Paste problem in Logic
You first press command+C to copy, then you press command+v to paste,sometimes it pastes correctly, but sometimes, nothing is pasted and your view has been shifted(moved) to the end of the song,what's the problem?
To copy paste from one region to another Press E to open your Event window. You can highlight and copy all your selections in the Piano Roll window, but you should paste them into the Event window. I use 'Paste at same location' to be safe, then drag the group of notes around. It works for me every time, especially if I'm copying from one project to another.
Similar Messages
-
Copy & Paste Problems in Logic Pro 8
Hi All,
I'm working with LP8 and was trying to use some tracks from an old project on another newer project. I copied the files, closed the project, opened a new one and then pasted.
I've had nothing but problems doing it this way. I now realize I should have imported the audio files. But, after working on this new project for a few days, I'd rather not go back and start over.
Here are my problems:
1) The audio files on the old project aren't playing anymore
2) Any time I try to listen to a loop in the media browser, it plays through the copied audio track and changes the pan of the track.
3) Every once in a while when I add a new track and record or add a file it plays the old copied audio file through the new track instead of the audio file that is on that track.
Ok, I tried being as clear and concise as possible and again I've found how to import audio files from different tracks but I want to see if I can fix the problem some way before having to start over or do some hefty rearranging.
Thanks for any help you can offer
ChrisHi, in my experience you can always better import the audio files than paste them into your project (but you figured that one out yourselve :))
To answer your questions:
1. Could it be that you've moved you files from the old project's audio folder (cut instead of copy?)
2. I don't know why listening to a file in the media browser can affect your panning information... Could it be that the automation write or latch mode is turned on?
3. Could it be that the old file are still on the track you're recording? So that you are recording on top of the old file? When you record a new file over it, it's hard to see any underlying regions (they might show up slightly with some dotted marks)
I hope I was able to help you... Good luck! -
The Problems With Logic (as I see them) - PART TWO!
Hello again,
It seems to be a tradition now that as I compose on a track, I keep a text editor open so that I can jot down all the annoyances and problems that I encounter during my creative process... Anyone who missed the previous edition of this topic, please visit PART ONE, here:
http://discussions.apple.com/message.jspa?messageID=3605456#3605456
That said, here I give you "The Problems With Logic Part II":
1. Logic should clear the playback buffer everytime you play. Quite often you start playing and there is trailing reverb/note events from various audio instruments and plug-ins.
2. The sample edtor "save selection as" has no memory of where you previously were in the file browser.
3. If you double click on a wave form, the sample editor opens up with the wave form you double clicked on... Great.. But now, if you go and double click on another wave form somewhere, it just takes you back to the sample editor with the same previous wave form selected (not great). This is incredibly annoying if you are attempting to save out certain edits-- Quite often you will end up saving 5 or 6 of the same exact waveform, thinking you were saving each individual one. GRR!
4. Key commands.. if you try to assign a key command to something that is already used by another feature, you are presented with a window warning you that it already exists.. If you click cancel, then you can no longer enter any keys in the key field.. You are forced to close the key commands preferences window and start over.
5. Key command window: You should be able to search by command.. For example, if I want to find out what "o" is assigned to, I should be able to search by O-- Further, you should be able to sort the key commands by clicking the column titles "key", "command" -- or "midi"... After all, we can sort by name, date, size, etc in the finder by clicking on these column titles.
6. Tempo Tap feature-- I am quite confused by this. There should be a simple way to tap and define a tempo. When ever i try to do this, the tempo is only temporarily changed until I stop playing, and most of the time I get error alerts about trying to sync audio and midi (mind you, when there are absolutely no parts in the entire arrange window). The manual states that with "tempo recording" checked on the tempo interpreter window, that the taps will record tempo changes, but this does not work. I tried doing this, tapping the key command I defined to tempo tap (ctrl-shift-t), and I was tapping at various speeds-- many taps fast.. and Logic recorded tempos of 99-101bpm.. I was tapping atleast around 175-180bpm. I then tried tapping slowing, and Logic recorded tempos of 99-101 again... so this feature obviously is full of bugs.
7. When loading songs, as soon as various plugins such as Kontakt, exs24 begin loading samples, it brings logic to the front. If you're working in the background in other applications while waiting for your songs to load, you are rudely interrupted from what you're doing (such as, selecting from a menu, typing a document, etc) only to be forced to watch a status bar fill up.. and then all key presses at that point become error beeps.
8. Logic's sample memory easily becomes messed up and crazy. Quite often when using AU instruments such as BFD, Culture, and even Synthogy's Ivory. I will switch to that particular track to play on my keyboard, and each sample will be full of horrible pops and clicks-- the kind that destroy speakers. Other times, in a sample of a string for instance, all of a sudden after one second will be a pop and then the sample will be playing at a completely different pitch... I have to remove the AU instrument and reload it at this point.. This happens quite often. Logic should offer a 'buffer reset' so that you can just flash plugins but they reload whatever preset they were set to.
9. Volume faders resolution are lame! There is no reason why you shouldnt be able to access +1.0, +1.1, +1.2, +1.3, +1.4, +1.5, +1.6, +1.7, +1.8, +1.9... Further the display is only so wide and you can't even read the decimal values for numbers -10 and lower. They just appear as 10.
10. When a movie is open, and you are viewing the video output via FIREWIRE, there is a mini-floating window which contains the smpte, position, and movie start information-- However you cannot modify any of these values. You have to switch video output back to "WINDOW" to change the start position of the movie. This is obviously a bug.
11. Changing the movie's start time is very user unfriendly. There should be a simple way to specify to start at a moment of time relative to SMPTE-- So you can just say "+9:15" for example, and it would take you in 9 minutes and 15 seconds, rather than how it is now where you have to think backwards from SMPTE code and subtract.
12. You cannot view video as a window AND output to firewire. There is no reason why you shouldn't be able to do this. For example, if I wanted to output my video to a monitor in a vocal booth-- I can do this.. but I can't see what the vocalist is seeing on my own screen! This is just nonsense. You should be able to output to the screen (desktop mode or floating window) as well as an external firewire device.
13. Saving a song with a movie open should mean that when you load that song, the movie should be up and exactly as it was prior to saving. As it is now you have to select "open movie again".
14. There is still definitely a bug in track automation-- this was really bad back in version 4, but there is still something not quite right here where starting playback will not always guarantee that the automation data is being read.. And in my experiences it results in volumes being incorrect until you stop and play again, and in some cases it will not work at all unless you plot some automation points. This is an intermittent issue-- but quite often activated by placing an audio region from the audio window on a track (SEE VIDEO).
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicautomationbug.mov
15. In the arrange window, sometimes when zoomed in tightly, all parts on a track are selected, and you think that only the part that you are looking at is selected.. you move this part, and now all of your parts are off. Logic should have some kind of visual aid to let you know when ever you are moving multiple selections... Something like, the parts you are moving will highlight a dfferent color or something... This is a similar problem I have with the loop area of the screen.. You can accidentally turn it on when in the matrix window, and have no idea unless you look down at the transport, but with me for example, my transport is at the very bottom of the screen and I am not looking there most of the time.
16. Automation data, when two points are semi-close to each other, suddenly the value of the data is no longer shown.. I can understand that when you are zoomed out, and there is simply no space for this to visually appear, that's appropriate. But as it is now, it doesn't display this information when there is plenty of space for it to be visible.
17. Logic should let you set audio track inputs to the various outputs (1-2, 3-4, etc) and buses.
18. clicking on a track selects ALL parts. This is so so so annoying. How many times have I been editing voice over, and selecting a track, thinking I am shrinking the length of a part, and to find that ALL parts have been shrunk.. SO ANNOYING!!!! This needs to not happen, and there should be a simple way to right-click a track and it will have an option "select all regions"... also, when you click on a track and all parts are selected, if you horizontally zoom, logic zooms into the beginning of the track, rather than the song locator. I don't know what the LOGIC behind this is, but it's not very helpful, it actually is very frustrating.. Zooming should always move towards the song locator position.
19. EXS 24 should have a "reverse/backwards" button so that samples played are backwards.
20. Logic should offer a way to globally increase or decrease a specific automation type (especially volume) globally for all tracks... So if you have detailed crescendos that start at -3.8 and end at +1.6, you can add 3db to this and it will now be at 0.8 and end at 4.6.
21. If you have multiple tracks of the same track (such as three Audio track #1's)-- say you are recording guitar parts, and just copying the track and muting the previous track as a method of maintaining multiple takes for later auditioning. If you draw automation volume data on this track (it appears on all 3 tracks), and then if you delete the audio from one of the muted tracks and tell logic to KEEP it, suddenly all automation data is gone. GRR!!!
22. Several times I have opened Kontakt, and attempted to load an instrument while outputting a movie via firewire video to my monitor. As soon as I try to load the instrument, the firewire video output on my monitor goes crazy, and then comes back on.. Logic then crashes. This has happened 3 times randomly...
23. UNDO does not work on every function. for example, if you change an output to bus 1 instead of 1-2, you cannot undo this. Undo should undo whatever the last command was, no matter what it was. This is what the word LOGICal is supposed to represent.
24. Floating windows (as in plugin windows) should close with apple-w!!!
25. *BUG* If you are in a part that is say 10 measures long, zoom in horizontally 100% in the matrix window-- You then isolate one specific quarter note pitch in the middle of this measure, and have cycle turned on, looping over this one quarter note, if you are not looking at this note event/loop region when you hit play, the display will jump to the beginning of the part and never show you this note event as it loops. However if you have the note event on screen when you hit play, then it will behave properly. This makes it extremely difficult and frustrating to perform detailed hyper-draw work. (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicloopbug.mov
26. *BUG* Host Automation is not accurate. I assigned Kontakt's tune knob to C#000, and If I place a dip, the knob begins to move way before the automation data is even present.... So basically what I was trying to do, can't even be accomplished because Logic screws everything up by pitching the instrument too early... Such a shame.. By the way, I previously mentioned the importance of being able to display part data in the arrange window as matrix data (horizontal lines) rather than score data. Someone argued what good this would do-- Well this is a perfect example, if I am attempting to affect a particular section of a note with automation, I can't possible visually see where this is because the length is not described by the current score representation. Having a horizontal representation would solve this problem... (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicctrlchngbug.mov
27. There should be a way to convert stereo samples to mono in the sample editor.
28. When you view "as text" in the environmentt, you cannot drag an object to the arrange window-- Such as to create a bus track.. Now mind you I don't know why you can't just select "BUS" when editing a track in the arrange window in the first place, however there is no reason why 'view as text' should behave differently than when it's viewed as icons.
29. When you drag a bus from the environment to the arrange window, it replaces whatever track was there. It should ADD a track instead of replace-- atleast there should be a preference for how this behaves.
30. Occasionally when dragging a bus from the environment, there is some visual garbage in the track automation (see screenshot).
31. There should be a way to LOAD and SAVE selections in the arrange window. Quite often when editing audio from a countless number of parts/regions, it becomes painful when you have to select and move 100s of audio files. There should be a way that you can just select a ton of regions and save that selection, and reload it at anytime. There are a few 'select' tools/options under the edit window, however they are song specific-- not track specific. So they are completely usesless for what I need.
32. Logic should offer a feature to collect sysex data from midi devices so that patch names show up and can be selected via program change.
33. When no track or part is selected, and you vertically zoom in, Logic should zoom into the center most track.. It behaves very oddly and zooms in more towards the top. This becomes extremely annoying when dealing with a sequence involving 100 tracks, and a part is selected but you scroll far below where the part is.. When you begin to zoom in, it takes you towards the selected part, yet it's not displayed on the screen and you have no reference for what you are even looking at. The rule should be this: If the part is on the screen, zooming vertically will bring you to it. If it's off the screen, you will zoom into the center track of whatever is currently on the screen.
34. I mentioned this in a thread earlier... http://discussions.apple.com/thread.jspa?threadID=752485&tstart=0
There is a bug when using the transform tool involving the 'position' variable. In my example, I was attempting to reverse the time placement of three chords, that occured in a part somewhere in the middle of my song. By selecting the measure start and end of this part, Logic was unable to select or operate with the transform tool (and I tried a variety of transform options). If I moved this part to the beginning of the song, then the transform tool would suddenly work. After some research, I found online someone had said "Position Time position of the event, referenced to the start of the MIDI Region (not of the song)."--- But if I still doubt this is true, because I then placed the part on a new track with no other data, and placed it in the middle of the sequence and in the transform tool under position I selected '1 1 1 1' to '5 5 5 5' as well i tried setting the position to 'all', and none of this worked. This obviously is a bug... If it's not then it's a very serious design flaw. The position should relate to measure numbers of a song, and nothing else.
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/video/transform.mov
That is all for now...
For those who firmly agree with me and all of the points that I have brought up now and in the past, I encourage you to contact Peggie Louie, (the Logic HR department contact) at (408) 996-1010 and suggest that she hire me as a consultant to help eliminate Logic's many annoyances. I have tried to pursue this heavily in the past, but sadly I was completely ignored by her on all levels. Maybe you all can help make a difference?
Fighting the good fight,
Patrick J. Collins
http://collinatorstudios.com11. Changing the movie's start time is very user
unfriendly. There should be a simple way to specify
to start at a moment of time relative to SMPTE-- So
you can just say "+9:15" for example, and it would
take you in 9 minutes and 15 seconds, rather than how
it is now where you have to think backwards from
SMPTE code and subtract.
For this one I'd suggest getting SMPTE calculator. Entering timecode numbers and having to add and subtract is not so difficult, and AFAIC part of a composer's gig. But what I would add, instead, is that it would be fantastic if Logic provided a timecode calculator (edit: even if it was in the form of a custom Logic widget).
13. Saving a song with a movie open should mean that
when you load that song, the movie should be up and
exactly as it was prior to saving. As it is now you
have to select "open movie again".
This doesn't always happen. I've struggled with this for a long time, and I don't know why sometimes the movie will load and not other times. I would also add here that Logic should show the file pathname to the movie. Somewhere...
18. clicking on a track selects ALL parts. This is
so so so annoying.
You can prevent this from happening if you have cycle turned on and set to a set of locators that "contain" the parts you might want to select en masse. I always work with cycle=on so this is not a problem.
21. If you have multiple tracks of the same track
(such as three Audio track #1's)-- say you are
recording guitar parts, and just copying the track
and muting the previous track as a method of
maintaining multiple takes for later auditioning. If
you draw automation volume data on this track (it
appears on all 3 tracks), and then if you delete the
audio from one of the muted tracks and tell logic to
KEEP it, suddenly all automation data is gone.
GRR!!!
Never had that happen. In my experience, telling Logic to keep the data always works.
23. UNDO does not work on every function. for
example, if you change an output to bus 1 instead of
1-2, you cannot undo this. Undo should undo whatever
the last command was, no matter what it was. This is
what the word LOGICal is supposed to represent.
Undo in Logic is highly problematic for other reasons. Here, I think there should be a specific Environment Undo, just like there's a separate undo for audio edits.
29. When you drag a bus from the environment to the
arrange window, it replaces whatever track was there.
It should ADD a track instead of replace-- atleast
there should be a preference for how this behaves.
Right. This is a matter of personal preference. But still there are other ways to get an object assigned to a track. The "thru tool", for instance. No dragging required.
32. Logic should offer a feature to collect sysex
data from midi devices so that patch names show up
and can be selected via program change.
My guess: considering how much sheer time it takes to write this kind of software, let alone debug it with every conceivable device, it's not likely this is going to happen.
That is all for now...
For those who firmly agree with me and all of the
points that I have brought up now and in the past, I
encourage you to contact Peggie Louie, (the Logic HR
department contact) at (408) 996-1010 and suggest
that she hire me as a consultant to help eliminate
Logic's many annoyances. I have tried to pursue this
heavily in the past, but sadly I was completely
ignored by her on all levels. Maybe you all can help
make a difference?
Wait in line buddy!
(LOL)
I must say, I'm very impressed with your list and attention to detail. And I feel your pain, trust me. But many of the things you've listed are feature requests and not bugs. And some of the behaviors you've described I have yet to run across. So this is typical with Logic, that it can be operated in so many diverse ways that no two people run it in the same way, nor would two people conceive the program's capabilities in the same way. But I digress...
I also think there's a certain amount of Logic convention that I don't think you've adopted yet, hence your wish for behaviors that don't yet exist.
I don't disagree with most of your feature requests, and I'm (quite unfortunately) able to say that I'm familiar with most of these bugs and about 9 dozen more. But again, it's important to distinguish between bug, feature request, time to RTFM, and errant behavior that's experienced by a very limited number of users.
There's no doubt that this program has its problems. In particular, your #1 re the playback buffer. And I'm glad you've brought many of the bugs into the light for people to read. Good work. -
Does the MacBook have the thermal paste "problem"?
I'm really thinking about saving up my money to get a MacBook, but with all of the thermal paste "problems" with the MacBook Pro, I'm not sure if the MacBook has the same problems. Has anyone with a MacBook taken it apart and examined the thermal paste? I'm hoping that Apple has chnaged their instructions on how much thermal paste to apply in the MacBooks and MacBook Pros. If anyone has done this, or knows of any place on the web with pics of the MacBook taken apart, I would love to hear about it. Thanks in advance!
-MRCUR
Message was edited by: MRCURSome people have encountered very excessive amounts of paste on the MacBook as well, and one person out of curiosity went into his 12 inch Powerbook and found it glopped on there too -- and of course a healthy improvement in the thermal performance of the computer once it was done properly. Seems to be an ongoing Apple problem -- but not necessarily a problem in every machine, as some people have found much less excessive paste application and only a minimal improvement in thermal performnce after reapplying.
The MacBook is very much easier to disassemble than the other machines in part because the logic board and heat sink faces up and therefore you do not need to remove the logic board, but do please note that if you do take it apart, any damage that is deemed to have resulted from your repair will not be covered. -
I'm on a G5 2.0Ghz with 12Gb Ram, but Logic seems to lock up all the time with overloads on only one core. Sounds quickly become crackly as the core overloads, but the other core hardly shows any activity.
I have tried all kinds of different configurations of settings, followed all the standard advice for buffer settings, ticking and unticking all the options.
I'm using a Tascam FW-1804 interface which Tascam assure me is fine in Leopard.
Is this a problem with Logic misreporting CPU activity? Or is one core really overloading while the other remains largely dormant?
Are there some specific settings im missing that is required when using a non intel G5?
Thanks in advance!
BobHere's a great article about how Logic distributes processing power over multiple cores. Some useful info on how to balance out loads:
http://support.apple.com/kb/HT3161
And make sure I/O Safety Buffer box is OFF.
Good Luck! -
Problem opening logic 9 in Mountain Lion
Hi there
Just bought a new 13" Pro and wondered if anyone else has had problems opening Logic in Mountain Lion.
The whole of Logic Studio has been successfully moved across with Migration asssistant, except Logic Pro itself whichwon't open because:
'You can't use this version of the application "Logic Pro 9.0.0.app" with this version of OS X.'
Problem is when I I try to install the update 9.1.7 I get the message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.
I also get this message when trying to install the 9.1.7 update on my old MacBook Pro, which has the original version of Logic 9.
Any suggestions?Post in the Logic Pro forum area.
-
Problem starting logical host on eGate 5.1.0
I'm having problem starting logical host for eGate 5.1.0 on Linux platform, and I cant see where is the problem lies. Is there anybody here that can give me some hint or guide?
Below is the error message from the log.
[#|2006-08-22T17:57:28.506+0800|WARNING|IS5.1|javax.enterprise.resource.jms|_ThreadID=11; ThreadName=STCMS process monitoring;|STCMS process ended unexpectedly with exit code 1; initiating application server restart|#]
[#|2006-08-22T17:57:28.567+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=11; ThreadName=STCMS process monitoring;|sending restart notification to server...server|#]
[#|2006-08-22T17:57:28.721+0800|WARNING|IS5.1|javax.enterprise.system.tools.admin|_ThreadID=12; ThreadName=RMI TCP Connection(1)-127.0.0.1;|core.tmp_folder_deletion_failed|#]
[#|2006-08-22T17:57:28.722+0800|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=12; ThreadName=RMI TCP Connection(1)-127.0.0.1;|stcms.alert_shutting_down|#]
[#|2006-08-22T17:57:28.722+0800|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=12; ThreadName=RMI TCP Connection(1)-127.0.0.1;|stcms.broker_shutting_down|#]
[#|2006-08-22T17:57:31.020+0800|INFO|IS5.1|javax.enterprise.system.container.web|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Creating virtual server server|#]
[#|2006-08-22T17:57:31.039+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|IS AVK Instrumentation disabled|#]
[#|2006-08-22T17:57:31.045+0800|INFO|IS5.1|javax.enterprise.system.core.security|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2006-08-22T17:57:31.117+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC JTS Extension] The last agent commit optimization is enabled.|#]
[#|2006-08-22T17:57:32.315+0800|INFO|IS5.1|com.stc.corba.any.UtilDelegate|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC CORBA Extension]EE/SE Corba Util delegate loaded|#]
[#|2006-08-22T17:57:33.730+0800|INFO|IS5.1|com.stc.corba.any.UtilDelegate|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC CORBA Extension]Enabling SE Corba support|#]
[#|2006-08-22T17:57:34.007+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5082: Exception running j2ee services: [java.lang.RuntimeException: java.lang.ExceptionInInitializerError]|#]
[#|2006-08-22T17:57:34.008+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=0;|CORE5091: Error executing J2EE server ...
java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:351)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:754)
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:233)
at com.sun.enterprise.server.PEMain.run(PEMain.java:222)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:374)
at com.sun.enterprise.iiop.ORBMonitoring.<init>(ORBMonitoring.java:48)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:236)
... 9 more
Caused by: java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:368)
... 11 more
Caused by: java.lang.NullPointerException: No MBeanServer was returned by the MBeanServerFactory
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.getMBeanServer(MonitoringRegistrationHelper.java:83)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<init>(MonitoringRegistrationHelper.java:60)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<clinit>(MonitoringRegistrationHelper.java:55)
... 14 more
|#]
[#|2006-08-22T17:57:34.012+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5092: J2EE server reported following error: [java.lang.ExceptionInInitializerError] |#]
[#|2006-08-22T17:57:34.012+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5093: Error executing J2EE server |#]
[#|2006-08-22T17:57:34.013+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=1;|CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: com.sun.appserv.server.ServerLifecycleException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:235)
at com.sun.enterprise.server.PEMain.run(PEMain.java:222)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: com.sun.appserv.server.ServerLifecycleException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:763)
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:233)
... 7 more
Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:351)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:754)
... 8 more
Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:374)
at com.sun.enterprise.iiop.ORBMonitoring.<init>(ORBMonitoring.java:48)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:236)
... 9 more
Caused by: java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:368)
... 11 more
Caused by: java.lang.NullPointerException: No MBeanServer was returned by the MBeanServerFactory
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.getMBeanServer(MonitoringRegistrationHelper.java:83)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<init>(MonitoringRegistrationHelper.java:60)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<clinit>(MonitoringRegistrationHelper.java:55)
... 14 more
|#]
[#|2006-08-22T17:57:34.023+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Server Startup failed. Exiting...|#]
[#|2006-08-22T17:57:34.023+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Server shutdown in progress...|#]
[#|2006-08-22T17:57:34.024+0800|INFO|IS5.1|javax.enterprise.system.container.web|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|WEB0303: Stopping Tomcat.|#]
[#|2006-08-22T17:57:34.025+0800|WARNING|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=2;|CORE5061: Exception :
com.sun.appserv.server.ServerLifecycleException: WEB0106: An error occurred while stopping the web container
at com.sun.enterprise.web.PEWebContainer.stopInstance(PEWebContainer.java:536)
at com.sun.enterprise.web.PEWebContainerLifecycle.onShutdown(PEWebContainerLifecycle.java:65)
at com.sun.enterprise.server.ApplicationServer.onShutdown(ApplicationServer.java:400)
at com.sun.enterprise.server.PEMain.run(PEMain.java:255)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: LifecycleException: WEB0103: This web container has not yet been started
at com.sun.enterprise.web.WebContainer.stop(WebContainer.java:529)
at com.sun.enterprise.web.PEWebContainer.stopInstance(PEWebContainer.java:528)
... 9 more
|#]
Hopefully somebody can help me as I'm stuck with it for few days already. Thank you.This is what I got when I try to start the server from the directory logicalhost/is/domains/domain1/bin/
./startservAug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger <init>
INFO: Setting URL to http://localhost:18000
Aug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger isAlive
INFO: Opening connection to http://localhost:18000
Aug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger isAlive
INFO: Connection to http://localhost:18000 opened successfully.
Aug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger isAlive
SEVERE: Connection refused
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.Socket.connect(Socket.java:507)
at java.net.Socket.connect(Socket.java:457)
at sun.net.NetworkClient.doConnect(NetworkClient.java:157)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:365)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:477)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:214)
at sun.net.www.http.HttpClient.New(HttpClient.java:287)
at sun.net.www.http.HttpClient.New(HttpClient.java:299)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:792)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:744)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:367)
at com.stc.is.util.pinger.HttpOKPinger.isAlive(Unknown Source)
at com.stc.is.util.Ping.main(Unknown Source)
Aug 23, 2006 7:23:55 PM com.stc.is.util.Ping main
INFO: IS is not alive.
Startup failed.
any clue what is it about? -
Problems with Logical Components
Hi All,
I am having problems with Logical Components with our project. We are implemeents SAP HCM and we have defined a logical component Z_ERP for the ECC server. now when you look at the transaction from SOLAR02 it seems they also have a logical Component SAP Learning Solution that is assigned to them. what could be the cause of this???Hi Trevor,
If you brought them in from the Business Process Repository, the logical component is going to be the default one. If you want to use your own, you need to replace the default one with yours.
You can do this in SOLAR_PROJECT_ADMIN by going to the System Landscape tab > Systems tab > highlight the SAP Learning Solution logical component row > press F4 > replace it with Z_ERP.
If for some reason SAP Learning Solution isn't listed as a logical component you may have to add it, you can also just go to SOLAR02 > Edit > Replace Log. Comp > Enter SAP Learning Solution in the top box and Z_ERP in the bottom one > click Save.
regards,
Jason -
Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?
Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian -
Copy and Paste Problem in Dreamweaver CS5.5
Hi All,
I saw the posts for Dreamweaver CS4 for copy and paste problems. I tried all the suggestions but to no avail. My copy and paste would not work. Then I found what worked for me...
I went to Edit --> Keyboard Shortcuts --> and I changed from "Dreamweaver Standard" to "Dreamweaver Mx2004". For the moment, it is working. I am on XP Professional.
From the other posts the suggestions were...
Switch to Classic Mode
Delete the Configuration file
Uncheck "Enable related files"
It was a problem for sure, and hopefully I won't be back for this one :-) Good luckHello,
The problem has been solved by over writing the � font.properties � file in jre/lib/� .
The changes given as follows:
# Exclusion Range info.
# exclusion.dialog.0=0500-20ab,20ad-ffff
# exclusion.dialoginput.0=0500-20ab,20ad-ffff
# exclusion.serif.0=0500-20ab,20ad-ffff
# exclusion.sansserif.0=0500-20ab,20ad-ffff
# exclusion.monospaced.0=0500-20ab,20ad-ffff
That is, we comment the lines having Red foreground color. -
Problem with Logical Database DDF
Hey All,
I have a problem with Logical Database DDF.
In my program I am typing this
GET KNA1 based on selection screen. It is bringing back everything I want except BRAN1 whereby the field is ''. However in SE16 for KNA1 and for the same KUNNR, the field is populated with 'T180'
I am not understanding this?! I thought LDB where menat to make things easy!!I think it's not used by DDF.
so you must check it with:
check kna1-bran1 in s_bran1.
A. -
Hey there all,
I have been having a problem updating Logic Studio 9. My purchased version is 9.0 (full, not upgrade) and I tried to update to 9.1 a while ago. When I did it, I got this very strange error message that said there was a system error of some sort. This of course sent me in to a panic, however my system itself seems to be stable, so I can only assume this is a problem with the updated software.
Eventually, I deleted the updated software (which left 9.0 on my system), and since then (this was a WHILE ago), I've spent a lot of time trying to figure out what to do to be able to update the software. I can't tell you how many times I have uninstalled, reinstalled, and re-uninstalled the original disks. I just can't get the software updater to recognize that I uninstalled 9.1 so that I can re-download the software update. And for god know what reason, I am not able to connect to the downloads server to get the upgrade.
Can anyone tell me where/how/if I can fix this?? Logic 9.0 keeps crapping out on me. I'd like to have access to my songs, etc.hi, Colpanique.
A couple of ideas. Is your OS up to date? Are you running SL? It's better for LP9 than Leopard. Is LP9 registered?
Software updates sometimes have a proapp u/date. This is for Logic/final cut etc. If they aren't on your system, the later LP u/date might not install.
Another reason why LP 9 caps out is ram. I have LP8, and I know 9 requires more ram. 1G is at the low end, and might be insufficient for the OS and LP9. Run out of ram and the app will crash. This true if you load samples or drums etc,
If LP 9 isn't registered, the apple server won't let you get 9.1. I tried, as I wanted to go from 8 to 9 and bypass the bugs in LP 9.0. 9.1 is more stable.
Anyway, hope thsi is of some help. Good Luck. Scorpii Pirates. -
Problem with logic:equal tag when used with bean:write
Hi All,
I have a problem with logic:equal.When i tried to use the following piece of code its not working
<logic:equal name="var in session" value="<bean:write name='var in request'/>">
Do some thing
</logic:equal>
its not working i know we cant use nested tags
is thr any alternative instead of using a scripletA scriptlet expression is about all you can do.
<bean:define id="tempVar" name="var in request"/>
<logic:equal name="var in session" value="<%= tempVar %>">
...If you have a JSP2.0 container with EL enabled, then you could use an EL expression instead of the standard <%= expr %> -
Click 2 call and excel copy/paste problems
Recent posts from late May claim that the click to call issues were resolved in late may. Today is June 21/12 and I resolved the problem yesterday by un-installing the click to call program. Prior to that cut and copy requests were losing the marquee around copied cells and when target cells were right clicked the context menu did not include Insert Copied cells.
Some problems may have been addressed but the problem still exists. It's too bad because click to call was a good feature.
Solved!
Go to Solution.The problem was identified and fixed already in an update to the Click to Call toolbar in April: http://blogs.skype.com/garage/2012/04/skype_click_to_call_fix_for_of.html
*Best Solution* Download the new version of Skype Click to Call. It’s the quickest way to solve the copy & paste problem you are experiencing. Go to http://www.skype.com/intl/en-us/get-skype/on-your-computer/click-to-call/windows/ and click Download Now.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
Cutting and pasting audio in logic pro 8
OK just would like to know if cutting and pasting audio in logic pro 8 is as tedious as it is in logic pro 7.
Thanks
Djed19mrsandsteve wrote:
but it is normalised and in the sample editor?
Looks like it is normalized to the infinity
Can you audition anything at all when play this audio region ?
!http://img59.imageshack.us/img59/4967/aglogo45.gif!
Maybe you are looking for
-
How can I transfer information from one ipad to another?
how can I transfer information from one ipad to another ?
-
What is the best way to get sound to external monitor?
Okay I understand that to get video from my mbp to lcd tv, I can hook it up with a dvi to hdmi cable. But how do I get sound to the tv? what would be the best way to go about this
-
Hi. Just wondering why Premiere Elements 11.0 did not include DvD Menu Templates. Instead, after you choose one, they ask you to download it from the web. Does anyone have a link for these menus? All my work computers are not on line for internet con
-
How do I extract the BODY of a POST request?
How do I extract the BODY of a POST request? Is this possible?
-
XML InputSource and RMI MarshalException
Hi all, I have a session EJB that creates an XML data structure as an org.xml.sax.InputSource. This object should then be passed on to stylesheet transformation in web container. I am getting the following error because InputSource is not serializabl