Pass ZFIELD in MKPF table using BAPI_GOODSMVT_CREATE using EXTENSIONIN

Hi Friends,
I have to pass value to ZFIELD in table MKPF using BAPI_GOODSMVT_CREATE.
there is one structure EXTENSIONIN in BAPI.
Please give a example for filling this struture and passing filed to BAPI and to database.
Regards,
Madan

champs Please give some idea

Similar Messages

  • Passing pl/sql table to Java using Oracle JDBC and vice - versa

    A small article on the given topic with sample code and comments, to make code crystal:
    http://mukx.blogspot.com/2007/12/passing-plsql-table-to-java-using.html
    --Mukul                                                                                                                                                                                                                                                                                                                                                           

    Tapash,
    I have seen people using Rosetta in almost all projects in previous years, frequently in couple of projects. I was not aware that Rosetta is an internal thing, anyways if that is the case y oracle is shipping rosetta jar file to customers?
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Passing dynamic internal table to FM using RFC

    Dear All,
    Is it possible to pass a dynamic internal table to a function module using RFC?
    If it is possible than how do i achive this?

    Basically not, RFC enabled FM parameters must be defined by a LIKE or TYPE clause. so you may try to use a prededined SAP type wide enough (e.g. TAB512 ) and map the data in the FM and caller program (in Unicode try to use tools like class CL_ABAP_CONTAINER_UTILITIES to map data between actual internal table record and RFC used itab "container" type)
    For examples look at RFC enabled RFC_GET_TABLE_ENTRIES FM, and look for where-used program.
    Regards,
    Raymond

  • Post Goods issue using bapi_goodsmvt_create

    hi,
    Iam trying to do post goods issue using bapi_goodsmvt_create. please let me know what are the mandatory fields to be passed?

    hi,
    *& Report  ZRPT_SUB_KO01GOODSMOVEMENT
    REPORT  ZRPT_SUB_KO01GOODSMOVEMENT.
    PARAMETERS : P_BAG(17)  TYPE C,
                 P_ZZORG LIKE zaUFK-ZZORG,
                 P_MATNR LIKE MARA-MATNR,
                 P_WERKS LIKE AUFK-WERKS,
                 P_WERK LIKE AFPO-PWERK,
                 P_DATE LIKE MKPF-BUDAT,
                 P_LGORT LIKE GOITEM-LGOBE.
    DATA : BDC_DATA TYPE STANDARD TABLE OF BDCDATA. "internla table for bdc data
      DATA : WA_BDC_DATA TYPE BDCDATA .                "work area for bdc data
      DATA : T_XMSEG TYPE   MSEG.
      DATA : T_XMKPF TYPE MKPF.
      DATA : V_BAGS1(17) TYPE C.
    DATA : BEGIN OF WA_MB1B,
           ZZGCODE TYPE ZMIGO-ZZGCODE,
           ZZGBAGS TYPE ZMIGO-ZZGBAGS,
           WERKS TYPE AUFK-WERKS,
           LGORT TYPE VBRP-LGORT,
           ZZORG TYPE zAUFK-ZZORG,
           END OF WA_MB1B.
    DATA : V_MATERIAL TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
    data : v_date(10) type c.
    DATA : T_GOODSMVT_HEADER TYPE BAPI2017_GM_HEAD_01,
           T_GOODSMVT_CODE TYPE BAPI2017_GM_CODE,
           T_GOODSMVT_ITEM TYPE STANDARD TABLE OF BAPI2017_GM_ITEM_CREATE,
           T_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
    DATA : WA_GOODSMVT_ITEM TYPE BAPI2017_GM_ITEM_CREATE.
    DATA : BEGIN OF S_MARA,
           MEINS LIKE MARA-MEINS,
           END OF S_MARA.
    DATA : MATERIALDOCUMENT TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
    *FORM GOODSMOVEMENT TABLES T_RETURN
                             USING WA_MB1B LIKE WA_MB1B.
    SELECT SINGLE  MEINS
                   FROM MARA
                   INTO S_MARA
                   WHERE MATNR = P_MATNR.
       CONCATENATE p_date6(2) p_date4(2) p_date+0(4) INTO V_DATE SEPARATED BY '.'.
        T_GOODSMVT_HEADER-PSTNG_DATE = P_DATE.
        T_GOODSMVT_HEADER-DOC_DATE = P_DATE.
        T_GOODSMVT_CODE-GM_CODE = '04'.
        WA_GOODSMVT_ITEM-MATERIAL =      P_MATNR.                    "'000000000000001556'.
        WA_GOODSMVT_ITEM-PLANT  =        P_WERK.                     " '1000'.
        WA_GOODSMVT_ITEM-STGE_LOC =      P_LGORT.                    " '0001'.
        WA_GOODSMVT_ITEM-MOVE_TYPE =     'Z42'.
        WA_GOODSMVT_ITEM-VENDOR =         P_ZZORG.                   "'0000100224'.
        WA_GOODSMVT_ITEM-ENTRY_QNT =      P_BAG.                   " '1'.
        WA_GOODSMVT_ITEM-ENTRY_UOM =     S_MARA-MEINS.
        WA_GOODSMVT_ITEM-ENTRY_UOM_ISO = S_MARA-MEINS.
        WA_GOODSMVT_ITEM-MOVE_PLANT = P_WERKS.
        APPEND WA_GOODSMVT_ITEM TO T_GOODSMVT_ITEM.
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
          GOODSMVT_HEADER          = T_GOODSMVT_HEADER
          GOODSMVT_CODE            = T_GOODSMVT_CODE
    IMPORTING
        MATERIALDOCUMENT           = V_MATERIAL
    TABLES
          GOODSMVT_ITEM            = T_GOODSMVT_ITEM
    RETURN                        = T_RETURN.
    BREAK shailajaa.
               EXPORT t_return  to MEMORY ID '123'.
               EXPORT V_MATERIAL TO MEMORY ID 'MAT'.
                CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
           WAIT          = ' '.
    *ENDFORM.

  • Error while using BAPI_GOODSMVT_CREATE wiht movement type 311.

    Hi All experts,
    i am geting error msg, while using BAPI_GOODSMVT_CREATE wiht movement type 311.
    the error msg is " For reservation 0000443815 0000, no movements can be posted".
    Here is my code.
    IF I_ZMM_S_MBIB_LOT[] IS NOT INITIAL.
    *moving posting date and document date  to header
        GOODSMVT_HEADER-PSTNG_DATE = ZMM_S_MBIB_311-BUDAT.
        GOODSMVT_HEADER-DOC_DATE   =  ZMM_S_MBIB_311-BUDAT.
        LOOP AT I_ZMM_S_MBIB_LOT WHERE MENGE NE '0'.
          IF I_ZMM_S_MBIB_LOT-IND = 'X'.
    *moving material and plant ,stge_loc,qty and movement type  to header
            GOODSMVT_ITEM-MATERIAL       = I_ZMM_S_MBIB_LOT-MATNR.
            GOODSMVT_ITEM-PLANT          = I_ZMM_S_MBIB_LOT-WERKS.
            GOODSMVT_ITEM-BATCH          =  I_ZMM_S_MBIB_LOT-CHARG.
            GOODSMVT_ITEM-STGE_LOC       = I_ZMM_S_MBIB_LOT-SLGORT.
            GOODSMVT_ITEM-MOVE_TYPE      = '311'.
            GOODSMVT_ITEM-ENTRY_QNT      = I_ZMM_S_MBIB_LOT-MENGE.
            GOODSMVT_ITEM-ENTRY_UOM      = I_ZMM_S_MBIB_LOT-MEINS.
            GOODSMVT_ITEM-MOVE_MAT       = I_ZMM_S_MBIB_LOT-MATNR.
            GOODSMVT_ITEM-MOVE_PLANT     = I_ZMM_S_MBIB_LOT-RWERKS.
            GOODSMVT_ITEM-MOVE_BATCH     = I_ZMM_S_MBIB_LOT-UMCHA.
            GOODSMVT_ITEM-MOVE_STLOC     = I_ZMM_S_MBIB_LOT-UMLGO.
            GOODSMVT_ITEM-RESERV_NO      = I_ZMM_S_MBIB_LOT-RSNUM.
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
            EXPORTING
              GOODSMVT_HEADER               = GOODSMVT_HEADER
              GOODSMVT_CODE                 = '04'
          TESTRUN                       = ' '
          GOODSMVT_REF_EWM              =
            IMPORTING
          GOODSMVT_HEADRET              =
              MATERIALDOCUMENT              = MATERIALDOCUMENT
              MATDOCUMENTYEAR               = MATDOCUMENTYEAR
            TABLES
              GOODSMVT_ITEM                 = GOODSMVT_ITEM
          GOODSMVT_SERIALNUMBER         =
              RETURN                        = RETURN.
          GOODSMVT_SERV_PART_DATA       =
          EXTENSIONIN                   =
        ELSE.
    Moderator message: duplicate post locked.
    Edited by: Thomas Zloch on Feb 23, 2011 11:46 AM

    Hi Sachin,
    Pass the Item Number of Reservation to GOODSMVT_ITEM-RES_ITEM .
    Regards
    DKS

  • Posting a goods Receipts by using 'BAPI_GOODSMVT_CREATE'

    Hi experts,
    For a Handling Unit number, im Posting a goods Receipts by using 'BAPI_GOODSMVT_CREATE'
    Im passing the below values to the BAPI, to create a Material document and transfer order.
    GOODSMVT_HEADER- PSTNG_DATE (System Date)
    GOODSMVT_HEADER - DOC_DATE (System date)
    GOODSMVT_HEADER- PR_UNAME (SY-NAME)
    GOODSMVT_CODE- GM_CODE ( 01)
    GOODSMVT_ITEM-MOVE_TYPE (Movement type): movement type '101'
    GOODSMVT_ITEM- DELIV_NUMB_TO_SEARCH (Delivery)
    GOODSMVT_ITEM-DELIV_ITEM_TO_SEARCH (Delivery item)
    GOODSMVT_ITEM-PLANT (Plant) VEPO- WERKS
    GOODSMVT_ITEM-STGE_LOC (Storage location) VEPO- LGORT
    GOODSMVT_ITEM-ENTRY_QNT (Quantity)
    GOODSMVT_ITEM-ENTRY_UOM (Unit of measure)
    GOODSMVT_ITEM-PO_NUMBER (Purchase order)
    GOODSMVT_ITEM-PO_ITEM (Purch. order item)
    GOODSMVT_ITEM-UNLOAD_PT ( HU number)
    GOODSMVT_ITEM-MVT_IND (Movement indicator) = 'B'
    I dont know what values has to be passed to the following fields in BAPI
    *GOODSMVT_ITEM-SU_PL_STCK_1*
    *GOODSMVT_ITEM-SU_PL_STCK_2*
    *GOODSMVT_ITEM-ST_UN_QTYY_1*
    *GOODSMVT_ITEM-ST_UN_QTYY_2*
    *GOODSMVT_ITEM-UNITTYPE_1*
    *GOODSMVT_ITEM-UNITTYPE_2*
    All those values has to be updated in the Material document.
    Please help me on this.
    Thanks & regards,
    Leo
    Edited by: Thomas Zloch on Nov 17, 2011 10:11 AM

    I konw that I'm digging an old thread but let's have a look. I have the same problrm (filling the DMBTR field from the BAPI). I have not tried yet but checking the code of the BAdI I found that the EXTENSIONIN_TO_MATDOC method of the MB_BAPI_GOODSMVT_CREATE BAdI is called before creating the material posting and it has the IMSEG table as changing parameter. I will give it a try soon. Hope that it will work.
    Has anyone experience with it by any chance?
    Adam

  • How to populate cusotom fields using BAPI_GOODSMVT_CREATE  for MIGO

    Hi,
    I was to update custom field using BAPI_GOODSMVT_CREATE for MIGO and store it is MSEG table.
    Please tell me how to proceed.
    Moderator message: last warning, if you continue to post the same thread again, I will submit your user ID for deletion. See my comments in your previous posts.
    Edited by: Thomas Zloch on Jul 14, 2011 4:38 PM

    Hi ANID,
    Thanks for the reply.
    I have checked in the documention of the bapi and no communication structure regarding to the bapi is there so i am not able to figure out where to add the custom field so that it can be added in the MKPF table.
    Regads
    Dipak

  • How to use BAPI_GOODSMVT_CREATE  receipt goods(GR) for subcontract  PO

    Hi Friends ,
                                  Please any one suggest me, how to use BAPI_GOODSMVT_CREATE to receipt goods(MIGO-GR) form subcontract PO , here my confusion is how to pass Component materials(BOM materials) and their quantity to this BAPI. While reading BAPI FUNCTION MODULE DOCUMENT   : i found some information but am unable to understand  usage of   LINE_ID  and PARENT_ID  .      
                              Please any one suggest me how to pass values to above  BAPI
    Thanks in advanced.
    Shiv'.

    Hi,
    Did u check the serial numbers table before calling the BAPI. Might be the case tht same serial number is assigned for all items, in this case the goods movement may be possible with same serial number for all items.
    Reagrds,
    Aditya
    Edited by: aditya on Aug 11, 2009 11:46 AM

  • Error in Bapi_GoodsMvt_Create using Purchase order

    Hi Friends,
    I am using Bapi_goodsmvt_create for Goods Receipts against Purchase order.
    The below code i have given for Goods receipts
    It shows the error like
    ID : 8J
    Err No.:182
    Message : Entry 4500000344 00040 0000 not valid; correct entry
    Please help me to correct this error.
    Thanks
    Shankar
    ===================================
    Heading Structure
    st_gm_code-gm_code          = '01'.
    st_gm_header-pstng_date = '20070930'.
    st_gm_header-doc_date = '20070930'.
    st_gm_header-gr_gi_slip_no = '970015'.
    st_gm_header-bill_of_lading = '527213'.
    st_gm_header-header_txt = 'AIR'.
    st_gm_header-ref_doc_no = '4500000344'.
    Tables - ITEM CREATE.
    itab_afs_gm_itemx-plant = '2000'.
    itab_afs_gm_itemx-deliv_numb = '80100121'.
    itab_afs_gm_itemx-stge_loc = '2110'.
    itab_afs_gm_itemx-move_stloc = '2110'.
    itab_afs_gm_itemx-po_number = '4500000344'.
    itab_afs_gm_itemx-po_item = '00040'.
    itab_afs_gm_itemx-vendor = '0000650003'.
    itab_afs_gm_itemx-vendrbatch = 'ABC123'.
    itab_afs_gm_itemx-move_type = '101'.
    itab_afs_gm_itemx-mvt_ind = 'B'.
    itab_afs_gm_itemx-material = '000000000030000227'.
    itab_afs_gm_itemx-entry_qnt = 10.
    APPEND itab_afs_gm_itemx .
    ****&& Grid values
    gr_afs-matdoc_itm     = '0001'.
    gr_afs-grid_value = '205'.
    gr_afs-withdrawn_sku = 'X'. "Final issue at sku level
    gr_afs-stock_cat = '0000000001000366'.
    APPEND gr_afs.
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
      EXPORTING
        goodsmvt_header           = st_gm_header
        goodsmvt_code             = st_gm_code
      TESTRUN                     = ' '
    IMPORTING
       goodsmvt_headret           = st_gm_headret
       materialdocument            = mat_doc
       matdocumentyear             =  doc_year
      TABLES
        goodsmvt_item             = itab_afs_gm_itemx
       afs_goodsmvt_sku           = gr_afs
        return                    = bapi_return.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
    ENDIF.
    CLEAR itab_afs_gm_itemx.
    REFRESH itab_afs_gm_itemx.
    CLEAR gr_afs.
    REFRESH gr_afs.

    Hi,
    Here is some sample code from one of my programs, which does a 551 movement type. This should get you started. Just check the RETURN table for messages, they should tell you what you are missing.
    code
    Structures for BAPI
    data: gm_header type bapi2017_gm_head_01.
    data: gm_code type bapi2017_gm_code.
    data: gm_headret type bapi2017_gm_head_ret.
    data: gm_item type table of
    bapi2017_gm_item_create with header line.
    data: gm_return type bapiret2 occurs 0.
    data: gm_retmtd type bapi2017_gm_head_ret-mat_doc.
    clear: gm_return, gm_retmtd. refresh gm_return.
    Setup BAPI header data.
    gm_header-pstng_date = sy-datum.
    gm_header-doc_date = sy-datum.
    gm_code-gm_code = '06'. " MB11
    Write 551 movement to table
    clear gm_item.
    move '551' to gm_item-move_type .
    move '000000000040001234' to gm_item-material.
    move '1' to gm_item-entry_qnt.
    move 'EA' to gm_item-entry_uom.
    move '0004' to gm_item-plant.
    move '4000' to gm_item-stge_loc.
    move '201' to gm_item-move_reas.
    Determine cost center per plant
    case xresb-werks.
    when '0004'.
    move '0000041430' to gm_item-costcenter.
    when '0006'.
    move '0000041630' to gm_item-costcenter.
    when '0007'.
    move '0000041731' to gm_item-costcenter.
    when '0008'.
    move '0000041830' to gm_item-costcenter.
    endcase.
    append gm_item.
    Call goods movement BAPI
    call function 'BAPI_GOODSMVT_CREATE'
    exporting
    goodsmvt_header = gm_header
    goodsmvt_code = gm_code
    importing
    goodsmvt_headret = gm_headret
    materialdocument = gm_retmtd
    tables
    goodsmvt_item = gm_item
    return = gm_return.
    call function 'BAPI_TRANSACTION_COMMIT'
    exporting
    wait = 'X'.
    [/code]
    Welcome to SDN! Please remember to award points for helpful answers and mark you post as solved when solved completely. Thanks.
    REgards,
    Raj.

  • Error in updating 311 movement using BAPI_GOODSMVT_CREATE

    Hi All,
    I need hlep to understand the problem in doing a transfer.
    SAP MII is doing a 311 type movement using BAPI_GOODSMVT_CREATE. BAPI is returning the response back to MII. Once the BAPI is commited it shall make transfer inside SAP. But it does not reflect the movement while checking under HUMO.
    under SM13 it say " SSFCOMPOSER 323"  error in address output (name not filled)
    MII is getting this reponse back as a result of BAPI execution.
    <?xml version="1.0" encoding="UTF-8"?>
    <BAPI_GOODSMVT_CREATE>
    <INPUT><GOODSMVT_CODE><GM_CODE>04</GM_CODE></GOODSMVT_CODE><GOODSMVT_HEADER><PSTNG_DATE>2010-07-03</PSTNG_DATE><DOC_DATE>2010-07-03</DOC_DATE><REF_DOC_NO/><BILL_OF_LADING/><GR_GI_SLIP_NO/><PR_UNAME/><HEADER_TXT/><VER_GR_GI_SLIP/><VER_GR_GI_SLIPX/><EXT_WMS/><REF_DOC_NO_LONG/><BILL_OF_LADING_LONG/><BAR_CODE/></GOODSMVT_HEADER><GOODSMVT_REF_EWM><REF_DOC_EWM/><LOGSYS/><GTS_SCRAP_NO/></GOODSMVT_REF_EWM><TESTRUN/></INPUT>
    <OUTPUT><GOODSMVT_HEADRET><MAT_DOC/><DOC_YEAR>0000</DOC_YEAR></GOODSMVT_HEADRET><MATDOCUMENTYEAR>0000</MATDOCUMENTYEAR><MATERIALDOCUMENT/></OUTPUT>
    <TABLES><EXTENSIONIN/><GOODSMVT_ITEM><item><MATERIAL>130116</MATERIAL><PLANT>2715</PLANT><STGE_LOC>LINE</STGE_LOC><BATCH>96</BATCH><MOVE_TYPE>311</MOVE_TYPE><STCK_TYPE/><SPEC_STOCK/><VENDOR/><CUSTOMER/><SALES_ORD/><S_ORD_ITEM>000000</S_ORD_ITEM><SCHED_LINE>0000</SCHED_LINE><VAL_TYPE/><ENTRY_QNT>96.000</ENTRY_QNT><ENTRY_UOM/><ENTRY_UOM_ISO/><PO_PR_QNT>0</PO_PR_QNT><ORDERPR_UN/><ORDERPR_UN_ISO/><PO_NUMBER/><PO_ITEM>00000</PO_ITEM><SHIPPING/><COMP_SHIP/><NO_MORE_GR/><ITEM_TEXT/><GR_RCPT/><UNLOAD_PT/><COSTCENTER/><ORDERID/><ORDER_ITNO>0000</ORDER_ITNO><CALC_MOTIVE/><ASSET_NO/><SUB_NUMBER/><RESERV_NO>0000000000</RESERV_NO><RES_ITEM>0000</RES_ITEM><RES_TYPE/><WITHDRAWN/><MOVE_MAT/><MOVE_PLANT>2715</MOVE_PLANT><MOVE_STLOC>J01</MOVE_STLOC><MOVE_BATCH>96</MOVE_BATCH><MOVE_VAL_TYPE/><MVT_IND/><MOVE_REAS>0000</MOVE_REAS><RL_EST_KEY/><REF_DATE>0000-00-00</REF_DATE><COST_OBJ/><PROFIT_SEGM_NO>0000000000</PROFIT_SEGM_NO><PROFIT_CTR/><WBS_ELEM/><NETWORK/><ACTIVITY/><PART_ACCT/><AMOUNT_LC>0</AMOUNT_LC><AMOUNT_SV>0</AMOUNT_SV><REF_DOC_YR>0000</REF_DOC_YR><REF_DOC/><REF_DOC_IT>0000</REF_DOC_IT><EXPIRYDATE>0000-00-00</EXPIRYDATE><PROD_DATE>0000-00-00</PROD_DATE><FUND/><FUNDS_CTR/><CMMT_ITEM/><VAL_SALES_ORD/><VAL_S_ORD_ITEM>000000</VAL_S_ORD_ITEM><VAL_WBS_ELEM/><GL_ACCOUNT/><IND_PROPOSE_QUANX/><XSTOB/><EAN_UPC/><DELIV_NUMB_TO_SEARCH/><DELIV_ITEM_TO_SEARCH>000000</DELIV_ITEM_TO_SEARCH><SERIALNO_AUTO_NUMBERASSIGNMENT/><VENDRBATCH/><STGE_TYPE/><STGE_BIN/><SU_PL_STCK_1>0</SU_PL_STCK_1><ST_UN_QTYY_1>0</ST_UN_QTYY_1><ST_UN_QTYY_1_ISO/><UNITTYPE_1/><SU_PL_STCK_2>0</SU_PL_STCK_2><ST_UN_QTYY_2>0</ST_UN_QTYY_2><ST_UN_QTYY_2_ISO/><UNITTYPE_2/><STGE_TYPE_PC/><STGE_BIN_PC/><NO_PST_CHGNT/><GR_NUMBER/><STGE_TYPE_ST/><STGE_BIN_ST/><MATDOC_TR_CANCEL/><MATITEM_TR_CANCEL>0000</MATITEM_TR_CANCEL><MATYEAR_TR_CANCEL>0000</MATYEAR_TR_CANCEL><NO_TRANSFER_REQ/><CO_BUSPROC/><ACTTYPE/><SUPPL_VEND/><MATERIAL_EXTERNAL/><MATERIAL_GUID/><MATERIAL_VERSION/><MOVE_MAT_EXTERNAL/><MOVE_MAT_GUID/><MOVE_MAT_VERSION/><FUNC_AREA/><TR_PART_BA/><PAR_COMPCO/><DELIV_NUMB/><DELIV_ITEM>000000</DELIV_ITEM><NB_SLIPS>000</NB_SLIPS><NB_SLIPSX/><GR_RCPTX/><UNLOAD_PTX/><SPEC_MVMT/><GRANT_NBR/><CMMT_ITEM_LONG/><FUNC_AREA_LONG/><LINE_ID>000000</LINE_ID><PARENT_ID>000000</PARENT_ID><LINE_DEPTH>00</LINE_DEPTH><QUANTITY>0</QUANTITY><BASE_UOM/><LONGNUM/></item></GOODSMVT_ITEM><GOODSMVT_SERIALNUMBER/><GOODSMVT_SERV_PART_DATA><item><LINE_ID>000000</LINE_ID><RET_AUTH_NUMBER/><DELIV_NUMBER/><DELIV_ITEM>000000</DELIV_ITEM><HU_NUMBER>115934300024</HU_NUMBER><INSPOUT_GUID/><EVENT/><DATE>0000-00-00</DATE><TIME>00:00:00</TIME><ZONLO/><TIMESTAMP>0</TIMESTAMP><SCRAP_INDICATOR/><KEEP_QUANTITY>0</KEEP_QUANTITY><GTS_STOCK_TYPE/><MOVE_GTS_STOCK_TYPE/></item></GOODSMVT_SERV_PART_DATA><RETURN><item><TYPE>S</TYPE><ID>L9</ID><NUMBER>514</NUMBER><MESSAGE>Delivery 80817129 created</MESSAGE><LOG_NO/><LOG_MSG_NO>000000</LOG_MSG_NO><MESSAGE_V1>80817129</MESSAGE_V1><MESSAGE_V2/><MESSAGE_V3/><MESSAGE_V4/><PARAMETER>GOODSMVT_HEADER</PARAMETER><ROW>0</ROW><FIELD/><SYSTEM>SP1330</SYSTEM></item></RETURN></TABLES>
    </BAPI_GOODSMVT_CREATE>

    PL Stock in transit exceeded by 200 UNT : 10000000125 3065 0005"
    the code does not matter, it is the process and the stock situation that does not allow the creation of the movement.
    you cannot receive e.g. 200 from in-transit stock  if you only have nothing in transit.
    First the goods issue has to be  performed in the shipping plant.

  • Goods Issue using BAPI_GOODSMVT_CREATE movement type 541

    Hi
        According to my requirement I need to do Post goods issue using BAPI_GOODSMVT_CREATE. But I am unable to do PGI . how to consume BOM details if batches are changed. please let me know what values I need to pass to BAPI . give with an example.
    Its an urgent requirement.

    are you passing batch number to the BAPI?
    if not try pass the batch number the rest of the things bapi will take care of.
    bi

  • Post GM with reference to Production Order using BAPI_GOODSMVT_CREATE

    Hi Experts,
    We need to post Goods Movement with reference to Production order. In brief, we have to get the functionality of MB1A done. I'm trying to use BAPI_GOODSMVT_CREATE, but its not reflecting the Documented Goods Movements in the Production Order.
    Here is the data i'm using:
    goodsmvt_header : posting date, document date
    goodsmvt_code : 03
    goodsmvt_item:
    material
    plant
    storage loc
    batch
    mov typ : 261
    ENTRY_QNT
    ENTRY_UOM
    ENTRY_UOM_ISO
    order id
    Sometimes it generates material doc and year in exporting parameter, and sometimes it gives message "Content of order zzzzzzz : yyyyyyy transferred to interface (IMSEG): xxxxxxx".
    But despite of this I cannot see the Documented Goods Movements reflecting in the Production Order.
    Can anyone help on this. Is there anything else to be passed or I'm missing any process ?

    Experts,
    I could get the postings done with BAPI_GOODSMVT_CREATE. I was executing BAPI_GOODSMVT_CREATE and then BAPI_TRANSACTION_COMMIT separately, thus the generated Material doc number was not getting posted. When I used the Test Sequence option from SE37 menu, it worked.

  • Need code for Generic Extraction using FM using multiple tables.

    Hi Experts,
    We are doing a generic functional module extraction based on four tables - say,
    Table TT1 u2013 with fields AA, BB.
    Table TT2 u2013 with fields CC, DD.
    Table TT3 u2013 with fields EE, FF.
    Table TT4 u2013 with fields GG, HH.
    The value of the field BB = DD.
    The value of the field DD = FF.
    The value of the field FF = HH.
    The key field with which we have to extract data is AA.
    We have created a structure for the above tables u2013 say STR containing all the fields from the above tables.
    Now as such all the data from the tables is in the internal table ITF.
    This data from the internal table is passed to the structure STR.
    Somewhere, I think we are making a mistake. I do not know where.
    When we check the datasource extraction in RSA3, we find that there is data only from the Table TT1. Data from other tables does not populate in the datasource.
    We do not know where we went wrong.
    Kindly help us.
    Thanking you all in advance.
    With Kind Regards,
    Shreeem.

    Hi,
    You will have to use the select query with joins as given in the below example,
    SELECT  pcarrid pconnid ffldate bbookid
      INTO  CORRESPONDING FIELDS OF TABLE itab
      FROM  ( ( spfli AS p
                INNER JOIN sflight AS f ON pcarrid = fcarrid AND
                                           pconnid = fconnid    )
                INNER JOIN sbook   AS b ON bcarrid = fcarrid AND
                                           bconnid = fconnid AND
                                           bfldate = ffldate     )
      WHERE p~cityfrom = 'FRANKFURT' AND
            p~cityto   = 'NEW YORK'  AND
            fseatsmax > fseatsocc.
    But I would suggest you to better create a Data base View with all the required tables and then use that view for data selection in your FM.
    Regards,
    Durgesh.

  • How to pass array of Object in A Procedure using OCCI.......

    I m also trying for How to pass Object to a procedureb using OCCI...
    Steps....
    1. I created A type.....
    2. Then I created a VARRAY using that Type.
    3.After that I have written An Procedure with object as a parameter..
    now using OCCI how do u bind the parameter with this . plz note that using OTT
    i have already created the class representation of above object type i.e class
    four Files Created 1> demo.h 2>registermapping.h
    3> demo.cpp 2>registermapping.cpp
    After I want to Pass the Values in A Vector...
    vctor<full_name *> vect;
    stmt=con->createStatement("BEGIN Add_Object(:1); END;");
    full_name *name1 = new full_name; //Giving the Error here Given below....
    name1->
    name1->
    Through name1 Which Function I will call in which I will Pass a String....
    like
    name1->readSQL("Sanjay"); Or I have to add a function......
    vect.push_back(name1);
    setVector(stmt,1,vect,"FULL_NAME");
    error C2259: 'FullName' : cannot instantiate abstract class
    can u plz suggest me Why this Error is Giving......?
    How to pass the data?
    setFirst_name() and setLast_name() this two function I will add in Demo.cpp which one created automativcally by Using OTT command.....or other way plz tell me Boss ....
    Can u lz Suggest me ASAP....

    hi Nishant ,
    What u have done Now I mm trying ....
    can u Plz Suggest me......
    How to pass and Array of Object in Procedure using OCCI... Doing....
    90% finished Two Error's Are Coming...
    1> If I create the Class then Data Not Inserting table......
    2> If I will create the Class through OTT command.......
    then U can't Instantiate Object It is DIsplying ,this is Abstract Class(PObject)...
    Beco'z the below Method is Not adding Automatically by OTT command which is Pure Virtual Function.....
    But I added this Function Still SAme Error Giving..
    getSQLTypeName(oracle::occi::Environment env, void *schName,
    unsigned int &schNameLen, void **typeName,
         unsigned int &typeNameLen) const
    Plz Suggest me....
    regard's
    sanjay

  • Records from multiple table in Forms using Structure

    Hi all,
    I thought of bringing records from more than one table to smart forms.I have done the same by using two internal tables but not using with globally declared structure.Is it like this:
    1.Create the global structure
    2.In driver program create a internal table
    3.Pull the data using select statement
    4.Pass the internal table to smartforms-> Here I dont understand how.Usually In smartforms we declare internal tables of table type like 'itable type zgkmaster'
    How to pass the internal table we created using structure to smartforms?
    Thanks

    Hi Gopi,
    the procedure u r telling is correct.
    create the structure(ex:zstruc) in se11 as the structure of the internal table.
    *popluate the data into internal table.
    *in smartform, u declare the internal table as that structure i.e itab type zstruc.
    i.e in smartforms when u declare internal table, u r telling that ur internal table having the structure similar to the structure ZSTRUC.
    In smartforms u can declare the table type using either ...type <db table> or ... type <structure>.
    san

Maybe you are looking for