Partial Invoice in MIRO

Hi All,
While posting partial invoice for the Pos with multiple account assignment, partial invoice field in PO will determine whether the invoice can be distributed in proportionately or in sequence.
But our business team want to have the selection in MIRO transaction. At the time of posting the invoice they will decide whether it is distribution proportionately or in sequence.
Do we have that field in MIRO? Could you plz help me to identify the field?
I could see multiple account assignment in MIRO but not the partial invoice field.
Thanks,
Arun

Thanks Charlie.
I am aware of that. But do we have that "partial invoice" field where we can select teh distribution as proportionate or sequence.
My POs item are having around 30 to 45 account assignments. In that case it is not possible to manual distribute the amount.
Please advise.
Thanks,

Similar Messages

Is partial invoicing possible in MIRO

is partial invoicing possible in MIRO

Sridhar ,
once again thanks for ur quick follow up on this. Your answer seems to be good, but not very clear:- u said
"It seems there is a tolerance limit stopping to post invoice"
that means Invoice can not be posted(system wont allow it to post). If it cant be posted then:- where is the question of
"Check in MRBR transaction which indicator blocked your invoice"
Could u please clarify the above.
Thanks in advance for your time and quick follow up on this.

Is it OK to use F-47 and F-48 for partial invoicing plan with down payment

Dear all,
In the case of partial invoicing plan I am using a separate row for down payment ,
The total of the sum is greater than the PO line item
But after the f-47 and f-48 and miro for actual mile stone the partial invoicing plan is not coming gray.
What would be the procedure for down payment for a partial invoicing PO (Milestone PO) ?
Thanking you
Joydeep Mukherjee
Edited by: Jeyakanthan A on Jul 26, 2011 10:24 AM

Dear sir;
First of all thank you for your kind reply , I have first created On PO like below for example.
total amount 8,000.00 Rs
30.00% 2,400.00 down payment
12 30.00% 2,400.00
13 30.00% 2,400.00
40.00% 3,200.00
PO is linked with project activity ,whenever the project person accept the activity in the PO invoicing plan, the line item status is unlocked ,and then I directly i go for MIRO,the amount is taking automatically percentage wise ,but when I go for the advance payment with F-47 & F-48 the vale I have to enter maually and after MIRO .How to solve the problem .
Thanking you
Regards;
Joydeep Mukherjee

Partial invoicing

Hello,
I have created one PO with account assignment K and using multiple account assignment. Now when doing Miro, for doing partial invoicing, quantity can not be edited and is grayed out. Pls suggest how to edit it.

Change the Layout as shown below
then you can see the Acct Assign tab in the line item
click on the Acct Assignment
Here change the quantity and amount...
Then check..

Report for Partial Invoice and pendinf Invoices

Hi all,
We need a report for Partial Invoices /Pending Invoices done w.r.t. Purchase Orders with PO document type as one of the selection option.
We have tried ME80FN, please suggest if there is any other report available.
thanks,
Prashant Rathore

hi,
check ME2N or ME2M with proper selection paramter value...
and get results...
or
check PO history EKBE table...
Regards
Priyanka.P

Rejected sales order item after partial invoice

Dear All,
We have a partially invoiced (and paid) sales order. Now the customer (and we) wants to cancel a sales order item. So we set reason for rejection at item level. In VA05 it still displays the SOI as open and status is being processed. How to proceed, it should not be displayed as open when it is rejected in VA05.
Can I change the billing plan so that the invoice does not mind the items I want to reject should I ste a billing block? Delivery Block?
Best regards,
Michaël
Edited by: spimic on Oct 5, 2010 6:21 PM

Hi,
Take the help of ABAP'er, and explain him that as soon as sales order is invoiced(partially), set the rejection reason to sales order.
And also define the rejection reason and assign these rejection reasons to billing types.
Regards
Ashutosh

Cancellation of Excise invoice after MIRO

Hi Everybody,
How do i cancel the Excise Invoice after MIRO.my scenario is Net Inclusive of Excise duty. the procedures which i followed as follows,
1.PO with Zero Tax code > J1iex(captured the Excise Invoice)>GR which refers EI>Posted EI.
After posting EI i found thats wrongly captured then i did canceled the EI as follows
2. GR Cancellation>Posted EI against canceled GR>Canceled the EI.
Now my RG23A got cleared.then i did again step 1 as well as MIRO.After did miro again i found that captured EI is Wrong. I have to followed below procedure to Cancel the EI,
3.Cancell the MIRO document in MR8M>GR Cancellation>Posted EI against canceled GR>Canceled the EI.
When i tried to POST EI one pop up message is coming i.e status of EI one is for INPROCESS another one one is for Posted .I chose Inprocess and entered i was getting following Error
No Part I exists for availing credit in excise invoice 364 2008
Message no. 4F112
If i Chose POSTED i was getting following error,
Excise invoice 364 2008 has already been posted for vendor 103769
Message no. 4F107.
Can anybody tell me where i'm wrong what procedure i need to follow
Regards
Govindaraj

hi
plz check the document year for inprocess and posted doc
now steps for excise invoice cancellation will be as follows
1 cancel MIRO document with MR8M
2 cancel MIGO document in MIGO
3 goto J1IEX choose post here give the excise invoice no of the document (u will get this no from table J_1IEXCDTL and field DOCNO)
4 now in misclinious tab give the rejection code and simulate u will find all the duties are reversed (compare with previous posting)
5 now ur invoice is cancelled and u can go for new GR and new postings
regards
kunal

Error while posting INvoice in MIRO *** URGENT****

Hi,
System is not allowing me to save an invoice in MIRO which says Reference date and Asset value date in the LINE ITEM are not in date format "//--" though we have left thefields as dafault (and have entered nothing there).
These fields are filled with some default format with say like "//" . I have deleted these dots and i have tried to post the invoice again. Still the system says Reference date / Asset value date in the line item is not in date format "//".
This problem is arising only when i try to pass capital bills and not for others.
This problem was not there even before upgradation to 6.0 (Recently upgraded from 4.7)
Do i need to change these fields as optional ??? Why it was not there previously ??
Pls advise.

Hi,
Change the date format from Manu Bar> System > User Profile> Own Data> goto tab Defaults and change the date format to DD/MM/YYYY before doing MIRO.
Thanks
VK

Same nr range in Invoice Verification (MIRO) and FI document

Dear all can you please help to solve this issue?
We would like to have the same number range for invoice verification and for financial document, what we have to do?
Regards
Marco

Please follow the steps as below
Step 1. Maintain FI document number range. Use transaction OMR4 and go to Number range for document types in FI. Select the company code for which you want to create the new number range interval and click on the change interval button. Insert a new document number range by clicking on the insert interval button on top of the screen.for example, I created number range interval 52 with the document numbers 5200000000 5299999999. Don't forget to set the external number range check box (Ext).
Step 2. Assign FI number range to FI document types. The second step is to assign the number range created in step 1 to the FI document type for invoices. Again use transaction OMR4 and go to Document type. Double-click on the document type, which you are using for LIV invoices. In my example, I used the SAP standard document type RE. In the number range field, assign the new number range interval 52
Step 3. Maintain MM document number ranges. Use transaction OMRJ and click on change interval button. Insert a new document number range by clicking on the insert button at the top of the screen. For MM documents, I created number range interval 52 with the document numbers 5200000000 5299999999. For the internal number range assignment, do not set the external number range check box (Ext).
Step 4. Update MM number range assignment. The last step is to assign the MM number range to your MM transaction via IMG menu path Materials Management>Logistics Invoice Verification>Incoming Invoice>Number Assignment>Maintain Number Assignments for Logistic Documents>Transaction Assign Number ranges. Two transactions are available. LIV contains the following two internal transactions that are used for the MM document number determination:
RD: manual invoice entry (MIRO)
RS: cancel, reverse invoice (MR8M), evaluated receipt settlement (MRRL), EDI invoice receipt, invoicing plan (MRIS), and revaluation (MRNB).
You need to update the number range interval for transaction RD.
hope now that things r clear
reward accordingly

System Calculating HCess twise while posting MM Invoice through MIRO

Dear Gurus,
System calcuating Highter Cess twise while posting MM invoice through MIRO.
Please guide where could be problem... Pls provide standard steps need to verfy one by one to analysis the same.
Regards,
Venkat

Dear Santosh,
We are using TAXINN-Condition based method. We are maintaing JSEP as HCESs condition and JHX1 as Off-setting conditiong type.
But system calcuating condition value against both in IV........
Regards,
Venkat

Error when entering incoming invoice in MIRO

Hello gurus,
we are trying to enter invoice in MIRO with PO reference for planned delivery costs. After I enter the PO number, I have the item downloaded with certain amount, To balance the document I enter in G/L accounts tab account the account number 1243300020, add the amount and tax and once I do this and want to simulate, I get the error:
Account 2454100030 EC10 is blocked for posting
which I do not get, as the account 2454100030 has not been entered anywhere...is there any assignemt for tax amouts or something?
thanks for letting me know what could be the reason of this
regards
Hana

Dear,
Use transaction FS00, enter GL 2454100030 account and click on Lock icon and unblock the same....if you want to check where this GL 2454100030 has been assigned then check table T030 and T030K in transaction SE16.
Regards,
Chintan Joshi

How to find out the changes made during posting the invoice in MIRO

Hi Friends,
During posting an invoice in MIRO somebody changed the invoicing party which differs from the vendor which was in PO. Is there any way out to see the record of changes, like who has changed & at what time.
Replies will be highly appreciated.
Regards
Rutabhadra Panda

Hi Rutabhadra
you can see the Document change in the Table CDHDR
t code : SE 16
table CDHDR
object : IncomingInvoice
execute this
see the change time and name
Regards
Vikrant

How to get the pop up of Down Payment Clearing while posting an Invoice using MIRO tcode

Hi,
I am having a requirement where I need to display the Down Payment Clearing pop up.
Scenario: While posting an Invoice, user have to check whether he had done any downpayment for the Purchase Order, if so, then there will be a Information displayed saying "Down Payment for Purchase Order xxxxxxxxx exist". Then user has to click the Down Payment Clearing button in the header level, then a pop up window is displayed.
But now my requirement is when the Information Message is displayed, if I click enter button to goto next screen, that time itself I need to display the Down Payment Clearing pop window, rather than clicking the down payment clearing button in the header level.
Kindly suggest any user exit or badi to do this customization
Thanks & Regards,
Karthikeyan G.

Hi,
At the time of entering the invoice from MIRO/FB60, system gives a pop-up for downpayment clearing. If you go in the help, the following thing is mentioned in the part Procedure.
Procedure
Check whether a transfer posting or a clearing of special G/L transactions (for example down payments) is necessary after you have posted the present document.
Here SAP has clearly mentioned that we can do the clearing after posting of this document.
Regards,
Amit
Edited by: amit kulkarni on Nov 13, 2009 2:53 PM

Third Party Sales Order - Complete Upon Partial Invoicing

We have a third party sales order that creates a purchase order (No delivery is used). If there are 2 lines items and we completely invoice one of the line items and partially invoice the other, the sales order is showing in a complete status.
We are using an item category of: TAS
Billing Type: F2
Note: Completion rule on TAS is blank.
Does anyone have an idea of why the order would be going to a complete status when it is not fully invoiced?
Thanks,
Mark

Shiva,
Perfect answer. Thanks !
Mark

How to stop Invoice Verification for Dulicate Invoice in MIRO.

Dear friends,
In configuration related to duplicate invoice in MIRO, we have selected "Reference Doc. Number". Also in Vendor Master we have ticked the "Check Duplicate Invoice".
Inspite of this system is giving only warning message at the time of MIRO against Duplicate Invoice. I want to convert it as error message.
How to do this?
Regards
Siva

Message number M8 108
The category of this message can be changed in Customizing for Invoice
Verification.
IMG > MM > LIV > Define Attributes of System Messages
This means that you can receive a message as an error
message even though it is defined as a warning message in the standard
system.

Partial Invoice in MIRO

Similar Messages

Maybe you are looking for