Parking and Posting Documents FEBP,F-21,FV60 and FB60

Hello All,
Could anybody please suggest me how is the Parking and Posting Take place in SAP.
And do some Transactions like F-21 had to be given with FB01/FB02?
If FB01 is given what are the restrictions?
Are there any specific SOD's involved..
Replies and links would be greatly appreciated.
Thanks

Parking is a temporary hold of data for the FI doc. You don't need to have all the required data to park. Parking does not impact the financials for a company.
Posting does impact the financials.
F-21 is a parameter tcode for FB01 - so you don't need to have FB01 to use F-21.
SODs ? Depends on what your SOD matrix is.

Similar Messages

How to identify Parked and Posted Documents in GL Line Item Report

Is there any way to identify parked and posted documents in GL Line Item Report S_ALR_87012282? If i tick the parked documents in the further selection tab in the selection parameter, report will list all documents (parked and posted).
There is no available field in the layout. Is there any other way?
Thanks!

HI,
The other way to know the parked document details
use tcode: FBV3 - Display
OR
you can go to SE16 and enter table name VBKPF -Document Header for Document Parking
BSTAT = V
V = parked document
and ececute u will get the details of parked document.
Edited by: Manohar Mathkunti on Sep 13, 2008 11:11 AM

Read parked and posting document from one FM

Hi all,
IS theere any FM avaliable to read parked and posting document from one function module.
Please let me know if anything is there.
Thanks

Hi T,
have u searched in SE37 with words park?,i'm sure we have few FMs which will do the same.
regards
Prabhu

How can I attach j-pegs and other documents to an email unopened and stop each them taking up a whole page of my email ?

How can I attach j-pegs and other documents to an email unopened and stop each them taking up a whole page of my email ?

In addition to the last poster's suggestion - just so you know, it also depends on the email program the recipient uses as to how they will see any attachments - for instance, when I am using my Yahoo Mail, I am absolutely unable to view any attachment within the browser window - Yahoo forces me to download it; there is no way for me to check it (like a preview) to see if I want to download it or not.
And, FWIW: the window shown in the screenshot does not show on my version of Mail 5.1 (which is the latest for 10.7.2); the only one similar shows when viewing a message received with an attachment, not while sending one. So that must be a different version.

Changes between park document and post document

Hi SAP Gurues
Depending upon the business practice at the time of posting the approver changes the figure once the document is posted.How to know what are the changes have been made between the parking and posting.How to know it?
Your kind cooperation is solicited.
sk

Hi,
It better to use save as completed - reason being when SAVE AS COMPLETED the entire document is checked for parking i.e, simulted before parking.
Eg,
If cost center us not assigned, then when SAVE AS COMPLETED the an error msg will pop up.
if you want user to use only SAVE AS COMPLETED then in FB00 you can set the indicator for each individual.
Hope this info is usefull.
Thanks
Sujai C

Cropping and Post-Document Size

Hi,
I need to crop my images at 500x500 pixels for a project. I do a Save For Web & Devices and use JPEG, optimize at 80%. When I open up the new JPEG file, the pixel size says 500x500, but the document size says 6.944x6.944 inches at 72 resoultion, instead of 5x5 inches at 100 resolution. I've been doing the same process for months and it was correct in pixel and document size until recently, but I haven't changed any settings or my process. Does anyone know why this is happening?
Thank you,
Jennifer

Thanks, that all makes sense. I'm just curious though, why would Photoshop display the document size differently, one as 5"x5" at 100ppi (files I did months ago) and then recently it seems to have just decided that it wanted to display the document size at the 6.944"x6.944" at 72ppi? We've always done a "Save for Web" and not "Save As." Other than that, thank you for your responses, I understand.

Controller role Park and Post

Hi Experts
Here's what I got.
I need roles for my customer to park and post documents. This is what he is asking for:
Controller Role: No park, only post
Cost Acct Role: Park and Post, but no posting their own parked docs
Acct Clerk Role: Can only Park
I asked that he send me the transaction codes they will be using for this. Also, I thought I would use tcode SU24 and identify which authorization objects need to be interrogated. Anyone have a better solution?
I was able to get the tcodes the customer wants to use:
FB50 would be post only.
FV50 would be park only.
Edited by: Jim McCollum on Sep 10, 2008 10:50 PM

Dear JIM,
There is a useful document with screenshots on this wonderful functionality of SAP and this has saved lot of writing.
Link: [Click here|http://www.whypad.com/posts/sap-how-to-post-a-parked-document-fbv0/56/|Tip]
Trust this helps much and solves your problem!
Regards,
Ashok SINGH

Why can not freeze book inventory Storage location and Posting block?

Hello,
I tried to freeze book inventory storage location and posting block at storage location level in SAP.
1) OMBP -> "Freeze book inventory storage' is checked at that storage location.
2) MI01 -> the 'Posting Block' and 'Freeze book inventory' in the Physical Inventory Document is checked.
3) Post the Physical Inventory Document by using MI02.
But, I am still able to post inventory movement at that storage location after executing the above.
(I run MB1C with movement type 501 at that location.
I input the material number which are in the created Physical Inventory document.
The posted manterial document is created after I run MB1C.
The document date and the posting date in MB1C are the same date of Physical Inventoery Document.
I can see this material inventory movement from MB51!! )
My question is: Why SAP is allowed to execute the inventory movement after the 'freeze book inventory storage location' and 'Posting block' are checked at OMBP and MI01 ?
Any idea?
Help me, thank you.
Regards,
Sylvia Chen

Problem solved. Thank you for all help!!

Excise duty capture and posting..?

Hi all
Can anybody explain me about , excise invoice capture and posting ..
What is capture and posting excise invoice in CIN..?
1.When we capture excise duty..? were it wil go
2.When we wil post the same..? were it wil go
Thanks
sap-mm

HI,
Capturing Excise invoice means you are updating excise register Part1 on quantity basis.(Inward movement of goods like purchasing of raw material.)
Posting the excise is updated on value basis, in this RG23part2 rgister is been updated .it has financial implication.
Example:
In MIGO transaction itself, you can post Excise by choosing Capture and Post Excise Invoice. The FI document will be as follows:
RG23A Basic Excise Duty A/c Dr
RG23A Education Cess A/c Dr
To CENVAT Clearing A/c
After doing MIGO, you execute MIRO. In this transaction also, SAP will generate FI document automatically. The entry will be as follows:-
GR/IR Clearing A/c Dr
CENVAT Clearing A/c Dr
VAT Setoff A/c Dr
To AP-Vendor A/c
Regards,
Biju k

DMS (Document Management System) scanning Hardware and Software

Dear everyone
We are locking for a DMS system.
Requirements are:
1. Document Scanning Hardware and OCR Software. Automated metadata detection.
(Documents should automatically be assigned in Sharepoint)
2. Workflow management with Sharepoint and binding over WebService to Backend ERP and CRM System.
Where can I
find examples or case studies. Has anyone experience with such systems
(particularly scanning and document preparation 'OCR')
Regards
Kruljac Marijan

Are you looking for a bulk scanning and indexing software with data extraction capabilities? Do you want to scan and post documents and content to SAP, SharePoint or your DMS,
etc.?
Newgen offers OmniScan , a globally renowned, powerful solution for your enterprise wide scanning and content capture needs.
OmniScan can be used to scan paper documents, document images and forms. It can index them with business values and
export to other enterprise systems such as SAP, SharePoint, DMS, ERP, etc.
http://www.nwgn.us/1fxeP7O
Regards,
Shreya Muralidhar

BAPI_COPAACTUALS_POSTCOSTDATA Posting document number

Hi,
I am using BAPI : BAPI_COPAACTUALS_POSTCOSTDATA for posting documents of type 10, B0 , 12,B2(01,02,03,04 – Paledger no’s).
My requirement is to post records with same document number for all the 4 currency types in ce10100 table as in screen shot no :
I tried below way
For Paledger number 01 , Belnr is blank and posting document by calling BAPI ,now I am using this posted document number from ce10100 table for rest of the 3 types of documents since my requirement is that I need the same document number for all the 4 types of documents
When I am using this method to post using test run from se37 I am able to post in required way .In my Z Program when i post one document each time by changing currency type(as 10, B0 , 12,B2 )and exit from Program I am able to achieve this functionality but if I am using same method for multiple records from Internal table it s not working ,it is generating new document number each time when posted as below screen shot
. I am using Transaction Commit also both when testing in Se37 as test run and also in Z Program.
Please help me in this issue.

There is in fact a workaround to this issue. I see this question asked in lots of places so I figured I would post here:
4) Although the BAPI does not return the resulting document number and the forums say you cannot do it, this is a workaround that is somewhat hardcoding and requires familiarity with the data. In this example, we expect that the ww106 field is a unique value. Indeed, we went so far as to index the CE table. By specifying the ORDER BY clause, we can make sure we grab the most recent entry first. This is captured immediately after calling the BAPI and doing the BAPI_TRANSACTION_COMMIT and WAIT.
CALL FUNCTION 'BAPI...
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
SELECT paobjnr pasubnr FROM ce41010 UP TO 1 ROWS
BYPASSING BUFFER
INTO (wa-paobjnr, wa-pasubnr)
WHERE ww100 = itab-key1
AND ww109 = itab-key2
AND ww106 = itab-key3
ORDER BY PAOBJNR DESCENDING PASUBNR DESCENDING
ENDSELECT.
There are a few tips and tricks for working with this BAPI posted here:
[http://raymannion.com/2011/bapi_copaactuals_postcostdata/|http://raymannion.com/2011/bapi_copaactuals_postcostdata/]

FI-CAX event 1102 when posting documents using BAPI_CTRACDOCUMENT_CREATE

The event 1102 in FI-CAX has been implemented to copy "Alternative business partner for payments" to the document, when posting a document using transaction FPE1.
Will this event aslo be executed when posting documents automatically via the BAPI BAPI_CTRACDOCUMENT_CREATE?
If not, is there any other possibility to copy "Alternative business partner for payments" to the document, when posting a document automatically via the BAPI BAPI_CTRACDOCUMENT_CREATE?

Thank you!
In our system this note has not been implemented yet so this is something we need to fix.
Do you know if event 1102 is supposed to be called when running FP60M/FP60P (mass activity: revenue distribution/Revenue distribution: Create and post documents)?
Cheers,
Teo

Wrong Sales UOM in Article and Billing document

Hi,
We have an issue in Aggregated Sales Idoc Posting. There is an article which is having Base UOM as "EA" . It has "CAR" = 12 EA.
So 2 UOMs are there. From POS when the file is posted with 1 CAR , in SAP Billing and Article documents created only with "EA" and not with"CAR".
In Aggregated "WPUUMS" IDOC,Sales UOM field is there and we checked the Idoc and it contains "CT" for CAR as Sales UOM , but while posting ,it takes the Bases UOM. In this case "EA". Its posting the right quantity as 1 for CAR.
Please help

Hi,
There is no any option to change currancy at time of invoice creation
But round the way solution is available
Create sales order with CLP Currancy (VA01) >>> Delivery (VL01N) >>> Create invoice with CLP currancy (VF01)
Then go to t-code EWUO
And change the currancy of sales document
Kapil

MM and FICO document can not be updated in Production System

Hi Expert,
starting today we cannot posting any FI and MM document
We can SAP system and run any t-code normally but by the timeuser want to post the document. Document numbers (from running number) are created but when we need to display the document, document is not exist.
I have checked the table, but there is no record created for new created document number.
Example:
We conduct posing clearing for FI doc. From FB03 no data exist and from table BKPF no data exist also,
Thanks
Please help.
Rgds,

Hi
You should also check if any summarization is active in your system. The path is:
IMG>Financial Accounting>General Ledger Accounting>Business Transactions>Integration.
Here you need to check if summariztion is active for any fileds, like amount , plant, profit center etc for Table BKPF for reference Transactions like MKPF in MM, VBRK in SD.
Also confirm from the Basis Consultant if enought disk space is available for data base. Generally, this kind of error would happen because of the two reasons that I have already listed. Also try searching for a suitable OSS Note. Check also from a system ID with SAP ALL rights. Run SU53 in the Transaction FB03 with the Document Number for which you are getting the error to see if any authoriztion object might be missing. You need to involve your Basis Consultant for this.
Regards
Sanil Bhandari

Manual Bank Statement - Posting in FEBP Issue

Hi Experts,
Our Test scripts on Manual Bank Statement Processing requires us to 1. Process Manual Bank Statement in FF67 and 2. Post the entry in FEBP.
We were able to process the transaction in FF67, but not able to post in FEBP. We have tried by giving following parameter in FEBP:
Bank St Details like date, statement number, house bank id, account id and company code and Pstg Param as Post Immediately, Assign Value date to Account and Output Cntrl as Print Bnk Statemetn and Print Posting Log.
We are getting the following Error: "List Contains no data"
But we are able to Post this transaction in both FEBAN and FF67. I like to get some experts opinion on this issue to fix it. Thanks in advance!
Ganesh

Thanks for your Input.
Just thought of further detailing my scenario and get your inputs to proceed further:
When I say, I have updated FF67, I have updated the Transactions in Process Manual Bank Statement Screen and hit Save Icon and I have not posted the transaction in FF67.When I come out of FF67, it was giving an warning message that transaction was not posted still want to Exist? I was then giving Yes and going to FBEP to pull out those details and post through FEBP, it was giving above mentioned error. List Contain no data.
But I was able to Post it either in FF67 itself or through post processing transaction FEBAN. Is there any GL Posting Assignment setting relating to this issues?
Ganesh

Parking and Posting Documents FEBP,F-21,FV60 and FB60

Similar Messages

Maybe you are looking for