Password Keeper would not show asterisks. Last attempt left

Suddenly my bb bold password keeper would not accept my password. I know i am entering it correctly. it doesnt show asterisk anymore which is explainable in forums but it would still not accept my password. on 8th attempt i entered "blackberry" and last attempt left. what should i go for. as my data is not backed up yet i am intending to back it up right now before i proceed further with the steps you will kindly suggest.
Thank you

Often users who have multiple numerals in their password will only press the ALT key for the first numeral and not those following, so for instance, if your password were "1234", you might have been pressing "Alt 1234" on the device, which makes the actual password to be "1ers".
Does that make sense? Does it sound familar to your usage?
So check the way you enter your password on the device... do you think you are entering multiple numbers but actually are not?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Loading Textual Data from HttpService Would Not Show Up on TextArea

Hi,
I have something fairly strange here that I have a little problem getting it to work. I am loading some data from XML and attempt to format it a little more on Actiosncript and print it out on the TextArea. For some reason, it would not show up, even though when I used Alert.show it does spit out the entire xml data set. Based on this, I know my data has been loaded correctly, but I am not sure why it is not showing up on my page.
Here is the code,
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
    <mx:states>
        <mx:State name="view">
          <mx:RemoveChild target="{intro}"/>
            <mx:AddChild relativeTo="{applicationcontrolbar1}" position="before">
                <mx:TextArea editable="false" id="viewText" width="450" height="279" text="{messageInfo}"/>
            </mx:AddChild>
        </mx:State>
    </mx:states>
    <mx:Script>
        <![CDATA[
            import mx.events.ItemClickEvent;
            import mx.controls.Alert;
            import mx.rpc.events.ResultEvent;
            import mx.rpc.events.FaultEvent;
            [Bindable]private var message:XMLList;
            [Bindable]private var messageInfo:XMLList;
            private var savedIndex:int = 99999;
   private function clickHandler(event:ItemClickEvent):void {
                if (event.index == savedIndex) {
                    //don't do a thing
                else {
                    savedIndex = event.index;
                      navigateToURL(new URLRequest("../"+ event.item.data));
            private function toggleButtonBar_itemClick(evt:ItemClickEvent):void {
                currentState = evt.item.data;
                if(evt.item.data == "view") view();
           private function view():void{
              currentState="view";
              userView.send();
           private function httpService_fault(evt:FaultEvent):void {
                var title:String = evt.type + " (" + evt.fault.faultCode + ")";
                var text:String = evt.fault.faultString;
                Alert.show("There is an error! Type " + title + " " + text);
           private function httpService_result(evt:ResultEvent):void {
                messageInfo = XML(evt.result).messages.message;
                Alert.show(messageInfo);
                message = XML(evt.result);
                var message_name:String = "";
                var message_phone:String = "";
    for each (var message:XML in messageInfo.messages.message) {
          viewText.text += "Name " + messageInfo.name + "\n";
          viewText.text += "Phone " + messageInfo.phone + "\n";
        ]]>
    </mx:Script>
<mx:HTTPService id="userView" url="messages.xml" resultFormat="e4x"
fault="httpService_fault(event);" result="httpService_result(event)" />
<mx:PhoneNumberValidator id="pnVal" source="{your_phone}" property="text"/>
<mx:EmailValidator id="emailVal" source="{your_email}" property="text"/>
    <mx:Array id="dp">
        <mx:Object data="view" label="View"/>
    </mx:Array>
    <mx:Panel id="panel" title="My Home" height="70%">
    <mx:TextArea id="intro" width="77%" height="100" borderStyle="none" paddingLeft="10" color="black">
            <mx:htmlText><![CDATA[Welcome to my page.]]></mx:htmlText>
        </mx:TextArea>
         <mx:ApplicationControlBar id="applicationcontrolbar1">
        <mx:ToggleButtonBar id="toggleButtonBar" color="#FFFFCC"
                dataProvider="{dp}"
                itemClick="toggleButtonBar_itemClick(event);" />
    </mx:ApplicationControlBar>
    </mx:Panel>
</mx:Application>
Note, there are other items in the array, but those are not relevant to the question of the topic here, and therefore I am not posting the code for those sections.
When I click on the View button, it does give me the correct state, but I get a blank box of textArea with no data when I know there is output from Alert.show in the view(). What have I missed?
Thanks for your help.

Thanks for the pointer. As a matter of fact, I found out that it is because of my xml nodes messing up, and that the text was displayed as white for someb reason. With a white background, of course I would not see a thing.
Thanks again.

The sleep/wake function would not show in general to turn it on. I have a Targus case but the function will not work. What's going on?

The sleep/wake function would not show in general to turn it on. I have a Targus case but the function will not work? The place it should be their is. Auto lock, Password lock, and Restrictions

Keirosform wrote:
The sleep/wake function would not show in general to turn it on.
Ther is no "sleep/wake" setting in Settings > General.
Auto lock, Password lock, and Restrictions
Yes, these are the only three settings..
I have a Targus case but the function will not work?
What function? It won't go to sleep?
Press the Power button on top. Does it sleep?

Change Password link is not showing up in MyAccount Page

Change Password link is not showing up in MyAccount Page, eventhough the line
<class name="PasswordPortalSetting"/> is not commented out in DisplayPortalSettings.xml
We are using custom Auth source and not using plumtree Auth source, Is this could be a reason?
Any help is appreciated.

I'm seeing the same thing as Simon, I changed the iOS device name in both places on an iOS device and the name in the Intune console is still "iPhone" which is really unhelpful as I'm sure you can imagine. Is there some other place
that we should be going to rename devices so they are more easily identifiable in the Intune console?
Thanks!

I tried to install the Watch ABC (a free app) on my iPad from the AppStore. It would not download. I attempted to install it a second time, and got the message "You've already purchased this, so it will downloaded now at no additional charge." Any advice?

I tried to install the Watch ABC (a free app) on my iPad from the AppStore. It would not download. I attempted to install it a second time, and got the message "You've already purchased this, so it will downloaded now at no additional charge." Any advice? This is a fee app so I do not understand the message referencing a purchased app. I get the cloud symbol, but it will not download. I closed the App Store app and restarted my iPad, but to no avail. Any assistance would be greatly appreciated.

You are aware that there the app may have downloaded and been placed on the second screen. Not the main one. Can you swipe to the right to see if it is there?

Msi Live Update....not Show The Last Driver

Hi
whe MSI Live Monitor (MSI Live Update 3), search.. not show, the last driver...and bios....
I have a G4MX460-VTP
and the driver in the MSI Live Update is:
Online Ver. 4403 (MSI Version)
but when visit the MSI webpage (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=154) the last driver is:
Nvidia driver 45.32 for Win2000/WinXP/Server2003 OS
and in the Nvidia webpage is 50.16.....
and the same happend with the VGA Bios...
y fix my vga cad update the VGA bios....but...this update don't show in the Live Update 3
How fix it???
thanks

Do not update the VGA BIOS unless you have a good reason to. It is not like a motherboard.
Go to nVidia Drivers if you want the latest drivers.
Live Update may not have been updated OR the version reported by the Live Update utility has been tested successfully with that card. Newer drivers sometimes cause problems with older cards. The only way to know for sure is got to the nVidia site and try the latest.

My ipod is not showing up in the left hand column on itunes. I have tried the trouble shooting methods but nothing is working. My ipod nano also will not play.

My ipod nano is not showing up in the left hand column of itunes. It says connected on the ipod and I can find it in my computer but its not there on itunes. I need it as I want to restore it to factory settings. I have tried the troubleshooting methods that are on the Apple website but no luck.
Also my ipod is not playing. I found a way to upload all my music to my new computer. I followed a guide given to me on wiki and it worked. However, since then I cannot get the ipod to play. The menu is there, it turns on, all the playlists are visable but when I press play it does nothing or flicks briefly on to the page to play but then flicks back to the list again. I have tried all the troubleshooting on the Apple website but again nothing. I wanted to restore it to factory settings but to do this you have to be able to access the ipod in the left column on itunes which obviously I can't do. That was happening before the ipod stopped working. The two issues are separate.
Thanks and hope you can help me.

I have sorted it myself!!
Ipod is now in the top right corner, last time I clicked on it, it ejected it but by clicking on the actual ipod icon then it brings up your ipod. I restored it to factory settings and synced all my music and it now works again. Hope this can help anyone who ends up with the same problem.

I have an app that does not show up on the left under iTunes. How do I delete it?

I have an app that does not show up on the left under iTunes. How do I delete it from my Iphone 5?

If the icon exists on your screen, just do a long press on that icon and when the small X appears on top of the app, press it and it will delete it. As long as this is not an Apple app, since those cannot be deleted.

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

TS1702 Why is the icon for street view not showing up on the left side of the location on the maps app?

Why is the icon for street view not showing up on the left side of the location on the maps app?

Because the included Maps app no longer gets the maps data from Google, so no more street view.
You can get a free Google Maps app from the iTunes App Store.

Mozilla Support would not recognize my old password and would not send an email to reset it [need ADMIN]

Needed to find a solution to the Firefox Mobile Synching problem and tried to log in to my Mozilla Support account (https://support.mozilla.org/en-US). It would not accept my password that worked before saying that "Accounts created before December 2010 may have issues logging in. Please reset your password below. " Okay, tried to reset password and got this: "We've sent an email to any account using this address. Please follow the link in the email to reset your password." However, no email arrived, after two days and about a dozen of attempts!!!!!! At the same time, I could easily get an email confirmation of my ID and verification that account is active. The only problem is with receiving an email that resets the password.
So, I had to create a new account with a temporary email to use Support - it would not allow me to use my main email address, because "it is used by another account". Thus, my old account is completely locked, and I can not use my email address for a new one. This is not only my problem - I saw other people running into the same trouble. It needs to be fixed soon. At the very least, I need somebody with ADMIN privileges to resend me an email for password reset or delete my old account altogether, so I can use my email again. My old user ID is: TPN49. Thanks.

OK Glad it is fixed, thanks for posting back.
I am not sure if that was due to silent Admin action,or whether it was due to a bug fix with the SUpport. MOzilla (sumo) system.
(IIRC there may have been a couple of recent bug reports but I do not have time to look into that at the moment)

Is there a way to have iPad mail NOT show the last opened email? If not, can this be a feature request?

Sometimes while running iPad training and usage sessions I may have to show my screen to faculty or staff while showing them a feature or how to use an app. It would be nice if the mail app didn't show the last opened message in the preview area for the sake of privacy. Can this be turned off or changed?

No.
If you wish to make a suggestion to Apple post your idea at: http://www.apple.com/feedback/ipad.html
By the way this is just a user-to-user technical assistance forum. Apple is not here. We are all users here.

[Help] Password input box NOT showing up at all.

The actual box used to type the password in just will not show up. My phone can only be turned on my swiping the screen up. Everything else shows up, the time, email and text noticications, but when I swipe the screen up all the way I am left with a dimmed background and the black bar that goes across the top of the screen. I've had a password on my phone for over 3 months and haven't turned it off.
I can't restart my phone because the power button is broken and sticks if pressed... meaning it will turn itself on and off continuously for hours on end until I wiggle it out of place.
Is there any way to fix this other than waiting... a full 24 hours, probably, since I just charged my phone, for the battery to die?
Solved!
Go to Solution.

NotApplicable wrote:
I can't restart my phone because the power button is broken and sticks if pressed... meaning it will turn itself on and off continuously for hours on end until I wiggle it out of place.
Is there any way to fix this other than waiting...
Reboot: With the BlackBerry device POWERED ON, using the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
Try that and see if you password screen then appear correctly.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

DB12 not showing the last two completed Database Backup

Hi Gurus,
I have scheduled my production system to take a daily complete db backup , but when I see the Db12 Database History it shows the last complete backup was happened two days before(ex: 18/01/10 considering today is 21/01/10) and its not showing previous date were the db backup completed. When I checked in OS level the backup is completed for the previous day(eg.20/01/10) which is not showing in DB12. Whether there is any standard jobs that update this log ? My database is DB2.
Please suggest as this is very critical.
Regards,
Rahul

Please cross check the following things :
1) Check in SM37 for the DBA* job logs for last 2 days.
2) Whenever backup job is scheduled in DB13, it makes an entry in SAP table "SDBAP". You can also check in this table by the timestamp.
3) Are you able to see backup logs in DB12 before2 days or it is empty ?
Regards,
Ankit

The password keeper is not registering new passwords.

?How can I put/force the password keeper to take a new password.

Do you mean the Firefox Password Manager or an extension?
* https://support.mozilla.com/kb/Remembering+passwords
Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode"

Password Keeper would not show asterisks. Last attempt left

Similar Messages

Maybe you are looking for