Partition Manager is creating more than double number of partitions .

Dear Team,
I am facing a very weird scenario .
For one of my product , one of the section is the Partition Manager executing for the Tables . Now I am facing a problem and it is really getting difficult for me to get to the root cause and thus posting in the forum ...
I am having two Linux systems , in one of the system, installation of the product goes fine , and partition manager is doing the partition as intended .
In another Linux lab , ( with some extra application installed ) , the same product is failing to install , and the problem is Partition Manager is doing the partition more than double as compared to first Lab and because of this it ends up using all the space in the system .
My Concern is do we have any global setting for this Partition Manager in the Oracle Database , and because of this I am seeing the difference in this 2 labs ..I will be really thankful for any of the inputs and suggestion ...
With Very Best Regards,
Shail...
Edited by: 999908 on 13 Apr, 2013 9:27 PM

Hello Justin,
First of all thanks a lot for your patience ... :) , in looking into my problem ..
But I guess it is using Oracle partitioning Concept only...I dont think , my product is using the third party partition tool ( I will recheck this once to confirm )
What I understand is that , if for any table the number of partitions is almost thrice in one system as compared to other , then it will end up consuming more space for the table in the system where it is creating more number of partitions ...
I guess memory usage for any table also depends on the number of partitions ( Please do correct me if I am wrong here ) , if more number of partitions are there then more memory will be consumed , I guess..With Very Best Regards,
Shail

Similar Messages

Creating more than one serial number for a material upon Goods Receipt

I am trying to configure the system to create more than one serial number automatically for a material and have the equipment record created at the same time with the same number as the serial number. For example using MB1C, receiving a material for a quantity of 2, the Maintain Serial number pop up box appears, selecting the 'Create serial number automatically' , I receive an error message ' Number of numbers to be assigned must be 1
    Message no. NR030
Can someone help me with this issue.

I have tried MIGO and get the same error. The Plant data/stor 2. tab of the material master for this particular material is set as follows
                                                                                Serial no. profile   NS01 SerLevel   1 Keep equipment number and serial number synchronous.
Would there be configuration missing?

JSR-75 PIM API creating Contact with more than one Number (Phone,Fax ...)

Hi everybody
I try to create a contact with more than one Phonenumber using the method contact.addString(...) .
Contact with one single number is no Problem but contacts with more than one Number are ignored and are not stored to the phonebook. I try to add the Numbers using a for -loop. Is there an other way to solve this Problem?
please Help.
Thank You.

Wonder if you have made any progress - if so,
could you share ?

Library more than doubles in size when importing form iPhoto

I imported my iPhoto Library into Aperture using the standard import setting, only to find that the size of the Aperture Library is about 90GB whereas the original iPhoto library was a mere 38GB. Is there anything I can do to keep the Aperture library at about the same size as my original iPhoto library? More than doubling in size is just too much!

Hi Léonie, thanks again for the detailed advise! I checked both my iPhoto Library and my Aperture Library and they are almost idendical as to the number of photos they show (22.424 photos in iPhoto, 22.884 photos in Aperture - and that's due to some new photos I have imported into Aperture since I imported my iPhoto Library to Aperture). Also, when following your advise to disply photos sorted by date, I only find very few duplicates in my Aperture Library (probably just a few dozen).
Searching for stray images, I only get 104 photos listed that seem to be not properly imported into iPhoto.
What's strange, though, I kept the folder-structure that I had created for my photos before I even started using iPhoto and where I had always put copies of the photos that I had imported into iPhoto Library (call it paranoia or whatever, but I neve fully trusted iPhoto that it would hold all my valuable photos safe ...). So there I have originals of all my photos and this folder is a full 70GB of data - as opposed to the 38GB of my iPhoto Library which has almost the exact number of photos as my folder-structure does.
So I essentially have the following:
- iPhoto Library with 22.424 photos and 38GB
- Aperture Library with 22.884 photos and 90GB
- A folder-structure where I hold duplicates of all my photos outside of iPhoto and Aperture (and NO, I don not use iPhoto nor Aperture as referenced databases) with 22.512 objects and a total of 69,44GB of data.
Anything else you could think of? I'm lost the more I dive into this ...
Rgds, Berthold

PROCEDURE PROBLEM - Exact Fetch Returns More Than Requested Number of Rows

Here is my procedure:
CREATE OR REPLACE PROCEDURE question4
( cust_first IN customer.custfirstname%TYPE,
   cust_last IN customer.custlastname%TYPE,
   customer_no OUT customer.customerSsn%TYPE,
   cust_address OUT customer.address%TYPE,
   loanID OUT loan.loanNo%TYPE,
   application_date OUT loan.appdate%TYPE,
   remaining_payments OUT loan.remainingpaymentsdue%TYPE,
   loan_amount OUT loan.loanamount%TYPE,
   loan_term OUT loan.loanterm%TYPE,
   interest_rate OUT loan.interestrate%TYPE,
   monthly_payment OUT loan.monthlypayment%TYPE)
   AS
BEGIN
SELECT customerssn, address INTO customer_no, cust_address FROM CUSTOMER WHERE custfirstname= cust_first AND custlastname = cust_last;
SELECT loanno, remainingpaymentsdue, loanamount, loanterm, interestrate, monthlypayment, appdate INTO loanID, remaining_payments, loan_amount, loan_term, interest_rate, monthly_payment, application_date FROM LOAN WHERE customerSsn = customer_no;
EXCEPTION
    WHEN OTHERS
    THEN
    NULL;
END;Here is the anonymous block showing the use of my procedure.
SET SERVEROUTPUT ON
DECLARE
customer_number customer.customerSsn%TYPE := NULL;
customer_address customer.address%TYPE := NULL;
loan_number loan.loanNo%TYPE := NULL;
app_date loan.appdate%TYPE := NULL;
rem_payment loan.remainingpaymentsdue%TYPE := NULL;
l_amount loan.loanamount%TYPE := NULL;
l_term loan.loanterm%TYPE := NULL;
i_rate loan.interestrate%TYPE := NULL;
m_payment loan.monthlypayment%TYPE := NULL;
view_customerSSN NUMBER;
view_address VARCHAR2(50);
view_loanID NUMBER;
view_date DATE;
view_remaining_payment NUMBER;
view_loan_amount NUMBER(8,2);
view_loan_term VARCHAR2(10);
view_interest_rate FLOAT(20);
view_monthly_payment NUMBER(8,2);
BEGIN
question4 ('Tim', 'Thompson', customer_number, customer_address, loan_number, app_date, rem_payment, l_amount, l_term, i_rate, m_payment);
IF (customer_number IS NULL OR customer_address IS NULL OR loan_number IS NULL OR app_date IS NULL
OR rem_payment IS NULL OR l_amount IS NULL OR l_term IS NULL OR i_rate IS NULL OR m_payment IS NULL) THEN
     DBMS_OUTPUT.PUT_LINE ('NULL VALUE');
ELSE
    view_customerSSN := customer_number;
    view_address := customer_address;
    view_loanID := loan_number;
    view_date := app_date;
    view_remaining_payment := rem_payment;
    view_loan_amount := l_amount;
    view_loan_term := l_term;
    view_interest_rate := i_rate;
    view_monthly_payment := m_payment;
    DBMS_OUTPUT.PUT_LINE ('CUSTOMER NO : ' || view_customerSSN);
    DBMS_OUTPUT.PUT_LINE ('CUSTOMER ADDRESS : ' || view_address);
    DBMS_OUTPUT.PUT_LINE ('LOAN NO : ' || view_loanID);
    DBMS_OUTPUT.PUT_LINE ('LOAN APPLICATION DATE : ' || view_date);
    DBMS_OUTPUT.PUT_LINE ('REMAINING PAYMENTS : ' || view_remaining_payment);
    DBMS_OUTPUT.PUT_LINE ('LOAN AMOUNT : ' || view_loan_amount);
    DBMS_OUTPUT.PUT_LINE ('LOAN TERM : ' || view_loan_term);
    DBMS_OUTPUT.PUT_LINE ('INTEREST RATE : ' || view_interest_rate);
    DBMS_OUTPUT.PUT_LINE ('MONTHLY PAYMENT : ' || view_monthly_payment);
END IF;
END;
/Error Message:
Error report:
ORA-06550: line 21, column 3:
PLS-00306: wrong number or types of arguments in call to 'QUESTION4'
ORA-06550: line 21, column 3:
PL/SQL: Statement ignored
*06550. 00000 - "line %s, column %s:\n%s"*
**Cause: Usually a PL/SQL compilation error.*
**Action:*
What is the problem here? Could you anyone help me?
Thanks for your help from now on.
Have a beautiful day...
Edited by: RobertPires on May 1, 2011 5:13 PM
Edited by: RobertPires on May 1, 2011 8:19 PM

Thanks for your help, Sir. As you see it as above, I fixed the order of parameters, but since I would like to display multiple records, my procedure did not work properly and I got this error message:
Error report:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "S4048958.QUESTION4", line 20
ORA-06512: at line 21
*01422. 00000 - "exact fetch returns more than requested number of rows"*
**Cause: The number specified in exact fetch is less than the rows returned.*
**Action: Rewrite the query or change number of rows requested*
I guess I need to create a cursor in my procedure, but I dunno how. Could you give me some suggestion for this please?
Thanks again...

Can i create more than one db in a machine?

can i use "create database" to create more than one db in a single machine?

I understand what you're saying and it's sound advice. When you said crash I took it as meaning at the database level
and not the server level. As I said before, one database crashing will not effect another on the same server. If the server
crashes both databases will crash too. I think we both agree on that.
then you will have more than one job in hand.... And to get things up-and-running, will take that much longer.....True, but there's other things to consider in the real world. For example one of our servers contains our development/test
database and our production database. I hate to sound like management here(which I'm not) but why should we buy another
server for 5-8 people to use for development/testing? The cost of a few developers not working for a while and DBA restoring
the database in the rare case of a server crash is less expensive than buying a second server. Maybe if we had more
developers for this system a second server would be justified. Another reason for not having a second server may be that some
people can't afford a second server.
So can you install more than one database on a server? Yes
Is it better to have one database per server? Yes
Is it always justified to have one database on a server? No

ORA-01422 exact fetch returns more than requested number of rows on invoice

Hello developer,
Current I m facing problem ORA-01422 exact fetch returns more than requested number of rows in Invoce Standard form when we select PO_Default invoice type for some specific PO Number not for all. I m not able to handle the error bcoz im new in oracle apps. it's urgent for user requirement. Plz guide me how to take approch to handle the situation.........
select Po_Default invoice type=>enter po number=>press ok button=>got error ORA-01422
I got query from POST_QUERY TRIGEER like
function get_po_number (l_po_number varchar2,l_vendor_id OUT number) return number is
l_po_header_id number;
--Bug fix:1096002
--Removed the function call UPPER from the WHERE clause so that the query
--becomes case sensitive.
-- BUG 2519682 vendor_id added in the Select statement and futher in the fetch statement
cursor po_number_cursor is
SELECT po_header_id,vendor_id
FROM po_headers
WHERE type_lookup_code IN ('STANDARD', 'BLANKET', 'PLANNED')
AND approved_flag = 'Y'
AND segment1 = l_po_number
-- Bug 2289727. Enhanced Matching Controls to Finally Closed POs
AND (NVL(closed_code, 'X') <> 'FINALLY CLOSED'
OR :parameter.show_final_closed_po_flag = 'Y')
AND PCARD_ID IS NULL; --bug4627502
/* Commented out since this is not relevant even if executed.
AND (segment1 LIKE SUBSTR(l_po_number, 1, 2) || '%' OR
segment1 LIKE SUBSTR(l_po_number, 1, 1) ||
SUBSTR(l_po_number, 2, 1) || '%' OR
segment1 LIKE SUBSTR(l_po_number, 1, 1) ||
SUBSTR(l_po_number, 2, 1) || '%' OR
segment1 LIKE SUBSTR(l_po_number, 1, 2) || '%' );
begin
open po_number_cursor;
fetch po_number_cursor INTO l_po_header_id,l_vendor_id;
close po_number_cursor;
return(l_po_header_id);
end get_po_number;
plz help me how to resolved this issue it's urgent.
thanks in advance.........

This bug is documented in the following note on metalink.oracle.com
APXINWKB - Creating PO Default Invoice Errors with ORA-01422 Exact Fetch Returns More Than Requested Number Of Rows [ID 946578.1]
The solution is to apply patch 8765847.
Hope this answers your question,
Sandeep Gandhi

SAP F&R - Creating More Than One Ignore DIF

Hello there,
We're running F&R 5.1, we have one internal Ignore DIF in the system and we want to create another external Ignore DIF. But when we try to create the second Ignore DIF, the system error message shows:
"There must be only one DIF type of I"
There's no way to skip this message, so isn't it possible to create more than one Ignore DIF?
Thanks,
Yang

Hello Yang,
the system allows you to generate internal DIF occurences of DIF type Ignore from both internal and external system.
Please consider that the Internal No. and External No. only refers to the way how to define the DIF occurrence ID. Internally means the system is creating it automatically. External means a user has to type it in.
See also the customizing point about Number Ranges For DIF Occurrences (tcode /FRE/DIFNR).
Kind regards, Rainer

In smart form, can i create more than one main window,

In smart form, can i create more than one main window,
if no, then why?

Hi,
As for main window a page can have only one.
You may have number of Variable windows
Main window can only be one. One it can be copied to next page.
but secondary window as many as u want.
Reward if it helps..
Regards,
Omkar.

Exact fetch returns more than requested number of rows oracle error ; unable to find where exactly throwing error in the below code.

hi i am receiving "exact fetch returns more than requested number of rows oracle error". but i am not able to locate the error in the below code. Any help would be appreciated!!!
CREATE OR REPLACE PROCEDURE load_scene_collection_item (
--pdname                                  VARCHAR2,
-- LOCATION TO ADD/CHANGE below!!!
pITEM_TYPE_ID                      INTEGER,
pSCENE_COLLECTION_ID        INTEGER,
pCOLLECTION_ITEM_NAME     VARCHAR2,
pCOLLECTION_ITEM_DESC      VARCHAR2,
pDEFAULT_COORD_X      NUMBER,
pDEFAULT_COORD_Y      NUMBER,
pDEFAULT_COORD_Z      NUMBER,
pDEFAULT_WIDTH            NUMBER,
pDEFAULT_HEIGHT            NUMBER,
pDEFAULT_ROTATION      INTEGER,
pDEFAULT_ALPHA            INTEGER,
pfname                                 VARCHAR2)    IS
src_file BFILE;
dst_file BLOB;
lgh_file BINARY_INTEGER;
BEGIN
src_file := bfilename('BUSINESSBLOBSIMAGES', pfname);
-- insert a NULL record to lock
Insert into SCENE_COLLECTION_ITEM
   ( ITEM_TYPE_ID,
   SCENE_COLLECTION_ID,
   COLLECTION_ITEM_NAME,
   COLLECTION_ITEM_DESC,
    COLLECTION_ITEM_IMAGE,
   DEFAULT_COORD_X,
   DEFAULT_COORD_Y,
   DEFAULT_COORD_Z,
   DEFAULT_WIDTH,
   DEFAULT_HEIGHT,
   DEFAULT_ROTATION,
   DEFAULT_ALPHA,
    CREATE_USER,
    CREATE_DATE)
Values    ( pITEM_TYPE_ID, pSCENE_COLLECTION_ID, pCOLLECTION_ITEM_NAME, pCOLLECTION_ITEM_DESC, EMPTY_BLOB(),
   pDEFAULT_COORD_X,
   pDEFAULT_COORD_Y,
   pDEFAULT_COORD_Z,
   pDEFAULT_WIDTH,
   pDEFAULT_HEIGHT,
   pDEFAULT_ROTATION,
   pDEFAULT_ALPHA,
sys_context('USERENV', 'OS_USER'),
sys_extract_utc(systimestamp))
RETURNING COLLECTION_ITEM_IMAGE INTO dst_file;
-- LOCATIONs(2) TO ADD/CHANGE above!!!
-- lock record
SELECT COLLECTION_ITEM_IMAGE
INTO dst_file
FROM SCENE_COLLECTION_ITEM
WHERE ITEM_TYPE_ID     = pITEM_TYPE_ID
AND SCENE_COLLECTION_ID = pSCENE_COLLECTION_ID
AND COLLECTION_ITEM_NAME= pCOLLECTION_ITEM_NAME
AND COLLECTION_ITEM_DESC= pCOLLECTION_ITEM_DESC
AND    pDEFAULT_COORD_X = DEFAULT_COORD_X
AND   pDEFAULT_COORD_Y = DEFAULT_COORD_Y
AND   pDEFAULT_COORD_Z = DEFAULT_COORD_Z
AND   pDEFAULT_WIDTH    = DEFAULT_WIDTH
AND   pDEFAULT_HEIGHT   = DEFAULT_HEIGHT
AND   pDEFAULT_ROTATION = DEFAULT_ROTATION
AND   pDEFAULT_ALPHA    = DEFAULT_ALPHA
FOR UPDATE;
-- LOCATION TO ADD/CHANGE above!!!
-- open the file
dbms_lob.fileopen(src_file, dbms_lob.file_readonly);
-- determine length
lgh_file := dbms_lob.getlength(src_file);
-- read the file
dbms_lob.loadfromfile(dst_file, src_file, lgh_file);
-- update the blob field
UPDATE SCENE_COLLECTION_ITEM
SET COLLECTION_ITEM_IMAGE = dst_file
WHERE ITEM_TYPE_ID     = pITEM_TYPE_ID
AND SCENE_COLLECTION_ID = pSCENE_COLLECTION_ID
AND COLLECTION_ITEM_NAME= pCOLLECTION_ITEM_NAME
AND COLLECTION_ITEM_DESC= pCOLLECTION_ITEM_DESC
AND    pDEFAULT_COORD_X = DEFAULT_COORD_X
AND   pDEFAULT_COORD_Y = DEFAULT_COORD_Y
AND   pDEFAULT_COORD_Z = DEFAULT_COORD_Z
AND   pDEFAULT_WIDTH    = DEFAULT_WIDTH
AND   pDEFAULT_HEIGHT   = DEFAULT_HEIGHT
AND   pDEFAULT_ROTATION = DEFAULT_ROTATION
AND   pDEFAULT_ALPHA    = DEFAULT_ALPHA
-- LOCATION TO ADD/CHANGE above!!!
-- close file
dbms_lob.fileclose(src_file);
END load_scene_collection_item;
Thanks in advance!!!!

Hi PaulHorth,
Thanks for the quick reply.
Actually, i am getting error while updating the records.
below is the error message:
Error starting at line 1 in command:
exec load_scene_collection_item(3,15,'2 Lane 4way Stop','4 Way Stop Intersection with 2 lanes in each direction',0,0,0,400,517,0,1,'2 Lane 4way Stop.PNG');
Error report:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "DP_OWNER.LOAD_SCENE_COLLECTION_ITEM", line 55
ORA-06512: at line 1
01422. 00000 - "exact fetch returns more than requested number of rows"
*Cause:    The number specified in exact fetch is less than the rows returned.
*Action:   Rewrite the query or change number of rows requested

Creating more than one database user in oracle cloud

I hv created an adf application, in which there are 4 models. each model is connected to different database user, where SID is same for all user. These users have some number of tables, which are used as entity and view in model project in adf application. My query is:
I hv activated oracle cloud service for database and java. i want to deploy my adf application on cloud. so, how can i create more than one database user in cloud as i do in oracle db 11gr2? So that my all models will be connected to different database user in cloud.
Also, which service name should i use in model.jpx? I hv used mydb as service name on my local machine.
pls, help me to go ahead!!!!!!!!

Hi Ajaykumar,
To ensure you receive an accurate response to your query, I believe it would be best raised on the Oracle Java Cloud Service forum, here:
Oracle Java Cloud Service
Regards,
Hilary

NTLM Authentication : why is it not possible to create more than one NTLM realm ?

Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
Regards

Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

Can I create more than one bookmarks toolbar?

I'd like to set up several toolbars -- one for myself & my favorite sites .. one for my kids for their school needs ... and one for my husband. Can this be done? Will all three show up at the top?

pajagsfan wrote:
Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)
I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library. See if the files are elsewhere on your hard drive, or in the Recycle Bin. When you find them, get them back into your own library. Now you are ready to help your wife.
As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly. It is better to set her up with her own Windows user account. She can have her own iTunes library there.
Get a copy of your entire iTunes folder to start her off. She can delete stuff she doesn't want without messing you up.

Can i create more than one instance for single database?

HI
anybody can tell me how to create more than one instance for single database(without using RAC)?
thanks
Kalanidhi

Anandji,
I sometimes think differently. I also think like what this person is asking..(although I have installed and administering 5 different RAC databases)
The main doubt of mine is that we create multiple instances accessing the same storage area.
Anyway the controlfiles of all instances will have the same information except the instance_names and instance id's.
Hence I always think , why can't it be possible to to create another instance in the same system and point it to a controlfile which is copied from the other instance.
Why can't the same files be shared between the two instances in a same system ?
I know I am thinking a little bit confusing...
Anyway I need to test that also...
Mahesh.

How do I create more than one CSS style for text links?

Hello,
Just like the title says, I need help with creating more than one CSS text link style in Dreamweaver CS4. For instance, I want the navigation on the website I'm building to have a different text link style than a link in some part of the body copy. I've been playing with Dreamweaver for a while and can't find any way to do this. If it's even possible to do this, I would really appreciate any help.

Yes it is possible but as you have failed to provide a valid link to your site, I will tell you in general Terms:
1) First create a class or an ID to to your Nav bar;
2) Now style your navbar in such a way that these styles will only apply to your nav bar. To do this, you start your style by doing something like this:
ul#vavigation {.........}
ul#navigation a {.........}
ul#navigation a:hover {.........}
ul#navigation li {.........}
your html code might look like this:
<ul id="navigation">
<li><a href="#">Home</a></li>
etc etc .........................
</ul>
hth

Partition Manager is creating more than double number of partitions .

Similar Messages

Maybe you are looking for