Patch installtion issue

i have downlaod a lastest critical patch of oracle for 11g .7 version now i have been one problem during installation i have read redme when they follwing steps
Follow these steps:
Cleanly shut down all processes running from the ORACLE_HOME.
Set the ORACLE_HOME environment variable to the correct Oracle home that needs to be patched.
set ORACLE_HOME=<Oracle Home Path> Go to the directory where you downloaded the patch:
cd 8343061 Ensure that the directory containing the OPatch script appears in your PATH setting. Enter the following command to run OPatch:
opatch apply Inspect the opatch<timestamp>.log file generated in %ORACLE_HOME%\cfgtoollogs\opatch for any errors.
but my problem there no such directory opatch even in oracle home. i have a bat file will i directly run that file. but i came to know that patch is successfully install or not plz help in this regard

i have extract opatch in oracle home when i issue opatch version i rasied follwoing error
D:\app\remote\product\11.1.0\db_1\OPatch>OPATCH VERSION
Invoking OPatch 11.1.0.6.6
Oracle Interim Patch Installer version 11.1.0.6.6
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Syntax Error... Unrecognized Command or Option: 1st argument must be one of the
following:
apply
napply
rollback
nrollback
lsinventory
lsinv
query
util
prereq
version
-help
-h
Please use the option 'opatch -help' to get correct syntax
OPatch failed with error code = 14
D:\app\remote\product\11.1.0\db_1\OPatch>

Similar Messages

SCCM 2012 patch compliance issue

Hi All,
In my organization we are facing patch compliance issue.
in my clients all patches are installed and sent the state messages to MP.however most of the clients are having 0% compliance are showing in report.
in overall compliance report it is showing "compliance sate unknown" for most of the clients.
done the software update scan cycle, no errors in WUAhandler.log and windowsupdate.log
updatestore.log etc.files. however same location only few machines are showing 100% compliance and most of the machines are showing non-compliance (0% compliance)
please help us to resolve the issue.
Note: all machines are patches installed successfully. only report is showing "compliance state unknown"

How much time are you allowing? State messages are only submitted every 15 minutes by the client and information in the console is summarized every 1 hour (both by default); i.e., none of this is instantaneous.
Reports will reflect the up to info though. Have you directly examined WMI on a target system to verify it's patch compliance state?
Jason | http://blog.configmgrftw.com | @jasonsandys

OSFM & Discrete Manufacturing Patch G Issues

Hello Community!!
Would like to know whether anyone had issue when applying discrete mfg patch G (DM_PF_G : Patch 2133107) which we applied to get upto current version for OSFM.
I faced these specific problems and would like to know if anyone faced this issue.
1) While applying the Patch, adadmin failed in between due to following error:
-------------- E R R O R L O G I N F O -----------------
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFRESGEN on worker 1.
FAILED: file WFRESGEN on worker 2.
FAILED: file WFRESGEN on worker 3.
FAILED: file WFRESGEN on worker 4.
FAILED: file WFRESGEN on worker 5.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Start time for file is: Wed Feb 06 2002 18:45:42
/oradev/test/testappl/fnd/11.5.0/bin/WFRESGEN APPS/APPS 0 Y DATABASE @FND:resource/wfver.msg
Logfilename : /oradev/test/testappl/admin/TEST/log/l1117586.req
Report filename : /oradev/test/testappl/admin/TEST/out/o1117586.out
wferr:
- WFRESGEN_FAILED
- WFUPI_FAIL MESSAGE=ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.WF_CORE" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
STATEMENT=BEGIN WF_CORE.SESSION_LEVEL:=0; WF_CORE.UPLOAD_MODE:='FORCE'; END;
AD Worker error:
The above program failed with error code 1.
See the AD Worker log file and/or the program log file for details.
work02.log
Start time for file is: Wed Feb 06 2002 18:45:42
------------------ E N D O F E R R O R L O G I N F O -----
I had TAR with Metalink and we did go back and forth and could not resolve this issue till i found that the patch zip file p2133107_11i_SOLARIS.zip had the wfcoreb.sql and wfcores.sql script files for package spec and body which caused the problem.
Analyzing both spec and body, i found that the body had 4 parameters
procedure Get_Error(err_name out varchar2,
err_message out varchar2,
err_stack out varchar2,
maxErrStackLength in number default 4000);
whereas the spec had only 3 parameters.
procedure Get_Error(err_name out varchar2,
err_message out varchar2,
err_stack out varchar2)
Discrepancy between spec and body was the cause of the worker to fail. By adding the missing parameter i was finally able to continue with the install.
I even checked the latest update to this patch at Metalink and still find that the above error is not fixed.
ID:1235184 Patchset::2133107 README
Patch 11i.DMF_PF.G
Product:Discrete Manufacturing
Platform:Sun SPARC Solaris
Language:American English
Translations Required
Version:11i
Last updated:01-MAR-2002
Size:137M (144628287 bytes
Would like to know if anyone else had a similar issue while applying this patch.
Thanks
Gaja

Hello Community!!
Would like to know whether anyone had issue when applying discrete mfg patch G (DM_PF_G : Patch 2133107) which we applied to get upto current version for OSFM.
I faced these specific problems and would like to know if anyone faced this issue.
1) While applying the Patch, adadmin failed in between due to following error:
-------------- E R R O R L O G I N F O -----------------
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFRESGEN on worker 1.
FAILED: file WFRESGEN on worker 2.
FAILED: file WFRESGEN on worker 3.
FAILED: file WFRESGEN on worker 4.
FAILED: file WFRESGEN on worker 5.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Start time for file is: Wed Feb 06 2002 18:45:42
/oradev/test/testappl/fnd/11.5.0/bin/WFRESGEN APPS/APPS 0 Y DATABASE @FND:resource/wfver.msg
Logfilename : /oradev/test/testappl/admin/TEST/log/l1117586.req
Report filename : /oradev/test/testappl/admin/TEST/out/o1117586.out
wferr:
- WFRESGEN_FAILED
- WFUPI_FAIL MESSAGE=ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.WF_CORE" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
STATEMENT=BEGIN WF_CORE.SESSION_LEVEL:=0; WF_CORE.UPLOAD_MODE:='FORCE'; END;
AD Worker error:
The above program failed with error code 1.
See the AD Worker log file and/or the program log file for details.
work02.log
Start time for file is: Wed Feb 06 2002 18:45:42
------------------ E N D O F E R R O R L O G I N F O -----
I had TAR with Metalink and we did go back and forth and could not resolve this issue till i found that the patch zip file p2133107_11i_SOLARIS.zip had the wfcoreb.sql and wfcores.sql script files for package spec and body which caused the problem.
Analyzing both spec and body, i found that the body had 4 parameters
procedure Get_Error(err_name out varchar2,
err_message out varchar2,
err_stack out varchar2,
maxErrStackLength in number default 4000);
whereas the spec had only 3 parameters.
procedure Get_Error(err_name out varchar2,
err_message out varchar2,
err_stack out varchar2)
Discrepancy between spec and body was the cause of the worker to fail. By adding the missing parameter i was finally able to continue with the install.
I even checked the latest update to this patch at Metalink and still find that the above error is not fixed.
ID:1235184 Patchset::2133107 README
Patch 11i.DMF_PF.G
Product:Discrete Manufacturing
Platform:Sun SPARC Solaris
Language:American English
Translations Required
Version:11i
Last updated:01-MAR-2002
Size:137M (144628287 bytes
Would like to know if anyone else had a similar issue while applying this patch.
Thanks
Gaja

10.2.0.2 Patch Upgrade issue

hi,
SAP was installed on 10.2.0.1 (SuSe Linux Ent 10 ) . now i am applying patch upgrade to 10.2.0.2. when i am doing patch the below problem was occured,
"Unable to create new central inventory at location /oracle/orainventory. A non empty inventory already exists at this location. Please select another location or clean the inventory at /oracle/orainventory."
please help me on this issue
Regards
Ramesh

Hai,
Please check the oraInst.loc file has the correct entry or not.
File oraInst.loc should have the entries similar to the below:
inventory_loc=/oracle/SID/oraInventory
inst_group=dba
Check the permissions of this file as well, atleast the file should have read access to others.
Also check the permissions of /oracle/SID/oraInventory, it should be owned by ora<sid> user and group dba.
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Feb 23, 2009 12:05 PM

ACS SE 4.1.1.23 patch 5 issue with users

HI There, I am facing very weired issue with ACS SE 4.1.1.23 patch 5. I am trying to add users in ACS it is added successfully but I can not see these users when I click list all users.
But I can see users are increasing in groups when I add users..but when I do list all users it say there are no users defined. and I tried to login with newly created users from devices ....I am able to login with those new users.....
also when I go to that particular group in which I added new users....and say list users in group...I get message from ACS saying that "can not read users from group" ....
what could be issue any one has any idea....customer complained that he was unable to login to devices...with the users created on ACS...when I saw there was no users in database....then I added 2-3 users by looking at old passed and failed authentication... but I dont know how users got deleted automatically...even I tried to see appliance audit logs...could not see any thing which indicates someone deleted users...
please help me to solve this issue..
Thanks

Issue resolved. The CRL that was being parsed from the cert was one level higher than the CRL that needed to be checked. The User CRL was ppointing to the Intermediate CA's CRL. I had to manually change the URL from this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20Intermediate%20CA%201.crl
to this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20User%20CA%201.crl
Mark

ORACLE 10g patch installtion error in AIX 6.1

error like ''oracle universal installer has detected that there are processes running inthe currently selected oracle home.the following processes need to be shutdown before continuing : java ksh

Hi,
is known issue, see Metalink ID 980602.1. Problem is fuser on AIX. IBM has released AIX patch to solve the issue: IZ67400: FUSER GIVES INCORRECT PIDS WITH -X OPTION.
Another workaround is:
As root:
1) rename fuser
mv /usr/sbin/fuser /usr/sbin/fuser_renamed
2) touch /usr/sbin/fuser
3) chmod +x /usr/sbin/fuser
As oracle software owner:
1) Try to install the patchset (fuser can now return nothing, hence the Installer should continue)
After successful install, as root:
1) rename fuser back to its original name
mv /usr/sbin/fuser_renamed /usr/sbin/fuser
Herald ten Dam
htendam.wordpress.com

9.0.3 Patch - General issues

I'm opening up a thread so any issues with latest 9.0.3 patch can be discussed in one place.
If there are specific items with Structured FM or DITA, please use the thread in the Structured FM Forum - http://forums.adobe.com/thread/493912
This patch should update your version to FM9.0p250.

They did not fix one of the main issues, as reported here: http://forums.adobe.com/message/1927435#1927435
Several Unicode OTF/TTF fonts are still written as Times Roman to CMYK PDFs. I created a new test PDF using FM9.0.3, which you can download here:
http://www.meissner-dokuteam.de/Files/Frame/Unicode_Font_Test_fm903_cmyk_rgb.pdf
Here I'm only using roman text. I encounter the same problems with several chinese and japanese fonts, which either completely don't work, or only certain fonts out of a family don't work. Interesting: In most cases the "W5" or "Medium" versions of Asian fonts fail.
Bernd

Patched Deployments issue: "waiting for another installation to complete"

I have some percent of computers which runs into above state in monthly patch deployments. I could minimal information from execmgmr, udpatesdeployment.log,
CliSpy and Client Center etc tools but that doesn’t offer much help to nail down the issue completely. Have any of you dealt to resolve such issue successfully ? Is there any efficient way to handle this ?
It seems I have
DeploymentA, waiting for the completion of DeploymentB, which in turn waiting for the completion of
DeploymentC. Is there any better approach I could take to nail down and resolve the issue. One of my finding is, KB articles installs (SCCM R3, SCCM Asset Intelligence) causes these issue as they restart (upgrade sort of execution) the
agent during the execution, I need to confirm these
Vasu

Hi Vasu,
This issue can be caused by a deployment was previously deployed and was now deleted. This was because the clients finished installation
and wanted to notify the Server that it is done, but since the deployment was deleted, it couldn’t Notify its progress to the site server and the CCM_DeploymentTaskEx1 got stuck.
Please use the following scripts to delete the instance to test this issue.
strService = "CcmExec"
strComputer = "."
Set objWMIService = GetObject("winmgmts:" & "{impersonationLevel=impersonate}!\\" & strComputer & "\root\CCM\SoftwareUpdates\DeploymentAgent")
Set colWMISettings = objWMIService.ExecQuery("Select * from CCM_DeploymentTaskEx1")
For Each objWMISetting in colWMISettings
objWMISetting.AssignmentId = ""
objWMISetting.JobId = "{00000000-0000-0000-0000-000000000000}"
objWMISetting.Put_
Next
'Stop service
Set objWMI = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set objService = objWMI.Get("Win32_Service.Name='" & strService & "'")
objService.StopService()
WScript.Sleep 10000 ' Pause to allow service to stop
'Start service
Set objService = objWMI.Get("Win32_Service.Name='" & strService & "'")
objService.StartService()
WScript.Sleep 10000 ' Pause to allow service to start
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.

Remote patch management issues - AD required??

We are using ZCM10 and we're having problems with deploying patches remotely. That is running PM after hours by waking a PC, logging, deploying the patch and closing down. Something I was given to believe that ZCM would handle.
I'm being told by colleagues the reason that its not working is that we don't have AD and therefore MS patches won't work. We only have eDirectory for logins/GroupWise/ authentication etc.
So is it really necessary to have a domain running so that ZCM can wake up PC's login, deploy the patches, remediate and move on?
Many thanks

AD is by no means required for any MS Patches using ZPM or even not
using ZPM. Best to post details on the failures and ZCM version so your
issue can troubleshot.
Also try to narrow down your issue.
Is the Issue the WOL? Logging On? The Patches Applying ever, even when
the PC is manually powered on and logged into?
On 1/6/2011 12:36 PM, turners wrote:
>
> We are using ZCM10 and we're having problems with deploying patches
> remotely. That is running PM after hours by waking a PC, logging,
> deploying the patch and closing down. Something I was given to believe
> that ZCM would handle.
>
> I'm being told by colleagues the reason that its not working is that we
> don't have AD and therefore MS patches won't work. We only have
> eDirectory for logins/GroupWise/ authentication etc.
>
> So is it really necessary to have a domain running so that ZCM can wake
> up PC's login, deploy the patches, remediate and move on?
> Many thanks
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Patch installation issue on ACS 5.1

Hi,
I have one ACS server (5.1) in the Dev environment. I am trying to install the patch 5-1-0-44-6 before upgrading to 5.3. When I try to install the patch, the server doesn't do anything, after few hours, I dodn't see any changes on the server. Here is my version info:
Cisco ACS VERSION INFORMATION
Version : 5.1.0.44
Internal Build ID : B.2347.EVAL
If anybody experinced the same problem or know how to solve this issue, please share.
Thanks!

I have managed to bind the certificate now. I went to check the link given to me by the CA and found two certificates, one in PKCS#7 and X509 format. I tried the X509 format and the ACS successfully binded it.
It works but I want to know how it all works.PKCS#7 includes the Intermediate CA while X509 doesn't. The X509 certificate comes with a message stating that Intermediate CA needs to be installed seperately. I have found it and can install it, but what is it used for? I also found the CA certificate. So there is three certificate, CA, Intermediate CA and X509. How does it all come together, or does anyone have a link on a good guide on how it works?
I am trying to configure wireless authentication using PEAP-MSCHAPv2 using Cisco WLC, ACS as RADIUS server and Windows AD as the database. Is there anything I need to know about certificates in this deployment?

MS15-10 kb3013455 Feb 15 Patching Font issues

Please let us know if any one has faced issues on Terminal servers for Font issues after installing MS15-10 - KB3013455 Feb15 Patch
Resolution and font issues, is there a fix for this
We had issues after installing this patch in our environment, had to uninstall
OS Details
Microsoft® Windows Server® 2008 Enterprise without Hyper-V
6.0.6002 Service Pack 2 Build 6002
32 bit

There's a patch now: KB3037639. At the moment it's only available from the download center. Search for:
http://www.microsoft.com/en-us/search/Results.aspx?q=kb3013455&form=DLC
The Download link will offer two updates instead of one. KB3013455 is the original patch; KB3037639 fixes the font problems that the other causes. You have to download it for each version (Vista/Server
2008/x86/x64). Thanks to the MVPs on
this thread who kept everybody posted.
NOTE: If you uninstalled KB3013455, you'll have to reinstall it, then install KB3037639; the second patch only fixes the font problem, not the original security issue.

12c Cloud Control installtion issue (on Windows 7-64 bit)

Hello,
I am trying to install 12c Cloud Control on my personal computer Windows 7 (64-bit) OS for practice purpose. The database setup has been fine and the creation of pluggable database has been successful post which we need to install the cloud control setup. There is an issue at "Step 6 of 9" where we are required to provide the database Configuration Details. The details are: Database Host Name, Port, SID, SYS password. After providing these details it shows the following error:
"There was a problem connecting to the database on the host and port specified. Check to make sure the host is up or that the database listener is running on that host."
My understanding is:
Database Host Name: it is the fully qualified name of my computer, which in my case is "SRIDHAR-PC".
I ran the following script and it confirmed the same: [quote]DBMS_OUTPUT.PUT_LINE()UTL_INADDR.GET_HOST_NAME[/quote]
Port: the default port "1521" that I have provided and which I have not configured anywhere during installation. So it is the default one.
SID: The SID of the pluggable database being asked and. In this case it is "PLUGDB"
SYS password: The password of the sys account.
How do I resolve this error?

I am sorry for having asked this question outside the forum that I am supposed to for the issue. Progressing further on the issue, yes I have tried connecting them using the credentials and it succeeds connecting the database. On digging further I found that I have been installing the 12c Cloud Control setup on 12c database with pluggable-container database architecture, unfortunately which the 12c Cloud Control EM does not support to be installed on. To install the 12c EM Cloud Control we need to install it on either of the two databases:
1) A pre-12c instance, i.e. 11g database (OR)
2) 12c database installed as a regular installation (as we install the 11g DB) which is not installed as a container-pluggable database combination (This option needs to be selected at the time of database installation).
Oracle can support monitoring the databases which contain the container-pluggable database structure along with the single instance and RAC architecture, but to install the EM Cloud Control setup, it cannot be installed on DB's which consists container-pluggable structure.

Patch 4775612 issue for Migration of 11.5.10.2 from Windows to Linux

Hi All
I am planing to migrate Oracle Application 11.5.10.2 from Windows 2003 to Oracle Enterprise Linux. I have Dual node system. My Application is on APPS NODE and my CONCURRENT MANAGER and DB are on DB node. I applied Patch *4775612* on both the nodes after shutting down the APPLICATIONS services and CONCURRENT MANAGER services on DB node, but failed. The errors are:
ERROR ON APPS NODE:
===================
Error was found when copying the DLLs from AU_TOP/bin to PROD_TOP/bin
adrelink is exiting with status 1
End of adrelink session
Date/time is Wed Jun 24 15:38:30 AST 2009
An error occurred while relinking application programs.
Continue as if it were successful [No] :
ERROR ON DB NODE:
=================
An error occurred while relinking application programs.
Continue as if it were successful [No] :
You should check the file
e:\oracle\prodappl\admin\PROD\log\4775612.log
please advise
Regards
Edited by: user457577 on Jun 24, 2009 4:21 AM

Hi,
Thanks for your reply. I followed your instruction and stopped all services on DB node as my CONCURRENT MANAGER is on DB node and applied the patch. I got success, but when i tried to apply the same patch on APPLICATIONS node i got the following error:
Error executing cp -pf d:/oracle/prodappl/au/11.5.0/bin/ar*.dll d:/oracle/prodappl/ar/11.5.0/bin
Please make sure file isn't being used.
Copy DLLs of AS to d:/oracle/prodappl/as/11.5.0/bin
Copy DLLs of BOM to d:/oracle/prodappl/bom/11.5.0/bin
Copy DLLs of DT to d:/oracle/prodappl/dt/11.5.0/bin
Copy DLLs of ENG to d:/oracle/prodappl/eng/11.5.0/bin
Copy DLLs of FA to d:/oracle/prodappl/fa/11.5.0/bin
Copy DLLs of FF to d:/oracle/prodappl/ff/11.5.0/bin
Copy DLLs of FND to d:/oracle/prodappl/fnd/11.5.0/bin
Copy DLLs of GL to d:/oracle/prodappl/gl/11.5.0/bin
Copy DLLs of INV to d:/oracle/prodappl/inv/11.5.0/bin
Copy DLLs of MRP to d:/oracle/prodappl/mrp/11.5.0/bin
Copy DLLs of GMA to d:/oracle/prodappl/gma/11.5.0/bin
Copy DLLs of PAY to d:/oracle/prodappl/pay/11.5.0/bin
Copy DLLs of PO to d:/oracle/prodappl/po/11.5.0/bin
Copy DLLs of WIP to d:/oracle/prodappl/wip/11.5.0/bin
Error was found when copying the DLLs from AU_TOP/bin to PROD_TOP/bin
adrelink is exiting with status 1
End of adrelink session
Date/time is Wed Jun 24 19:05:39 AST 2009
An error occurred while relinking application programs.
Continue as if it were successful [No] :
You should check the file
d:\oracle\prodappl\admin\PROD\log\4775612
for errors.
This time i stopped all the services rather disabled them as well and restarted the servers. I also checked adrelink.log and it also displayed the same error message.
Please advise.
Regards
Edited by: user457577 on Jun 24, 2009 6:18 AM

India localization patch tool issue

Hi,
I am applying india localization patch using india localization patch tool. Getting below error while applying patch
***Error! Cannot find executable /app/oracle/UAT/apps/tech_st/10.1.2/bin/f60gen . Exiting..
***Failed validating arguments. Exiting..
[applmgr@fortiserpuat-nd1 9035098]$ perl $JA_TOP/inpatch/indpatch.pl drvr_file=9035098.drv fnd_patchset=H appspwd=apps mode=FCD systempwd=manager
============================================================================
| INDIA LOCALISATION - PATCH APPLICATION TOOL |
============================================================================
| Copyright (c) 2005 Oracle Corporation Redwood Shores, California, USA |
| All rights reserved. |
============================================================================
Current Time [ 02-Nov-2011 16:20:19 ]
Checking the environment variables....
Successfully completed
Checking the parameters to the patch application script ....
Completed Successfully
Checking the validity of arguments...
***Error! Cannot find executable /app/oracle/UAT/apps/tech_st/10.1.2/bin/f60gen . Exiting..
***Failed validating arguments. Exiting..
Can anyone help?
Regards,
Raj

Hi;
Thanks for quick response. There is no clue of my error in that MOS id.
my erp version is apps R12.1.3 and that document is for 11i,The patch which you are trying to apply is for R11
9035098 <<
Description      BR 11I: AP CONCURRENT ENDS INTO ERROR DURING INVOICE VALIDATION
Product      India Localization
Release      Applications 11i
You can not apply this patch if you are on R12 level. What is your referance to apply this patch?
Regard
Helios

Software Distribution & Patching Design Issues - Migration of Packages SCCM 2007 to Application or Conventional Packages in SCCM 2012

Hi All
I am starting in discussion to deep root on Software Distribution & Patching model in large environments from SCCM 2007 migrating to SCCM 2012.
Below are certain assertions i am putting forward for your expert views or you may in a similar situation
1- I have migrated the packages from SCCM 2007 to SCCM 2012 as conventional methods, now i am deploying them [ not migrated the advertisements and collections ], so while deploying i am facing a peculiar situation that the deployment when created is of the
name "<<Package name>>(program)". I am not able to rename the deployment for the conventional packages. is there a way out to that??
2- Will the collection queries work the same in SCCM 2012 as was in SCCM 2007??
3- In SCCM 2012 Primary site there is default role called Site System role in that there is tab for proxy settings. I have observed that if do not check the proxy tab there and punch in proxy IP and port then after some time in the WSUS server the update
source and proxy server tab the proxy option gets unchecked and hence the sync in software update point status appears failed. Is that anyone else also has observed !!!!!
Regards Sushain KApoor

This is a duplicate of
https://social.technet.microsoft.com/Forums/en-US/2ddb8170-529b-4652-830e-fd0ade384b98/software-distribution-patching?forum=configmanagermigration
Please do not double post.
Jason | http://blog.configmgrftw.com | @jasonsandys

Patch installtion issue

Similar Messages

Maybe you are looking for