Pass multiple varibles from flash to authorware

Hi there,
if I have a button in flash and want it to send a string of
varibales to authorware:
--example code--
///flash code///
on(release){
fscommand("varibles", "var1, var2, var3, var4")
///authorware code ///
EvalAssign(EventLastMatched[#command]^
":=EventLastMatched[#args]")
Trace(EventLastMatched[#args])
ActionFuntion(EventLastMatched[#args])
Quit()
In the authorware file I want to take that string and breakit
up in authorware and apply it to the ActionFuntion.
Please help.
Thanks daniel

So you have a string "var1, var2, var3, var4" that you want
to get each
element out of?
repeat with i:= 1 to LineCount(EventLastMatched[#args], ",")
lines
:=GetLine(EventLastMatched[#args], i, i, ",")
end repeat
Should put each element of the sting into a separate list
item in the
lines linear list. I am not really understanding what you
are tying to
do, so I have use a list here for demonstration purpose, but
maybe you
want to substitute the second line with :
ActionFunction(GetLine(EventLastMatched[#args], i, i, ","))
Which will call ActionFunction each time the loop runs and
send it the
next element from the string. In your case it will call..
ActionFunction("var1")
ActionFunction("var2")
ActionFunction("var3")
ActionFunction("var4")
Is that what you are trying to achieve?
Mark
deerowbear wrote:
> Sorry I misunderstood. When I
Trace(EventLastMatched[#args]) in authorware I
> get var1, var2, var3, var4. The function calls an
external dll that pass those
> variables off and a ActionFunction to a dll file.
>
> thanks daniel
>
>
>
>
Authorware Media Synchronization Command:
www.authorwarextras.co.uk --> Commands
Media Synchronization made easy !
EuroTAAC eLearning 2007
www.eurotaac.com
www.AuthorwareXtras.co.uk
www.freelists.org/list/flashelearning

Similar Messages

How to pass multiple values from master to child report

Hello,
How would I pass multiple prompts from the master to child report? So for example, say I want to pass a 'Country' value along with a 'City' value
Would it be?
="<a href=\"../../opendoc/openDocument.jsp?iDocID=ASQlgCemIOlEid1HHUlzyPs&sDocName=DocTest&sIDType=CUID&sType=wid&sWindow=Same&lsSCountry="+[Country]+"&lsSCity="+[City]+"\</a>"
Thanks,
Carter

Carter,
what is the syntax for this?
It is exactly how you have posted in your original note.
"&lsSCountry="+[Country]+"&lsSCity="[City]
This will work providing the target report has a prompt called "Country" and another prompt called "City". Note that your prompt and what you pass between the &lsS and the equal (=) must match exactly, otherwise OpenDocument will not communicate the prompt title to InfoView properly and InfoView will stop and execute the prompt to get the info it needs before running the report. Have you tried what you've posted originally to see if it executes without a problem?
Thanks,
John

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

LoadVars-using send to pass a variable from flash to php

For the life of me, I've tried everything:
I've researched LoadVars on Adobe forum, used David Powers'
books, googled 'flash to php', LoadVars, etc. and tried
sendAndLoad, send, and using $_POST, $_GET, $_REQUEST.
$HTTP_POSTVARS but I keep getting this same error. any advice
please?
I have a Unix server running Apache/PHP 4 - LoadVars worked
to load name-value pairs into an array -see thread)
My goal with this simple app is to prototype being able to
pass a variable from flash to a variable in php.
Parse error: syntax error, unexpected T_VARIABLE in
flash_to_SQL.php on line 5
Actionscript 2.0 code:
var c :LoadVars = new LoadVars();
c.testing = "123FOUR";
c.send ("
http://127.0.0.1/flash_to_SQL.php","_self","POST");
php code: (I also tried $_POST, $_GET, $_REQUEST.
$HTTP_POSTVARS)
<?php
//mysql 4.1.2, php 4 , NO mysqli
ecbo $_REQUEST ['testing'];
/?>

var formData:LoadVars = new LoadVars();
formData.fname = "Name";
formData.send("
http://www.website.com/flash_php.php",
formData, "POST");
<?php
$name = $_POST['fname'];
echo $name;
?>

Passing multiple paremeters from report through WESubmitLink or WEOpenInTargetLink

<p>Hello,</p><p>I am trying to pass multiple parameters from one report to another through the WEOpenInTargetLink and WESubmitLink formulas without having the user prompted.</p><p>I can do this using conventional CR methods with change subreport links by simply passing a static value with the same name as the parameter. This passes the parameters to the subreport without prompting. I would like to do the same with the aforementioned formulas.</p><p>is this possible? if so, how? I cannot find any method for doing this in the docs or online.</p><p>Thanks. </p><p> </p>

<p>hello, this is indeed possible and one of the main uses of webelements.</p><p>in your case you do not want to use WEOpenInTargetLink as this function is specifically designed for a named browser window or iframe. </p><p>when you are targeting another report, use the WETargetPath function that is in the main webelements folder...placed there as it is a key function to pass values back and forth.</p><p>have a look at the Simple Example report that is in the webelements download. the one thing you would change is the target report though so that the formula containing the submit button would look something like</p><p>stringvar path:= WETargetPath ("rpt", "Name", "insert your target report name", "");<br />WESubmitButton ("Update", path, "");</p><p>jamie</p>

Passing Multiple rows from one external webpart list to another

Hi Folks,
I have almost spent 1 week looking into this without any success. I have an external list "List A" (in a webpart) with one of the columns as "State".
Another external list "List B" (in a webpart ) has state and user as columns. In some case I want to pass 1 state and in another I want to pass multiple state. Passing one state from List A to List B works fine. But Multiple state does
not work because the webpart list has the property "Send First row to connected web parts when page loads". If I disable this option then the web part does not pass anything. Is there a way to pass multiple rows from one Webpart
external list to other?

http://www.sharepointanalysthq.com/2010/07/bcs-external-list-limitations/
No Lookups
Unfortunatly the only thing that you can do a look up on in an external list is on the ID column, anything else and you are out of luck.
http://social.technet.microsoft.com/Forums/en-US/615771a0-ba78-4e38-9e2d-ded0204173ba/external-list-referenced-as-sharepoint-lookup?forum=sharepointgeneralprevious
Try below webpart. it should help
http://www.sparqube.com/SharePoint-Lookup-Column/
If this helped you resolve your issue, please mark it Answered

Passing Multiple Values from Multi Select

Hi,
My requirement is simple. I have created a simple Multi Select Option in parameter form and i want to send multiple selected values from the multi select option (in parameter form) to reports.
eg:
I want to send multiple countries code as input .........'US', 'CA', 'IND', 'UK'
Can i do it in Oracle 6i reports, Thanks in Advance.
Regards,
Asgar

Hi Thanks Again,
For such a nice response. I got the Lexical Where condition properly running but still getting problems in catching the multiple values to be passed from form. just i will give u an insight of wat i have done:
SQL:
SELECT ALL FROM EMPLOYEES &cond_1* -- Working FIne
in my Html Parameter Form i have an Multi Select component (the Problem is here) it is not passing more than i value from the form once i am accessing it from web or running it in paper report. In paper report layout it is not allowing me to select more than one value. but in HTML it is allowing to select multiple values but at the server end (After Parameter Form Trigger) it is giving a single value not multiple values.
In PL/SQL when i checking the length of country_id i m getting it as one.
Here is my SQL code
srw.message(10, LENGTH(:country_id_1));
:cond_1 := 'where country_id = '''|| :country_id_1 ||'''';
This is passing the condition properly to SQL but only with single value but i want to pass multiple values
I am struck in this+_
WHERE CONTRY_COLUMN IN ('USA','UAE') -- This variable you have to pass from you form...
Here as you said you gave multiple selection in your parameter form to generate report. So before generation report just prepare variable like this as it is bold above.
and pass parameter through your runtime form to the report as you pass the normal parameter...liket this i gave you example...
ADD_PARAMETER(PARAMETER_LIST_NAME,'P_CONT_PARAM',TEXT_PARAMETER,vString);
Sorry for troubling you for a small thing but please help me to solve this issue.
Thanks Again............
Asgar.

Passing Multiple Values from a worksheet to PL/SQL function.

Hi All,
Is there any way to pass multiple values selected in a worksheet to a PL/SQL function ?
I will try to explain the scenario:
We have a crosstab report that showing all the customer details, deposit sum of a customer in each date in a date range selected. With the customer details we are showing the Rank of a customer based on the deposit in the latest date selected. Filtering is based on the rank, ie Top50 or Top60 etc.( As I said rank is calculating based on the deposit in the latest date).This is working fine.
Now the new requirement is to : For example, in Top50 report, list all the customers, who were in the Top50 list, in any of the dates selected. We are able to display the daywise rank, but when giving a condition like daywiserank <= 50, the result becomes uncertain. Some blank lines, wrong amounts etc..
As a work around we tried to find out the rank in a PL/SQL function. But the issue there is : we have some multiple value parameters used in the worksheet.
Is there any way to pass multiple values selected in a worksheet to a PL/SQL function ?
Or any other work arounds for the scenario explained?
Reagrds,
Jeneesh

Hi Russ,
Thanks for the response.
Russ Proudman wrote:
1. I thought there was an analytical function similar to rank - or maybe an option of rank - that if there are duplicate records to have them all considered the same rank. So if you had 3 records all the same as rank=2 then a condition saying where rank=2 would return the 3 records. You could check into this.
We are already using DENSE_RANK. But the issue is the output contains incorrect null values nd repeated rows.
We got it solved as I explained in the previous post. But will that AGGREGATION MODE setting ( Which discoverer says - not recommended) have any issue? I mean side effects?
Russ Proudman wrote:
2. Another thought is that you can create a PL/SQL routine - that's called from a SQL function registered in Discoverer - where a table is created that does the first part of your query. Then a worksheet is created to use the data from that table. So, in essence, the table would have your top50 ranked customers. Then you can write any kind of worksheet against that table. However, DBAs are loath to allow tables - that they didn't create! - many times in a PROD environment.
Here also the same problem will occur: as the top 50 will depend upon the parameters. I cannot pass those parameters to PL/SQL Function.And storing the top50 ( itmay be top100 or to 150 also) for all combinations of the parameters is impossible
Russ Proudman wrote:
3. Finally, are you sure you're rank function is correct in that if you're getting blank lines, maybe the 'over' part is not considering all columns needed to determine the rank?
Yes the query we are using is correct. The output QUERY of discoverer gives correct results in Sqlplus.
Regards,
Jeneesh

Pass multiple rows from sp to calling prog

I have a stored procedure using cursor to get multiple rows from the db, how can I pass these rows to the calling prog? Is the out variable returns the last row only?
This is what I did:
Create or replace procedure mysp (
var1 in number,
var2 OUT number,
) as
Cursor mycor is
select * from emp;
begin
for cors in mycor loop
var2 :=cors.ename;
end;
Thanks
null

I think you need to do in similar way as follows:
CREATE OR REPLACE PACKAGE sp_dev_sel_all_devicesPKG AS
TYPE RT1 IS RECORD (
sp_dev_id tbl_device.dev_id%TYPE,
sp_dev_name tbl_device.dev_name%TYPE,
sp_err_code tbl_error_messages.erm_id%TYPE,
sp_err_msg tbl_error_messages.erm_msg%TYPE
TYPE RCT1 IS REF CURSOR RETURN RT1;
END;
sho err
CREATE OR REPLACE PROCEDURE sp_dev_sel_all_devices (
in_usr_id IN tbl_user.usr_id%TYPE,
in_session_id IN tbl_user.usr_curr_session_id%TYPE,
RC1 IN OUT sp_dev_sel_all_devicesPKG.RCT1
) AS
ls_err_hint tbl_error_log.erl_err_hint%TYPE := 'BEGINING';
ls_err_code tbl_error_messages.erm_id%TYPE;
ls_err_msg tbl_error_messages.erm_msg%TYPE;
BEGIN
ls_err_hint := 'Check the timeout status of the user';
sp_utr_chk_timeout(UPPER(in_usr_id), in_session_id, 'sp_dev_sel_all_devices', ls_err_code, ls_err_msg);
ls_err_hint := 'Getting all Devices from tbl_device';
OPEN RC1 FOR
SELECT dev_id,
dev_name,
ls_err_code err_code,
ls_err_msg err_msg
FROM tbl_device
ORDER BY dev_name;
RETURN;
END;
sho err
Hope this works
r@m@

Pass multiple rows from sp to the calling prog

I have a stored procedure using cursor to get multiple rows from the db, how can I pass these rows to the calling prog? Is the out variable returns the last row only?
This is what I did:
Create or replace procedure mysp (
var1 in number,
var2 OUT number,
) as
Cursor mycor is
select * from emp;
begin
for cors in mycor loop
var2 :=cors.ename;
end;
Thanks
null

George:
You can use CURSOR VARIABLE to pass this
data type among PL/SQL or Java:
create or replace package pkg_a
as
TYPE c_emp REF CURSOR;
PROCEDURE mysp (var1 IN NUMBER,
c_var2 OUT c_emp);
END package pkg_a;
CREATE OR REPLACE PACKAGE BODY pka_a
AS
PROCEDURE mysp (var1 IN NUMBER,
c_var2 OUT c_emp)
IS
BEGIN
OPEN c_var2
FOR
SELECT * FROM emp;
END mysp;
END pkg_a;

Passing multiple rows from one action to another

Hi,
I've build a Guided Procedure Process with two actions. Both actions call a Visual Composer Model (deployed as Flex).
The Processdesign is:
Process
---Block
Action 1
CO 1 as VC Model (Flex)
Action 2
CO 2 as VC Model (Flex)
From the first vc model I want to pass multiple rows (its a vc table) to the second vc model. Therefor I've group the out-going parameters from model 1 with the in-coming parameters from model 2 at the block-level.
Now, when I start my process I have two results in the table of vc model 1 and will pass them to model 2. But only one record (always the first) is shown at model 2.
Can you say me the reason for this? Have I configured the parameter-grouping false? Or isn't it possible to pass multiple rows at guided procedures?
I'm using Visual Composer 7.0 and Guided Procedures 7.0 technology.
Thanks in advance
Claudia

hi,
Do structure mapping to pass row values
Thanks
Gopal

Passing php varibles to flash

I'd like to pass a variable from php to flash....the first
example below shows what works .....the second example shows what
i'd like to do but can't for some unknown reason. I think example#2
is possible because i've seen similar code all over the internet.
something is just wrong and i can't figure it out. please help me
use a php variable as part of the url string.
example #1
<?php
echo "&valid=1&;
?>
flash output is 1
example#2
<?php
$filename = "hello";
echo "&valid=$filename";
?>
flash output is $filename'';

found the answer its
....echo"&valid=".$filename;....................the movie must
be played from and html page uploading the .swf onto the webserver
and testing it gives the output of $filename;.....but if i hit f12
and create an html page with a refrence to the .swf it works
great.....BTW i'm not saying your php doesn't work i just haven't
used it.

Method to pass multiple values from jsp

Hi All,
There are multiple rows in the jsp form with each having a unique id.
I want to update some fields in all the rows. Then pass all the data to the controller. From the controller all the data should go to the database one row at a time .How do i do this........
Any help would be appreciated
Thanks

You can make use of ArrayList
In CO
OAApplicationModlue am = pageContext.getApplicationModule(webBean);
ArrayList values = (ArrayList) am.invokeMethod("PassArray");In AM
public ArrayList PassArray
ArrayList values = new ArrayList();
values.add("value")
values.trimToSize();
return values;
}Thanks
AJ

How can i pass a varible from a page to another

Hello ,
if i have 2 pages for example
page1.php and page2.php
and i have a varible at page1.php "$x=10;"
and i want to pass it to page2.php to use it . How ???
bec. i am doing a site and a user enters his username and i
want to use that username at many pages .
Can someone please tell me an easy way to do that . thanks in
advance

A better way, without using SESSION variables, would be to
have one page
link to the next with something like this -
<a href="pagetwo.php?variable=<?php echo $x;
?>">Page two
Then on page 2 have -
<?php $x =
isset($_GET['variable'])?$_GET['variable']:FALSE; ?>
Now, the variable $x on page 2 contains the value of the
variable $x from
page 1.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ahmed30" <[email protected]> wrote in
message
news:g19l08$7k4$[email protected]..
> It works :D
>
> thanks very much ....

Passing Multiple values from jsp to servlet

Dear all,
I am trying to do a very simple thing. I need to pass names of all products that have been added to the cart.
Below is my jsp. Basically I am trying to make something very basic using ajax, and later actually build it.
heres my code with 2 questions... all I need to do is to pass the names of the products.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<HTML>
<HEAD>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
     pageEncoding="ISO-8859-1"%>
<META http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<META name="GENERATOR" content="IBM Software Development Platform">
<TITLE>ShowCart.jsp</TITLE>
</HEAD>
<script>
xhr = null
var flag = false;
var amount = 0;
function getData(url,divid,prodName){
          var as = "added"+divid // this is the divid
          if (document.getElementById(as)!=null)
               document.getElementById(as).innerHTML ="adding"
       if (window.XMLHttpRequest){
         xhr=new XMLHttpRequest()
       else if (window.ActiveXObject){
         xhr=new ActiveXObject("Microsoft.XMLHTTP")
       if (xhr){
          xhr.onreadystatechange=callback
         xhr.open("GET",url,true)
         xhr.send(null)
         setDivid(as);
         updateCart(divid,prodName);
       else{
         alert("XMLHTTP not supported")
function setDivid(as){
if(flag){
     document.getElementById(as     ).style.backgroundColor = "RED";
        document.getElementById(as).innerHTML = "item added";
function updateCart(divid,prodName){
amount += divid;
document.getElementById("amount").innerHTML = "price is "+amount;
udpateSubmitData(prodName);
function updateSubmitData(prodName){
var = document.getElementById("Hidden"+prodName).value;
//do I need to do something here to submit the data ? ------------------1
function callback(dd){
       // when finished
       if (xhr.readyState==4){
              // OK
              if (xhr.status==200){
             // process the result.
              flag = true;
       else{
              alert("error")
</script>
<BODY>
<P>Place content here.</P>
The products are :
<%
if(request.getAttribute("Products")!= null){
java.util.ArrayList list = new java.util.ArrayList();
list = (java.util.ArrayList)request.getAttribute("Products");
for(int i=0; i<list.size(); i++){
com.deere.sc.bean.ProductBean pb1 = new com.deere.sc.bean.ProductBean();
pb1 = (com.deere.sc.bean.ProductBean)list.get(i);;
%>
<table>
<td>
<% out.println(pb1.getProductName());
     out.println(pb1.getProductPrice());
     %> <td> <div id="added<%= i %>"> </div> </td>
<td>     <a href = "javaScript:getData('/SC/AddToCart?name=<%= pb1.getProductName() %>',<%= i %>,<%= pb1.getProductName() %>);"> add to cart</a> </td>
     <input type="hidden" id="Hidden<%= pb1.getProductName() %>" value ="<%= pb1.getProductName() %>">
     </td>
     <%
}//end for
}//end if
%>
</table>
Thank you for shopping at the looters .. heh ;)
Total amount of money in your cart is <div id ="amount"> </div>
     <a href = "/SC/CheckOut">Check out cart</a>

</BODY>
</HTML>Any help on tips for proceeding from here will be helpful.
thanks in advance

Dear all,
I am trying to do a very simple thing. I need to pass names of all products that have been added to the cart.
Below is my jsp. Basically I am trying to make something very basic using ajax, and later actually build it.
heres my code with 2 questions... all I need to do is to pass the names of the products.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<HTML>
<HEAD>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
     pageEncoding="ISO-8859-1"%>
<META http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<META name="GENERATOR" content="IBM Software Development Platform">
<TITLE>ShowCart.jsp</TITLE>
</HEAD>
<script>
xhr = null
var flag = false;
var amount = 0;
function getData(url,divid,prodName){
          var as = "added"+divid // this is the divid
          if (document.getElementById(as)!=null)
               document.getElementById(as).innerHTML ="adding"
       if (window.XMLHttpRequest){
         xhr=new XMLHttpRequest()
       else if (window.ActiveXObject){
         xhr=new ActiveXObject("Microsoft.XMLHTTP")
       if (xhr){
          xhr.onreadystatechange=callback
         xhr.open("GET",url,true)
         xhr.send(null)
         setDivid(as);
         updateCart(divid,prodName);
       else{
         alert("XMLHTTP not supported")
function setDivid(as){
if(flag){
     document.getElementById(as     ).style.backgroundColor = "RED";
        document.getElementById(as).innerHTML = "item added";
function updateCart(divid,prodName){
amount += divid;
document.getElementById("amount").innerHTML = "price is "+amount;
udpateSubmitData(prodName);
function updateSubmitData(prodName){
var = document.getElementById("Hidden"+prodName).value;
//do I need to do something here to submit the data ? ------------------1
function callback(dd){
       // when finished
       if (xhr.readyState==4){
              // OK
              if (xhr.status==200){
             // process the result.
              flag = true;
       else{
              alert("error")
</script>
<BODY>
<P>Place content here.</P>
The products are :
<%
if(request.getAttribute("Products")!= null){
java.util.ArrayList list = new java.util.ArrayList();
list = (java.util.ArrayList)request.getAttribute("Products");
for(int i=0; i<list.size(); i++){
com.deere.sc.bean.ProductBean pb1 = new com.deere.sc.bean.ProductBean();
pb1 = (com.deere.sc.bean.ProductBean)list.get(i);;
%>
<table>
<td>
<% out.println(pb1.getProductName());
     out.println(pb1.getProductPrice());
     %> <td> <div id="added<%= i %>"> </div> </td>
<td>     <a href = "javaScript:getData('/SC/AddToCart?name=<%= pb1.getProductName() %>',<%= i %>,<%= pb1.getProductName() %>);"> add to cart</a> </td>
     <input type="hidden" id="Hidden<%= pb1.getProductName() %>" value ="<%= pb1.getProductName() %>">
     </td>
     <%
}//end for
}//end if
%>
</table>
Thank you for shopping at the looters .. heh ;)
Total amount of money in your cart is <div id ="amount"> </div>
     <a href = "/SC/CheckOut">Check out cart</a>

</BODY>
</HTML>Any help on tips for proceeding from here will be helpful.
thanks in advance

Pass multiple varibles from flash to authorware

Similar Messages

Maybe you are looking for