Passing variable from html to flash

Hi I have built a flash movie with buttons...depending on
which button is clicked it loads a different flash movie due to
variable setting. I am able to set and call the variable s in flash
fine
But now i have an html page that needs to blend with this
flash...So i created buttons on my html page to look like the
flash...But when i click a certain button i want it to know the
variable going into the flashpage and load correct movie...not just
go to the beginning of my flash movie then user will have to choose
the button again...
How can i do this?
thank you in advance
reno

well, between the post to forum and this link below i got
this to work for me
Just needed to know about the javascript....along with
putting the value/variable in url as posted..thanks
http://noscope.com/journal/2003/12/query_string
thanks for replying with suggestions!
reno

Similar Messages

Best way to pass vars from html into flash?

I've read a variety of pages that describe how to pass a variable into a flash movie (AS3, player = v9) from the html in which it is embedded. This page describes AS3 but neglects to mention what to do with the object and embed tags in the noscript section. Furthermore, I'm not sure the javascript I see generated in my page looks like the example there (the js in my page doesn't check AC_FL_RunContenta against zero). This page is quite long and appears to deal mostly with AS1 and AS2 approaches which I have used before and neglects entirely the newish javascript approach which appears to be used to embed flash these days (i.e., the javascript function AC_FL_RunContent).
I was wondering if someone could spell out the proper way to pass in a variable from HTML so that flash can see it in such a way that works even if javascript is disabled, in all browsers, etc., etc.
I've attached the HTML generated by the Flash IDE to this topic. Any help would be much appreciated.

You'll have to search for that concise and thorough list of steps or figure it out using the information you now have, which is sufficient to get it done. It's not that hard--add the FlashVars in the embedding code in the three places and use the various examples you have links to to add the code in the Flash file to access and use the FlashVars.
Your Flash will be embedded in a web page depending on the visitors settings... if they allow javascript then the javascript portion will be used. If they don't, then either the object or embed sections will be used depending on their browser.
As far as javascript changes go, don't sweat 'em until you have a problem... use whatever code your Flash-created html page creates to embed the file in the page.

Passing variables from php to flash and the opposite

Hi guys, im trying weeks now to solve this problem but nothing yet
If someone could just tell me how to pass variables from flash to php and the opposite i would be thankful!!! Please help!

I have recently had to learn this, so this may not be the best way but it worked for me
I suggest looking at the code below stripping out everything you don't need (e.g. the databse stuff) and just get a simple string going back and forward
have a go and post any problems here and I'll try and help
in flash i have
private function getBalanceAndXP():void
          var request:URLRequest = new URLRequest("utils.php");
          request.method = URLRequestMethod.POST;
          var variables:URLVariables = new URLVariables();
          variables.func = "getBalance";
          variables.fbid = userID;
          request.data = variables;
          var loader:URLLoader = new URLLoader();
          loader.dataFormat = URLLoaderDataFormat.VARIABLES;
          loader.addEventListener(Event.COMPLETE, onBalanceComplete);
          loader.load(request);
private function onBalanceComplete(e:Event):void
          var loader:URLLoader = e.target as URLLoader;
          loader.removeEventListener(Event.COMPLETE, onBalanceComplete);
          var variables:URLVariables = new URLVariables(loader.data);
          _balance = parseInt(variables.balance); // class variable
          _experience = parseInt(variables.experience); // class variable
public function setBalanceAndXP(balance:int, experience:int):void
            _balance = balance;
          _experience = experience;
          var request:URLRequest = new URLRequest("utils.php");
          request.method = URLRequestMethod.POST;
          var variables:URLVariables = new URLVariables();
          variables.func = "setBalance";
          variables.fbid = userID;
          variables.balance = _balance;
          variables.experience = _experience;
          request.data = variables;
          var loader:URLLoader = new URLLoader();
          loader.dataFormat = URLLoaderDataFormat.VARIABLES;
          loader.load(request);
and then I have my php file
<?php
$func = $_POST["func"];
$fbid = $_POST["fbid"];
$balance = $_POST["balance"];
$experience = $_POST["experience"];
$numVariables = 0;
$link = mysql_connect("localhost","username","password");
mysql_select_db("databaseName");
if ($func == "getBalance")
          getBalance($fbid);
else if ($func == "setBalance")
          setBalance($fbid, $balance, $experience);
mysql_close($link);
function getBalance($fbid)
          $query = "SELECT balance, experience FROM tableName WHERE fbid = '".$fbid."'";
          $result = mysql_query($query);
          $row = mysql_fetch_row($result);
          writeVariable("balance", $row[0]);
          writeVariable("experience", $row[1]);
function setBalance($fbid, $balance, $experience)
          $query = "UPDATE tableName SET balance = ".$balance.", experience = ".$experience." WHERE fbid ='".$fbid."'";
          mysql_query($query);
function writeVariable( $name, $value )
          global $numVariables;
          if ( $numVariables > 0 )
                    echo "&";
          echo $name . "=" . urlencode($value);
          $numVariables++;
?>

How to pass a variable from HTML to Flash

I have built my flash ad banner in Flash 9 and now want the
HTML code to pass the url over to the flash movie that it should
jump to when clicked.
The info in the help file seems out of date for the latest
HTML template as it uses mainly JavaScript to get round IE's
dreadful embeding issue. So my problem is, how do I pass a variable
from the HTML to the actionScript specified int he Help file
(running on a full screen button) as shown below?
myButton_btn.onRelease = function() {
if (clickTAG.substr(0, 5) == "http:") {
getURL(clickTAG);
via the html code now used by Flash 9 which is like this:

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Advert_long</title>
<script language="javascript"> AC_FL_RunContent = 0;
</script>
<script language="javascript"> DetectFlashVer = 0;
</script>
<script src="AC_RunActiveContent.js"
language="javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body bgcolor="#ffffff">



<script language="JavaScript" type="text/javascript">

</script>
<noscript>
// Provide alternate content for browsers that do not support
scripting
// or for those that have scripting disabled.
Alternate HTML content should be placed here. This content
requires the Adobe Flash Player.
<a href="
http://www.macromedia.com/go/getflash/">Get
Flash</a>
</noscript>
</body>
</html>

You should use SWFObject to embed your Flash. Not only does
it make
embedding more straightforward, it makes passing query
parameters very easy.
Check out:
http://code.google.com/p/swfobject/
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

How to pass a variable from HTML to Flash 9

I have built my flash ad banner in Flash 9 and now want the
HTML code to pass the url over to the flash movie that it should
jump to when clicked.
The info in the help file seems out of date for the latest
HTML template as it uses mainly JavaScript to get round IE's
dreadful embeding issue. So my problem is, how do I pass a variable
from the HTML to the actionScript specified int he Help file
(running on a full screen button) as shown below?
myButton_btn.onRelease = function() {
if (clickTAG.substr(0, 5) == "http:") {
getURL(clickTAG);
via the html code now used by Flash 9 which is like this:

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Advert_long</title>
<script language="javascript"> AC_FL_RunContent = 0;
</script>
<script language="javascript"> DetectFlashVer = 0;
</script>
<script src="AC_RunActiveContent.js"
language="javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body bgcolor="#ffffff">



<script language="JavaScript" type="text/javascript">

</script>
<noscript>
// Provide alternate content for browsers that do not
support scripting
// or for those that have scripting disabled.
Alternate HTML content should be placed here. This content
requires the Adobe Flash Player.
<a href="
http://www.macromedia.com/go/getflash/">Get
Flash</a>
</noscript>
</body>
</html>

You should use SWFObject to embed your Flash. Not only does
it make
embedding more straightforward, it makes passing query
parameters very easy.
Check out:
http://code.google.com/p/swfobject/
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Passing variables from PHP to Flash

I have a contact form that works. The user enters their info,
hits submit, and their info is emailed to me. I need to figure out
how to have the PHP script send back a confirmation that the email
was actually sent. I can't get the php to echo just a "yes" or
"no". Here is what I have so far:
Flash code to bring in PHP variable to notify user if mail
has been sent or not:
function receive_response(e:Event):void
var loader:URLLoader = URLLoader(e.target);
var email_status = new URLVariables(loader.data).success;
if(email_status == "yes")
status_txt.text = "Success! Your message was sent.";
timer = new Timer(500);
timer.addEventListener(TimerEvent.TIMER, on_timer);
timer.start();
else
status_txt.text = "Send failed! Please email or call us";
and here is my entire PHP Code. The code in bold at the bottom
is where it is supposed to pass the "yes" or "no" as the variable
success
<<meta http-equiv="content-type"
content="text/html;charset=utf-8">
<?php
// Create local PHP variables from the info the user gave in
the Flash form
$senderName = $_POST['userName'];
$senderEmail = $_POST['userEmail'];
$senderMessage = $_POST['userMsg'];
// Strip slashes on the Local variables
$senderName = stripslashes($senderName);
$senderEmail = stripslashes($senderEmail);
$senderMessage = stripslashes($senderMessage);
$to = "info@*******.com";
// change this to reflect your site
$from = "contact@*********.com";
$subject = "Contact from ***********.com";
//Begin HTML Email Message
$message = <<<EOF
<html>
<body bgcolor="#FFFFFF">
<b>Name</b> = $senderName<br /><br />
<b>Email</b> = <a
href="mailto:$senderEmail">$senderEmail</a><br
/><br />
<b>Message</b> = $senderMessage<br />
</body>
</html>
EOF;
//end of message
$headers = "From: $from\r\n";
$headers .= "Content-type: text/html\r\n";
$to = "$to";
if (mail($to, $subject, $message, $headers))
echo “success=yes”;
else
echo “success=no”;
exit();
?>
Thanks

I have a contact form that works. The user enters their info,
hits submit, and their info is emailed to me. I need to figure out
how to have the PHP script send back a confirmation that the email
was actually sent. I can't get the php to echo just a "yes" or
"no". Here is what I have so far:
Flash code to bring in PHP variable to notify user if mail
has been sent or not:
function receive_response(e:Event):void
var loader:URLLoader = URLLoader(e.target);
var email_status = new URLVariables(loader.data).success;
if(email_status == "yes")
status_txt.text = "Success! Your message was sent.";
timer = new Timer(500);
timer.addEventListener(TimerEvent.TIMER, on_timer);
timer.start();
else
status_txt.text = "Send failed! Please email or call us";
and here is my entire PHP Code. The code in bold at the bottom
is where it is supposed to pass the "yes" or "no" as the variable
success
<<meta http-equiv="content-type"
content="text/html;charset=utf-8">
<?php
// Create local PHP variables from the info the user gave in
the Flash form
$senderName = $_POST['userName'];
$senderEmail = $_POST['userEmail'];
$senderMessage = $_POST['userMsg'];
// Strip slashes on the Local variables
$senderName = stripslashes($senderName);
$senderEmail = stripslashes($senderEmail);
$senderMessage = stripslashes($senderMessage);
$to = "info@*******.com";
// change this to reflect your site
$from = "contact@*********.com";
$subject = "Contact from ***********.com";
//Begin HTML Email Message
$message = <<<EOF
<html>
<body bgcolor="#FFFFFF">
<b>Name</b> = $senderName<br /><br />
<b>Email</b> = <a
href="mailto:$senderEmail">$senderEmail</a><br
/><br />
<b>Message</b> = $senderMessage<br />
</body>
</html>
EOF;
//end of message
$headers = "From: $from\r\n";
$headers .= "Content-type: text/html\r\n";
$to = "$to";
if (mail($to, $subject, $message, $headers))
echo “success=yes”;
else
echo “success=no”;
exit();
?>
Thanks

Passing dynamic variable from html to Flash

I know this is pretty simple but all that I have read doesn't make much sense to me. I have one swf calling another swf that I have embedded into an htnl. In other words just calling another html page in a seperate window.
In one.swf (runing in broswer) I use the below to call another html page passing the variable NewLessonArray. This contains an array of completed chapters.
// LOADING URL
var NewLessonCompleteArray:String = LessonCompleteArray.toString();
navigateToURL(new URLRequest("two/index.html?CurrentLessonInfo=<NewLessonCompleteArray>"), "_blank");
In the receiving swf I want to retrieve the passing parameters.
two.swf
// Getting the parameters passed
this.loaderInfo.parameters.toString()
All that is returned that I can see is object Object. But since I am passing on a address line into another swf embedded in a html page I am unable to determine that correct syntac for retrieving the information.
Any suggestions? This has got to be pretty simple... I think.
THANKS

What you are trying to do is not extremely difficult to do, but it is not something I would consider as being simple. With Andrei's approach you should be able to take the url String and dissect the parameters from it using String methods, like split().
As for the loaderInfo end of things, you are not passing the parameters to the swf file, you are passing them to the html page. So the loaderInfo won't have any info for you regarding the url parameters. The loadInfo would typically get parameters via the FlashVars parameters passed in in the html's swf embedding code.
Here are some other solutions that you might consider. I have not dealt with these myself, they are merely in my collection of useful info, so you might have to experiment to get them working. One is a link to a class-based approach and the other is an approach that use swfObject embedding to dynamically add the parameters as FlashVars to the embedding code....
http://mikethenderson.com/2009/02/as3-return-query-string-value-version-2/#more-105
OR
In your HTML:
var flashvars = {};
if (swfobject.getQueryParamValue("aParameter")) {
flashvars.param = swfobject.getQueryParamValue("aParameter");
swfobject.embedSWF("myMovie.swf", "myContent", "550", "400", "9.0.0", "", flashvars);
And the param variable will be available as a FlashVar to your movie:
var theParam = loaderInfo.parameters.param;

Can't receive variables from HTML to Flash in AS3 passed via URL (not Flashvars)

hey all,
can't seem to get AS3 to recognize variables passed via URL
(not Flashvars). i can get vars passed with Flashvars in the
javascript but I don't want to use that method. i'm simply
extending the .swf call with .swf?var=123 in the embed and on the
AS3 side i'm calling loaderInfo.parameters.var
thought this would work but doesn't. what am i doing wrong?
HTML:
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0"
width="1024" height="768" id="main" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="false" />
<param name="movie" value="main.swf?var=123"
/><param name="quality" value="best" /><param
name="bgcolor" value="#ffffff" /> <embed
src="main.swf?var=123" quality="best" bgcolor="#ffffff"
width="1024" height="768" name="main" align="middle"
allowScriptAccess="sameDomain" allowFullScreen="false"
type="application/x-shockwave-flash" pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
AS:
t = new TextField();
t.text = String(loaderInfo.parameters.var);
thx in adv.
michael

appreciate you were going for brevity, but i think the
answer's going to be hidden either in your complete html code or
your complete AS code. without seeing this i can only keep
guessing.
that said, my latest guess is that you're not passing your
variable within the AC_FL_RunContent function. there are two
properties set in this function - src and movie, which contain your
movie name, to which you can add any parameters you wish to pass.
eg.
'src', 'main?var=123',
'movie', 'main?var=123',
where main is the name of your swf and var the name of the
parameter you wish to pass.
if this function fails - if javascript isn't available in the
browser, for example, or AC_RunActiveContent.js is missing, then
the <object> tag you described is used. (this object tag is
sitting inside a <noscript> tag.)

Passing variable from php into flash, help please

Here are what I'm having:
<?PHP
$testVal = "This is a test";
$test = urlencode($testVal);
$out = "test=". $testVal;
echo $out;
?>
// and this is my flash file
function getData() {
// Prepare request
var urlReq:URLRequest=new URLRequest("http://localhost/test.php");
urlReq.method=URLRequestMethod.GET;
var loader:URLLoader = new URLLoader();
loader.dataFormat=URLLoaderDataFormat.VARIABLES;
loader.addEventListener(Event.COMPLETE, completeHandler);
loader.load(urlReq);
function completeHandler(evt:Event) {
var vars:URLVariables = URLVariables(evt.target.data);
trace(" TEST = ", vars.test);
trace(" TEST = ", unescape(vars.toString()));
// and below is the ouput
TEST = undefined
TEST = test=This is a test
I've tried with several different ways to get ONLY the value of the variable - that means I only want to have "This is a test" returned, but I either got "undefined" or the whole thing "test=This is a test", instead.
I'm new to Flash and PHP. Please help.
Thanks

There's no need to write any fake variables out, Flash does not need that. OK, here's a simple PHP script like yours - I called it test.php
<?PHP
     $testVal = "This is a test";
     $out = "test=". $testVal;
     echo $out;
?>
And the AS to call it:
var myLoader:URLLoader = new URLLoader();
myLoader.dataFormat = URLLoaderDataFormat.VARIABLES;
myLoader.load(new URLRequest("http://www.mydomain.com/test.php"));
myLoader.addEventListener(Event.COMPLETE, dataLoaded, false, 0, true);
function dataLoaded(e:Event){
    trace( e.target.data.test);
You will see 'This is a test' traced to the output window.
HTH

Can't pass parameter from HTML form of multipart/form-dta type to JSP

I am using request.getParameter(passed variable name) to pass data from HTML form to JSP with no problem. WHen I try to pass data from HTML form of multipart/form-dta type to JSP as following:
< form enctype="multipart/form-data" name="theForm" method="post" ACTION="http://titan.ssd.loral.com:7778/ifs/jsp-bin/ifs-cts/stringsecond.jsp">
The passed value is null. Why?
How can I pass data successfully from this form to JSP?
How can I pass data from JavaScript to JSP?
Thank you

I am using request.getParameter(passed variable name)
to pass data from HTML form to JSP with no problem.
WHen I try to pass data from HTML form of
multipart/form-dta type to JSP as following:
< form enctype="multipart/form-data" name="theForm"
method="post"
ACTION="http://titan.ssd.loral.com:7778/ifs/jsp-bin/if
-cts/stringsecond.jsp">
The passed value is null. Why?because the jsp most likely does not handling of POST parameters like this.
How can I pass data successfully from this form to
JSP?jsp's are not meant to read such amounts of data. this (= uploading) is a typical task for a specialized servlet. there you have full control over input and output. if you need to, you can still forward to a jsp after processing in the servlet.
How can I pass data from JavaScript to JSP???? i'm not sure what exactly you mean. normally you put it into an url and submit it.
robert

Passing variables from one swf to another

I am facing problem to pass variable from one swf to another.
I am using loadMovie to load another swf. how can I pass a variable
value to another swf. Can anyone help me plz? It is somewhat
urgent.
thanx in advance.

first of all:
this is the Flash Media Server and your problem is not
related to FMS....
second thing related to the "somewhat urgent" :
we, users on this forum, are not there to do your job... so
calm down otherwise no people will answer your question. This forum
is a free support forum that community of Flash developer use to
learn tricks and to solve problems.
Possibles solutions:
If the two swf are seperate you can use LocalConnection to
establish a connection between different swf.
If you load a second swf into the first one you can interact
like a standard movieClip(only if there from the same domain or if
you a policy file on the other server)
You can use SetVariable(via Javascript) to modify a root
variable on the other swf and check with an _root.onEnterFrame to
see if the variable had changed in the second swf.
* MovieClipLoader will do a better job, in your specify case,
than the loadMovie. Use the onLoadInit event to see when the swf is
really totaly loaded into the first one otherwise you will have
timing issues.
My final answer(lol) is the solution 2 with the
notice(*)

How to pass parameters from html to xacute query

hi experts,
I need to pass a variable from html to xacute query.i need the correct syntax for that .
Thanks in advance.
lokesh

Hi Lokesh,
I apologize if my message came off sounding rude - passing parameters to queries is fundamental to xMI, one of the basic concepts. I only meant that if you haven't had xMII training, you could benefit greatly
Kind Regards,
Diana Hoppe

Passing variables from AS3 to PHP

Hi there
I am having some trouble in passing variables from AS3 to PHP. I am using flash and php both in the same file [try.php].
I've stuck with this for two days.. Here's what I have done. Please help!!!
header.fla [Actionscript in the timeline]
stop();
import flash.events.Event;
import flash.display.Sprite;
import flash.net.*;
var url:String = "http://localhost/0000/try.php";
var req:URLRequest = new URLRequest(url);
var loader:URLLoader = new URLLoader();
var variables:URLVariables = new URLVariables();
send_btn.addEventListener(MouseEvent.CLICK, sendForm);
function sendForm(evt:MouseEvent):void
    // add the variables to our URLVariables
    variables.asd = "value";
    // send data via post
    req.method = URLRequestMethod.POST;
    req.data = variables;
    loader.dataFormat = URLLoaderDataFormat.TEXT;
    // add listener
    loader.addEventListener(Event.COMPLETE, onLoaded);
    loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
    //send data
    loader.load(req);
function onLoaded(evt:Event):void
    var result_data:String = String(loader.data);
    if (result_data)
        trace(result_data);
    else if (!result_data)
        trace("error");
function ioErrorHandler(event:IOErrorEvent):void
    trace("ioErrorHandler: " + event);
try.php
<body>
<object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="563" height="280">
<param name="movie" value="header.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />

<param name="expressinstall" value="../Scripts/expressInstall.swf" />


<object type="application/x-shockwave-flash" data="header.swf" width="563" height="280">
    
    <param name="quality" value="high" />
    <param name="wmode" value="opaque" />
    <param name="swfversion" value="6.0.65.0" />
    <param name="expressinstall" value="../Scripts/expressInstall.swf" />
    
    <div>
      <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
      <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
    </div>
    
</object>

</object>
<?php
if($_POST['asd'])
echo "value of var1 is <b>".$_POST['asd']."</b>";
else
echo "bad luck";
?>
</body>
BIG THANKS!!

the problem is nothing your showed.   did you see a security warning that you ignored?
to test, if that's the problem go here and adjust your security settings: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml
if that fails, upload your files to a server and confirm everything works. then start working on your local configuration.

OBIEE 11g How to pass variable from one prompt to another prompt in dashboard page.

How to pass variable from one prompt to another prompt in dashboard page.
I have two prompt in dashboard page as below.
Reporttype
prompt: values(Accounting, Operational) Note: values stored as
presentation variable and they are not coming from table.
Date prompt values (Account_date, Operation_date)
Note:values are coming from dim_date table.
Now the task is When user select First
Prompt value “Accounting” Then in the
second prompt should display only Accounting_dates , if user select “operational”
and it should display only operation_dates in second prompt.
In order to solve this issue I made the
first prompt “Reporttype” values(Accounting, Operational) as presentation
values (custom specific values) and default presentation value is accounting.
In second prompt Date are coming from
dim_date table and I selected Sql results as shown below.
SELECT case when '@{Reporttype}'='Accounting'
then "Dates (Receipts)"."Acct Year"
else "Dates (Receipts)"."Ops
Year" End FROM "Receipts"
Issue: Presentation variable value is not
changing in sql when user select “operation” and second prompt always shows
acct year in second prompt.
For testing pupose I kept this presentation
variable in text object of dashboard and values are changing there, but not in
second prompt sql.
Please suggest the solution.

You will want to use the MoveClipLoader class (using its loadClip() and addListener() methods) rather than loadMovie so that you can wait for the file to load before you try to access anything in it. You can create an empty movieclip to load the swf into, and in that way the loaded file can be targeted using the empty movieclip instance name.

Is it possible to pass variables from Tidal to the Peoplesoft run controls?

Does anyoen know
•1) Is it possible to pass variables from Tidal to the Peoplesoft run control page such as current date?
An example would be updating run control parameters for a PSQUERY.
•a) From date
•b) To date
•c) Business units
Thanks,
Jay

Edit the job - go to Run Controls Parameters tab - select the param you want in the Override column then click on the Variables button on the bottom and select the variable you want

Passing variable from html to flash

Similar Messages

Maybe you are looking for