Partial divestiture : transaction type

Dear SDNers,
I have a simple question concerning the Partial divestiture activity :
Is it normal that the system doesn't post with "Disposal" transaction type when we have a Partial Divestiture ?
Is it possible to change this behaviour ?
Many thanks
Regards,
Thibaud

Hi Dan,
In fact it was a bug that can be corrected by note 824843 - "Flow types with Equity postings"
Thanks for your reply
Regards,
Thibaud

Similar Messages

SEM BCS V6.03SP4 - COI - Total divestiture - transaction type incorrect

Hi,
I want to manage the activity total divestiture (N°11)
When I executed the task COI, the system for items and balance is correct but for the transaction type is incorrect.
Indeed, for the company who sells the investment , the system uses the OPENING FLOW (001 - F00) !
Do you now how to manage this correction in order to have the divestiture flow ?
NB : I don't see the SAP notes for this correction
Thanks by advance
Bastien

FYI
I applied the sap notes 1742121 and 134940
The transaction type is correct for earning item
But for investment item , we have already the opening transaction type!
Reminder opening code
001 for standard BCS
M01 with preconfiguration IFRS
F00 with BFc codification
Bastien

Transaction type to dispose the asset only for the depn areas 01 and 02

One of the Company codes XXXX plant XXXX has an isuue for asset # XXXXXXXXXX-0 this asset was partially retired in Nov.2008 and now its acquisition value is JPY312,428
which should not be an asset under US GAAP but qualify for asset under Tax book . So it needs be removed from US and JCC book(01 and 02 area) but keep the record on the Tax book(area 15).
Is there any transaction type to dispose this asset only for the 01 and 02 area but keep the historical data for 15 area?
Thanks for helping in advance

Can I suggest you a way to handle this? Just give a try and see whether it works for you or not.
Post a Credit entry to the Asset only to the area 01 and 02. Please follow the below steps before you do this.
1. Go to main SAP screen => System => User profile => Own data => Parameters
Add parameter ID FAA_FB01_AREA_SWITCH (Turn On Value Entry at Area Level for FB01) and mark "x" against it in Parameter value. Save this changes.
2. Go to F-02, Enter the Asset number (posting key 75 and transaction type 105, which ever you feel like) and then in the next screen, enter the amount. Here in this screen, you will find a tab named area values. Click that tab and change the values Area 01 & 02 to $0.01 and leave the Area 15 as it is. Enter the appropriate dr line item and save the document.
3.Go to AW01N and see tha values against each of the areas.
please revert in case you have any questions.

EBS - Electronic Bank Statement Multiple Posting Rule for One External Transaction Type NTRF

hello SAP Gurus,
I'm configuring EBS - Electronic Bank Statement. My requirement is for Bank External Transaction Type NTRF <for Incoming Payment> I want to assign 2 posting rules for Posting Area 2 that is Sub-Ledger posting viz. <1> For the payments received from Customer which should clear the Customer Open item since it is bill to bill exactly matching the open line item and <2> For the payments which should not clear the Customer Open item since i know that they are not bill to bill and only partial against the original line item
Is this possible? if yes then how?
Currently, SAP allows only one assignment like one external transaction type NTRF => one Posting Rule <either clear the sub-ledger-system picks FB05 or just post on Sub-ledger so that not to clear - system uses FB01 >
Journal for Posting Area 2:
Bank Clearing Account Dr
To Customer Account Cr <either set this to clear with original invoice / or just post on customer so as to clear/handle it manually later on once paid fully>
So, what is the solution; how can i differentiate my incoming whether fully payment or partial payment; since bank statement always tag it to external transaction type NTRF always for any incoming payments !
regards,
`raj.

Hi,
You cannot create separate rule with sub ledger postings while executing electronic bank reconciliation.The reason is your bill to bill transfers should posted to bank sub ledger account first and then you can write a BDC to clear sub ledger account.Otherwise use F.13 to clear the sub ledger account.
Regards
Chrishantha

CIN Transaction Type Concept and Linkage

Hi all !
Can anybody Please explain the transaction type Concept in CIN. ( Like GRPO) and its linkage with the excise transactions processing.
Also i need the customization settings for Transaction Type and its linkage with Accounting.
Thanks in Advance !!!!!

Few more inputs on CIN:
See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Customizing : Make the settings in Customizing Basic -> India -> for Logistics General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and -> Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
- Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
- Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
- Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
- Material master data
Each material is assigned a chapter ID.
- Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
status 7.
Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
determination.
- Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
- Assign Tax Code to Company Codes
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
- For taxes on purchases, use the condition types contained in the tax procedure.
- For taxes on sales, use the condition types contained in the pricing procedures.
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements - You have set up G/L accounts for each of the processing keys listed below.
- Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
- VS1 (basic excise duty)
- VS2 (additional excise duty)
- VS3 (special excise duty)
- VS5 (sales tax setoff)
- MWS (central sales tax)
- MW3 (local sales tax)
- ESA (service tax)
- ESE (service tax expense)
Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example:
- Excise TT DC ind Account name
- GRPO CR CENVAT clearing account
- GRPO CR RG 23 BED account
- GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
- Excise group
- Company code
- Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
- Defined the G/L accounts
- Defined the excise groups
- Maintained the transaction accounts
Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
- Material Master à Logistics General
1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Sub screens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade
Import, Excise related sub screen appears.
Thanks,
Kumar Arcot

Open follow up transaction type screen automatically after confirm account

Hi Gurus,
I have a transaction type Z010 for interaction record that is copied from standart 0010 transaction type.
I define dependent transaction type SRVO that is service order as a follow up of Z010
My requirement is to open automatically open service order screen after confirming account
As agents must do everything vey quickly while they are on phone, it is needed urgently.
Now they have to open Z010 interction record screen, have to press follow up button, click to clipboard and then can open the scrren of service order.
How can we automatically open service order screen after confirming account??
I will be very pleased if you will help...
Thanks.

Hi Denis, thanks for reply.
I read it and see that interaction record is automatically created. How can it be made, is it a standard customizing?? Our interaction record is created automatically when follow up process-it is service order here- is created. First we confirm customer, then press to Interaction Record at the left hanside, then in this screen we press follow-up button, then click on Activity Clipboard, then service order screen is opened. I want to pass two steps, pressing Interaction Record and pressing follow up record, how can I do this??
Exactly I have to define process type Business Activity for interaction record, I can't give Service Order process type directly to interaction record. Service Order type must be dependent to business activity, is it true?? If there is a way to directly giving service order type as an interaction record type, and making interaction record creation automatically after confirming, my problem is solved as very well.

Transaction type 100 not possible (posting to affiliated company)

Hi All SAP Guru's
I am trying to post asset acquisition through F-90
Asset Dr Transcation Type 100
To, Vendor Cr
while saving the above document i am getting an error Transcation type 100 is not possible (Posting to Affiliated Company)
to explain further my client are using Trading Partner Concept, may be that is the reason document is not getting posted
In Transcation Type I tried to change Post to affiliated Company then system allowing to post the document, but in real sense we should not give post to affiliated company at Transcation Type
can anybody help, is there any alternative to go ahead
Regards
Sreenivasulu
Edited by: sreenivasulu VAS on Feb 26, 2009 1:57 PM

Hi,
When there's a trading partner in the document, you need to use a different transaction type for external acquisition.
Have you tried this? (I've used this one. without chaging document type setting)
150 Acquisition from an affiliated company
Difference from Transaction type 100 is posting type. 150 has a posting type of 'Post to affiliated company' whereas 100 has not.
Check with IMG (T-code: AO73)
Heeseon.

Transaction type ZGC not possible (posting to affiliated company) in ABSO

Hi all,
We have depreciation areas 01, 30, 31, 32 .
dep area 30, 31, 32 inherits the values from 01.
We want to post credit value to dep area 01 after doing the aqusition .
Hence we created a seperate transaction type ZGC ( in aqusitions- Tcode AO73) and limited it to dep areas 01, 30, 31, 32.
Transaction type ZGC is having credit and " do not post to affliated company " radio button is selected.
Now the issue is when we run ABSO to do a credit post in dep area 01 we are getting the below error .
Transaction type ZGC not possible (posting to affiliated company)
Message no. AA390
Diagnosis
For the current document, you specified either implicitly (via the customer/vendor), or explicitly (with a manual entry), that this posting is to an affiliated company. In this case, Asset Accounting requires you to use special transaction types. This enables the system to separately identify such transactions.
Procedure
Check the line items that you have already entered, and the transaction type you entered.
Not sure why it is asking for affliated company .
It will be great if any one help on this why we are getting this issue.

Hi Daya,
Please try to choose Trans.Type 100 in AO73 transaction code and select the radio button Post to affiliated company under Posting type.
Thanks,
Kumar

Transaction type 100 not posible (posting to affiliated company)

Hil
While asset acquistion posting in f-90 ia geting error message "Transaction type 100 not posible (posting to affiliated company)"
can you please give solution for this one

Hi
pl check following settings in spro Img->Financial Accounting-Asset Accouning----Transctions--Acquisitions-Define Transaction Types for Acquisitions-in choose activity window -dbl clk on "Define Transaction Types for Acquisitions"
select transaction type 100--click on details--check posting type. if " Do not post to affiliated company." is selected then choose another transaction type which allows acquisition with option "Post to affiliated company"
regards
Vishwas
Edited by: Vishwas_bapat on Mar 24, 2011 1:24 PM

Transaction type not found while creation of service order/ticket

Dear All,
I had done all basic configuration of CIC but i am not able to create service order and service ticket.
When i trying to create i am not able to find any transaction type but if i want to create follow-up document from CIC screen then i am able to create both the thing. I am not able to find out where is the problem. can any body help me out.
Thanks & regards
Neeraj

Hi Francis,
Thanks
I am on Interaction Center WebClient 2007.
I have already done the configuration and Transaction type is popping up for selection screen but once i select the transaction type then system automatically canceled the transaction "Transaction Cancelled"
But in the same time if i am trying to created follow-up transaction with reference to previous transaction then i am able to created service ticket/service order.
what could be the problem?
Regards
Neeraj

Transaction types are not getting displayed in WUI CRM7.0

Hello Gurus
After upgrading the CRM system from 4.0 to 7.0 we are not able to see the trasaction types for the activity mangment in WUI....i have also assigned the transaction types to the channel CEM Webclient UI
Suggest how to over come this ...
Regards
Sree

Hi sreeram,
go to crm -> transactions -> basic settings -> define transaction types
copy default email cx03 and create new zemail.
assign that zemail to bus2000126 business activity.select the business activity and click on customizing header.assign the category email. click on channel. maintain the channels 1)GUI crm webclient UI, 2)ICW Interaction center webclient.
save the changes.
go to crm -> transactions -> basic settings -> settings for activities -> maintain categories, goals, priorities -> click on assign categories to transaction types.
assign the category email(which you have assigned above) to the transaction type zemail.
even check maintain categories as well
click on maintain categories -> check 401 email assigned to class G email.
Regards
Krishna

Z Transaction Types not showing up at creation in CRM 5.2 WebClient

Hi Experts,
I am using CRM 5.2 with webclient.
I have just created 3 transaction types (BUS2000126 & BUS2000125) copied from standard ones.
I passed all other transactions as Inactive in SPRO.
In GUI everything is OK, I can create each of these transactions properly.
But in WebClient, when I click on "New", the pop-up appears but there is no value in it.
Is there anything I would have forget in my customizing, anything I should do in the BOL???
I 'd appreciate any help and reward with maximum points for any helpful answer,
Thanks,
Aldo

Aldo,
I know for activities (BUS2000126) they must have the correct category assigned in order to show up in the creation list. This is set under Assignment of Business Transactions Categories, and the customizing header data for the category Activity for the transaction you created.
The class CL_CRM_UIU_BT_ACT_CUST_GET controls this logic. There are calls to CRM_BSP_SALES_GET_PROC_TYPE which will retrieve the list of possible transaction types. You can look at the method GET_PROC_TYPES_FOR_SCREEN_KIND in class CL_CRM_UI_BT_ACT_CUST_GET to see this logic.
The class of the category of the activity must correspond to the allow values.
Take care,
Stephen

Problem about creating asset transaction type

I created an asset transaction type with AO76 to deal with the apportionment of asset expenses which was created in the year before yesteryear.But the user demands an account assigned to the transaction type .Then I checked the configuration.It seems t-code AO85 can only realize the relationship between asset classes and accounts.
So what should I do to realize this? Thanks!

or if you still want to achieve it. Go for substitution. make the Gl account the substitutable field and then define a rule saying that, if the transaction type is ' ', then the gl account is ' '
Regards
anantha

Transaction types(PO types) not visible on SRM 7.0 portal

Hi all,
We added transaction types in the SRM 7.0system.But these are not reflecting in the SRM 7.0 portal.
Under Purchasing role ->create Documents -> Purchase order .
Once I click on the purchase order it is giving a table with columns PO type and PO desc.
and showing a message the table does not contain any data.
But SRM consultant added the transaction types(PO types) in the backe nd.
Is there missing configuration steps?
Thanks and regards,
Rajesh

Hello Rajesh,
Few more pointers, if works:
1. Check the roles, sometimes security restricts role by document types.
2. Extended classic scenario is activated.
3. As a standard, there are 3 purchasing tabs in SRM 7.0 for buyer depending on portal roles, ECC, SRM & harmonized role (ECC & SRM), Check if you are trying to create PO in SRM/Harmonized role purchasing tab & not in ECC. Easiest way to check is you will have shopping cart POWL visible in SRM purchasing tab.
Hope this helps.
Thanks
Ashutosh

How to allow create different transaction type for different customer

We are using CRM 7.0 now. We have two types customer, one is sap customer, the other is potential customer. We want to distinguish the two types customer. And user can create all transaction (for example: quotation, opportunity, activity) the sap customer. And the user only can create activity for the potential customer, they can't create others transaction type for potential customer. How can we realize it? Thanks.

Hi,
We can make use of the BLOCKING REASONS to realize your requirement.
A Blocking Reason can be assigned to the Business Partner role dependent data and to the transaction type. A Business partner can be used in a transaction only if he is not assigned to this blocking reason.
For Ex, In your scenario you can create a Blocking reason 'Not a SAP Customer ' and assign it to all the Potential Customers. You should assign the blocking reason to all the transaction types which the potential customers should not be allowed.
Hope it helps. Please let me know if you need further help.
Regards,
Vamsi.
Edited by: Vamsi Krishna Potta on Sep 7, 2010 9:41 AM

Partial divestiture : transaction type

Similar Messages

Maybe you are looking for