Pass value from BO to report

Dear Experts,
I have created a method in my BO. Its of type report. I need to pass key field value of BO to the method (type:report) of my BO. Is there any way to do this or is there any FM that I can use in my report to read the key field of BO.
KR,
Bharath

Dear Narin,
Thanks for your reply. My code is as below.
REPORT ZTES_REP1.
INCLUDE <cntain>.
Data: object type swc_object VALUE 'BUS2091',
lv_key TYPE SWOTOBJID-OBJKEY.
SWC_GET_OBJECT_KEY object lv_lblni.
But I am not getting the key value of BO in my report. Can you please tell me how should I retrieve the BO key value in report.
KR,
Bharath

Similar Messages

How to pass value from the Z Report to the selection screen of the std rep

Dear Experts,
i have developed a report and the values are maintained only in internal table based on some condition. When I execute the report, for example MM60, there is a material number field for multiple selection.
the report should call the standard transaction and pass the values from the internal table to the multiple selection- material number of the standard transaction.
the standard transaction should never get executed automatically. Only the value should get passed from internal table to the standard t code. Please help.
regards,
Shankar

Hai
Go through the following Documents
SUBMIT rep.
Additions
1. ... LINE-SIZE col
2. ... LINE-COUNT lin
3. ... TO SAP-SPOOL
4. ... VIA SELECTION-SCREEN
5. ... AND RETURN
6. ... EXPORTING LIST TO MEMORY
7. ... USER user VIA JOB job NUMBER n
8. ... Various additions for parameter transfer to rep
9. ... USING SELECTION-SETS OF PROGRAM prog
Effect
Calls the report rep . Leaves the active program and starts the new report rep .
Addition 1
... LINE-SIZE col
Effect
Prints the report with the line width col .
Addition 2
... LINE-COUNT lin
Effect
Prints the report with lin lines (per page).
Addition 4
... VIA SELECTION-SCREEN
Effect
Displays the selection screen for the user. In this case, the selection screen is redisplayed after return from the report list display - the user's entries are retained.
Addition 5
... AND RETURN
Effect
Returns to the calling transaction or program after the called program has been executed. SUBMIT ... AND RETURN creates a new internal mode .
Addition 6
... EXPORTING LIST TO MEMORY
Effect
Does not display the output list of the called report, but saves it in SAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. You can read the saved list from SAP memory with the function module 'LIST_FROM_MEMORY' and then (for example) store it in the database with EXPORT . You can process this list further with the function modules 'WRITE_LIST' , 'DISPLAY_LIST' ... of the function group "SLST" .
Addition 7
... USER user VIA JOB job NUMBER n
Effect
Schedules the specified report in the job specified by the job name job and the job number n . The job runs under the user name user and you can omit the addition USER user . The assignment of the job number occurs via the function module JOB_OPEN (see also the documentation for the function modules JOB_CLOSE and JOB_SUBMIT . This addition can only be used with the addition ...AND RETURN .
Note
When scheduling a report with the SUBMIT ... VIA JOB job NUMBER n statement, you should always use the addition ...TO SAP-SPOOL to pass print and/or archive parameters. Otherwise, default values are used to generate the list and this disturbs operations in a production environment.
Addition 9
... USING SELECTION-SETS OF PROGRAM prog
Effect
Uses variants of the program prog when executing the program rep .
Note
Important
The programs prog and rep must have the same SELECT-OPTIONS and PARAMETER s. Otherwise, variants of the program prog may be destroyed.
Note
When using this addition, the specified variant vari of the program prog is taken in USING SELECTION-SET vari . On the other hand, all variant-related actions on the selection screen of rep (Get , Save as variant , Display , Delete ) refer to the variants of prog .
Example
SUBMIT REPORT01
VIA SELECTION-SCREEN
USING SELECTION-SET 'VARIANT1'
USING SELECTION-SETS OF PROGRAM 'REPORT00'
AND RETURN.
Effect
Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00 .
Note
Runtime errors
LOAD_PROGRAM_NOT_FOUND : The specified program was not found.
SUBMIT_WRONG_TYPE : The specified program is not a report.
SUBMIT_IMPORT_ONLY_PARAMETER : Only one value passed to a report parameter.
SUBMIT_WRONG_SIGN : Invalid value passed to a selection with the addition SIGN .
SUBMIT_IN_ITAB_ILL_STRUCTURE : Table passed to a selection with WITH sel IN itab had an unexpected structure.
Try with this Example
Data: listobject like abaplist occurs 1 with header line.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1 .
IF sy-subrc <> 0.
message ID '61' TYPE 'E' NUMBER '731'
with 'LIST_FROM_MEMORY'.
ENDIF.
Thanks & regards
Sreenivasulu P

Pass value from previous interactive report to create record form

Hi All,
I am an APEX newbie and have an APEX 3.2.1 application that is still being developed that is working reasonably well. The problem I am having is the following:
I have 3 interactive reports. These are defined on their respective tables, namely, clients, servers, and databases. By clicking on a client name, it shows the servers that are associated with that client. By then clicking on a server, it shows me the databases that are on that specific server. I am able to perform updates, deletes and inserts on all of these.
In order to say create a server, i click on the name of a client and it brings me to the Server Interactive report to see the associated servers. I then click a "Create a Server" link that brings me to the create a server page. The issue i am having is that I would like to have the previous value of the primary key (Client ID) passed from the Server interactive report to the form where i create a new server so that the client ID is already populated in the Create a Server form. Presently, the only way i am able to do this is by defining the client ID column on the Create a server form as a select list and displaying ALL the different clients. By selecting a client name, this list then returns the client id associated with that client name. This is a potential source of confusion for the users and it would be much better if the client ID was already in a text field that is disabled and all they have to do is fill out the other fields of the form.
I would greatly appreciate any help in this matter as I am fighting project deadlines. I have seen other examples that are similar, but i am still experiencing difficulty.
Thanks,
Tim

Hi,
I am still very confused as to how to get this to work.
I cannot have the value passed by clicking the client ID link from the Server Interactive Report in order to populate the Client ID field in the Add Server Form. It MUST be done by clicking an Add Server button that will pass the value as well as take me to the Add Server Form. So far, I have only been able to have the value show up if i click the client ID column on the Interactive report that has a column link defined as follows:
Name VALUE
P9_CLIENTID #CLIENTID#
However, when i do have the value passed this way i receive the following error message which proves that it is not saving the god damn state!
ORA-01400: cannot insert NULL into ("USERS"."NEW_SERVERS"."ClientID")
Error Unable to process row of table NEW_SERVERS.
Even if the value appears in the text field, it isnt really there!
How to make it know the value is there is beyond me.
I dont know what to think of this situation. I have tried all types of settings and I have a feeling it will be 2010 before this is resolved.
It is really frustrating, it has been days i am trying to get this to work...
Thanks,
Tim

Pass Values from Interactive Report

Hello,
I am sure this is an easy question, but I haven't been able to find the solution myself.
I have an interactive report that has 6 columns, which are:
Last Name
First Name
Day
Start Time
End Time
Link Column
I need to assign an ID which is not shown in the report, the Day, Start Time, and End Time to variables P5_IDX, P5_DAY, P5_START, and P5_END to be used
as Display only items on another page. I can only pass 3 values using the column link in the IR.
Is there another way to pass more than 3 values from an interactive report? Sorry if this has been asked and answered previously. I searched the forums and didn't find an answer, but maybe a searched with the wrong keywords.
Thanks for any and all assistance,
Bob

Hi,
As per my understanding ur requirement is as below.
When the user clicks the 'Link Column' it should redirect to another page with the value of id, Day, Start Time, and End Time.
Hope all the cloumns are from the same table.
As Denes said, it is enought to pass the ID value to the link column as of below.
ie., u can modify ur query as of below.
SELECT Last Name,First Name,Day,Start Time,End Time, ID as "Link Column"
FROM t.
Now u can pass the value as #Link Column# which will pass the ID value to the next page.
Hope my understanding is correct.

Passing Value from Crystal Report (special function) to Business View parameter

Friends,
Í have a scenario where i need to pass value from Crystal Report to a Business view's parameter.
Eg : CurrentCEUsername (func in crystal report)-- gives login user which i should pass to parameter in a Business view (used in the same report).
Will be able to explain more if required.
Thanks in Advance,
Bharath

I guess you got the picture wrong. User_id is not a report_level parameter .
In Data Foundation, below query is used..
select Acc_Number, Account_Group,User_id from Accounts where user_id={?User_id}
where in {?User_id} is the BV parameter...
The Filter was a solution. But it takes long time to Query all the data from DB and then filter at BV level.
How do i pass the CurrentCEUsername to {?User_id}
Value should ve CurrentCEusername always. so that query will be
select Acc_Number, Account_Group,User_id from Accounts where user_id=CurrentCEusername
It will restrict the data pulled from DB to BV .. right?

Is it possible to pass a formula value from a sub-report to a main report

Hi there,
Im trying to pass a formula value from a Sub-report back upto into my Main report but the value doesnt seem to be getting passed up. Ive tried it the other way around, that is, passing a value from the main report to the sub-report and that works fine.
Below is an example of what I am trying to do but it is not working. In my sub-report Ive declared a formula variable as,
formula name=main_subIntRatePageCount
Shared NumberVar subIntRatePageCount := TotalPageCount;
and in the Main report Ive declared the formula variable as,
formula name=subIntRatePageCount
Shared NumberVar subIntRatePageCount;
subIntRatePageCount;
I want the value assigned to "subIntRatePageCount" in my Sub-Report to be available to my Main report.
The problem I am trying to solve is that the sub-report is spilling over onto two pages, and I need a way of updating the page display on the main report to reflect this. The page display is of format, "displaying page 1 of 3", but its not taking into account the extra page produced by the sub-report, so it should say "displaying page 1 of 4".

Also thanks Raghavendra, Asha,
I've tried adding the "whileprintingrecords" statement but that doesnt seem to make any difference.
I notice that the subReport is being called from my the GroupFooter section of the main report, and I am trying to reference the variable in the main repot in the Page Footer section. Could it be that the variable hasnt been calculated in the Page Footer by the time I calculate it in sub-Report? I thought Crystal Reports does at least 5 passes over the report evaluating all the formulas before it prints the report?
The problem Im trying to solve is I need to know how many pages my report will have before its completed, so that i can print the statement "displaying page 1 of X", and X is currently not being calculated correctly because the sub-report is printing onto 2 pages and not 1 so the report thinks I have 1 of X pages and not X+1.
Regards
Robert.

Passing values from main report to sub-reports

- How do we pass values from main report to sub-report?

Look at this link which shows how to pass values from a subreport to a main report.
http://www.datamanagementgroup.com/resources/trainerstalk/trainerstalk_howto_share_subreport_data_with_main_report.asp
You can use the same method to pass values from main report to a subreport.
1) Create a formula @mainFormula in the main report, as given in item 1 of link.
2) Place this formulla in a suppressed report footer section above the target subreport.
3) In the subreport, create a formula @subFormula that declares the same variable name, as given in item 3 of link.
4) Place @subFormula column in the subreport where you want to display it.

Script fails when passing values from pl/sql to unix variable

Script fails when passing values from pl/sql to unix variable
Dear All,
I am Automating STATSPACK reporting by modifying the sprepins.sql script.
Using DBMS_JOB I take the snap of the database and at the end of the day the cron job creates the statspack report and emails it to me.
I am storing the snapshot ids in the database and when running the report picking up the recent ids(begin snap and end snap).
From the sprepins.sql script
variable bid number;
variable eid number;
begin
select begin_snap into :bid from db_snap;
select end_snap into :eid from db_snap;
end;
This fails with the following error:
DB Name DB Id Instance Inst Num Release Cluster Host
RDMDEVL 3576140228 RDMDEVL 1 9.2.0.4.0 NO ibm-rdm
:ela := ;
ERROR at line 4:
ORA-06550: line 4, column 17:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null" was substituted for ";" to continue.
ORA-06550: line 6, column 16:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev su
But when I change the select statements below the report runs successfully.
variable bid number;
variable eid number;
begin
select '46' into :bid from db_snap;
select '47' into :eid from db_snap;
end;
Even changing the select statements to:
select TO_CHAR(begin_snap) into :bid from db_snap;
select TO_CHAR(end_snap) into :eid from db_snap;
Does not help.
Please Help.
TIA,
Nischal

Hi,
could it be the begin_ and end_ Colums of your query?
Seems SQL*PLUS hs parsing problems?
try to fetch another column from that table
and see if the error raises again.
Karl

Problem passing parameter from one interactive report to another

Hi.
I'm going slightly mad over this simple problem.
Apex 4.0.2 installed. Created one interactive report with 4 columns, one is linked to a custom target which is another interactive report where the column is used in the WHERE clause through a hidden field value.
This works fine in other applications on same Apex install, but not in this one.... Writing the hidden field to the screen shows that it gets the correct value from the first report, but the SQL-query returns no rows when querying on the :<parameter_name> value (there are rows in database - query runs fine when hard coding a value).
Tried link column both directly from the column value link definition, and from the report definition - both pass value ok to hidden field, but SQL-query doesn't pick it up.
Tried deleteing and recreating second report page, same problem.
Anyone else had this problem? Are there any properties on the pages/fields that I've forgot to set, that may cause the session value not to be set when the query is running? I've got it working in other apps, and can't find anything done differently there....
Regards,
-Haakon-

Yes, it shows the correct value. Also creating a second text field and assigning it the Source value of the hidden field shows the correct value in the textbox on page load.
It's only the report's sql query that doesn't seem to get the value. Hard coding a document number (without hyphens etc) works fine, I get the expected records - so the rest of the query is correct.
Tried '=' and LIKE - but still nothing...
It's just the sql variable substitution of :P21_DOCNO that under no circumstance will work.... also tried a simple pl/sql block with the variable - nothing.... using the V('P21_DOCNO') - nothing....
It seems like the sql query is parsed and run before the hidden field gets it's value or something....
This is very strange - as it works in another application on same Apex installation.

Passing values from a FORM to another FORM

Hi,
I have to pass values from FORM "A" to FORM "B". What is the best way to do this?\
Can I use a GLOBAL variable?
Thanks,
Marc.

I think he meant the global namespace.
You set a :global_your_name_here to a value and that value is available in your entire application. See the help file section on the global namespace for more information.
Forms parameters are parameters that you form picks up from the outside when it starts. The calling entity must supply them in the URL or they will be set to null. You set them up in the object navigator in the Parameters node.

Passing values from javascript in pop up window to parent jsp

Hi
I am trying to pass values from a pop up window to the main window that popped this child window , with the idea to have the parent window refresh itself with value from pop up window.But the values are not going through.I do a request on the hidden variable but when the parent
jsp refreshes , the variable is still null...
The following is the code i have .
Parent jsp:a.jsp
<form name='summary'>
<input type=hidden name=customerid value="">
<input type="button" class="textButton" name="action" value="customerlist" onClick="javascript:openWin('b.jsp','800','350')">
<script>
function openWin(loc, w, h) {
var newWin = window.openloc,"HTML",'dependent=1,toolbar=0,location=0,directories=0,status=0,menubar=0,scrollbars=1,resizable=1,width=' + w + ',height=' + h);
newWin.window.focus();
</SCRIPT>
<%
String optionVal = request.getParameter("customerid");%>
var user = "<%= optionVal%>";
</form>
child jsp- b.jsp (pop up window)
<script>
function closer(){
var val = document.formname.id.selected.value;
window.opener.document.summary.customerid.value = val;
window.opener.location.reload();
</script>
<form name = formname>
<input type="text" name="id" value = ''>
<input type="button" class="textButton" value="select"
onClick="closer();window.close();">
</form>
Any ideas on what i am missing
Thanks
Arn

use window.opener.document.forms[0].filedname.value = 'value u need to set'

Pass value from Java to Perl

Anyone knows how to pass value from Java to Perl program?

Did you write the perl program? Can you change it? Or are you trying to interface to something that already exists? This will limit your options, of course.
Anyway the first option is simple. The java program does this:
System.out.println("This is a line of input.");The perl program does this:
while(<>)and in that block, $_ is assigned to each line of input.
Then you can invoke both like this:
$ java MyJavaProgram | perl MyPerlProgram.pl

Pass Value from Excel to custom program

Hello,
I want to pass value from Excel to Custom Program being called in the Custom Integrator and i am using the Import in the Importer section but it is not getting passed.
Please advise and i am on R12.1.3.
Thanks

Pl do not post duplicates - Concurrent Program Parameter

How can I pass values from one node to another

Give a standard and efficient way to pass values from child to parent

hai Prathap
You can use the custom event for passing values from child to parent

Re: Help needed in passing values from workflow to Approve Forms

Dear Experts,
how do I pass values from a workflow to a step (Form) - approve form?
I am using a customized table structure as my data source (FORMCONTAINERELEMENT) but am stuck on how to access the data when i get to to the screen painter's flow logic... What am i missing? Can you give me a step by step example. the ones i see on the net are input fields that update the screen... nothing that shows value being passed from the outside.
I need to pass an exisitng value in the workflow into the form for approval of the the assigned agent.
Please help!!
Thank you.

Hello !
         Create a method just before the form step.This method should populate the values for the fields maintained in the form.
         Pass the values populated from this method to your customized table structure (data source).In other words, you have to pass all the values to the workflow container.
        To the step, pass this workflow container by binding.In the control tab of form step, you have to do the binding.
Regards,
S.Suresh

Pass value from BO to report

Similar Messages

Maybe you are looking for