Pass parameters to iView (VC Model) from Portal

Hello All,
In VC, we have a model that has a start point as input with few input parameters.
As per the WIKI note https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/passing%2bvalues%2bvia%2burl
We were able to make the VC model read the parameters from the URL. Once we got this working, we created a new page in Portal and we added the VC model as an iview to the page.
Is there a way i could add the parameters as a part of configuration of the page or the iview in the portal?
I would like to know if it's possible to pass the value of InputParameter to iView from portal ?
We tried setting the isolation of the iview to URL, to utilize the parameters property. But we are not able to figure out how to pass parameters from here
Any help would be highly appreciated!
THanks,
Naveen

I am using a scenario where a VC form on the front page of our portal sends values to a separate page where the search results are displayed. The url is made up of the PCD id and the neccessary parameters. The target page is displayed as a popup. This works fine. The url looks like this:
http://server:50000/irj/servlet/prt/portal/prteventname/Navigate/prtroot/pcd!3aportal_content!2fint.agra.f0000!2fint.agra.f0060!2fd0001!2fframeworkPages!2fint.agra.p0100!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=navurl%3A%2F%2F9c506d0cfa29ad6f8d27790117c4c622&_paramsXmlStr_=<Params><Row%20FSTNAME_M='henning'%20LASTNAME_M='strand'></Params>;
Does this describe a similar scenario as you want?
Henning Strand

Similar Messages

Pass Parameters to T.Code in the portal from aTransaction Iview.

Good Morning.
I published a T.code in the portal as a Transaction Iview. This work fine.
I want pass a parameter to this t.code and that the program ABAP can get this value .
I check a suggestion in the post following :
From Portal transaction iView
I did the steps , but this not work. I don't can get the value passed in the field Applications Parameters.
Attach screenshot with the steps that I did.
[Screenshot|http://www.freeimagehosting.net/uploads/3d4dd249ad.jpg]
I want know how can solve this issue?
Thank in advance.
Regards

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

Passing parameters in iviews

Hi all,
I want to know is there any way to pass parameters from one URLiview to another URLiview in the portal without coding in webdynpro java. Can we declare this parameters anywhere in the portal?
Thanks in advance,
Bhaskar.

Hi jitender,
Thank you for your reply. But, after i have created an URLiview in the portal, there is a property called 'Parameters to Pass from Page Request(for URL isolation )'. I suppose this is the property to be used to pass parameters to another iview. But i want to know how to access this parameter from second iview.
My requirement is how to pass a parameter(suppose a string) from iview1 to iview2 in poratal without using 'programming portal eventing' or EPCM in webdynpro java.

Passing Parameters to iView

Hello Experts,
I want to pass a simple parameter from one iView to another. How do i pass it using EPCM.doNavigate? my code in asp is
Response.Redirect("url to navigate" + "?ID=V")
Request.QueryString\["ID"\] == "V"
I do some validations based on this querystring.
I need an equivalent for this in portal. I skimmed through many earlier posts but din't get a proper solution. Could you plz help me out with the simplest possible way ASAP.
Regards,
Madhesh
Edited by: Madhesh P on Jan 7, 2008 5:21 AM

Hi Madesh,
You can use custom events for passing parameters from one iView to Other.
Or
If the parameters are to be used in more than one iView you can use session variables.
Regards,
Ashutosh

Passing Parameters to Bounded Task Flow from JSPX

Hi All,
1. Created a JSPX page using UIShell template. This page contains 4 UI Components (InputComboBoxListOfValues) in SingleObjectContextArea. Created a Managed Bean for this page and capture the selected value in ValueChangeListner and added the value to pageFlowScope.
2. Created Unbounded Task Flow, dragged the JSPX page.
3. Have a existing Bounded Task Flow with page fragments, it has MethodCall activity which is expecting inputParameter values from JSPX.
4. To call the Bounded Task Flow from Unbounded Task Flow (has JSPX page) created 2nd JSPX page using UIShell template.
5. Dragged the existing Bounded Task Flow into 2nd JSPX page, in context menu selected Region. This Region is created in SingleObjectContextArea of UIShell.
6. When dragged its asking about inputParameter mapping of Bound Task Flow.
7. Configured the inputParameter value which are coming from pageFlowScope.
8. Dragged the controlFlow from 1st JSPX to 2nd JSPX page to complete the Navigation.
9. When running the Unbounded Task Flow, it showing 1st JSPX with LOV.
10. Selected the values and clicked on Submit Action.
11. Its now showing 2nd JSPX which contains Bounded Task Flow.
12. But its displaying empty records table. (Note: I am passing parameters to MethodCall inputParameters as pageFlowScope, My DB has displaying records based on inputParameters when tested it from OrcleSQLDeveloper)
Could any body help me on this issue.
My Code Snippets of Data Binding of 2nd JSPX page which has Bound Task Flow as a regionModel.:
<taskFlow id="TaskFlow1"
              taskFlowId="/WEB-INF/oracle/apps/TaskFlow1.xml#TaskFlow1"
              activation="deferred"
              xmlns="http://xmlns.oracle.com/adf/controller/binding">
      <parameters>
        <parameter id="PartnerKeyType" value="#{pageFlowScope.PartnerKeyType}"/>
        <parameter id="PartnerKey1" value="#{pageFlowScope.PartnerKey1}"/>
        <parameter id="InteractionPartnerRole"
                   value="#{pageFlowScope.InteractionPartnerRole}"/>
        <parameter id="BusinessProcessName"
                   value="#{pageFlowScope.BusinessProcessName}"/>
      </parameters>

Hi
first of all Can you get the pageFlow scope variable in taskflow?which you are passing from jspx page?
if you are able to get the Lov value in Taskflow try refresh taskflow on changing the LOV.
you need to add input parameter type as boolean,change the parameter from false to true when the LOV value changed.
now use refreshifNeeded property in pagedef bindings file

How to pass parameters to concurrent program report from Forms Personalizn

Hi All,
I am trying to run a report from a menu entry in the AP Invoice entry form. For this I have done the necessary steps of creating the menu entry and am assigning the values for the 2 parameters to a global variable and then launching SRS form.
In SRS form created an action to assign the global variable value to work_order.parameters. I can invoke the SRS OK except that my 2 parameter values appear concatenated in the first parameter itself and are not getting assigned to each of them seperately.
my global variable assignment is as follows :
=${item.inv_sum_folder.vendor_name.value}||'.'||${item.inv_sum_folder.vendor_site_code.value}
and my work_order.parameters value assignment is as follows :
=select nvl(${global.kmg_invalid_po_gv.value}, ${item.work_order.parameters.value}) from dual
It passes parameters OK if i replace custom report with standard AP report. I also made my parameters to be free text (17 character value set) to not validate input, but still no joy.
Any ideas why this is not working ?
Thanks in advance.
Shankar

As Francois said in his answer:
e.g.:Form A call FORM B
In form A (Button's or menu's Trigger code)
DECLARE
param_list_id ParamList;
BEGIN
param_list_id := GET_PARAMETER_LIST('EMPNO');
IF NOT ID_NULL(param_list_id) THEN
DESTROY_PARAMETER_LIST(param_list_id);
END IF;
param_list_id := CREATE_PARAMETER_LIST('empno');
ADD_PARAMETER(param_list_id, 'EMPNO', TEXT_PARAMETER, EMPNO);
CALL_FORM ( 'FORM B.FMX',HIDE,DO_replace,NO_QUERY_ONLY,param_list_id);and in FORM B create a parameter EMPNO (e.g.: varchar2) in node tree(parameter) and at Form level (e.g. WHEN NEW FORM INSTANCE read parameter-
or you could create a GLOBAL variables
or, still,Global procedure in LIB
Regards

Passing parameters (range) to ABAP function from Crystal report

Hello experts,
Iu2019ve created an ABAP function which receives parameters from a Crystal report . It works very well with simple parameters.
In my crystal report I can see the fields with the prefix u201CI_u201D in the field explorer, and I can use this fields in my Function Modules perfectly.
The problem is to pass parameters like range or multiples values.
I would like to know how to put this parameters into the low and high values of the range and receive them in my Function Module in the ABAP layer.
Thanks in Advance,
Carlos Henrique Matos da Silva and Silvio Meurer - SAP BusinessObjects BI Team - Brazil.

I got the answer of this question under SAP Integration Kit
How to pass parameters to ABAP function in Crystal report

Passing parameters to a java portlet from pl/sql proc

hi !
I try to build a link with a pl/sql procedure to a portal page which contains a java portlet. this link should pass a non qualified parameter to the page ... I try to get this parameter doing so : pr.getParameter("myparam") but nothing's work ...
Can someone help me??
thanks

not exactly what you wanted but ingredients can be found at
- JPublisher's docuemntation (especially "Type Mapping Support Through PL/SQL Conversion Functions")
- http://otn.oracle.com/sample_code/tech/java/jsp/Oracle9iJSPSamples.html (Best Hotels PL/SQL Sample )
- http://otn.oracle.com/tech/xml/xdk_sample/xdksample_093001i.html
hope this helps
Kuassi
I have a Java Stored procedure which takes an instance of a different java object as its parameter.
I need to do this from a pl/sql package - can anyone point me to a sample etc (looked on the website but don't see one) ?
Andrew

Passing Parameters Transaction iView

Hi!
I have created a SAP transaction iView that calls the transaction MM03. I know that we can pass application parameters by defining them in the iView properties. On the SAP help website, its given in the syntax <Screen_field1>=<parameter1> and so on for all the parameters.
How do I find out the name of the screen field? For example, I want to pass the material number VPP27. So it should be, <Screen_field1>=VPP27. But how do know what the screen field is called? I tried giving in Material, but it doesnt work..
Anyone know a way out?
Sameer

You can position the cursor at the field within the transaction in R3, then use the F1 key (for help), followed by F9 (for technical help). You should see a pop-up showing the screen field names for the present field that the cursor is on.

Read Iview component profile from Portal Service

Is there any way this can be done?

We have a situation where we need to define application parameters that is to be accessed across different iviews and a portal service. These application parameters can be modified by content administrators if it's at an iview level. We are trying to see if this can be done without the use of system landscapes which is available only to System administrators.

Passing parameters to the SQL Report from a text box in jsp

Hi All,
I want to dynamically generate the SQL Server Reporting Services by passing the query parameter from the url like this :
"http://localhost/Reports/Pages/Report.aspx?ItemPath=%2fDashboardReports%2fHorse_Profile&rs:Command=Render&rs:HorseID=117415"
Where horseid id my parameter which is needed by report to generate the required data.
This query paramter value is picked from the text box on my jsp page.
But my problem is when i go to this url it says the message
"The 'HorseID' parameter is missing a value ".
I have done a lot of search on this topic. Everybody says that we can pass the values from the url like i am using. But still its not working.
Any body has any idea please give me some idea.
Regards.

If you receive a picture via email or text message in ios 7 and when you press the action icon to save the picture and you do not get the option to save to your camera roll. Press and hold on the the image and you will get an overlay pop up to save the image. I have no idea why some attachments don't have option in action menu to save in the camera roll but by experimentation and earned frustration I found the above to work in certain situations.
Be well and have fun and feel rewarded in your frustrations. For without challenges, life would be an utter bore.

Passing parameters dynamically to crystal report from oracle

Hi,
I have a Crystal Report that is based on an Oracle Stored Procedure. This was created using Crystal Reports XI R2 and it is published on a Infoview environment.
There are 2 parameteres in an Oracle Stored Procedure, of which one parameter is Region which contains values like AP,GJ,HP,MP,TN. The report run daily at scheduled time in infoview and the output of the report for each region is passed and stored in that particular region folder for easy access to enduser. The other parameter is a refcursor.
Now my issue is i want to add new region value like KA. As i am new to crystal reports i am unable to understand how to do this also if possible can any one send me liknk which explains the procedure how to run a report that is based on an Oracle Stored Procedure.
Thanks in advance.

Hello,
Typically when you create the report this way the Store Procedure will query the table for values and present those in a drop down list in the report Prompts when viewing. Or if it's not interactive then simply typing in 'KA" into the parameter UI should/could return data.
So it all depends on how you have this configured and how it was set up in the CMC when the report was scheduled. The BOE Administrator may have manually added the filter for each state or it's part of the report itself and other than updating the table field values is all that is required.
So it's not clear what role you play in the Admin group of BOE but it appears to be fairly simple to do. If you are not the Administrator find out who is and that person can explain it to you also.
I'll move this post to the Business Objects Enterprise Forum for someone there to give you specific details.
Thank you
Don

Passing parameters thru IVIEW

Dear gurus,
I have a requirement wherein I need to pass the logged in EP user Id to BW thru a BW Iview.We cannot use the LOGON Tickets method as there might be many customers who might need to access BW thru that Iview.We dont want to have a userid for each of them in the BW system.
Pls let me what is the way out.
We are on EP SP12.
Appreciate your help greatly.
Thanks.

Thanks Jyoti for your inputs.
As harsha has said it would be great to have a step-by-step.
In my case,based on the userid I need to perform some logic in BW ( i.e. different userids different logic)
(Is there a way to specify the EP userID dynamically/internally by specifying some variable/place holders )
Thanks again.
Message was edited by: Sap User 001
Message was edited by: Sap User 001

Passing Parameters to a JSP

Hello,
I have the following problem and would highly appreciate any ideas or suggestions...
I want to create an iView that contains contents of an external JSP. I have tried creating either a URL iView or an AppIntegrator iView that link to http://SomeServer:8080/Rental.jsp
Now my problem is passing custom parameters to this jsp. For example I would like the user to select what Color car he/she wants to rent from a drop down list. This list will be a custom property created in the portalapp.xml file and I will set this property to be cuztomizable by the user. If the user chooses "Red" then I would like the iView to refresh pointing to http://SomeServer:8080/Rental.jsp?color=red
I know how to define custom properties of an iView but I dont know how to set the URL of an iView based on the parameter chosen by the user.
Thanks,
Roaa

You can pass parameters between JSP's using Enterprise Portal Client Framework(EPCF). The following link could be useful to you.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/771fa290-0201-0010-3d93-865e66cc6d7e
Regards,
Vijai Mohan

How to pass parameters from GP to Portal-page or iView

Hello all,
I tried various things but I'm not succesfull in creating an callable object of type 'Portal-page or iView' which receives certain parameters.
Currently we open the portal page from within a WebDynpro. I pass a string "zaanum=909&zasnum=1" to the Portal-page. The parameters are received in the webDynpro-app.
Now I want to do this from within GP. I thought to create a CO of type 'portal-page or iview' and the parameters are given to that CO.
I expect the parameters to be received by the WebDynpro in the iView.
I tried:
- defining one parameter for CO of type string. At initiation time I fill this with "zaanum=909&zasnum=1" ==> Nothing received in iView/WebDynpro
- defining two parameters (technical names 'zaanum' and 'zasnum') for CO of type string. At initiation time I fill them with 909 and 1 ==> Nothing received
- defining two parameters (technical names 'zaanum' and 'zasnum') for CO of type integer. At initiation time I fill them with 909 and 1 ==> Nothing received
- defining two parameters (parameter names 'zaanum' and 'zasnum') for CO of type string. At initiation time I fill them with 909 and 1 ==> Nothing received
Any help is appreciated!
Maarten Rutten
Edited by: Maarten Rutten on Jan 9, 2008 8:36 PM
Edited by: Maarten Rutten on Jan 9, 2008 8:37 PM

Hi Ramien,
I have a similar problem. I need to pass values from webdynpro to jsp and vice versa. Kindly let me know how you solved this problem.
Thanks & regards,
Amrita

Pass parameters to iView (VC Model) from Portal

Similar Messages

Maybe you are looking for