Passing Input Text Data to Dynamic TextBox in Another Scene
Hi everyone there,
I am creating a quiz for my school using flash.
I am wondering if it is possible to pass the answers key in
by students in the input text field to the dynamic textbox at the
end of the entire quiz to show all the ans by the students and all
the model ans of the quiz.
May i know if this can be done?
Or is it better to pass info from text box to text box in
from one frame to another in the same scene?
Also, how do i create a page that will list down the total
number of questions the student has answered correctly and show her
score?
Thank you very much.
FiOh
*^^*
An instructor at a summer camp told me to avoid scenes, so
I've been afraid of them ever since.
I'm not sure I quite understand the first post - you want the
students to put in their own answer key?
I made a quiz once. It was about genetics. This first frame
had a "let's go" button that started the quiz. Each consecutive
frame had a question and an oddball amount of input fields. The
frame had each input set to a certain variable. At the end it added
one to the score variable for each textfield that matched my magic
answer. You could do all kinds of things this way. The syntax
looked something like:
if(input3A.text = whatever the answer is) {
++score; //adds to score variable
and it could make a result3A_txt.text = "Bingo";
"input3A" is arbitrary - for problem three, two, etc. the
text field was called "input" and then a number, and then, if there
was more than one text field for that problem, a letter. This is
just the first field in problem three.
The second line in the if statement talks to a field. You put
a static text with the problem number, and next to it,
result3A_txt. If the user answered the problem correctly, the field
will become "Bingo" or something. You would do this for each
problem so that every correct one would say "Bingo."
To get a percent score:
percent_txt.text = Math.round((score / max_score) *
100);
Similar Messages
-
How to pass Input file data into BAPI BAPI_0035_CREATE
Hi Friends,
Need a help.. First time i am developing a report using this BAPI BAPI_0035_CREATE..
actually i am uploading the Input file data using this BAPI.. my input file having 14 fields.. this 14 fields are corresponding into difeerent strutures and tables to this bapi.. so after completion GUI_UPLOAD , how to Pass this internal table into this BAPI strutures and tables for creating the GRANTS in the system.
Regrads,
Kumar.Execute the function module "BAPI_0035_GET_DETAIL" passing Grant number to get an idea about what needs to be passed into "BAPI_0035_CREATE".
-
How to pass input field value from one region to another ?
What I am trying to do :
I have one page with 1 region with one text field and an apply button and a report region.
I want to be able to enter a value in the text field, click on apply and exploit this value in the source of the report region.
Of course, I want the the value in the text field remains after the click on the apply button.
What I cannot control with my try :
1 the text field is always wiped off after the push on the apply button, no matter what kind of "do not clear the cache" setting I have found, and no matter the "take this value for this parameter" setting I have done every where I have found it.
2 (but I think that this is related to 1) I cannot get working the conditional display of the report region on a NOT NULL condition of the above region text field.
I have tried the code of the page 23 of the customertracking demo packaged apps, but the button properties shown are not the same than what I can find in my apps : I guess this is a difference in apex version normal feature.
I think that what I am trying to achieve must be terribly simple but I cannot see it.Ok I have found out that it was now an interactive report that has to be done for this kind of situation, and that in my case, I needed to enable a detailled report.
Now I have another question : one of my field is rich text : how to render it in my detailled report ? -
Disabling input text component on checking the checkbox
Hi,
I have created INPUT TEXT and CHECKBOX dynamically by the following code.
List<UIComponent> children;
children = pgl.getChildren();
RichPanelGroupLayout pgll;
pgll = new RichPanelGroupLayout();
pgll.setLayout("horizontal");
List<UIComponent> children1;
children1 = pgll.getChildren();
RichInputText it;
it = new RichInputText();
UIComponent cb = new RichSelectBooleanCheckbox();
children1.add(it);
children1.add(cb);
children.add(pgll);
Now on checking the checkbox i shud disable the inputtext box.. can someone help me out in getting it?In the valueChangeListener of the checkbox, set the disable propoerty of the input box to true and call the partial trigger on the input box using AdfFacesContext.addpartialTarget("idoftheinputbox"). Also set the partial submit of the checkbox to true.
-
Why do I get html tags with my Flash forms CGI-mailed input text?
I'm using a Flash form to send input text to a cgi page
(using load variable). The following text is on the CGI page.
To: [email protected]
From: [email]
Errors-To: [email protected]
Subject: [subject]
Type of Project: [subject]
Deadline: [details]
Name: [realname]
e-mail: [email]
Phone: [phone]
e-mails me results like this...
Type of Project: <TEXTFORMAT LEADING="2"><P
ALIGN="LEFT"><FONT
FACE="_sans" SIZE="12" COLOR="#000000"
LETTERSPACING="0" KERNING="0">by
george</FONT></P></TEXTFORMAT>
Deadline: <TEXTFORMAT LEADING="2"><P
ALIGN="LEFT"><FONT
FACE="_sans" SIZE="12" COLOR="#000000"
LETTERSPACING="0"
KERNING="0"></FONT></P></TEXTFORMAT><TEXTFORMAT
LEADING="2"><P ALIGN="LEFT"><FONT FACE="_sans"
SIZE="12" COLOR="#000000" LETTERSPACING="0"
KERNING="0">it!!!</FONT></P></TEXTFORMAT>
Name:
e-mail: <TEXTFORMAT LEADING="2"><P
ALIGN="LEFT"><FONT
FACE="_sans" SIZE="12" COLOR="#000000"
LETTERSPACING="0"
KERNING="0">[email protected]</FONT></P></TEXTFORMAT>
Phone: <TEXTFORMAT LEADING="2"><P
ALIGN="LEFT"><FONT
FACE="_sans" SIZE="12" COLOR="#000000"
LETTERSPACING="0" KERNING="0">I've
got</FONT></P></TEXTFORMAT>
anyone know how I can get it to drop all the extraneous html
crap? - I just want the input text items.
Also I can't figure out how to do a flash pulldown list as a
form element... all tutorials I find on the sbject are for Flash 5
and say to use Smartclips from the common librarirs tab - but there
are no "smartclips" in my Flash CS3. I see other things in
components (menu, list) - but cannot figure out how to add my items
to the list.is there some way I could use an "expression" to subtract the
unwanted text strings from the info being passed by the variables?
If so, does anyone have an example of the context I would used to
subtract 2 strings from that info...
this string of html tags appears before the passed input text
TEXTFORMAT LEADING="2"><P ALIGN="LEFT"><FONT
FACE="_sans" SIZE="12" COLOR="#000000"
LETTERSPACING="0" KERNING="0">
and this appears affter it...
</FONT></P></TEXTFORMAT>
it's always the same. -
Updating text data and master data
Hello everyone,
I'm new to the ABAP language and I'm having some trouble with updating and inserting data in my tables. The problem goes like this :
1) To modify an existing line in my table, I need only to update a text data. So I specify 'T' as tab class in the RSDMD_WRITE_ATTRIBUTES_TEXTS function. The update works fine.
2) To add a new line to my table, I have to deal with both master data and text data. So I have another RSDMD_WRITE_ATTRIBUTES_TEXTS function this time with 'M' as tab class. I have put this function before the one with 'T' as tab class.
My problem is that the add a new line doesn't work. I'd be very grateful if anyone could give me some hint. Thank you very much for your help.
Best Regards,
Dimple
Here's my code :
clear : t_wa_tproginv, t_wa_mproginv, l_wa_mproginv, l_wa_mproginv.
l_form_fields-id = 'ZPROGINV'.
read table gt_form_fields from l_form_fields into l_form_fields.
l_wa_tproginv-/BIC/ZCPROGINV = l_form_fields-frm_val.
l_wa_mproginv-/BIC/ZCPROGINV = l_form_fields-frm_val.
l_form_fields-id = 'ZEXAUTO'.
read table gt_form_fields from l_form_fields into l_form_fields.
l_wa_tproginv-APPR_YEAR = l_form_fields-frm_val.
l_wa_mproginv-APPR_YEAR = l_form_fields-frm_val.
l_wa_mproginv-OBJVERS = 'A'.
l_form_fields-id = 'ZLANGU'.
read table gt_form_fields from l_form_fields into l_form_fields.
l_wa_tproginv-LANGU = l_form_fields-frm_val.
l_form_fields-id = 'ZPROGINV_TC'.
read table gt_form_fields from l_form_fields into l_form_fields.
l_wa_tproginv-TXTSH = l_form_fields-frm_val.
l_form_fields-id = 'ZPROGINV_TL'.
read table gt_form_fields from l_form_fields into l_form_fields.
l_wa_tproginv-TXTLG = l_form_fields-frm_val.
append l_wa_tproginv to t_wa_tproginv.
append l_wa_mproginv to t_wa_mproginv.
call function 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
exporting
i_iobjnm = 'ZCPROGINV'
i_tabclass = 'M'
tables
i_t_table = t_wa_mproginv
exceptions
attribute_name_error = 1
iobj_not_found = 2
generate_program_error = 3
others = 4.
if sy-subrc <> 0.
lt_err_msg-condition = 'rsdmdmzproginv'. read table gt_err_msgs from lt_err_msg into lt_err_msg.
concatenate sy-msgid '/' sy-msgty '/' sy-msgno '/' sy-msgv1 '/' sy-msgv2 '/' sy-msgv2 '/' sy-msgv3 '/' sy-msgv4 into lt_err_msg-message.
page->messages->add_message(
condition = lt_err_msg-condition
message = lt_err_msg-message
severity = lt_err_msg-severity ).
endif.
call function 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
exporting
i_iobjnm = 'ZCPROGINV'
i_tabclass = 'T'
tables
i_t_table = t_wa_tproginv
exceptions
attribute_name_error = 1
iobj_not_found = 2
generate_program_error = 3
others = 4.
if sy-subrc <> 0.
lt_err_msg-condition = 'rsdmdmzproginv'. read table gt_err_msgs from lt_err_msg into lt_err_msg.
concatenate sy-msgid '/' sy-msgty '/' sy-msgno '/' sy-msgv1 '/' sy-msgv2 '/' sy-msgv2 '/' sy-msgv3 '/' sy-msgv4 into lt_err_msg-message.
page->messages->add_message(
condition = lt_err_msg-condition
message = lt_err_msg-message
severity = lt_err_msg-severity ).
endif.
call function 'RSDMD_MD_ACTIVATE'
exporting
i_chabasnm = 'ZCPROGINV'.
call function 'RSDDS_AGGREGATES_MAINTAIN'
exporting
i_protnumber = 'ZCPROGINV'.
if sy-subrc <> 0.
lt_err_msg-condition = 'rsdmdtzproginvchgrun'. read table gt_err_msgs from lt_err_msg into lt_err_msg.
concatenate sy-msgid '/' sy-msgty '/' sy-msgno '/' sy-msgv1 '/' sy-msgv2 '/' sy-msgv2 '/' sy-msgv3 '/' sy-msgv4 into lt_err_msg-message.
page->messages->add_message(
condition = lt_err_msg-condition
message = lt_err_msg-message
severity = lt_err_msg-severity ).
endif.I found the prob. It was elsewhere. Thx anyway.
-
The web page loading (browsing) sequence is
www.abc.com/main.html > www.abc.com/subpage1.html > www.abc.com/subpage2.html
QUESTION:
How to pass text data which is in a dynamic textbox ("I want to fly") from www.abc.com/main.html to www.abc.com/subpage2.htmlYou are correct. The js function and externalinterface class. are not a problem. But how could I add (pass on) the current stiring to the next URL?
Because in my case the sring varies all the time.
www.abc.com/main/?john=111
www.abc.com/main/?peter=222
www.abc.com/main/?mathew=333
www.abc.com/main/?paul=444
What I want is;
www.abc.com/main/?peter=222 > www.abc.com/sub/?peter=222 > www.abc.com/supersub?peter=222
If you suggestion works please could you show me a code to do the following
yourURLstring = "www.xxxx.com?yourquerystringvariable="+yourquerystringvalue; -
Input data into dynamic calc in Planning forms
Hi guys,
Have someone tried to combine these two requirements:
1. to have upper level members dynamic calc
2. to give users the ability to input data into those upper level members through Planning forms.
I need to do that in order to pass inputted values into HBR, and allocate those values to the leaf level across multiple dimensions. I need those members dynamic calc because otherwise I would need to aggregate data across 7 dimensions and that takes too long. Those allocations are suposed to happen constantly and are the main purpose of application.
I know you can have dummy stored members that correspond the uper level dynamic members, but then the user will have input forms without current data and will be required to check reports/forms with dynamic calc members prior to updating data.
I wonder if it is a realistic task to change jsp files that generate those forms, so that data can be inputed into the form, but instead of passing it to Essbase cube to send it to relational database.
P.S.
This is related to the thread I opened about optimizing recalculation time:
Recalculatiion takes much longer than initial calculation
I received a lot of valuable advices that would definitely work in other situations, but in my case they seem to contradict either user concurrent access or performance requirements.
Thanks a lot!
DmitryHi Glenn,
I think i found a workaround for this, or may be i am missing something. I will replicate my hierarchies so that one hierarchy will have uper level stored members, and another dynamic calc. Once user loads the form it will run on-load script that will copy data from corresponding dynamic calc to stored slice. The updated data will be alocated to the leaf level, but will never be aggregated. Since reporting is done from ASO cube i only care about the leaf level and current selection in the form.
Thanks! -
Hello everybody,
I am designing a general purpose block in system generator. I pass the user parameters to the block through masking it. Some user parameters can change the block configuration. The input port data type, width and rate can also affect the block configuration.
The problem is that these values (input port data type, width and rate) are subject to change. So I should read them dynamically, then change the block configuration through programming the "Initialization Commands" field. But unfortunately there is no straight way to read the input port information.
There are some methods in for example the "Black Box". these are:
input_width = this_block.port('din').width;
input_rate = this_block.port('din').rate;
But these methods are not applicable to a masked subsystem.
I have tried other ways also. You can find them below. None of them worked.
Does anybody know how can I solve this problem?
Other ways I tried:
1)
design_name([],[],[],'compile')
q=get_param(gcb,'PortHandles');
get_param(q.Inport,'CompiledPortDataType')
get_param(q.Inport,'CompiledPortWidth')
get_param(q.Inport,'CompiledPortDimensions')
design_name([],[],[],'term')
2)
ssGetInputPortDataType
3)
ts = Simulink.Block.getSampleTimes([gcb '/Input'])
Today we rely on Simulink to perform parameterization of your designs in two ways:
Parameterizable Subsystems and Blocks : Parameters themselves can be MATLAB expressions that need to be evaluated for which we need the MATLAB interpreter
The very useful Rate and Type propagation or Simulink compilation that allows us to specify types & rates in one location that gets systematically propagated to all.
To truly make the HDL Netlist that is generated from SysGen parameterizable, we would have to implement some of this capability in the HDL netlist itself by:
Using Generics(VHDL) or Parameters(Verilog) - We would have to capture the bit width(type) propagation through levels of hierarchies and finally parameterize the IP itself based on this value
Since IP itself does not have this capability through generics, we would have to package a separate tcl script that updates the IP parameterization appropriately in response to top level parameters(or GUI parameters)
Interpreting MATLAB expressions and translating them into VHDL/Verilog expressions (alternatively tcl expressions of IP). In simulink, mask parameters can be passed from one level to the next. Also parameterization of a block can be composed of Matlab expressions using variables from ancestor masks & the MATLAB interpreter – so we will need to somehow capture that as well.
-
Subscript & Superscript in dynamic and input text field in Flash
Yes, <sub> & <sup> tags are not supported by
Flash but you can
use Subscript & Superscript in dynamic and input text
field in Flash:
Download & install Subscript & Superscript fonts
from
http://www.subscriptfont.com
or
http://www.superscriptfont.com
You will need to restart Flash software after installed
fonts.
Create a dynamic text field with Arial font embeded. Set the
HTML property to true.
Create a dynamic text field with Subscript font embeded.
Create a dynamic text field with Superscript font embeded.
Use HTML tag to set text to subscript or superscript like
below:
Some text<font face="Superscript">©</font>
If you are using ActionScript to test the htmlText, use
script like below:
my_txt.htmlText = "Some text<font
face='Superscript'>TM</font>";
They are better than CG since it goes lower than the baseline
and it's real subscript..Hi Nirnalatha,
I have newly joined this forum and while going through the
posts I came across your post which I thought I could help out. But
I think I am too late for the reply.
I am also into Flashlite development couple of months from
now. Coming to your questions:
1. Textbox problem: I am surprised to know that E70 mobiles
(Device central list has E70-1 only) does not show input text box
when cursor is in input box. Anyways its a good thing that you dont
get an additonal input box. Like all J2ME applications you will be
able to type the text inline. Infact we had reverse problem where I
was told to create inline edit input box instead of flashlite input
box. I think this is the mobile setting. Check the device features
in the Adobe Device Central under Flash - Standalone player - Text
and Fonts features. It will be mentioned whether inline text is
allowed or not.
2. Soft keys issues: You need to use
fscommand2("SetSoftKeys", "Previous", "Next");
and use a key listener in order to override the Mobile
Softkey commands. Check out the flashlite help which clearly
explains this.
Hope I have given youa way to solve ur problem. -
How Can i send the data entered in Input text fields to e-mail?
Iam Jennifer, Iam having a doubt in Flash, I hope that you
are going to solve my problem, Iam taking 3 Static text fields as
Name, Age and Country and besides each and every static text fields
i have taken 3 input text fields with different instance names,
when i enter my Name, Age and Country details in the input text
fields and after entering those details if user clicks the submit
button the data should be send to some mail address, is it possible
Im not so good at action script, but i hope that any one can
help me...
Iam attaching the action script code also, please find the
attachment below, the actions are given to button.
Attach Code
Btn.onPress = function ()
mail_lv = new LoadVars();
mail_lv.dummy1 = "";
mail_lv.subject = "Details";
mail_lv.message = "hi";
mail_lv.username = "name_txt".text;
mail_lv.age = "age_txt".text;
mail_lv.country = "country_txt".text;
mail_lv.onLoad = function ()
trace("Sent successfully...");
trace("mail_lv.subject = " + mail_lv.subject);
trace("mail_lv.message = " + mail_lv.message);
mail_lv.send("mailto:[email protected]", "_blank");The names of your variables, "name_txt", for instance, should
NOT have quotes around them. Use:
mail_lv.username = name_txt.text;
mail_lv.age = age_txt.text;
mail_lv.country = country_txt.text; -
How to populate data from dynamic drop down list to the text field
Hi,
I tried to populate data from dynamic drop down list to city field. I would like to concat data from drop down list.When selecting add button to add the item and select item from drop down list, data should be displayed in the text field. However, Please help. I spent alot of time to make it works I am not successful.
Please see the link below.
https://acrobat.com/#d=SCPS0eVi6yz13ENV0cnUdw
Thanks for your help
CindyHi Rosalin,
Loop the hidden table, get the values and populate drop down in each iteration.
DropDownList1.addItem("Text","Value");
You can use one more solution for this scenario. If it is a matter of 2,3 dropdowns, put three dropDowns in the form layout and give seperate static data binding to them. At run time make the dropDowns hide/visible as per the requirement.
Hope this helps.
Thanks & Regards,
Sanoosh -
Hi!!!Can anyone suggest how to change data block dynamically using input
Hi all,
Here is my requirement...I have a datablock which has 7 columns, these coloumn represent dates. I have a header in which I will input the date[b] from and to ( this is restricted to not more than one month). Now when I enter these 2 date fields in header, My 7 coloumn data block need to be changed to 'n' number of coloumn( which is less than 1 month) as per input fields. Can I do this, if we can then please give me the guide lines.
Thank youit is a good solution Jeneesh, because it is the only one.
You cannot create items dynamically at runtime, so you have to create them in your form at designtime and show and hide them. -
How to insert a date picker input text field in a JSF Jsp page
Hi,
I have to develop an application using generic facets, unfortunately I am not supposed to use ADF Faces components given by Oracle.
Now my requirement is, on JSP page an input text field which holds a DATE value is required, it should also have a Date Picker Calendar adjacent to it.
Could you pls shed some light on this issue and help me out.
Thanks
~Siva(ji)<HTML>
<script language="JavaScript" type="text/javascript">
<!--
var pUpWidthc = 300; //Change the pUpWidthc to your requirements.
var scrAvailc = 400; //Change to your available screen width. You see in
//this eBooks' middle frame, the frame width is
//equal to 410 . So whether your using frames or
//or a full 800 pixel screen, you must calculate
//your available screen width.
var PopUpC = document.getElementById("pUpc");
document.write('<div id="pUpc" style="visibility:hidden;z-index:4;width:'+pUpWidthc+';position:absolute;"></div>');
function cstmPup(objC,c){
popUpC = document.getElementById("pUpc");
popUpC.innerHTML = c.innerHTML
popUpC.style.left = getPos(objC,"Left");
var scrNeedc = getPos(objC,"Left") + pUpWidthc;
if (scrNeedc > scrAvailc){
//The number 10 below is an extra offset x value applied when the
//definitional popup box positions beyond your screen width. You
//can change this number to fine tune your "beyond screenwidth" positioning.
var scrOffsetC = getPos(objC,"Left") + pUpWidthc - (scrAvailc);
popUpC.style.left = getPos(objC,"Left") - (scrOffsetC - 0);
popUpC.style.top = getPos(objC,"Top") + objC.offsetHeight;
popUpC.style.visibility = 'visible';
fill();
function fill()
var noOfRows=7,noOfCols=7,i=0,j=0,day=1,x;
var d1=FirstDayOfWeek(7,2008);
//40
for(i=1;i<noOfRows;i++)
x=document.getElementById('myTable').insertRow(i);
for(j=0;j<noOfCols;j++)
var y=x.insertCell(j);
if( ( i==1 && j<d1))
y.innerHTML="";
else if(day<=DaysInMonth(7,2008)){
y.innerHTML=day;
day++;
//document.write(FirstDayOfWeek(7,2008));
function FirstDayOfWeek(m,y)
var i;
var dow = 6;
//document.write("Hello");
for (i=1583; i<y; i++)
dow += (LeapYear(i)) ? 2 : 1;
for (i=1; i<m; i++)
dow += DaysInMonth(i,y);
return dow % 7;
function DaysInMonth(m,y)
// m is the month number (1,2,3,...12), y is the year number (four digits)
switch (m)
case 1:
case 3:
case 5:
case 7:
case 8:
case 10:
case 12: return 31;
case 2: if (LeapYear(y))
return 29;
else
return 28;
default: return 30;
function LeapYear(y)
return (y % 4==0) && ((y % 100!=0) || (y % 400==0));
function getPos(objC,sPos){
var iPos = 0;
while (objC != null) {
iPos += objC["offset" + sPos];
objC = objC.offsetParent;}
return iPos;
function hPopUpc(){
popUpC = document.getElementById("pUpc");
popUpC.style.visibility = 'hidden';
//-->
</script>
<BODY
<button id="c1" onclick="cstmPup(c1,pUpCstm)">Custom PopUp</button>
<'div' id="pUpCstm" style="display:none;">
<'div' id="myid" align="left" style=" width:100%; height:100%; background:#cccccb; border:1px solid black; border-top:1px solid white; border-left:1px solid white; padding:10px; font:normal 10pt tahoma; padding-left:18px "> <b>Rich Message Boxes</b>
<hr size="1" style="border:1px solid black;">
<div style="width:220px; font-family:tahoma; font-size:80%; line-height:1.5em"><br>
<table border ="1" id="myTable">
<TR>
<TD> SUN </TD>
<TD> MON </TD>
<TD> TUE </TD>
<TD> WED </TD>
<TD> THU </TD>
<TD> FRI </TD>
<TD> SAT </TD>
</TR>
</table>
<br><br>
</div>
<br>
<div>
<button tabindex="-1" onclick="hPopUpc()" style="border:1px solid black; border-left:1px solid white; border-top:1px solid white; background:#cccccc ">Close Message</button>
</div>
<?BODY
</HTML>
Message was edited by:
mchepuri
Message was edited by:
mchepuri
Message was edited by:
mchepuri -
Display current date and time in a Input text field.
Hi,
I am new in ADF trying to convert the Oracle Forms to ADF. I have questions how can I display the current date & time in the input text filed when ever the page opens .
Thanks in advance.Hi,
Check followings will useful
current date setting
Current Date
Maybe you are looking for
-
I keep getting messages that indicate that I will lose my 20 GB complimentary storage. "Your complimentary iCloud storage upgrade expires on September 30, 2013." When I go to my icloud settings - it shows that I am on the 20GB plan for $40. What give
-
Spinning ball all the time? new final cut?
Hi there, After spend 300 dollars in the brand new final cut X, i notice that i also have a free spinning colourfull beachball?! yes in the previous version i never add so many hang ups and so time waiting for some operations, i have, as u can say th
-
Want to add Custom text after Product Branding Image for application
Hi Can we add any text after Product Branding Image for application By default it will show the responsibility function name My requirement is after company logo I want to add Text at the top of application with center align Need suggestions Regards
-
Caculated column in a Create Table statement
This is my create table statement: CREATE TABLE DTPartInv ( partinv_partnbr VARCHAR2(10) NOT NULL, partinv_prodname VARCHAR2(25), partinv_desc VARCHAR2(25), partinv_manufact VARCHAR2(25), partinv_instock INTEGER NOT NULL, partinv_category VARCHAR2(20
-
I just bought a mini from Ebay for my daughter and after just 2 months, the menu button is not responding. We have tried all of the reset option available online however, none has fixed the problem. Any ideas??/