@Parent for Attribute value

Hi,
I'm trying to find a way where I can display in a form the parents based on the attributes of the children.
So, the attributes are assigned to level 0 of my dimension but I want the form to display the parent of the results of my attribute selection not level 0..
Is there a way to do this ?
Thanks.

This is not possible . You can apply @PARENT function only on Base dimension members and not on Attribute.

Similar Messages

Best way to add additional parent child attribute values.

I have a parent Child attribute in my dimension. I am currently displaying the correct ID value as the business wants. So now they can see the rollup of the ID(intOrgNodeID
values.They would also like to see the same rollup of the Name (vcharOrgNodeName) for this ID.However they do
not want it concatenated. They want to be able to see them separate.
You cannot create two parent child attibutes in one dimension so not sure if there is some simple trick to make this work?
It seems like there should be some simple trick for this.
My dimension table looks something like this
intdimOrgNodeID int Key (surreget key)
intOrgNodeID int (Actual ID)
intDimParentOrgNodeID
vcharOrgNodeName
In the Propertys I have set this below.
KeyColumns = tbldimOrgNode.intDimParentOrgNodeID
NameColumn = tbldimOrgNode.intOrgNodeID
Ken Craig

Hi Ken,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Charlie Liao
TechNet Community Support

Attributes value in Organizational Model

HI,
Iu2019ve created a new attribute for a org unit in scenario service. Itu2019s attribute REGIOGROUP based on values of this field of table ADRC.
Now, I need to maintain attribute values for this attribute for each OU to get BP determination.
The problem is that I need to have many different values in each OU for this attribute; for a several value entries, I need to automatically determine a OU for each BP.
Is there any way to set this values from a pre-created table or do I need to set this manually (all values in tx PPOSA_CRM for eah OU) ?
EX: OU 1 values 100101, 100102, 100103u2026 100999
OU 2 values 010110, 010111, 010112, u2026010199
Best Regards,
Teresa Lopea

check this link for [attributes values in organizational model|http://sapcrmlearn.blogspot.com/2009/02/organization-model.html]

Value . . is not permitted for attribute Date of Manufacture Message no. COM_PRCAT020

Hi
We are using CRM 7 ehp2 system we are facing a problem some equipment number is not updating from ECC to CRM.
showing following bdoc error message.
Value . . is not permitted for attribute Date of Manufacture
Message no. COM_PRCAT020
Diagnosis
You want to specify that the value . . is allowed for the attribute Date of Manufacture. However, in attribute maintenance or in the higher-level category ('parent category'), you specified that the value . . is not allowed for this attribute.
Error when creating objects
Message no. IB_CRM_UPLOAD_MSG019
Error when creating products from equipment BDoc
Message no. IB_CRM_UPLOAD_MSG012
Error when creating objects
Message no. IB_CRM_UPLOAD_MSG019
Error calling the upload BAdI; method: perform_load
Seeking your help for resolving this issue.
Best Regards
Manoj

Hi Manoj,
Refer to the KBA 1880999
This should be useful in resolving the issue.
Best Regards,
Gervase

Attributes and attribute values for a Product

Hi all
Is there any table or FM from where I can get a list of all the attributes and the attribute values linked to a particular product?
I got tables which link product with Prod Category, Prod Category with Set types and so on.
Could anyoe please provide me an FM which will give the attribute and its values for a particular product?
Please help!!
Regards
Debolina

Attributes created under s settype will be under the table with the name of that particular settype itself i.e Table name and the settype name are the same.
The other part of your question of where to find the list of all settypes and their corresposing attributes, you can make use of COMM_PR_FRG_REL.
Regards,
Harshit

Default value for attribute "COUNTRY" in BP_HEAD_SEARCH/MainSearch

Hi Gurus,
Requirement is to set default value for attribute "COUNTRY" in BP_HEAD_SEARCH/MainSearch when user clicks on Corporate Account.
Below is code that i have written in DO_PREPARE_OUTPUT.
Code is working fine and in the debug also i can see the value of COUNTRY is set to DE, but it is not showing on the screen for first time but when i load component second time(Refresh the screen), it shows me value.
Any help would be appreciated. If somebody has otheralternative kindly share.
CALL METHOD super->do_prepare_output( iv_first_time = iv_first_time ).
Calling Super Method
CALL METHOD super->do_prepare_output
   EXPORTING
     iv_first_time = abap_true.
Data Declatation
DATA :lr_col            TYPE REF TO if_bol_bo_col,
        lr_current        TYPE REF TO if_bol_bo_property_access,
        lr_param          TYPE REF TO if_bol_bo_property_access,
        lr_qs             TYPE REF TO cl_crm_bol_dquery_service,
        lv_attr_name      TYPE name_komp,
        lv_sign           TYPE bapisign,
        lv_option         TYPE bapioption,
        w_country_exist   TYPE c,
        w_param           TYPE string,
        w_value           TYPE string,
        w_flag            TYPE c.
Getting SEARCH Context Node
lr_qs ?= me->typed_context->search->collection_wrapper->get_current( ).
Get Selection Parameters
lr_col ?= lr_qs->get_selection_params( ).
Start from first parmaters
lr_current = lr_col->get_first( ).
Clearing Variables
CLEAR : w_country_exist, w_flag, w_param, w_value.
Loop till we have selection paramters
WHILE lr_current IS BOUND.         " While loop 1
checking attribute name is COUNTRY then setting some variable
    w_param = lr_current->get_property_as_string( 'ATTR_NAME' ).
    CASE w_param.
      WHEN 'COUNTRY'.
If country is filled then setting variable
        w_value = lr_current->get_property_as_string( 'LOW' ).
        IF w_value IS NOT INITIAL.
          w_country_exist = abap_true.
        ENDIF.
When we got COUNTRY attribute then setting flag
        w_flag = abap_true.
    ENDCASE.
Calling next parameter
    lr_current = lr_col->get_next( ).
ENDWHILE.                          " While loop 1
In below block we are checking is COUNTRY attribute is blank and
we have found COUNTRY attribute in current selection paramters
IF lr_qs IS BOUND.                 " SEACRCH CONTEXT BOUND
If vairable is blank means DE or any other value is not filled in COUNTRY Attribute
    IF w_country_exist IS INITIAL.   " w_contry_exist
We have to add selection attribute if we come accross COUNTRY attribute during our search
      IF w_flag EQ abap_true.        " w_flag
Adding COUNTRY attribute with default value 'DE'
        lr_qs->add_selection_param( EXPORTING iv_attr_name = 'COUNTRY'
                                              iv_sign      = 'I'
                                              iv_option    = 'EQ'
                                              iv_low       = 'DE' ).
      ENDIF.                         " w_flag
    ENDIF.                           " w_contry_exist
ENDIF.                             " SEACRCH CONTEXT BOUND
In below block we will remove COUNTRY attribute when it has blank value
IF lr_qs IS BOUND AND w_country_exist IS INITIAL.
    lr_current = lr_col->get_first( ).
    WHILE lr_current IS BOUND.
      w_param = lr_current->get_property_as_string( 'ATTR_NAME' ).
      CASE w_param.
        WHEN 'COUNTRY'.
          w_value = lr_current->get_property_as_string( 'LOW' ).
          IF w_value IS INITIAL.
            lr_col->remove( iv_bo = lr_current ).
          ENDIF.
      ENDCASE.
      lr_current = lr_col->get_next( ).
    ENDWHILE.
ENDIF.
Edited by: Harsharandeep Singh on Apr 28, 2011 3:44 PM

Hi,
Try it like this:
DATA:
    lr_bo        TYPE REF TO if_bol_bo_property_access ,
    lv_attr_name TYPE name_komp.
FIELD-SYMBOLS:
    <ls_param>   TYPE crms_thtmlb_search_criterion.
READ TABLE parameters
       ASSIGNING <ls_param>
       WITH KEY field = 'COUNTRY'.
IF ( sy-subrc = 0 ).
    <ls_param>-value1 = ip_pfct.
ENDIF.
CHECK ( me->parameter_collection IS NOT INITIAL ).
lr_bo = me->parameter_collection->get_first( ).
WHILE lr_bo IS BOUND.
    CALL METHOD lr_bo->get_property_as_value
      EXPORTING
        iv_attr_name = 'ATTR_NAME'
      IMPORTING
        ev_result    = lv_attr_name.
    IF lv_attr_name EQ 'COUNTRY' .
      CALL METHOD lr_bo->set_property
        EXPORTING
          iv_attr_name = 'LOW'
          iv_value     = 'DE'.
      EXIT.
    ELSE.
      lr_bo = me->parameter_collection->get_next( ) .
    ENDIF.
ENDWHILE .
Kind regards,
Micha

Value & is not permitted for attribute Sales Unit - Material Object

Hi gurus,I would very much appreciate expert advice on how to solve the problem I´m facing when lauching middleware object MATERIAL.
I have 2 BDocs in red showing the following error:
Value B20 is not permitted for attribute Purchase Order Unit
Value B20 is not permitted for attribute Sales Unit
I have checked table T006 and customizing and I do have unit of measurement B20 created on CRM so I don´t understand where is the error.
Could you please help me?
Thanks in advanced,
Regards,
Lorena.

Dear Lorena,
Many Thanks.
ok, I need to do manually in the CRM system. I have one question
1: If any changes in the ERP system the data is automatically replicated in to CRM system right? then Why we need to Configure again in the CRM system. for Examaple: Proudct group and Tax.
2. No, I did not replicate Sales Org., but this is also automatically replicated into CRM system. But it is already replicated into CRM i.e. Initial download.
my question is in r/3: If one customer have 2 Sales Area data is maitained in the R/3, that information is also available in the CRM side. if one more sales area is assigned to same customer, that information is also availbale in the CRM system right? but I could not able to find the new sales area data. what is the reason? and how I can dowload the changes in the CRM system?
I realy thanks to you, providing most valuable information and supporting to me.
kindly provide me where should I promote points to you.
I will try and let you know, if I am getting any problem, I will ask you again.
Thanks and Regards,
Jags

Setting property attribute values for multiple selected objects.

Hello,
Is there an easy way to set the attribute property values for more that one selected Table Operator Attribute (column) at a time. For example the target table has over 100 columns but I only want to INSERT/UPDATE 10 of those columns. The generated MERGE, INSERT and UPDATE statements will perform DML on all of the columns in the target table, setting the 90 columns with no mapping set to NULL. This is due to the Loading Properties 'Load Column when Updating Row' and 'Load Column when Inserting Row' both default to Yes. I would like to select multiple Attributes in the Table Operator and change the 'Load Column when Updating Row' and 'Load Column when Inserting Row' to No. This is similar to what you were able to do in Oracle Forms 9.0 Designer select multiple Items in a Block and change the properties en-masse.
Thanks

Hi,
Using OMB scripting to set attribute properties in a data mapping sort of defeats the purpose of utilizing a graphical user interface to define and set properties for a data mapping? Surely the GUI data mapping tool was created to get away from writing scripts and scripting would also require that you know the name of the data mapping, table operator and the set of attribute names for which you have to write one line of script to set each property value, i.e. 90 lines to set 90 attribute values.
Cheers,
Phil

Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'

Hi All,
I created the wsdl for mobile and I tried to send a SOAP request from Altova XMLSpy. However when I geive the wsdl in 'wsdl file location' I receive the following.
File http://127.0.0.1:8080/B1iXcellerator/exec/dummy/com.sap.b1i.vplatform.scenarios.setup/vPac.sap.B1Mobile/001sap0003_sap.B1Mobile.wsdl is not valid.
Invalid XML schema: 'Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'.'
Error location: wsdl:definitions / wsdl:types / xs:schema / xs:element / @type
Any Idea?
Vangelis

Hi,
it seems that Altove did not cope with defaultNs prefix that is used for marking default namespace.
just look up in your <xs:schema > tag what namespace prefix is used for your namespace - you shall find there something like this
<xs:schema xmlns:ns0="your.namespace.com" xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
and replace prefix defaultNs with prefix of your namespace (in example above it would be ns0)
There might be several usages of defalutNs iside of WSDL (at least in my case were two) so replace it everywhere using same approach
Best regards, Artem

API for parent-child flex value norm hierarchy

Hi,
We are looking for an API to create or delete parent - child flex value hierarchy.
Could someone please advice?
Thanks

Yes, I did check here but did not find any information.
http://irep11i10.oracle.com/OA_HTML/OA.jsp?page=%2Foracle%2Fapps%2Ffnd%2Frep%2Fwebui%2FInterfacesBrowsePG&_ti=2085868704&oapc=3&oas=ioOnKXcQLw-VgcHrVUTNXQ..

Extract XML attribute value for multi-item sequence

Guys,
I have already posted this in the XML DB forum, but am relying that some of you might help me.
I have been searching for a solution for this and couldn't quite get it. I'm trying to get attribute values from multiple entries in a Node. It workes for a single node, but for multiple nodes, it fails. Could you please give me a solution?
SQL> select extractvalue(column_value, '/WORLD/COUNTRY/@NAME') COUNTRY_NAME
2        ,extractvalue(column_value, '/WORLD/COUNTRY/CITY/@NAME') CITY_NAME
3        ,extractvalue(column_value, '/WORLD/COUNTRY/CITY/@POPULATION') POPULATION
4 from xmltable('WORLD' passing xmltype('
5 <WORLD>
6 <COUNTRY NAME="INDIA">
7 <CITY NAME="MUMBAI" POPULATION="10000"></CITY>
8 </COUNTRY>
9 </WORLD>'
10 ));
COUNTRY_NAME CITY_NAME POPULATION
INDIA MUMBAI 10000When I execute the same for multiple nodes, it fails, please guide me. Please also let me know how to handle if I have an XML file containing this data.
SQL> select extractvalue(column_value, '/WORLD/COUNTRY/@NAME') COUNTRY_NAME
2        ,extractvalue(column_value, '/WORLD/COUNTRY/CITY/@NAME') CITY_NAME
3        ,extractvalue(column_value, '/WORLD/COUNTRY/CITY/@POPULATION') POPULATION
4 from xmltable('WORLD' passing xmltype('
5 <WORLD>
6 <COUNTRY NAME="INDIA">
7 <CITY NAME="MUMBAI" POPULATION="10000"></CITY>
8 <CITY NAME="CHENNAI" POPULATION="2000"></CITY>
9 <CITY NAME="BANGALORE" POPULATION="13000"></CITY>
10 <CITY NAME="HYDERABAD" POPULATION="14000"></CITY>
11 </COUNTRY>
12 </WORLD>'
13 ));
select extractvalue(column_value, '/WORLD/COUNTRY/@NAME') COUNTRY_NAME
ERROR at line 1:
ORA-19025: EXTRACTVALUE returns value of only one nodeCheers
Sarma.

So, this is the first step:
SQL> with test as
2 (select xmltype('<WORLD>
3                 <COUNTRY NAME="INDIA">
4                 <CITY NAME="MUMBAI" POPULATION="10000"></CITY>
5                 <CITY NAME="CHENNAI" POPULATION="2000"></CITY>
6                 <CITY NAME="BANGALORE" POPULATION="13000"></CITY>
7                 <CITY NAME="HYDERABAD" POPULATION="14000"></CITY>
8                 </COUNTRY>
9 </WORLD>') resp from dual)
10 select country
11       , cities
12 from xmltable('WORLD/COUNTRY' passing (select resp from test)
13                         columns country varchar2(50) path '/COUNTRY/@NAME'
14                               , cities xmltype path '/COUNTRY/CITY') world
15 /
COUNTRY         CITIES
INDIA           <CITY NAME="MUMBAI" POPULATION="10000"/><CITY NAME
                ="CHENNAI" POPULATION="2000"/><CITY NAME="BANGALOR
                E" POPULATION="13000"/><CITY NAME="HYDERABAD" POPU
                LATION="14000"/>two columns, one varchar2 and one xmltype.
Then do the same thing with the second column, pass the XML to an XMLTABLE function
SQL> with test as
2 (select xmltype('<WORLD>
3                 <COUNTRY NAME="INDIA">
4                 <CITY NAME="MUMBAI" POPULATION="10000"></CITY>
5                 <CITY NAME="CHENNAI" POPULATION="2000"></CITY>
6                 <CITY NAME="BANGALORE" POPULATION="13000"></CITY>
7                 <CITY NAME="HYDERABAD" POPULATION="14000"></CITY>
8                 </COUNTRY>
9 </WORLD>') resp from dual)
10 select country
11       , cit.name
12       , cit.population
13 from xmltable('WORLD/COUNTRY' passing (select resp from test)
14                         columns country varchar2(50) path '/COUNTRY/@NAME'
15                               , cities xmltype path '/COUNTRY/CITY') world
16     , xmltable ('CITY' passing cities
17                columns name varchar2(50) path '@NAME'
18                      , population number path '@POPULATION'
19                ) cit
20 ;
COUNTRY         NAME                                               POPULATION
INDIA           MUMBAI                                                  10000
INDIA           CHENNAI                                                  2000
INDIA           BANGALORE                                               13000
INDIA           HYDERABAD                                               14000

How to ge the value for attribute for terminal services attribute in Active Directory from userParameters attribute

I am using dirsync to get the attributes value that have changed in Active Directory(changelog).
The following link explains how the dirsync is used to get attribute values :
'http://blogs.technet.com/b/isrpfeplat/archive/2010/09/20/using-the-dirsync-control.aspx'
I am changing the attribute Local path under Remote Desktop Services Profile of a user. I have ran a client which uses dirsync to get the changed objects in AD.
In the client the attribute that is changed is `userParameters` and the value is in encrypted form.
CtxCfgPresent P☺CtxCfgPresent???? ☻☺CtxWFProfi
lePath?↑→☺CtxWFHomeDir?????????????"☻☺CtxWFHomeDirDrive?☺CtxShadow????☺CtxMaxDis
connectionTime????☺CtxMaxConnectionTime????☺CtxMaxIdleTime???? ☻☺CtxWorkDirector
y?☺CtxCfgFlags1????"☻☺CtxInitialProgram?
Is there a way to get the actual value form the userParameters.

Hi,
What about other changed attributes? Are other attributes retrieved by DirSync control turn to be encrypted form?
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

DRG-10705: invalid value 149 for attribute TYPE_ID

When doing a call to the procedure ctx_report.index_stats on one of my index, I get a DRG-1075 and the procedure fails. I don't think it is data related because I can reproduce the error on multiple databases with different datasets. It is specific to the index I am analyzing though, I don't have the error on another domain index. A rebuild did not help.
There is nothing in metalink or elsewhere about that error, I don't really understand it.
If someone has a clue, it is welcome
ERROR at line 1:
ORA-20000: Oracle Text error:
DRG-10705: invalid value 149 for attribute TYPE_ID
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.CTX_REPORT", line 534
ORA-06512: at line 4
Regards,
Pierre

Thanks a lot for the answer, I have been under pression because of deadlines but I'll focus on this problem next week.
We have a serious performance issue with a text index on a XMType column (the index is very big one, 14G). The only way to get decent performance is to pin the DR$ I table in memory, but I had a bad surprise : when one do a ctx_ddl.optimize_index with rebuild the index becomes much bigger (from 14G to 18G) and so it does not fit in the keep cache anymore. A rebuild or a drop/create put back the index to the original size. I suspect that some storage options are changed but could not understand which. I'll do a test case and post it on this forum.
That's why I wanted the ctx_report.analyze_index but it fails (even when the base table is truncated, so you might be right, there could be a leftover from a previous index). I'll set-up a test case with a freshly created database.
The product manager, Richard Ford, wrote a white paper about putting the index in the keep cache, it makes a very big difference for us. But I think it should be adapted to the Oracle 12c case (with separate offset and BIG_IO for example).
I'll post the test case asap, thanks already for pointing me to the right direction.
Pierre

CRS-5008: Invalid attribute value: ce0 for the network interface

Hi all,
we try to install grid infrastructure 11GR2 (11.2.0.1) into Solaris Zone with shared network interface.
We also modified scirpt racgvip, so it will be able to login (via ssh with key authorization) to the global zone and add or remove interface on zone. Script itself works fine.
But it seems that orarootagent some how checks the interface, and returned error.
In the log of the orarootagent I can see error:
2010-10-01 21:38:49.573: [ AGFW][9] CHECK initiated by timer for: ora.net1.network sapdr2db2 1
2010-10-01 21:38:50.473: [ora.net1.network][17] [check] NetworkAgent::checkLink returned false
2010-10-01 21:38:50.474: [ora.net1.network][17] [check] NetInterface::sGetIpAddress {
2010-10-01 21:38:50.474: [ora.net1.network][17] [check] netInterfaceName empty.
2010-10-01 21:38:50.474: [ora.net1.network][17] [check] NetInterface::sGetIpAddress }
2010-10-01 21:38:50.474: [ AGFW][17] check for resource: ora.net1.network sapdr2db2 1 completed with status: OFFLINE
2010-10-01 21:38:50.476: [ AGFW][17] Executing command: check for resource: ora.net1.network sapdr2db2 1
2010-10-01 21:38:50.477: [ora.net1.network][17] [check] NetworkAgent::init enter {
2010-10-01 21:38:50.478: [ora.net1.network][17] [check] Checking if ce0 Interface is fine
2010-10-01 21:38:50.479: [ora.net1.network][17] [check] NetInterface::scheckNetInterface returned 0
2010-10-01 21:38:50.480: [ora.net1.network][17] [check] CRS-5008: Invalid attribute value: ce0 for the network interface
2010-10-01 21:38:50.480: [ora.net1.network][17] [check] NetworkAgent::init exit }
2010-10-01 21:38:50.480: [ora.net1.network][17] [check] NetInterface::scheckNetInterface returned 0
2010-10-01 21:38:50.480: [ora.net1.network][17] [check] NetworkAgent::checkInterface returned false
Does anybody know how the orarootagent checks for the network resource?
It seems that there are some procedures (NetworkAgent::checkLink, NetInterface::sGetIpAddress) inside it. But the problem is that this file is binary.
Or may be there are some ways to track how orarootagent checks?

>
2010-10-18 18:11:07.589: [ora.net1.network][9] {0:2:8} [check] Checking if ce0 Interface is fine
2010-10-18 18:11:07.589: [ora.net1.network][9] {0:2:8} [check] NetInterface::scheckNetInterface returned 0
2010-10-18 18:11:07.590: [ AGENT][9] {0:2:8} UserErrorException: Locale is
2010-10-18 18:11:07.591: [ora.net1.network][9] {0:2:8} [check] CRS-5008: Invalid attribute value: ce0 for the network interface
>
Is there anything I can do with it? Will appreciate any help!Is ce0 a valid interface on the machine? (has the global zone done "ifconfig ce0 plumb"?)
Is the zone correctly configured (check output of the export sub-command of zonecfg)?
--Sowmini

"Unterminated value for attribute '' in XML Tag ''.(SBL-UIF-00265)"

Getting this message when I do Edit Web Layout for a view in Siebel tools 7.8.2 "Unterminated value for attribute '' in XML tag ''.(SBL-UIF-00265)"...Anyone have any idea why I am getting this message?

Thanks Joseph,
Actually I looked at the Refer ID 1280569.1 before also, some how I could not figured it out the exact location as I was searching for two "(double quotes).
Today I tried again and finally I found out the culprit. In my case actually there was no two double quotes, instead the " (double quote) was missing.
Thanks again.
Edited by: user624054 on Oct 5, 2011 8:10 AM

@Parent for Attribute value

Similar Messages

Maybe you are looking for