Password Reset Issue in Portal

Hi All,
Please help me to resolve this issue.
Issue : We have resetted a password for one srm user in Portal. The User when he tried to login after the password reset initially it was asked to change the password. User changed the password. He is succesfully logged into the portal. Now the problem is when he tries to access a srm work item in worklist it is opening a new window and asking to reset the password again with the error message "No switch to HTTPS occurred, so it is not secure to send a password & This is an initial password that must be changed". It is not asking to change when he tries to login to portal and this error is promting only when he tries to open a work item. Because of this the user could not proceed to work further.
Can any please let me know if faced with the same error.
Thanks in advance.
Regards,
Viswes

Hi Viswes,
There are two solutions for this issue,
1. Create a custom application which will change PWD in all the systems once you change your Portal PWD.
2. Change the backend PWD before accessing UWL. (Login to backend system directly, it will ask for change of PWD).
Thanks.
Sushil

Similar Messages

Password reset option in Portal

Hi Experts,
I would like to integrate password reset option in between help and logout option in masthead.
The issue is:
1.how to integrate a link in Masthead which on clicking enables end user to reset Password?
2.is there any coding that i have to do for password reset?
Thanks Inadvance!
regards,
Siva

Dear Siva,
I will try to address your questions as best as I can.
But what you're asking is too much I'm afraid.
It seems you're needing to learn the basic concepts of Portal development first.
And explaining all those concepts on a forum post is simple impossible.
Moreover, the component you're trying to develop is not an easy one to start with.
My advise to you is to first read some manuals or attend a few SAP training sessions on the
subjects:
- JAVA development
- JSP development
- Developing Portal components
Nevertheless, and trying to answer your questions as best as possible, here's some tips that I
hope can guide you the right direction (and again, if you don't have the basics, you
might not understand part of it):
I have been through above wiki, its not indetail.
Yes It is.
The wiki shows you just what you need - the code.
It is not a "how-to" develop a portal component. It assumes you know that already.
I could not understand where to start from?
You need to develop a Portal Component on your NWDS (Netweaver Developer Studio).
On you NWDS go to
File > New > Project.
And inside that box, choose: Create a Portal Application Project.
Now you need to create the Portal Component.
Go with your left mouse button on the project you have just created and choose
New > Other > Portal Application > Create a new Portal Application Object
I would suggest JSPDynPage (here you can choose to create a JSP, Bean and a Java main class)
Where do we find the 1. portalapp.xml, 2. Implement the Bean, 3. PasswordChange.java, 4. PasswordChange.jsp, 5. Success.jsp, 6. Redirection.java?
You need to create all those JAVA and JSP objects yourself.
The bean is a JAVA class that you need to create as well.
The portalapp.xml is a file that is automatically created by the NWDS when you create a Portal Project.
Provides configuration information for your application - it is like a "business card" of the application itself.
And that "business card" will be presented to the Portal when deployed - saying "hello, I'm a Portal application
and this is what I have inside".
You can learn more about this XML file here:
[http://help.sap.com/saphelp_nw04/helpdata/en/44/489e2df5ee4e35e10000000a1553f6/frameset.htm]
Hope this helps you.
Good Luck!
/Ricardo Quintas

HP ePrint Password reset issue

I just tried to reset my password for the ePrint portal. After receiving the e-Mail, I click on the link and get an error message, that I should try it later.
I tried it several times. Now I have no possibility to use my product. Please support.
thank you.

Hello gamm,
Welcome to the HP Support forums. I understand that the link that you were emailed to reset your password on HP Connected is not working.
Please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

SSPR password Reset issue

Hi Techies,
I am facing a issue in resetting the password of the users. The user is able to register the password on the registration portal by giving all the answers but when trying to reset the password from the FIM password reset portal, giving the user name as
Domain Name\Username
and after providing all the answers which were used while registering the user for password reset,i get to the next page and able to enter the new password and confirm password. But just a click on Next, I receive the following error
An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000)
working on FIM 2010R2 SP1.
PLease help in this.
Thanks in advance
Varun

Have a look at the following posts. May be you'll be able to troubeshoot the error.
http://blogs.msdn.com/b/ms-identity-support/archive/2013/01/18/fim-troubleshooting-sspr-error-3000.aspx
http://technet.microsoft.com/en-us/library/jj134289%28v=ws.10%29.aspx
https://social.technet.microsoft.com/Forums/en-US/69ac3bbb-e66f-4a2e-a01e-2f3490fe5ef4/facing-issues-with-sspr-in-fim-2010-r2?forum=ilm2
If you are working on Windows Server 2012, there may be additional things related to Cryptography Algorithms you might need to disable.
Regards Furqan Asghar

Hpconnected password reset issues....

Hi,
I got locked out of my hpconneced account and when I tried to reset the password with the link provided, entered by e-mail address and submitted it. Nothing shows up at my e-mail account. I have checked spam folder and nothing has been recieved from HP. How does one get help from HP on this type of issue?
Thanks,
Neil

Hi Neil,
Thank you for being a member of the HP Support Forums. I understand that when using the password reset feature on HP Connected that you haven’t received the email.
It can take up to 24 hours to receive the email. I would recommend trying to use the reset password feature a second time. If you’ve already tried this (I know I would have, I’m impatient ) and you still haven’t received the email, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Tiger 10.4.7 Password reset issues related to Safari keychain updating

Following a reset password for administrative updating my software,
The following keychain password update has not correctly been updated
to reflect complete password resets.
I have followed the MACOSX reset procedures and the MACOSX 10.4.6 updates processes and procedures to update all concerned administrative password resets and still the keychain safari messages indicate that safari keychain has not correctly updated to the new password. Annoyance message appears not to affect performance issues of safari just sending emails outbound or chances
that provoke keychain password triggers. Can not initiate safari password compliance. It does not recongize new admin. password.
What next? Any ideas from developer channels? Similiar experiences??

Reference purposes for developers interests. yl61m9

Self service password reset issue

Hello Experts,
An issue about self service password is being encountered. I am setting the new password over self service password reset page, but unfortunately it is not being triggered to the target systems(SAP and AD). In the job log, instead of running the pass 'changepasswordabapuser' or 'setadspassword', IDM is running pass 'update abap user' or 'update ads user'.
But if I change password of a user via Administrator login(in change identity), the password is getting changed on all target systems. Kindly suggest!
Version: IDM 7.2
Thank you,
Girish

Hello Girish,
see if note
1936431 - Self Service Password Change - Modify task is called rather than
Set Password task
can help in this case.
Regards,
Chris

Password Reset Issue

Greetings,
I have a requirement that calls for a user to be redirected to a password reset form after the administrator resets their password. I am trying to accomplish this by updating the obpasswordchangeflag attribute (which I have made editable) to “true” after changing the user’s password. I was under the impression that changing this attribute to “true” would prompt the user to reset their password the next time they logged into the system. Unfortunately, when I log in as the user in question with the newly reset password, I am allowed direct access into the system. In addition, I have tried setting the Password Change Redirect URL under the Configure Password Policy tab with no luck. We are using the Basic Over LDAP authentication scheme. The password policy is configured and enabled. The ‘Change on Reset’ box is checked within the password policy. When I use form based authentication, I am redirected to the password reset form. Has anyone had any luck with the password reset redirect using Basic Over LDAP as their authentication scheme?
Additional information, we are running OAM 7.0.4 and all patches have been applied.
Any information would be greatly appreciated.
Best Regards,
Nick

Thanks Ram, for your reply. Chris, you are correct, making the flag editable is for the next stage of this requirement and isn't really a factor in this problem. Ram, I have checked the 'Change on Reset' box and made sure the password policy is enabled. I have also compared both authentication schemes and found no major difference. For whatever reason, I can't seem to get redirected using Basic Over LDAP. Any other suggestions?
Thanks,
Nick

Apple ID password reset issue

I forgot my Apple ID so requested they sent a password reset to my email address but I didn't recieve it.
The strange thing was that I got it emailed to my 2nd email address and not the one I have registered to this acc. How does it know my other email address?
The 2nd email addy is not in my account setting
Now I have just registered to this forum and it has sent confirmation to my registered address but sent the confirmation of the password reset to my unregistered email
What is happening?

Send an email to Apple - Support - Apple ID
And ask them to confirm the situation. At the same time if you ask, they will help you set up an different rescue email.

Visual Password reset issue Unknown Error

I am trying reset the password so I stop getting those annoying visual voice mail password prompts.
I input my current password my 7 digit phone number the default.
I enter my new 4 digits, reenter, everything checksout but when I select the check mark to change I keep getting unkown error and the password is not reset changed.
Comments????

Hi Viswes,
There are two solutions for this issue,
1. Create a custom application which will change PWD in all the systems once you change your Portal PWD.
2. Change the backend PWD before accessing UWL. (Login to backend system directly, it will ask for change of PWD).
Thanks.
Sushil

APEX ADMIN user password Reset issue

Hello All,
I am trying to reset the password for ADMIN user using following script (taken apxchpwd.sql) from SQL Developer. I have connected to database as user with DBA privileges.
alter session set current_schema = APEX_040000;
begin
    wwv_flow_security.g_security_group_id := 10;
    wwv_flow_security.g_user := 'ADMIN';
    wwv_flow_security.g_import_in_progress := true;
    for c1 in (select user_id
                 from wwv_flow_fnd_user
                where security_group_id = wwv_flow_security.g_security_group_id
                  and user_name = wwv_flow_security.g_user) loop
        wwv_flow_fnd_user_api.edit_fnd_user(
            p_user_id       => c1.user_id,
            p_user_name     => wwv_flow_security.g_user,
            p_web_password => 'newPassword',
            p_new_password => 'newPassword');
    end loop;
    wwv_flow_security.g_import_in_progress := false;
end;
Commit;But I am getting following error.
session SET altered.
Error starting at line 2 in command:
begin
    wwv_flow_security.g_security_group_id := 10;
    wwv_flow_security.g_user := 'ADMIN';
    wwv_flow_security.g_import_in_progress := true;
    for c1 in (select user_id
                 from wwv_flow_fnd_user
                where security_group_id = wwv_flow_security.g_security_group_id
                  and user_name = wwv_flow_security.g_user) loop
        wwv_flow_fnd_user_api.edit_fnd_user(
            p_user_id       => c1.user_id,
            p_user_name     => wwv_flow_security.g_user,
            p_web_password => 'newPassword',
            p_new_password => 'newPassword');
    end loop;
    wwv_flow_security.g_import_in_progress := false;
end;
Error report:
ORA-20001: Unauthorized access (security group package variable not set).
ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 22
ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 1625
ORA-06512: at line 12
commited.Database Version: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
APEX Version: 4.0.2.00.07
Can someone let me know what is the issue?
Regards,
Hari

Hello All,
Our DBA has ran the script apxchpwd.sql as SYS and it went fine. But still we are unable to login into INTERNAL schema with ADMIN user. Any thoughts?
Only thing I need to check is APEX user.
alter session set current_schema = APEX_040000;But that is correct.
Where and how can I check the apex INTERNAL workspace user ADMIN status?
Regards,
Hari

EventHandler - Password Reset Issue

Hello Experts,
I have developed a post process event handler for Trusted Source Recon. In the event handler I have put a simple logic to generate password and set it for user using API.
BulkEventResult execute method
//getting user key from BulkOrchestration
System.out.println("Setting Password for User....");
passwordIntf = Platform.getService(tcPasswordOperationsIntf.class);
passwordIntf.setXelleratePassword(lUserKey, "haihello");
System.out.println("Password has been set successfully....");
Password is successfully set for the user but When I logs into OIM with the password "haihello" , It throws invalid password error.
log message :
Setting Password for User....
Password has been set successfully....
<Sep 7, 2011 7:24:23 PM IST> <Error> <oracle.iam.reconciliation.impl> <BEA-00000
0> <Sending Reset Password Notification is not successful >
Am I missing anything?
Thanks and Regards
INIYA

INIYA wrote:
Hello Experts,
I have developed a post process event handler for Trusted Source Recon. In the event handler I have put a simple logic to generate password and set it for user using API.
The ResetPasswordActionHandler is activated in your environment. The handler expect email notifications can be sent to the user.

ICloud email password reset issue on MacBook

Hi,
Further to the reset of my Apple ID account, I am not able to receive email on icloud mail address with MacBook Mail application anymore, whereas this change has not affected icloud email address use on iphone & ipad.
Thanks for your help!

Additional information, the following error message occurs once checking account password for imap:
"Échec de la connexion au serveur icloud.com IMAP « imap.mail.me.com ». Assurez-vous que le nom d’utilisateur et le mot de passe sont corrects puis cliquez sur Continuer. Vous ne pourrez pas recevoir de courrier si les informations sont incorrectes."
Sorry in French...

Eprint password reset issue/ no info forthcoming

ehey i cant beleive there is no repl;y to the eprint password issue. this is the eprint support fforums after all! hey and I would have thought one of ypu HP people would have an idea how to address this issue.
am so disappointed in this forum so far!

Hello shirttails,
Thank you for being a member of the HP support community. I understand that you were having issues trying to log into your HP ePrintCenter or HP Connected account.
I see that you have already realized that the account can be merged with your Snapfish by HP account and that the credentials you use to log into Snapfish are used to log into your HP ePrintCenter or HP Connected account. HP ePrintCenter has been upgraded to HP Connected for those customers who reside in the USA, the UK, France and Germany. I have included the Frequently Asked Questions About Linking Your Snapfish Account to HP Connected document for reference.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Password reset issue for users

Ok this is driving me nuts and hopefully there is a simple answer.
I am running a new fully update 10.8 server. I have setup open directory and have profile manager running. From the server app I go into the users pane, i select a standard user (non admin) and right click to choose reset password. I enter a new password in and verify and click ok. To test this I goto the my devices page from the web and it gives me an invalid password message. I know its right. I have reset it and restarted the server to no avail. What can be going wrong here?

Sean,
I would stop every service and then lauching only:
1. DNS
2. Open Directory
3. File Sharing
and then: "last time" (hopefully) reboot of the machine.
This is to reduce the sideeffects.
After the reboot I would check the logs of all those services after the reboot and check if they writing errors into.
What is happening then?
~ Markus
P.S.: Anyway, how is your server installed? Is this server available from the internet or only in a local network?

Password Reset Issue in Portal

Similar Messages

Maybe you are looking for