Patch 10 and 11 Install Problems

My application worked very successfully, using the servlet with all patches up to and including 9 using the 1.1 Jinitiator versions. I wanted to look at the time zone features and applied patch 10, and then 11. The servlet test appears to work in the new patches 10 and 11.
Using the latest 1.1 Jinitiator in either patch 10 and 11, I get "92102 - Negative or zero content-length" when starting the application. Does anyone know what this means, and/or what cures the problem?
Using the 1.3 JInitiator, I get "frm-92150 Web Client Version too New" I have not seen this one before either and scant reference to it - only on Solaris - with solutions not applicable to Windows 2000. Again any ideas are welcome.
Many thanks,

It's worth clearing the JInitator Cache to try and get rid of the Client too New message. The other error is due to a problem in the contents of the HTTP header - We've only seen that with IE on Mac and the Apple MRJ in the past - double check that you are using the correct Jinit 1.1 version for those patches.
If clearing the cache does not fix the client too new then try with one of the other JARS e.g f60all rather than f60all_jinit. It may be that the JARs are out of sync with the Server - for instance if something had one of the JARs open when you installed so it was not overwritten with the new version.

Similar Messages

  • OMS Patch 17513525 install problem

    Since yesterday there is a Patch for OMS available. I'm trying to install it, but I keep getting the same problem.
    I have configured my ORACLE_HOME and PATH according to README:
    [oracle@oemcc12 17513525]$ echo $PATH
    /usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/u01/app/oracle/Middleware12cR3/oms/bin:/u01/app/oracle/Middleware12cR3/oms/OPatch:/tmp/ded/
    [oracle@oemcc12 17513525]$ echo $ORACLE_HOME
    /u01/app/oracle/Middleware12cR3/oms/
    opatchauto apply -analyze says that everything is OK, but during the apply I get following:
    To complete the session, please execute the following step(s):
    [Jan 16, 2014 9:38:38 AM]    Step 1. On host oemcc12.vm.net run below command(s) as user "oracle":
                                 /u01/app/oracle/Middleware12cR3/oms/OPatch/opatchauto checkApplicable -ph /tmp/ded/17513525 -oh /u01/app/oracle/Middleware12cR3/oms -invPtrLoc /u01/app/oracle/Middleware12cR3/oms/oraInst.loc
                                 Step 2. On host oemcc12.vm.net run below command(s) as user "oracle":
                                 NOTE: Please replace %EM_REPOS_PASSWORD% with credential for OMS repository SYSMAN user.
                                 /u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service swlib -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/swlib/multioms -core -sysman_pwd xxxxxx
                                 Step 3. On host oemcc12.vm.net run below command(s) as user "oracle":
                                 NOTE: Please replace %EM_REPOS_PASSWORD% with credential for OMS repository SYSMAN user.
                                 /u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service procedures -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/procedures/linuxpatch/PatchLinux.xml -core -sysman_pwd xxxx
                                 Step 4. On host oemcc12.vm.net run below command(s) as user "oracle":
                                 /u01/app/oracle/Middleware12cR3/oms/OPatch/opatchauto commit -id 17513525 -oh /u01/app/oracle/Middleware12cR3/oms -invPtrLoc /u01/app/oracle/Middleware12cR3/oms/oraInst.loc
    To continue, OPatch will do the following:                                                                                                                                                                                       [Patch and deploy patch(es) binaries]   : Apply patch(es) [ 17513525 ] to Oracle Home "/u01/app/oracle/Middleware12cR3/oms";                                                                                                                                               Apply RCU artifact with patch "/u01/app/oracle/Middleware12cR3/oms/.patch_storage/17513525_Jan_13_2014_07_45_01/original_patch";                                                                                                 Register MRS artifact "swlib";                                                                                                                                                                                                   Register MRS artifact "procedures"                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       Do you want to proceed? [y|n]                                                                                                                                                                                                    y                                                                                                                                                                                                                                User Responded with: Y                                                                                                                                                                                                                                                                                                                                                                                                                                            Applying patch "17513525" to Oracle Home "/u01/app/oracle/Middleware12cR3/oms"...                                                                                                                                                Please monitor OPatch log file: /u01/app/oracle/Middleware12cR3/oms/cfgtoollogs/opatch/17513525_Jan_16_2014_09_33_25/apply2014-01-16_09-35-04AM_11.log                                                                                                                                                                                                                                                                                                            Updating repository with RCU reference file "/u01/app/oracle/Middleware12cR3/oms/.patch_storage/17513525_Jan_13_2014_07_45_01/original_patch"                                                                                                                                                                                                                                                                                                                     Registering service "swlib" with register file "/u01/app/oracle/Middleware12cR3/oms/sysman/metadata/swlib/multioms"...                                                                                                                                                                                                                                                                                                                                            Some error occurred during update MRS action. Please refer individual log file(s) for details.                                                                                                                                   Log file location: /u01/app/oracle/Middleware12cR3/oms/cfgtoollogs/opatch/2014-01-16_09-33-24AM_SystemPatch_17513525_1/emctl_register_swlib_2014-01-16_09-38-33AM.log                                                                                                                                                                                                                                                                                             To complete the session, please execute the following step(s):                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     Step 1. On host oemcc12.vm.net run below command(s) as user "oracle":                                                                                                                                                            /u01/app/oracle/Middleware12cR3/oms/OPatch/opatchauto checkApplicable -ph /tmp/ded/17513525 -oh /u01/app/oracle/Middleware12cR3/oms -invPtrLoc /u01/app/oracle/Middleware12cR3/oms/oraInst.loc                                                                                                                                                                                                                                                                    Step 2. On host oemcc12.vm.net run below command(s) as user "oracle":                                                                                                                                                            NOTE: Please replace %EM_REPOS_PASSWORD% with credential for OMS repository SYSMAN user.                                                                                                                                                                                                                                                                                                                                                                          /u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service swlib -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/swlib/multioms -core -sysman_pwd %EM_REPOS_PASSWORD%                                                                                                                                                                                                                                                          Step 3. On host oemcc12.vm.net run below command(s) as user "oracle":                                                                                                                                                            NOTE: Please replace %EM_REPOS_PASSWORD% with credential for OMS repository SYSMAN user.                                                                                                                                                                                                                                                                                                                                                                          /u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service procedures -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/procedures/linuxpatch/PatchLinux.xml -core -sysman_pwd %EM_REPOS_PASSWORD%                                                                                                                                                                                                                                                                                                                                                                                                                                                               
    Step 4. On host oemcc12.vm.net run below command(s) as user "oracle":
    /u01/app/oracle/Middleware12cR3/oms/OPatch/opatchauto commit -id 17513525 -oh /u01/app/oracle/Middleware12cR3/oms -invPtrLoc /u01/app/oracle/Middleware12cR3/oms/oraInst.loc
    Copying all logs to: /u01/app/oracle/Middleware12cR3/oms/cfgtoollogs/opatch/2014-01-16_09-33-24AM_SystemPatch_17513525_1
    Patching summary:
    Following patch(es) are successfully applied (Oracle home:patch list):
    /u01/app/oracle/Middleware12cR3/oms:17513525
    [ Error during Patch and deploy patch(es) binaries Phase]. Detail: Some error occurs during deploying the MRS artifact for service "{0}".
    opatchauto failed: opatchauto failed to execute some of the OMS operations. Please refer log file(s) for details.
    Log file location: /u01/app/oracle/Middleware12cR3/oms/cfgtoollogs/opatchauto/17513525/opatch_oms_2014-01-16_09-33-29AM_deploy.log
    Recommended actions: Please check the opatch, opatchauto, artifact log files for the failed MRS artifact action(s) and contact Oracle Support with the logs.
    opatchauto failed with error code 244
    [oracle@oemcc12 17513525]$ emctl start oms
    Oracle Enterprise Manager Cloud Control 12c Release 3 
    Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    Starting Oracle Management Server...
    Starting WebTier...
    WebTier Successfully Started
    Oracle Management Server is Down. PBS and Console both may not be up.
    After that I can not start my OMS.
    Rollbacking  with opatchauto rollback -id xxxx  doesnt work. I had to rollback it with opatch rollback -id xxxx. After that I'm able to start the OMS.
    By execution off some steps I also get an error:
    [oracle@oemcc12 ~]$ /u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service swlib -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/swlib/multioms -core -sysman_pwd xxxxxx
    Oracle Enterprise Manager Cloud Control 12c Release 3 
    Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    Starting output for debug mode.
    Debug logs will be written to /u01/app/oracle/Middleware12cR3/em/EMGC_OMS1/sysman/log/emctl.log
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/as/jmx/framework/PortableMBeanFactory
        at oracle.sysman.emctl.util.EmctlUtil.getReposConnUsingAdminServer(EmctlUtil.java:777)
        at oracle.sysman.emctl.util.EmctlUtil.getReposConn(EmctlUtil.java:719)
        at oracle.sysman.emctl.extensibility.EmctlMdsUtil.getReposConnection(EmctlMdsUtil.java:69)
        at oracle.sysman.emctl.extensibility.EmctlMetadataService.main(EmctlMetadataService.java:152)
    Caused by: java.lang.ClassNotFoundException: oracle.as.jmx.framework.PortableMBeanFactory
        at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
        ... 4 more
    [oracle@oemcc12 ~]$ /u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service procedures -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/procedures/linuxpatch/PatchLinux.xml -core -sysman_pwd xxxxxxx
    Oracle Enterprise Manager Cloud Control 12c Release 3 
    Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    Starting output for debug mode.
    Debug logs will be written to /u01/app/oracle/Middleware12cR3/em/EMGC_OMS1/sysman/log/emctl.log
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/as/jmx/framework/PortableMBeanFactory
        at oracle.sysman.emctl.util.EmctlUtil.getReposConnUsingAdminServer(EmctlUtil.java:777)
        at oracle.sysman.emctl.util.EmctlUtil.getReposConn(EmctlUtil.java:719)
        at oracle.sysman.emctl.extensibility.EmctlMdsUtil.getReposConnection(EmctlMdsUtil.java:69)
        at oracle.sysman.emctl.extensibility.EmctlMetadataService.main(EmctlMetadataService.java:152)
    Caused by: java.lang.ClassNotFoundException: oracle.as.jmx.framework.PortableMBeanFactory
        at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
        ... 4 more
    Is there someone else, having the same problem...
    What could be the solution?

    Hi, in the meantime i have updated my db version to 11.2.0.4.
    Now I have this:
    [oracle@oemcc12 OPatch]$ ./opatch version
    OPatch Version: 11.1.0.10.2
    [oracle@oemcc12 OPatch]$ ./opatch lsinv
    OPatch Version : 11.1.0.10.2
      OUI  Version : 11.2.0.4.0
    The OPatch version is not applicable for current OUI version.
    Since OUI Version starts with 11.2, Please go to 'My Oracle Support' and get right OPatch 11.2.*.*.* based on patch 6880880, release version 11.2.0.0.0 and appropriate platform.
    OPatch succeeded.
    After installing the latest version of Opatch I can not use the opatchauto option:
    [oracle@oemcc12 OPatch]$ ls -l
    total 140
    drwxr-xr-x 3 oracle oinstall  4096 Dec 13 21:53 crs
    drwxr-xr-x 2 oracle oinstall  4096 Dec 13 21:53 docs
    -rwxr-xr-x 1 oracle oinstall 23695 Dec 13 21:53 emdpatch.pl
    drwxr-xr-x 3 oracle oinstall  4096 Dec 13 21:53 jlib
    drwxr-xr-x 4 oracle oinstall  4096 Dec 13 21:53 ocm
    -rwx--x--- 1 oracle oinstall 31493 Dec 13 21:53 opatch
    -rwxr-xr-x 1 oracle oinstall 19867 Dec 13 21:53 opatch.bat
    -rwxr-xr-x 1 oracle oinstall 10056 Dec 13 21:53 opatchdiag
    -rwxr-xr-x 1 oracle oinstall  9352 Dec 13 21:53 opatchdiag.bat
    -rwxr-xr-x 1 oracle oinstall    49 Dec 13 21:53 opatch.ini
    -rwxr-xr-x 1 oracle oinstall  2576 Dec 13 21:53 opatch.pl
    drwxr-xr-x 4 oracle oinstall  4096 Dec 13 21:53 opatchprereqs
    drwxr-xr-x 3 oracle oinstall  4096 Dec 13 21:53 oplan
    -rw-rw-r-- 1 oracle oinstall  3064 Dec 17 21:38 README.txt
    -rw-r----- 1 oracle oinstall    26 Dec 13 21:53 version.txt
    According to readme:
    https://updates.oracle.com/Orion/Services/download?type=readme&aru=17010886#BABHIABC
    2 Prerequisites
    Ensure that you have the latest version of OPatch 11.1 on all OMS instance platform homes. (this should be updated)
    autopatching with this versions of Opatch(11.1) and OUI(11.2.0.4) is not possible. Is there any other way to this? Do I also need to update the Opatch to 11.2?
    In that case it's only possible to patch with "usual" opatch command.
    To be honest, I'm not willing to experiment, since last time i lost a lot of time trying to figure this out, specially when I had a problem, that my oms can't start after patching.
    Uploading the log file is not relevant now, because I'm now using different OUI and DB Version.
    Regards!

  • Downloading and Installing Problem of IOS 4.2  to IPad Wifi 3G 64 GB

    Hi there,
    I've tried downloading and installing IOS 4.2 trough ITunes to my IPad Wifi 3G 64 GB, but it always failed.
    Could someone tell me how to do it? The error message said that it took too long to download IOS 4.2 (12 Minutes) and the server has denied the action.
    Thanks.

    Hi IIIaass,
    I've done as your suggestion. My IPad and IPod Touch have the IOS 4.2 updates now. I'm very happy. Thank you again.
    I never thought that I would forget the fact that before downloading some software from Internet, I should disable my antivirus, firewall, anti spyware and cos.
    Now, if you don't mind for another question. Do you know why ITunes with Windows 7 has (PC) problem to recognize my whole songs I have in ITunes with Widows Vista (Notebook)? It is around 200 titles, which are missing.

  • Archive and install problems

    Hi:
    After filling out the Apple troubleshooting form, I followed the advice and took my machine to an authorized reseller/service center.  They recommended an archive and install, plus a new and larger HD(WD Caviar 750: he said it would not take a larger one), promised that nothing would change or be lost (the machine is used for 2 purposes only: 60,000 photos and email).  With so many images, I have an extensive keyword list which enables me to find them instantly using Adobe Bridge (CS 2).  Without the keywords, the images might as well be lost. Now, I have the new drive and the old 250G drive. 
    The technician called to say he was installing Leopard at no charge, rebuilding my library, defragmenting the hd, resetting my mail from pop to imap and that everything would work as before. 
    What doesn't work: mail notifies me constantly that the server has no certificate, that the server can't send the mail and sent mail often just sits.  Mail(I am mobile me subscriber) no longer auto completes even though that preference is checked.  Address book is empty.
    Bridge lost the keyword master structure which is kept in an xml file.  That file was empty.  I dragged the original xml file with all the keywords from an external back up hd into bridge on the new drive but nothing happened.  The words are there but bridge doesn't use the file.  Bridge shows only the default keyword list.  The images, however, retained their exif data and keywords. 
    When I open a folder of images, bridge now has to spend minutes rendering the thumbs.
    I realize this is an apple not an adobe forum but perhaps these symptoms reveal the solution. In addition, I don't have any leopard install disc so see that I now have no way to use hardware test or safe boot if necessary.  Even though I have my Tiger discs, the tech. insisted on installing Leopard from whatever disc he has, I guess.  I thought all the discs are registered to this machine and to me so not sure how that is ok. 
    Thanks for any suggestion.  I've searched the adobe forums but can find nothing for my version of the software, only for newer versions. 
    sorry this is so long.  I will be very grateful to anyone willing to take the time to wade through it.

    Great reply from Limnos, btw.
    I'd be tempted to try a Tiger Install, but you'd have to erase one of the drives.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Flash player download and install problem?

    i have problem downloading and installing Flash player in my laptop ,Adobe Flash Player download reaches 99% and stops i'm using windows xp and internet explore 8 help me out ?

    Hello,
    Welcome to Adobe Forums.
    You can downlado offline installer for Adobe Flash Player from here : http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
    Thanks,
    Vikram

  • Panther Archive and install problems

    I have a light grey screen with an apple logo on it after performing archive and install using Panther. Nothing else. Any ideas anybody....?
    I really am at a complete loss with this and its been several days now. I'm losing money and patience bigtime.
    Help..!

    Yes you can chose your system that way, but since you can't startup normally I feel you still have a problem. Next time it does it try things in Apple doc.#106464.
    I don't have any suggestions on Ext. FireWire HD's (don't get USB). I use a WesternDigital, but others in these forums don't care for that brand. Comp USA has quite a large selection. Online, Amazon does too as do other sites. Make sure you get an Ext HD that is bigger then your internal so you don't run out of space.
    Cheers!
    DALE
    Edit, I forgot you're in the UK,sorry for CompUSA reference.

  • Archive and Install problem (not enough disc space for another install)

    Alright, so I've got the blue screen. I tried getting rid of the APE stuff, and they were all successfully deleted, but it's still the blue screen. So I'm going to do the Archive/Install thing. My problem is that if I try to do an Archive and Install, I won't have enough space to do it. I have around 3.5 GB right now, but that's probably not enough to do another install.
    My only option I think is to go into single-user mode and manually remove my larger files. I have a back-up drive, and I tried removing all the stuff that's on the back-up drive from my computer, but all of them are listed as read-only.
    So is there a way to override permissions in the UNIX thing? Or is there another option for me with?
    Also I don't know if this matters, but I'm installing it from an external DVD drive and I'm doing it from PANTHER and not Tiger.
    Message was edited by: JollyWaffle

    ...anyone? I left the blue screen on overnight but it didn't do anything.

  • DOWNLOAD and INSTALL problems

    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name - download-west.oracle.com
    - Filename - Disk1, Disk2, Disk3
    - Date/Time - Saturday, Sunday, Monday - Aug. 3, 4, 5
    - Browser + Version - Internet Explorer 6.0
    - O/S + Version Windows2000 Server
    - Error Msg - No Msg
    After several attempts, finally I succeed to download the three files and to unzip them. But when I tried to run the installation program (the so-called Universal Installer) from
    Disk1 directory, it did not run it died! I repeated the entire procedure several times (I wasted three days playing with this) with the same result. How can you explain me this issue and what can I do in order to get Oracle9i successfully downloaded and installed?

    I'm having a similar problem except that instead of dying, I get an error message about an invalid staging area. I'm trying to install 9i on Windows XP. Any help would be appreciated!

  • Windows Update Automatically download patches and install

    We have found that some of our servers are automatically downloading patches from Internet using Windows Update and installing. This is not how our environment is configured to be. Is there a way to know what all servers in environment are configured to
    download and install patches automatically from Windows Update using a script may be.
    Thanks
    Vish
     

    Hi Vish,
    Is there a way to know what all servers in environment are configured to download and install patches automatically from Windows Update
    We will need to open Control Panel and go to Windows Update to see if the machine is set to automatically install updates. Here is a screenshot below:
    Here is a scripting forum below:
    The Official Scripting Guys Forum
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
    Best Regards,
    Amy

  • Downloading and installing problem

    I am trying to download and install Premiere Elements. It's been a huge hassle, but at last I've got to the stage where I get the message:
    Click the individual file links to download using your browser.
    http://esd.adobe.com/AdobeProducts/PRE/12/win64/PremiereElements_12_LS26_win64.7z
    http://esd.adobe.com/AdobeProducts/PRE/12/win64/PremiereElements_12_LS26_win64.exe
    I downloaded the first file (I have no idea where the system has put it)
    I downloaded the second (.exe) file and tried to execute it. I got the error message:
    The file archive part of Adobe Premiere Elements 12 is missing. You need all parts in the same folder in order to extract Adobe Premiere Elements 12. Please download all parts.
    What do I do now?

    Hi, Sandeep,
    Thanks for the response. After I posted, I downloaded the two files again, saving both in a defined folder. I then ran the .exe file and it all seemed to work OK.
    I appreciate your help. I also suggest that Adobe reviews the download mechanism - this was too difficult for ordinary users.
    Regards,
    Tony

  • TIGER/POWERBOOK 12" G4 - erase and install problems. please help..

    Hello,
    I have a powerbook g4 (the last of the powerbook 12"/ 80gb/1.5ghz to be released) with tiger installed.
    I have had a a crash x 2 when doing software updates. So I managed to get it going, to then back up to an external drive - to do an erase and install.
    Once I went to do the erase and install it failed, so I tried again and it seems to have done the erase. now my actual HD isn't visible as the select detination to install?
    So, I can't actually even attempt to install with no destination.
    any help would be most appreciated.
    thankyou

    suzannah-a:
    Unfortunately, it seems as if your HDD has failed. Try booting from the install disk, the go to the Utilities menu and launch Disk Utility. If the HDD shows up in the sidebar, you should reformat it. (Directions below). If it does not show up, you need to replace the HDD. Post back for a list of available HDDs and vendors, step by step directions and additional tips.
    If your HDD shows up follow these directions to reformat and erase:
    Formatting, Partitioning Erasing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    Boot from the install CD holding down the "C" key.
    Select language
    • Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select Partition tab in main panel. (You are about to create a single partition volume.)
    • Click on Options button
    • Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
    • Click OK
    • Select number of partition in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    • Type in name in Name field (usually Macintosh HD)
    • Select Volume Format as Mac OS Extended (Journaled)
    • Click Partition button at bottom of panel.
    • Select Erase tab
    • Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    • Check to be sure your Volume Name and Volume Format are correct.
    • Click Erase button
    • Quit Disk Utility.
    If you are able to do the reformat and erase, you can then proceed to restore from your backup, or to install the OS from disk.
    Please do post back with an update on how it goes, and with further questions or comments, if any.
    cornelius

  • Archive and Install problem

    So the mouse on my computer didn't work and, following the directions on the website, I went ahead and tested the mouse (which worked) so then the page recommended I put in the startup disk and do "Archive and Install" but whenever that process starts it says, "Preparing Disk" (or something like that) it says "There were errors installing the software." I tried the Disc Repair utility and tried to archive and install again, with the same results.
    ANY IDEAS?!?! I don't want to erase my hard drive completely!!
    Thanks,
    John

    Steve,
    It's a USB optical mouse I believe. The issue started when my Norton anti-virus program expired now every time I boot up the cursor appears in the upper-right hand corner of the screen, but I cannot move it (althought the light on the bottom is on). Using keyboard shortcuts I dragged the Norton folder to the trash, but have been unable to empty it and there is still this QuickProtect program that tries to load at boot-up every time I use the system.
    Essentially when i boot up it looks normal, but I cant use my mouse...and there is always an error message about Norton AntiVirus being old!
    John

  • Server 2012 Patch and Certificate Problems - GPO Breaking Server

    We built some Server 2012 R2 servers, the first ones in our organization. We were able to install SQL 2012 with no issues. We are required by organization policy to harden our computers. But when tried to install WSUS patches we began noticing several problems...messages
    like "the signer of the message is invalid or not found (0x8006002)" and "revocation process could not continue - the certificate(s) could not be checked) (0x800B010E and in event viewer 2148204814). We can only run Internet Explorer if we go
    to an admin command prompt, change to "program files\internet explorer" and type "iexplore.exe". Obviously we can not make these servers live until this problem is fixed. Two of us have spent two weeks on this. We can join a hardened
    Server 2012 R2 image to the domain and things still work. The point that it breaks at is when we apply our default domain GPO. It doesn't matter if we apply other GPOs singly or en masse, it's the default one that is breaking it. If we unapply the default GPO,
    it's still broken, so it's something that is not undone by removing the GPO. So while the breaking GPO is known, nothing we have tried has enabled us to narrow down what in the GPO is breaking this. We compared RSOPs on a working and non working image and
    they are the same.
    Something else worth noting is that the default domain GPO does not break our 2003 or 2008 servers. So the offending setting affects Server 2012 differently.
    Any ideas on what this setting might be or how to narrow the plethora of settings in our GPO?
    This build has IE 11. IE64 works in metro mode but both IE64 and 32 don't work in desktop mode.
    WSUS says certs for wuident.cab are not found but we've manually loaded them into the local store.
    As a side note, Server 2012 needs to have access to another CRL list in addition to what prior versions of Windows Server needs, towit: http;//www.microsoft.com/pkiops/crl
    Any help would be greatly appreciated.
    Ben JohnsonWY

    Hi Ben,
    >>IE is still not working right. Still working that one
    Based on your description, were there any related error event id logged? What’s the message when we opened IE normally?
    For this involves IE and for better help, we can also ask for advice in the following forum.
    Internet Explorer 8, 9, 10, 11 Preview
    http://social.technet.microsoft.com/Forums/ie/en-US/home?forum=ieitprocurrentver
    Best regards,
    Frank Shen

  • I purchased Lightroom 5 and tried to download and installing problem

    I purchased Lightroom 5 and tried to install the same to my Laptop, due to server connectivity problem i could not complete the download or the downloaded version is not opeing. I tried it to download againg/repeatedly. now its show i cant downlaod the program as i tried to downlaod it 5 times?
    Pls help me to download the program and intsall the same properly in to my computer.

    Hi Jiyamenon,
    Please confirm from where you are trying to download.
    Also the operating system you are using.
    Please post a screenshot of problem if any.
    Regards,
    Sumit Singh

  • Erase and Install problems after fixing 10.4.5 update issues

    Initially, I had permission issues after upgrading to 10.4.5. After hours of reconfiguring user accounts, I thought that maybe the best overall solution would be to erase and reinstall Tiger. I am an old PC user so reformatting the hard drive can be a logical answer.
    I backed up all of files and ran disk utility and erased with the "0s" option. I am using my install disc of 10.4.2. I have tried several start modes, single-user, C, Option, verbose and still run into the same problem. The installation does not go beyond verifying the drive to install it on. I have tried some steps in the disk utility.
    I know that there is probably a command line to get the installation disc to recognize the hard drive but I am not experienced in Unix commands.
    Does anyone have any suggestions? I am in an endless circle of starting, quitting, and restarting the installation just to get to Disk Utility. So far I have not had any problems with Macs or with Tiger. I am a Mac convert.
    Thank you very much.

    Don't know what exactly fixed it, but a few weeks down the line and several random updates later (10.4.4, Quicktime, various apps) I tried the speakers again and they are working fine - the system recognises them, alerts work fine etc.

  • Patching and Provisioning Problem

    Hi
    Has anybody had the problem when applying a patching patch for em 10.2.0.5 aand the deployment procedures do not update, the version number is old and the date is last year. this is on a windows system and trying to apply the latest pack 905592 i think. I have uninstalled and reinstalled this patch but the procedures are not updating.
    Thanks

    Try reading http://oemgc.wordpress.com/2010/04/14/new-recommended-bundle-patch-apr-2010-9405592-for-patch-automation-on-em-10-2-0-5/
    perhaps it gives you some more clues
    Regards
    Rob

Maybe you are looking for