the windows system directory. Each time I get the exact same error in the install.log.
I also tried installing the stand alone SUN App Server 8.1_02_2005Q2 as well as 8.2. I don't seem to have any issue with this installation or running of the stand alone server at all on the same machine.
Really appreciate any help I can get. TIA....
rgds,
KC

Hi,
After spending more time looking through the forum, I came across the below thread which has worked in my case (though it was suggested for Sol10x86).
http://forum.sun.com/jive/thread.jspa?threadID=62404&messageID=243113
This is the workaround that worked in my case.
> $ cd <Creator_Home>/SunAppServer8/lib
$ mv processLauncher.xml processLauncher.xml.trayIcon
$ cp processLauncher.xml.bak processLauncher.xml
# If you have a domains/creator/config/domain.xml
$ cd ../bin
$ ./asadmin start-domain creator
This started the app server. After that I was able to start and stop app server within the JSC as well.
Only difference between these two xml files seem to be,
processLauncher.xml.trayicon
<main_class classname="com.sun.rave.tray.RavePEMain"/>
processLauncher.xml
<main_class classname="com.sun.enterprise.server.PEMain"/>
Possibly pointing to a bug in the "com.sun.rave.tray.RavePEMain" class.
Thanks for your suggestions guys... and especially to Marco and Greg.
Rgds,
Kc
Message was edited by:
Kc

Form fails to open after installation of CADView 3D

Hello everyone:
I installed CADView 3D from EBS R12.1.1 (Vision Demo) from Operations/welcome user. After the installation Forms stop opening. It keeps giving me frm -92101 error. Can anyone help me here on how I can open forms again?

Hi,
What is the OS?
Did you verify that all the application services are up and running?
Also, post the complete error message including any entries from the application.log file.
Please go through the following documents and see if it helps.
Note: 468429.1 - On fresh install: Forms session <1> failed during startup FRM-92101
Note: 427714.1 - R12 fresh install FORMS DO NOT LAUNCH - FRM-92101/500
Note: 880088.1 - On fresh R12 install, forms session fauls with: FRM-92101: Forms Server oracle.forms.net.ConnectionException: Forms session <1> failed during startup: no response from runtime process
Regards,
Hussein

OC4J:HOME failed to initialize after installation of ADF Runtime

Hi Everyone!
I already asked this question in the Jdeveloper forum but I have some questions with regards to the OAS that's why I am reposting it again...
I am trying to deploy an application developed using Jdeveloper 10.1.3 in Oracle 10g AS version 10.1.2 residing in a different server. I have followed the steps required in deploying to an older version of OAS. I recompiled my applications to use J2SE1.4. I have also downloaded the standalone ADF Runtime Installer so that I can install the ADF components in OAS.
After the installation of the ADF Runtime, my oc4j:home process failed to initialize/startup. When i try to manually start it in the OEM, i received the following errors:
An error was encountered while loading page. Entity not found.
Resolution:
Entity not found
Base Exception:
The plugin OC4J did not have any documents associated with the Document Key OC4J_INSTANCE_ID:home;
Resolution:
Contact Oracle Support. Exception thrown by plugin "orionp":
The plugin OC4J did not have any documents associated with the Document Key OC4J_INSTANCE_ID:home;
Resolution:
Contact Oracle Support
There are no logfiles as well... When I tried to uninstall the ADF Runtime using the installer, i got the following error:
Uninstall Option is not supported for AS.
For the OAS gurus, I just want to know if its possible to recreate the oc4j:home?
Can i just delete the problematic oc4j:home and just create a new one?
We already have some forms-based applications that are running in our OAS. Will it still work properly if I recreated the oc4j:home?
Thanks!
JED

/OraHome/j2ee/home/confirm/server.xml check this xml file and it is empty or not. If it is empty than copy server.xml.old file in the same path directory to your server.xml file. Then try to start your home instance again.

PXE boot fails and reboots after loading PE

I have run into what I think is a unique issue and need some help determining the cause.
We are in the process of replacing and aging DP/PXE point (2003 R2 SP2) with a new server (2008 STD R2 SP1). What makes my pxe issue unique is that pxe works without issue on the existing 2003 DP/PXE server. But on the new 2008 server I run into
the following issue.
Environment: Config Manager 2007 R2, a single primary, multiple DP's and PXE points.
Issue: When I attempt to PXE boot a system, I am able to load PE, but shortly after the custom background screen is loaded, the system reboots. I've searched the internet quite a bit and found lots of potential causes including, bad/missing drivers,
certificate issues, rights issues, etc. None of these seem to be the cause.
My troubleshooting has determined that the client computers are unable to download the variables.dat file. I just don't know why.
We're using the same boot images on both servers.
I've tried using multiple computer models and VM's.
I've opened a command prompt as soon as our background image loads and have verified that the system is pulling a valid IP address. I am able to map a drive to the PXE server's REMINST share using our sccm net access account and manually copy the .var
file using xcopy to the appropriate directory on the local virtual drive. I've also attempted to manually run smstftp.exe by mimicking the command line from the smsts log file. I'll admit that I'm not sure I have the correct syntax for smstftp.
I've tried several variations and all but one result in a short pause and no file copied/created in the X:\sms\data folder. The one that does produce a result says that the file cannot be found. I checked for typos and made sure I used the name
of the newly created .var file.
I've also tried disabling anti-virus on the server, shutting off the windows firewall on the server, granting everyone read rights to the REMINST share.
Below is the smstslog file I've been using as a reference. Per corporate security policy, I have X'd out the IP address of the PXE server. The log file for the successful pxe boot from the 2003 server shows an exit code of 0 for smstftp.exe, a note
about successful download of the pxe var file and then it continues through the rest of the boot process.
-----SMSTS log file from a failed PXE boot on the new 2008 server -----
<![LOG[LOGGING: Finalize process ID set to 832]LOG]!><time="16:13:54.440+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="tslogging.cpp:1489">
<![LOG[==============================[ TSBootShell.exe ]==============================]LOG]!><time="16:13:54.440+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836"
file="bootshell.cpp:963">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL']LOG]!><time="16:13:54.440+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="util.cpp:869">
<![LOG[Debug shell is enabled]LOG]!><time="16:13:54.440+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="bootshell.cpp:974">
<![LOG[Waiting for PNP initialization...]LOG]!><time="16:13:54.471+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:59">
<![LOG[Booted from network (PXE)]LOG]!><time="16:13:54.830+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="configpath.cpp:198">
<![LOG[Found config path X:\sms\data\]LOG]!><time="16:13:54.830+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:553">
<![LOG[Booting from removable media, not restoring bootloaders on hard drive]LOG]!><time="16:13:54.830+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:564">
<![LOG[Executing command line: wpeinit.exe -winpe]LOG]!><time="16:13:54.830+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:767">
<![LOG[Executing command line: X:\WINDOWS\system32\cmd.exe /k]LOG]!><time="16:13:57.014+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="bootshell.cpp:767">
<![LOG[The command completed successfully.]LOG]!><time="16:13:57.014+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="bootshell.cpp:850">
<![LOG[Successfully launched command shell.]LOG]!><time="16:13:57.014+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="bootshell.cpp:430">
<![LOG[The command completed successfully.]LOG]!><time="16:14:41.458+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:850">
<![LOG[Starting DNS client service.]LOG]!><time="16:14:41.458+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:597">
<![LOG[Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="16:14:41.973+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880"
file="bootshell.cpp:767">
<![LOG[The command completed successfully.]LOG]!><time="16:14:41.973+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:850">
<![LOG[==============================[ TSMBootStrap.exe ]==============================]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="1" thread="1932"
file="tsmbootstrap.cpp:1039">
<![LOG[Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="0" thread="1932"
file="tsmbootstrap.cpp:1040">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL']LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="1" thread="1932" file="util.cpp:869">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL']LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="1" thread="1932" file="resourceutils.cpp:152">
<![LOG[Processor Is IA64: 0]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="1" thread="1932" file="tsmbootstrap.cpp:1005">
<![LOG[PXE Boot with Root = X:\]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="1" thread="1932" file="tsmbootstrap.cpp:921">
<![LOG[Executing from PXE in WinPE]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="0" thread="1932" file="tsmbootstrap.cpp:936">
<![LOG[Loading TsPxe.dll from X:\sms\bin\i386\TsPxe.dll]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="0" thread="1932" file="tsmbootstraputil.cpp:1319">
<![LOG[TsPxe.dll loaded]LOG]!><time="16:14:42.004+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="tsmbootstraputil.cpp:1329">
<![LOG[Device has PXE booted]LOG]!><time="16:14:42.004+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="tspxe.cpp:122">
<![LOG[Variable Path: \SMSTemp\2013.12.23.16.11.24.0002.{AB0FBE86-1F6C-47D7-919B-A44641035A2E}.boot.var]LOG]!><time="16:14:42.004+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932"
file="tspxe.cpp:134">
<![LOG[Variable Key Len: 61]LOG]!><time="16:14:42.004+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="tspxe.cpp:141">
<![LOG[Succesfully added firewall rule for Tftp]LOG]!><time="16:14:42.004+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="fwopen.cpp:123">
<![LOG[Executing: X:\sms\bin\i386\smstftp.exe -i XXX.XXX.XXX.XXX get \SMSTemp\2013.12.23.16.11.24.0002.{AB0FBE86-1F6C-47D7-919B-A44641035A2E}.boot.var X:\sms\data\variables.dat]LOG]!><time="16:14:42.004+000" date="12-23-2013"
component="TSPxe" context="" type="0" thread="1932" file="tspxe.cpp:177">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="16:14:42.067+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="commandline.cpp:229">
<![LOG[Set command line: "X:\sms\bin\i386\smstftp.exe" -i XXX.XXX.XXX.XXX get \SMSTemp\2013.12.23.16.11.24.0002.{AB0FBE86-1F6C-47D7-919B-A44641035A2E}.boot.var X:\sms\data\variables.dat]LOG]!><time="16:14:42.067+000" date="12-23-2013"
component="TSPxe" context="" type="0" thread="1932" file="commandline.cpp:707">
<![LOG[Executing command line: "X:\sms\bin\i386\smstftp.exe" -i XXX.XXX.XXX.XXX get \SMSTemp\2013.12.23.16.11.24.0002.{AB0FBE86-1F6C-47D7-919B-A44641035A2E}.boot.var X:\sms\data\variables.dat]LOG]!><time="16:14:42.067+000" date="12-23-2013"
component="TSPxe" context="" type="1" thread="1932" file="commandline.cpp:805">
<![LOG[Process completed with exit code 1]LOG]!><time="16:15:29.179+000" date="12-23-2013" component="TSPxe" context="" type="1" thread="1932" file="commandline.cpp:1102">
<![LOG[Succesfully removed firewall rule for Tftp]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="fwopen.cpp:146">
<![LOG[uExitCode == 0, HRESULT=80004005 (e:\nts_sms_fre\sms\server\pxe\tspxe\tspxe.cpp,185)]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932"
file="tspxe.cpp:185">
<![LOG[Failed to download pxe variable file. Code(0x00000001)]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context="" type="3" thread="1932" file="tspxe.cpp:185">
<![LOG[PxeGetPxeData failed with 0x80004005]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context="" type="3" thread="1932" file="tsmbootstraputil.cpp:1419">
<![LOG[HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1420)]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context=""
type="0" thread="1932" file="tsmbootstraputil.cpp:1420">
<![LOG[TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2236)]LOG]!><time="16:15:29.194+000" date="12-23-2013"
component="TSPxe" context="" type="0" thread="1932" file="tsmediawizardcontrol.cpp:2236">
<![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, true ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,937)]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe"
context="" type="0" thread="1932" file="tsmbootstrap.cpp:937">
<![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1106)]LOG]!><time="16:15:29.194+000" date="12-23-2013"
component="TSPxe" context="" type="0" thread="1932" file="tsmbootstrap.cpp:1106">
<![LOG[Exiting with return code 0x80004005]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context="" type="1" thread="1932" file="tsmbootstrap.cpp:1118">
<![LOG[Execution complete.]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:624">
<![LOG[Finalizing logging from process 832]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="tslogging.cpp:1736">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="tslogging.cpp:1578">
<![LOG[LOGGING: Setting log directory to "D:\SMSTSLog".]LOG]!><time="16:15:29.491+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="tslogging.cpp:1803">
This has been an extremely frustrating issue and any assistance would be greatly appreciated!

Thanks for your quick response Jason! I didn't expect someone to reply so quickly or I would have checked back sooner.
I had found the two 'older' posts already, but had not seen the 'newer' one. Unfortunately that did not give me any new ideas. But your comment on checking for TFTP availability did. Here are things I have tried since my original
post...
I re-ran most of my tests in case I missed something. I only found one change. Even though I double-checked, I must have made a typo when I manually ran the smstftp.exe command, because when I ran it again I received a timeout message instead
of file not found.
I had a minor 'thinking outside of the box moment' and decided to PXE boot the new 2008 R2 server itself. This was successful and I interpreted the success as meaning that the hardware is ok. Thinking there may be a compatibility issue with
the hardware and the OS, I tried a few different NIC drivers, settings, registry keys, and even a completely different NIC. No luck on any of these.
I decided to build another Server on a VM tovalidate my build process and configuration. And of course clients in multiple locations were able to PXE boot off this VM. Too bad I can't use this in production.
After reading your response Jason, I began to focus on network. I moved the server to a few different locations so it was utilizing different switches. No luck. I noticed in the event viewer for WDS that the server was logging the
beginning of the boot.var file via TFTP. This of course was not very surprising. What was surprising is that the very next entry (informational) noted that the client 'COMPLETED' the download of the boot.var file via TFTP. I know that completed
does not mean successful, but it usually implies or is interpreted as successful. It should have logged a warning or error, or nothing at all because although the process completed, it was not successful. I re-verified that the file was not downloaded
to the client and the client log file still shows the same error noted in the logfile from my original post.
Finally, I installed sniffing software on the server and ran some captures while attempting to PXE boot. Even though I am not much of a network guy, I quickly discovered two things. First, I found the section where the client attempts to download
the boot.var file. Unfortunately I don't think the local security team will allow me to post the capture, so I'll do my best to describe what I found. It starts with a single entry where the client calls for the file via TFTP protocol. This
is followed by a series of alternating entries (all TFTP) where it looks like the server attempts to send a portion of the file, and the client sends an acknowledgement. The sending entries all have checksum errors. The checksum received on
all packets is 0x0000 and of course should be something else. There is also a shorter section below this with alternating entries where the server attempts to send ICMP packets and the client responds with TFTP acknowledgements.
The ICMP entries are all marked as Destination unreachable (Port Unreachable).
The second thing I noticed from the network capture is the a few 'Spanning Tree Protocol' entries. I my search for a solution, I remember reading several posts saying that Spanning Tree can cause this issue. When I asked, I was assured that
Spanning Tree was disabled in this environment. It made sense too, because the 2003 PXE server was functioning properly, and Spanning Tree should affect both 2003 and 2008 servers, right?
Either way I will bring my findings to the network team and see what they have to say.
Any additional thoughts or ideas???

Unable to boot Windows 7 after first reboot (after installation and bootcamp driver)

Hi, I'm italian and I'm on a 2010-end Macbook Pro bought last month. I installed Windows 7 and then I installed the Bootcamp drivers.
I was able to operate the scroll of the mouse only magic-installing the 3.0 version ofBootcamp and then installing the missing drivers from the DVD Bootcamp 3.2. After that I rebooted the computer and tells me: "Could not start the computer" and start the recovery screen that remains indefinitely without ever doing anything, so I have to shut down by the power button.
How can I do to restore everything?

I have the exact same problem.
I've tried several times using both boot camp 3.2 whitch came with my computer, and using boot camp 4.0 that I got in the lion-update. Everything works fine until it restarts after installing the boot camp drivers, then it's the recovery screen that never finishes.
Anyone know what might be the problem?

Lightroom CC Crashes/Fails to Launch after Installation

Yesterday, I downloaded and installed Lightroom CC. Launching the program produced an immediate crash with no error message. I tried the fixes posted elsewhere on this forum without success. Subsequently, I contacted Adobe Support via Live Chat. The following steps took care of the problem and LR CC now opens correctly.
Logout of Adobe CC.
Open Finder, choose Go > Go To Folder.
Paste the following folder destination into the Go To box: /Library/Application support/Adobe.
Hit return to open the Adobe library folder.
Locate the SLStore folder and rename it to SLStoreold.
Locate SLCache folder and rename to SLCacheold.
Rename SLCacheold to SLCache.
Double-click on the SLCache folder and delete all files found in the folder.
Go to your Applications folder and re-launch Lightroom CC.
Sign on to Adobe CC.
If everything goes as expected, you should see the Lightroom CC splash screen followed by a message saying, "Catalog upgrade in progress." You may also see a Keychain prompt: "Adobe LR wants to use your confidential information stored in [long-file-name] in your keychain." Select Allow or Always Allow (if you don't want to be bugged again.)
Once Lighroom CC is open, look for your name plate at the top left corner of the LR window. If you haven't already signed-in to Adobe CC you may be prompted to sign-on by LR.
Hope this helps.

Many a times its due to Windows installer / registry issues -- Try using the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3)
and check.
Regards,
Ravi

Paravertualization failed to reboot after installation

Similar Messages

Maybe you are looking for