Passing an import parameter to a F.M

Hi Experts,
Could anyone resolve the issue below listed .
I was passing a string consisting of both upper case and lower case letters as an input parameter to a function module, but the FM is taking the import value in upper case letter rather than mixed.
Eg : I was passing a string consisting of 'DEmo' and it is taking it as 'DEMO'.
In order to make the F.M take what i give to it as input what should i do.

Hi,
What is the import parameter type ?
Regards,
Madhukar Shetty

Similar Messages

Elementry search help (value of import parameter)

hi friends..
In my search help...when i pass value in WERKS as CV01 ..then no result is coming..as only CV0 value is passed to import parameter..
and if put CV* then list is coming..
Any IDEA to solve this problem...
Message was edited by:
Madan Gopal Sharma

Hi
Have you created the search help properly
create by going through the doc and attach to the field werks and see,
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Reward points if useful
Regards
Anji

Problem in passing import parameter to SAP Widget

Dear experts,
I have a widget which shows me important information by passing date as a parameter
on eclipse plugin.
I am able to see data only if i give date as YYYYMMDD as standard SAP format.
I want to pass sysdate in this way ,what should i write.
Controller.showMain_View({"INPUT_DATE": });
If input_Date is import parameter then how should i pass the value. ?
Thanx in advance.

hi,
First check whether you have any predefined functions in the widget library..else create a java script and call it in your widget...
you can use this Java script code and modify the output according to your usage using string functions:
use date function to get the system date...
also include the js file in your .kon file...
thanks
jaideep srinivasan

How to pass import parameter it_header_guid to FM CRM_ORDER_READ

Hi,
I have an internal table with only one field GUID of type CRMT_OBJECT_GUID.
Now I need to pass this into the import parameter of the FM CRM_ORDER_READ.
I tried in many ways but getting a type conflict error.
<removed_by_moderator>
Thanks,
Madhurima
Edited by: Julius Bussche on Sep 15, 2008 12:49 PM

Hi Madhurima,
Post CRM Technical or Functional related queries in "Customer Relationship Management (CRM) - General & Framework" available under SAP Solutions in Expert Forums.
And regarding your question,
Your guid should be of "CRMT_OBJECT_GUID_TAB" type and not CRMT_OBJECT_GUID.
Eg,
DATA : IT_GUID TYPE CRMT_OBJECT_GUID_TAB.
APPEND '488628CFB8C600B0E1008000C0090137' TO IT_GUID.
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
IT_HEADER_GUID = IT_GUID
Hope this helps.
Thanks.
Best Regards,
Arun Sankar.

HOW TO PASS SELECT-OPTIONS AS IMPORT PARAMETER TO A CLASS

Hi experts,how to pass select options value as a export parameters to a zclass.
can give me some idea.
Thanks
sai

As Sachin already said, selection options are stored in an internal table. You can reconstruct the table type without the corresponding input fields using the type addition RANGE OF.
So - assuming you have the following in your program:
DATA: wa TYPE sflight.
SELECT-OPTIONS so_car FOR sflight-carrid.
you can create a publically-visible type in your class using direct type entry and the code
TYPES: my_selectoption TYPE RANGE OF sflight-carrid.
and use this to define the importing parameter of the method.
The only other thing you have to remember is that select-options generates an internal table with header line. Thereore, to pass the table to the method, you would use (in the above example) so_car[], and not just the name of the select-option.
Hope this helps.
Regards
Jon.

Passing importing parameter in ABAP to java script variable

Hi Experts,
I am calling a ABAP function module in javascript.Now how can I take importing parameter in ABAP to java script variable. Because I need to give alert using the improting Paramter value...
Thanks in advance..
RR

to pass ABAP variable value to javascript variable the syntax is
var myjsvariable = "<%=abapvariable%>";
Edited by: Durairaj Athavan Raja on Jul 29, 2009 2:39 PM

Passing an IMPORT Table Parameter...

Yesterday, I was working on my SP01 PHP-SAP Based and I found a little problem...
I created a "Z" based version of RSPO_L_RETURN_RAW_DATA (I need it to make it RFC enabled)....But there's one problem....
One of the IMPORT parameters is RQ which is really a Table, structure TSP01SYS.
I created something like this...
[code]
$RQ = Array( 'RQIDENT' => $RQIDENT,
 'RQCLIENT' => $RQCLIENT,
 and so on....
[/code]
An passed like a normal Import parameter....But it doesn't work....I try to pass it as a table parameter...but of course that wouldn't work either....
How can I achieved that???
Greetings,
Blag.

Ooopppsss! -:'( Shame on me....I just found this on Eduard's homepage...
[code]
<?php
 saprfc_import ($fce,"NAME","Smith");
 saprfc_import ($fce,"FULLNAME", array ("FIRST"=>"John","LAST"=>"Smith"));
?>
[/code]
Maybe I get an error in my array...Or I need to build it inside my Import....Yesterday my internet connection broke so I couldn't look for it....Still....I'm not going to close the question until I test this....So, please try to help me -;) Points will be assigned -:D
Greetings,
Blag.

Import Parameter as Select Option for a FM in ECC 6.0

Hi All,
Can someone help me get the import parameter of a function module to be of the type select-options( the way it is used in reports) in ECC 6.0.
Thanks for all your help in advance.
Divya

What I do is as following....
I create two parameters...One for START and the other for END....Then, inside my FM I create a RANGE...
DATA: BEGIN OF r_datum OCCURS 1,
 sign(1),
 option(2),
 low TYPE vekp-vhilm,
 high TYPE vekp-vhilm,
 END OF r_datum.
Passing the START to low and END to high....
P.S: Don't forget to assign points to useful answers.
Greetings,
Blag.
Message was edited by:
 Alvaro Tejada Galindo

How to use select-options in the function module of import parameter ?

Hi ...
   I have created a BAPI and tested in SWO1 tcode , by giving the single value for an company code ( BUKRS ) , it executed properly .
Same thing is working after implementing in a program .
so now it is working for fetching a single company code details .
My requirement is : I want to use select-options in program as well as in function module IN IMPORT PARAMETER.
Program :
REPORT ZTEST.
TABLES : T001 , ZBAPI_STR .
TYPES : BEGIN OF TY_ITEM .
          INCLUDE STRUCTURE ZBAPI_STR .
TYPES : END OF TY_ITEM .
DATA :WA_ITEM TYPE TY_ITEM ,
      ITEM LIKE STANDARD TABLE OF WA_ITEM INITIAL SIZE 0 .
PARAMETER : BUKRS TYPE ZBAPI_STR-BUKRS.
call function 'ZBAPI_FMT001'
exporting
    bukrs         = BUKRS
IMPORTING
RETURN        =
tables
    itemtab       = ITEM
IF ITEM IS NOT INITIAL .
LOOP AT ITEM INTO WA_ITEM .
    WRITE : / WA_ITEM-BUKRS , WA_ITEM-BUTXT , WA_ITEM-ORT01 , WA_ITEM-LAND1 .
ENDLOOP.
ENDIF.
FUNCTION MODULE :
FUNCTION ZBAPI_FMT001.
""Local Interface:
*" IMPORTING
*"     VALUE(BUKRS) TYPE EFG_TAB_RANGES
*" EXPORTING
*"     VALUE(RETURN) TYPE BAPIRET2
*" TABLES
*"      ITEMTAB STRUCTURE ZBAPI_STR
SELECT BUKRS BUTXT ORT01 LAND1 FROM T001 INTO TABLE ITEMTAB WHERE BUKRS = BUKRS .
ENDFUNCTION.
Regards
Deepa.

I have given a similiar example which i did
Declare a
Table type:Z_TT_PONUM
Short text : Select options PO Number
in SE11 tcode with row type eg: Z_ST_PONUM
create a structure (this will be the row type)
Structure          Z_ST_PONUM
Short text         Select Options Field PO number
Compenent Compent type
SIGN       BAPISIGN      Inclusion/exclusion criterion SIGN for range tables
OPTION       BAPIOPTION      Selection operator OPTION for range tables
LOW       EBELN                      Purchasing Document Number
HIGH       EBELN                      Purchasing Document Number
In the function module import
give as
I_PO_NUM     TYPE     Z_TT_PONUM     opt pass value Select options PO Number
Hope this is exactly what you want to know.
So you create a structure simliar to mine but the low an high whould be your component
then a table type and then include that in the BAPI.
Then pass your select-option value to this BAPI when you call this BAPI in the program

Field symbol as import parameter in class method ???

Hi everyone,
is it possible to pass a field symbol as an import parameter to a method in a class? If yes, how do I define the data type of the import parameter? I'm trying to work with field symbols as the program doesn't know what kind of structure the program parameter p_srcdso has. Coding example would be something like this:
PARAMETERS: p_srcdso TYPE rsdodsobject DEFAULT '/BIC/AKVI0001'.
DATA: lr_srcpkg TYPE REF TO data.
FIELD-SYMBOLS: <fs_table> TYPE ANY TABLE.
CREATE DATA lr_srcpkg TYPE TABLE OF (p_srcdso).
ASSIGN lr_srcpkg->* TO <fs_table>.
SELECT *
FROM (p_srcdso)
INTO TABLE <fs_table>.
CALL METHOD cl_ref->create_somethign
EXPORTING
i_source_package = <fs_table>.
Thanks,
Alex

Halo Alexander,
You can use TYPE REF TO DATA( say the parameter name is i_data) as the importing parameter of the method create_somethign and inside the method you need to dereference it using data reference variable again.
data: dref type ref to data.
field-symbols: <fs_table> type table.
create data dref like i_data.
assign dref->* to <fs_table>.
Regards
Arshad

Adobe form as PDF string in Webservice importing parameter

Hello Experts,
Can you please clarify the below issue.
I have created a webdynpro.
I have placed an interactive form on one of it's view.
And kept one Submit button(Execute type) on the form to trigger one webservice.
This webservice has the importing parameter as the PDFSTRING.
So my requirement is to pass the entire form with filled values to the webservice importing parameter. I will be storing this PDF string in some tables.
What scripting i need to use in the form for getting this done.
Thanks in advance.
Regards,
Ram.

Hi Sai,
Thanks for ur input.
My requirement is not exactly the string with XML data, but the string with PDF data.
I will try to explain my requirement here in detail.
I have the adobe form triggering from the webdynpro. This form has different objects like, text fields, dropdowns, check boxes, radio buttons...etc and one SUBMIT button for which webservice is attached in the properties.
User will fill all the fields and clicks on SUBMIT. When he clicks on the SUBMIT, the webservice should attach the filled PDF document at partner level.
For this purpose, i need the string with PDF data and not the XML.
WIth this PDF string again i should be able to re generate the PDF document which was filled by the user.
If string with PDF data is not possible, Please suggest me the possible way of achieving this?
Regards,
Ram.

Screen field pass as a parameter

Hi,
Can i pass a screen field as import parameter or table to user exit ???
Regards
Nitin Varshney

Hi Doug,
You can write a custom Java iView, calculate the variable param there and use URLGenerator to get the URL for the SAP transaction. Then just display it in an IsolatedHTMLContainer in the iView.
Regards,
Patrick.

Function module import parameter

I had used a bapi in the program and i got a dump.
then i recetified the dump. But kindly tell me the
reason .
My program is like this..
Report xyz.
DATA wa_bapireturn TYPE bapireturn.
DATA it_bapireturn LIKE TABLE OF wa_bapireturn.
DATA wa_bapisdstat TYPE bapisdstat.
DATA it_bapisdstat LIKE TABLE OF wa_bapisdstat.
PARAMETERS p_vbeln LIKE vbap-vbeln.
START-OF-SELECTION.
CALL FUNCTION 'BAPI_SALESORDER_GETSTATUS'
    EXPORTING
      salesdocument = so_vbeln
    IMPORTING
      return        = it_bapireturn
    TABLES
      statusinfo    = it_bapisdstat.
now i got the dump because i have used
it_bapireturn for importing.
then i modified the program like..
CALL FUNCTION 'BAPI_SALESORDER_GETSTATUS'
    EXPORTING
      salesdocument = so_vbeln
    IMPORTING
      return        = wa_bapireturn
    TABLES
      statusinfo    = it_bapisdstat.
Now the program working fine because i passed
wa_bapireturn. please tell me why it happened like
this. How to know when to pass internal table and when to
pass just a structure.
And also tell me the difference bet type and type ref to.

As per the interface definition of the BAPI, it expects one workarea in the RETURN parameter.
but it_bapireturn was an internal table so was the dump
but wa_bapireturn is a work area so it worked.
You can check the interface of the Function Module to know what to be used. Usually work areas are passed in IMPORT AND EXPORT parameters and internal tables in TABLES parameters.
by using TYPE , we create a variable of a pre difined TYPE.
by using TYPE REF we create object of a particual class
Edited by: Swastik Bharati on Aug 21, 2008 2:16 PM

How to define Export parameter as Import parameter in next test script.

Hi Experts,
We have defined Purchase order no. as export parameter in ME21N transaction test script.
Test configuration for ME21N transaction executed succesfully and the Purchase order No. appeared in the last message
is the export parameter for next test script i.e. MIGO transaction.
However I am unable to define this export parameter as Import parameter in next test script for MIGO transaction.
Please suggest me the method to define the same.
Please Help...
Thanks in Advance
Vikas

Vikas,
You need to create super script which is nothing but having the both the steps (Po creation & MIGO ) in this eCatt script. This can be achieved by using the REF command as ex. below.
Create PO
REF ( Z_CREATE_PO , Z_CREATE_PO_1 ).
Create MIGO
REF ( Z_CREATE_MIGO , Z_CREATE_MIGO_1 ).
Z_Create_PO is the actual eCatt script that you recorded to create the PO. Z_CREATE_QUOTE_1 is the interface created by SAP. Similarly you have use the REF command to call the MIGO script inside this super script.
To pass the export parameter from PO step to MIGO, double click the Z_CREATE_PO_1and define the export variable for PO number. And do the same on the interface for MIGO step.
Follow the instructions if you need in this help document posted by another user in this forum
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0134775250DB00634934533836311611End?blog=/pub/wlg/3497
Note : Cut & paste the entire link above to view the document.
thanks
Venkat

HOW TO PASS SELECT-OPTIONS PARAMETER TO A FUNCTION MODULE.

Hi friends.
HOW DO U PASS A SELECT-OPTIONS PARAMTER TO A FUNCTION MODULE AS ITS IMPORT PARAMETER(IN MY CASE rfc fM) .
Really urgent!!!
thanks to one and all

Hi,
If you are passing a single value, its better you take it from s_option-low or s_option-high (select options).
Else if you are passing values to the FM in a loop for all select option values, then better you declare an internal table with type WSELKUNNR.
get low & high fields from each row & pass them.
It will make you clear when you check out your select options in debug mode by entering different combinations of inputs.

Passing an import parameter to a F.M

Similar Messages

Maybe you are looking for