Password Reversible Encryption
Hi All,
1. How the reversible encryption Policy
Works ??
If i enable the policy where the Password will save ?? (Location). I need my last 13 Passwords should save in a Location.
2. Password Must Contain Upper and Lower case all over Domain.
In my org they want to set Password Complexity, They must need Upper and Lower case in Password. As per default complexity 4 condition are there
Contain characters from
three of the following four categories:
English uppercase characters (A through Z)
English lowercase characters (a through z)
Base 10 digits (0 through 9)
Non-alphabetic characters (for example, !, $, #, %)
In that case Abc123 also work and
abc@123 also work. But I need every password should Contain Upper and Lower case. How to achieve this ??
Many thanks in advance :)
Regards, Hari Prasad.D
Hi All,
1. How the reversible encryption Policy
Works ??
If i enable the policy where the Password will save ?? (Location). I need my last 13 Passwords should save in a Location.
2. Password Must Contain Upper and Lower case all over Domain.
In my org they want to set Password Complexity, They must need Upper and Lower case in Password. As per default complexity 4 condition are there
Contain characters from
three of the following four categories:
English uppercase characters (A through Z)
English lowercase characters (a through z)
Base 10 digits (0 through 9)
Non-alphabetic characters (for example, !, $, #, %)
In that case Abc123 also work and
abc@123 also work. But I need every password should Contain Upper and Lower case. How to achieve this ??
Many thanks in advance :)
A helpful article with further links for reading on this topic is here:
http://blogs.technet.com/b/askds/archive/2009/05/19/understanding-password-policies.aspx
Note that although Group Policy is used for enabling password policy settings, the way the settings really work, is actually a feature/behaviour of Windows and Directory Services. As such, you may also find further help/experience in the winserverDS forum.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Similar Messages
-
How can I switch from auto_login wallet to password-protected encryption wallet in 12c
--Now the autologin wallet is in effect
SQL> select * from v$encryption_wallet
2 ;
WRL_TYPE
WRL_PARAMETER
STATUS WALLET_TYPE WALLET_OR FULLY_BAC
CON_ID
FILE
/acfs3/wallet
OPEN AUTOLOGIN SINGLE NO
0
--I need to export the keys and it informs me to use password-based keystore
SQL> ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234";
ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234"
ERROR at line 1:
ORA-28417: password-based keystore is not open
--So I try to close the autologin keystore and open the password-based keystore, but the autologin keystore cannot be closed
SQL> administer key management set keystore close;
administer key management set keystore close
ERROR at line 1:
ORA-28365: wallet is not open
SQL> administer key management set keystore open identified by "tde_1234";
administer key management set keystore open identified by "tde_1234"
ERROR at line 1:
ORA-28354: Encryption wallet, auto login wallet, or HSM is already open
So My question is
How to switch from auto_login keystore to password-protected keystore ?Remove the cwallet.sso file and check the wallet status in v$encryption_wallet.
If it is not opened, try to open it with administer key statement.
Check the status again. -
I don't remember making a password to encrypt my iPhone backup. Does anyone know how I can uncheck the box. Or any other program I can use to backup my iPhone for free instead of iTunes ?
I have checked in the password utility and it is not stored there.
ThNKAEncrypting an iPhone backup can be required by a profile installed on your phone if using an Exchange account. Read here about how to recover the passcode if you don't know it:
http://support.apple.com/kb/TS5162 -
I forgot my password for Encrypt my Backup how can I reset that please help I really need it Urgently?
If you do not know the passcode then you cannot use the backup
Sorry -
How can I make a password protected encrypted sparse image?
How can I make a password protected encrypted sparse image?
Doing what worked in 2006 does not produce password protection even though I have typed one in and re-entered it as requested. Clicking on the Disk image opens it without asking for the password. I am stumped. Many thanks.
(OS 10.10.2 on 2010 MacPro)John Roehm wrote:
That did it. The Keychain box was automatically checked and I did not know enough to uncheck it. Many many thanks.
Yeah, nobody does. They should put up a custom password save box when you make an encrypted disk image that explains what will happen if you store the password in the keychain. In the current "how-to" article, they mention it, though: How to create a password-protected (encrypted) disk image - Apple Support -
Keychain shows password still encrypted
Keychain shows my apple Mail password still encrypted when I click "Show Password".
I need to confirm my email password.
Other email accounts, like comcast, show the password legibly in keychain.
Can anyone help me with this?
10.8.3 server imac
MacYou might be able to fix the keychain by selecting
Keychain Access ▹ Preferences ▹ First Aid
from the menu bar. -
i forgot my password at encrypt iphone back up.what should i do? please help me. thank you
Restore the device as new and setup as you desire.
-
ALOM account passwords stored & encrypted?
Hello Folks
Does anyone know for certain ...
a) Where the user passwords are stored / persisted in the Sun ALOM environment? I assume within NVRAM space of the ALOM firmware....
b) are these passwords indeed encrypted with what algorithm?
Are these facts documented? I could not find detailed answers in the Administration Guide.
Thanks & Cheers, RogerYes. Open the datastore and click on "Display Language". The ftp password is there but encrypted. Same thing when exporting it to an ATL etc.
-
What is password-based encryption?
I'm very interested in this cryptography method, but have little information about it! If I have a password and a byte[] plaintext, will I obtain a byte[] cyphertext by encryption? And having the same password and the byte[] cyphertext, will I obtain the byte[] plaintext by decryption?
Steps for Password-Based Encryption:
- Get the password (usually an Unicode string)
- Transform it to bytes (using the encoding that is mandated by the standard)
- Pass the bytes to a function (like PBKDF2, defined in PKCS#5 v.2.0) whose inputs are the password and a random-chosen byte array called 'salt', and whose outputs are a key and an 'initialization vector' (a byte array that's used by some encryption modes, like CBC, CFB or OFB).
- You'll need to send the following data to the receiver to the message:
* The salt
* The encrypted data
- The receiver that knows the password will get the salt, and recover the key and the initialization vector using the algorithm mentioned above. Then he/she can decipher the encrypted data. -
Password for encrypted backup on Time Capsule never asked
Hello,
My system is Mac OS 10.8.3 on a MacBook Pro.
I do encrypted backups with Time Machine on a Time Capsule.
I wonder why I am never asked the password I chose when encrypting for the first time, especially when I do "Enter Time Machine".
As a comparison, I also have external disks formatted as "Mac OS Extended (Journaled, Encrypted)".
When I connect such an external disk to my laptop, before it is mounted I am asked the password I chose when formatting, which sounds good.
ThanksWhen you originally set up the Time Capsule, you were asked to establish a Time Capsule or Base Station "device" password, which is stored in KeyChain Access on your Mac.
Rather than have to enter the Time Capsule Base Station device password each time that you access the device, KeyChain Access on your Mac remembers the password and enters it for you when your Mac connects to the Time Capsule.
If you do not want KeyChain Access to remember your password, and you do want to be asked to enter the password each time that you connect to the Time Capsule disk, then change the password using AirPort Utility and remove the check mark next to "Remember this password in my keychain" in AirPort Utility. Then, click Update to save the new settings.
It is much easier to let KeyChain Access remember your password on your Mac, but you can do it all manually if you wish. Remember that other users will not be able to access the Time Capsule disk unless you have given the device password to them. -
Password for encrypted back up to iphone
I dont remember my password for iphone encrypted back up. Does anyone know a way of contacting Apple to allow me to do this as will take me ages to input over 600 contacts. Or do they know a way of getting my contacts off my many Ipads that have them on as well?
Apple doesn't keep copies of the passwords to your back ups. Contacting them would be of little use.
What sort of account do you have your contacts synced with? Gmail? iCloud? Outlook? Something else? -
Password for encrypted backup of device
I need help to change the type of encryption for my iPhone and iPad backups in itunes. I have tried all the passwords I ve used in years and have no clue. Somewhere in Support I found an instruction that did not lead to clearing the password. It did send me to backup to iCloud and do a restoere from there. But this is not what I am trying to acheive. I already was backing up to iCloud. If I need to do a restore from a backup in iTunes on my PC I cannot do it because I cannot provide a correct passowrd for the encrypted backup.
Can anyone help me with a solution?If the user cannot remember the password for the backup, the backup is useless. There is no way to reset or remove the password requirement.
If the user did not enable backup encryption, the backup is corrupt.
In other words, the backup is no good without the password, delete it and move on with life. -
Change unknown password on encrypted vol
ok new to me mac username "New Owner" I cant get in with what I thought was the password and the volume is encrypted
so resetpassword shows no volumes .However mount -uw / works as I was looking for a .AppleSetupDirectory to delete
as well some suggested opendirectory.plist daemon which since its not there how do I get this password reset?Who encrypted the drive? Call the person you bought it from and ask them.
-
Lost password for encrypted disk image
i created a encrypted disk image to store some personal files and now i can not remember my password and its not in my key chain is there a way to reset the password or at least recover the files.
If you could access the files on an encrypted disk image without knowing the password, there wouldn't be much point in encrypting it.
Do you remember anything at all about the password? Was it a name, or a dictionary word? If so, there might be hope of cracking it before the Earth passes away. You'd need the help of a consultant to do that. -
Password on encrypted volume not being "forgotten"
I've set up an encrypted disk image (sparsebundle) and written a short bash script to simulate the old-style FileVault (to protect just a single account.) It uses a folder within the encrypted volume as the home folder of an account that I use for sensitive information. While it took a little while to get the permissions/ownership right on the volume and image, it works fine. The other tricky part was that I have the script close the volume after it detects the account has been logged out -- I discovered I needed to wait a while for the logout to complete before closing the volume (otherwise it seemed like the system was trying to read or write from the volume even after "who" showed the account was logged out, and so it created a new home directory that confuses things.) Now, the "problem" I have is this. The first time the script opens the encrypted volume the system of course asks for the password. Thereafter unless I reboot (logging in and out of the non-protected account I start the script from doesn't help) and possibly after a *long* time, tthe system seems to be remembering the password to the file -- on subsequent uses of the script the volume is opened without me being asked for the password. I have examined carefully what I do when entering the password to make sure it's not saved in the keychain -- and indeed it isn't (verified by looking at the keychain). Does anyone have any idea where the system (presumably the Finder) is saving the password and how to get it to "forget" it? (I just realized I haven't checked to see if the password is "remembered" system-wide or just in the un-protected account.) I've looked in both the system and account set of caches and nothing is obvious (all the finder cached data is in a single database, presumably in some obscure format.)
Ted Lee
Minnetonka, MNSome more experiments. Since I was using the encrypted image to simulate FileVault, I put the image in the /User directory (which is where the old FileVault put its image for an account.) This time I created another encrypted sparsebundle in a directory on my desktop -- the system did *not* remember the password for it (I had to enter it each time I opened it.) More interestingly, diskutil *knew* about and remembered the image I'd put in /Users, but not the one on my desktop. Diskutil even said that the volume inside it was an unmounted (encrypted) partition. So it appears the system is "remembering" images that are in the /User directory -- I have no idea if there are other directories (say, /Library) where it would be remembered too. But the "memory" has something to do with the live system -- since if I restart, the "memory" is lost. Whether it is kept in some none-obvious place in the file system that disappears on shutdown or restart or just in virtual memory I of course don't know.
Maybe you are looking for
-
SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.
-
My Mac book pro is having two issues at the same time.
HI Guys, My Mac book pro ...touch pad is acting funny...going all over the screen, I have bare minimum control over it. and to make matters worse, the Battery of my mac book pro is not charging, the charger is showing green light (not Orange) - the
-
Reading text file in different encodings
I am trying to build a tool that will display XML files. As some of these files are generated from a stylesheet transform they may have an encoding other than ascii (for example, UTF-8 or UTF-16). The Java InputStreamReader will accept an encoding ty
-
Cannot install Photoshop CS4 Trial on Vista x64
Hi everyone, I got a big problem, I download the Photoshop Extended Trial Version and extracted it without any problem. But when I double-click setup.exe nothing happens. It seems to popup a window, but its gone every fast. When I open the Taskmanage
-
Lights wont stay on the media center thing
i just got this computer its a toshiba satellite A665-S5170 and the lights on media center thing were always on so was the light about the touch pad, but i wanted to see what eco button did so i clicked. it turns out it turned off all the lights exce