9.0.3 Patch - General issues

I'm opening up a thread so any issues with latest 9.0.3 patch can be discussed in one place.
If there are specific items with Structured FM or DITA, please use the thread in the Structured FM Forum - http://forums.adobe.com/thread/493912
This patch should update your version to FM9.0p250.

They did not fix one of the main issues, as reported here: http://forums.adobe.com/message/1927435#1927435
Several Unicode OTF/TTF fonts are still written as Times Roman to CMYK PDFs. I created a new test PDF using FM9.0.3, which you can download here:
http://www.meissner-dokuteam.de/Files/Frame/Unicode_Font_Test_fm903_cmyk_rgb.pdf
Here I'm only using roman text. I encounter the same problems with several chinese and japanese fonts, which either completely don't work, or only certain fonts out of a family don't work. Interesting: In most cases the "W5" or "Medium" versions of Asian fonts fail.
Bernd

Similar Messages

SCCM 2012 patch compliance issue

Hi All,
In my organization we are facing patch compliance issue.
in my clients all patches are installed and sent the state messages to MP.however most of the clients are having 0% compliance are showing in report.
in overall compliance report it is showing "compliance sate unknown" for most of the clients.
done the software update scan cycle, no errors in WUAhandler.log and windowsupdate.log
updatestore.log etc.files. however same location only few machines are showing 100% compliance and most of the machines are showing non-compliance (0% compliance)
please help us to resolve the issue.
Note: all machines are patches installed successfully. only report is showing "compliance state unknown"

How much time are you allowing? State messages are only submitted every 15 minutes by the client and information in the console is summarized every 1 hour (both by default); i.e., none of this is instantaneous.
Reports will reflect the up to info though. Have you directly examined WMI on a target system to verify it's patch compliance state?
Jason | http://blog.configmgrftw.com | @jasonsandys

Mac book pro - general issues i'm having

I swear since i bought my macbook pro 9 months ago there has been nothing but trouble with it. The longer i have it the more that seems to go wrong. Now i have a few issues and were wondering if these were normal or not really.
The first issue i have is with the touch pad button. Over time it feels as if it has become slightly raised to one side since i tend to use the left side of it to click down on and my right hand to maneuver the track pad. Anyway basically the right side has now become raised up and makes a horrible clicking noise whenever its used and has to be pressed down with alot of pressure.
Another issue i've had is the heat of my laptop. I know they get hot on your legs which isn't the issue. I'm more worried if it's healthy for it to be so hot. Using a widget i have i can check the temp of certain parts, some parts get up to 70 degrees celcius or more =/. On a normal computer that would mean goodbye from what i know.
Atm just using safari and nothing else but coconut battery open here's the following temperatures (Degrees Celcius):
HD: 42
CPU A: 57
Airport Card: 55
Enclosure base: 36
GPU Diode: 65
GPU Heatsink: 56
Heat Sink A: 57
Heat sink B: 45
Now I'm a big multi tasker, and when i have photoshop, firefox, safari (I us them both for different tasks) and illustartor open as well as MSN and skype these can get in excess of 60 degrees C. When playing games it gets even worse, often 70+ degrees C. Now these temperatures are worrying to me. Should i be worried?
Now i also have the issue of my macbook pro being horribly sluggish. My hard drive has 60GB free. Now what possibly may be the problem is I have windows XP dual booted as well as I often use a virtual machine for MIRC (I have yet to find a decent alternate mac based client i'm happy with). Anyway what can i do to increase my performance, because i'm not very happy right now with how sluggish it gets.
Another problem is the damned chargers. I am currently on my third one. I'm worried that when my warrenty goes im going to have to keep replacing them =/. My first one basically overheated, sparked and died. Wouldnt work no more. Second one the cord had exposed wires at the base of the charger. Now has anyone else had issues with this?
Ok, and that's it for now.

What gets to 70ºC, smash_you2 ? There is nothing abnormal about CPU temps around 70ºC when the computer is working moderately hard. Core 2 Duo temps can get much higher than this. Many Dell users, for example were reporting temps closer to 100ºC for their C2D CPU's on their discussion boards recently. 70ºC is typical of working fairly hard, but far from extreme.
One thing I would be worried about from your comments, though, is the suggestion of deformation in the track pad/ button area. THis can sometimes result from a defective battery becoming deformed. THis, in turn can result in greater heat from the charging system and the battery itself. I'd be more stressed about this possibility than the temperatures that your widget is quoting. Check your battery condition using system profiler.
Running in "dual boot" mode will, of course, always diminish performance generally, as your computer won't have the same CPU and memory resources available for the primary OS that it would otherwise possess.
Cheers
Rod

General issues during Installation

Hi Experts,
What are issues generally we are facing during installation of data sources and loading of data in to DSO or Cube.(with real time example).
and how that can be solved?
Regards
Tapashi saha

Hi
Discussed so many times.
While installing the BC DS based on the Data flow the error occurs, Normally the Shortdump if you select much Object at Grouping with Dataflow before after based on the time lines.
The Connectivity / RFC issues between the systems
The Data Init fails due to data inconsistencies.
Hope it helps and clear

Leopard general issues (slow boot-Blue screen of tolerance)?

I upgraded it to leopard 10.5.2 a week ago. I thought my old system with tiger (10.4.11) used to boot faster and work faster and I thought I was being cynical. I just checked with my buddy's computer which is completely identical to mine (2GHz intel Core 2 Duo, 2gb ram, 120gb hard disk macbook). She still has tiger 10.4.10. It boots drastically faster. As soon as dark grey apple disappears tiger shows a progress bar showing the log on process and it logs on in less than 5 secs. Overall boot up was around 20secs. First of all I don't know why leopard doesn't have that progress bar. Secondly leopard hangs on a blue screen during startup for another 20 seconds which makes the overall time 40-50 secs.
I deleted all cache everything and unused files while installing. I never got a blue screen of death either. It is almost a clean install. People might suggest erase/install or archive/install but I checked other forums people suffering with this issue has not been successful to eradicate it this way.
I checked my logs. they are pretty clean except some launchctl convert stuff.
I am pretty convinced it is leopard issue.
I have two questions:
1) Is Apple aware of this issue (blue screen on startup for 20 sec) and would be address it in next update? or is it not fixable?
2) Can I somehow have that auto-logon progress bar back?
3) Sidebar fonts are very small. Tiger sidebar was much easier to use. Is their a way to increase font size.
In general I am quite disappointed with Leopard. It is much slower especially with respect to finder windows. I wish I could downgrade to Tiger but it is to much hassle..taking backup..reinstalling all applications. I kinda like quicklook too. I'll miss it if I downgrade.
I would like to know whether apple addresses such issues in upgrades? I am patient.

I have two questions:
Actually I count three questions.
1) Is Apple aware of this issue (blue screen on startup for 20 sec) and would be address it in next update? or is it not fixable?
Not a problem with OS X. More likely a problem with your installation or setup. I have 5 Macs running Leopard and have no similar problem nor ever have. Although boot times differ with hardware, startupitems, login items, etc. they are not much different. My Mac Pro takes half the time as my laptops typically.
2) Can I somehow have that auto-logon progress bar back?
No. It's no longer included in OS X.
3) Sidebar fonts are very small. Tiger sidebar was much easier to use. Is their a way to increase font size.
Not aware of any control over this in Leopard, but if there is someone else may let you know.
If you want to improve performance on your computer then try some maintenance:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.6.1 is Leopard compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
8. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.

OSFM & Discrete Manufacturing Patch G Issues

Hello Community!!
Would like to know whether anyone had issue when applying discrete mfg patch G (DM_PF_G : Patch 2133107) which we applied to get upto current version for OSFM.
I faced these specific problems and would like to know if anyone faced this issue.
1) While applying the Patch, adadmin failed in between due to following error:
-------------- E R R O R L O G I N F O -----------------
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFRESGEN on worker 1.
FAILED: file WFRESGEN on worker 2.
FAILED: file WFRESGEN on worker 3.
FAILED: file WFRESGEN on worker 4.
FAILED: file WFRESGEN on worker 5.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Start time for file is: Wed Feb 06 2002 18:45:42
/oradev/test/testappl/fnd/11.5.0/bin/WFRESGEN APPS/APPS 0 Y DATABASE @FND:resource/wfver.msg
Logfilename : /oradev/test/testappl/admin/TEST/log/l1117586.req
Report filename : /oradev/test/testappl/admin/TEST/out/o1117586.out
wferr:
- WFRESGEN_FAILED
- WFUPI_FAIL MESSAGE=ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.WF_CORE" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
STATEMENT=BEGIN WF_CORE.SESSION_LEVEL:=0; WF_CORE.UPLOAD_MODE:='FORCE'; END;
AD Worker error:
The above program failed with error code 1.
See the AD Worker log file and/or the program log file for details.
work02.log
Start time for file is: Wed Feb 06 2002 18:45:42
------------------ E N D O F E R R O R L O G I N F O -----
I had TAR with Metalink and we did go back and forth and could not resolve this issue till i found that the patch zip file p2133107_11i_SOLARIS.zip had the wfcoreb.sql and wfcores.sql script files for package spec and body which caused the problem.
Analyzing both spec and body, i found that the body had 4 parameters
procedure Get_Error(err_name out varchar2,
err_message out varchar2,
err_stack out varchar2,
maxErrStackLength in number default 4000);
whereas the spec had only 3 parameters.
procedure Get_Error(err_name out varchar2,
err_message out varchar2,
err_stack out varchar2)
Discrepancy between spec and body was the cause of the worker to fail. By adding the missing parameter i was finally able to continue with the install.
I even checked the latest update to this patch at Metalink and still find that the above error is not fixed.
ID:1235184 Patchset::2133107 README
Patch 11i.DMF_PF.G
Product:Discrete Manufacturing
Platform:Sun SPARC Solaris
Language:American English
Translations Required
Version:11i
Last updated:01-MAR-2002
Size:137M (144628287 bytes
Would like to know if anyone else had a similar issue while applying this patch.
Thanks
Gaja

Hello Community!!
Would like to know whether anyone had issue when applying discrete mfg patch G (DM_PF_G : Patch 2133107) which we applied to get upto current version for OSFM.
I faced these specific problems and would like to know if anyone faced this issue.
1) While applying the Patch, adadmin failed in between due to following error:
-------------- E R R O R L O G I N F O -----------------
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFRESGEN on worker 1.
FAILED: file WFRESGEN on worker 2.
FAILED: file WFRESGEN on worker 3.
FAILED: file WFRESGEN on worker 4.
FAILED: file WFRESGEN on worker 5.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Start time for file is: Wed Feb 06 2002 18:45:42
/oradev/test/testappl/fnd/11.5.0/bin/WFRESGEN APPS/APPS 0 Y DATABASE @FND:resource/wfver.msg
Logfilename : /oradev/test/testappl/admin/TEST/log/l1117586.req
Report filename : /oradev/test/testappl/admin/TEST/out/o1117586.out
wferr:
- WFRESGEN_FAILED
- WFUPI_FAIL MESSAGE=ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.WF_CORE" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
STATEMENT=BEGIN WF_CORE.SESSION_LEVEL:=0; WF_CORE.UPLOAD_MODE:='FORCE'; END;
AD Worker error:
The above program failed with error code 1.
See the AD Worker log file and/or the program log file for details.
work02.log
Start time for file is: Wed Feb 06 2002 18:45:42
------------------ E N D O F E R R O R L O G I N F O -----
I had TAR with Metalink and we did go back and forth and could not resolve this issue till i found that the patch zip file p2133107_11i_SOLARIS.zip had the wfcoreb.sql and wfcores.sql script files for package spec and body which caused the problem.
Analyzing both spec and body, i found that the body had 4 parameters
procedure Get_Error(err_name out varchar2,
err_message out varchar2,
err_stack out varchar2,
maxErrStackLength in number default 4000);
whereas the spec had only 3 parameters.
procedure Get_Error(err_name out varchar2,
err_message out varchar2,
err_stack out varchar2)
Discrepancy between spec and body was the cause of the worker to fail. By adding the missing parameter i was finally able to continue with the install.
I even checked the latest update to this patch at Metalink and still find that the above error is not fixed.
ID:1235184 Patchset::2133107 README
Patch 11i.DMF_PF.G
Product:Discrete Manufacturing
Platform:Sun SPARC Solaris
Language:American English
Translations Required
Version:11i
Last updated:01-MAR-2002
Size:137M (144628287 bytes
Would like to know if anyone else had a similar issue while applying this patch.
Thanks
Gaja

10.2.0.2 Patch Upgrade issue

hi,
SAP was installed on 10.2.0.1 (SuSe Linux Ent 10 ) . now i am applying patch upgrade to 10.2.0.2. when i am doing patch the below problem was occured,
"Unable to create new central inventory at location /oracle/orainventory. A non empty inventory already exists at this location. Please select another location or clean the inventory at /oracle/orainventory."
please help me on this issue
Regards
Ramesh

Hai,
Please check the oraInst.loc file has the correct entry or not.
File oraInst.loc should have the entries similar to the below:
inventory_loc=/oracle/SID/oraInventory
inst_group=dba
Check the permissions of this file as well, atleast the file should have read access to others.
Also check the permissions of /oracle/SID/oraInventory, it should be owned by ora<sid> user and group dba.
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Feb 23, 2009 12:05 PM

ACS SE 4.1.1.23 patch 5 issue with users

HI There, I am facing very weired issue with ACS SE 4.1.1.23 patch 5. I am trying to add users in ACS it is added successfully but I can not see these users when I click list all users.
But I can see users are increasing in groups when I add users..but when I do list all users it say there are no users defined. and I tried to login with newly created users from devices ....I am able to login with those new users.....
also when I go to that particular group in which I added new users....and say list users in group...I get message from ACS saying that "can not read users from group" ....
what could be issue any one has any idea....customer complained that he was unable to login to devices...with the users created on ACS...when I saw there was no users in database....then I added 2-3 users by looking at old passed and failed authentication... but I dont know how users got deleted automatically...even I tried to see appliance audit logs...could not see any thing which indicates someone deleted users...
please help me to solve this issue..
Thanks

Issue resolved. The CRL that was being parsed from the cert was one level higher than the CRL that needed to be checked. The User CRL was ppointing to the Intermediate CA's CRL. I had to manually change the URL from this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20Intermediate%20CA%201.crl
to this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20User%20CA%201.crl
Mark

Patch Upgradation issues (10.2.0.1 to 10.2.0.2)

Hi All,
I have a 5TB production database, plan to upgrade to 10.2.0.2 from 10.2.0.1 .
i want to know what are the things will happen at the time of upgradation / after upgradation like below
1) Any impact on User defined tables / objects?
2) Does it perform any statistics collection like gather stats job?
3) Does it perform or required any object compilation?
4) How long this will take to complete the upgradation task??
Please help me to perform the upgradation task.
Thanks,
Nagaraj

A point upgrade in the fourth place is the collection of bug fixes for your platform. As such, don't expect there to be any functional changes, except as it relates to things that didn't work will begin working.
>
1) Any impact on User defined tables / objects?I would not expect any changes.
2) Does it perform any statistics collection like
gather stats job?I would not expect this unless there was a bug related to it, and if stats weren't collected, things would break.
3) Does it perform or required any object
compilation?There is a good chance of this if there are any changes to system database structures.
4) How long this will take to complete the
upgradation task??
Of course you know the answer is "it depends".
When you download the patch, there will be a README that will provide more information. In particular, you can get a feel for the impact on the database by looking at the requirement to run an upgrade script on your database. You can look at that script and see exactly what it is doing and have a better feel for what the impact might be.
Note that this answer applies to fourth digit point upgrades and general.
Chris

Patched Deployments issue: "waiting for another installation to complete"

I have some percent of computers which runs into above state in monthly patch deployments. I could minimal information from execmgmr, udpatesdeployment.log,
CliSpy and Client Center etc tools but that doesn’t offer much help to nail down the issue completely. Have any of you dealt to resolve such issue successfully ? Is there any efficient way to handle this ?
It seems I have
DeploymentA, waiting for the completion of DeploymentB, which in turn waiting for the completion of
DeploymentC. Is there any better approach I could take to nail down and resolve the issue. One of my finding is, KB articles installs (SCCM R3, SCCM Asset Intelligence) causes these issue as they restart (upgrade sort of execution) the
agent during the execution, I need to confirm these
Vasu

Hi Vasu,
This issue can be caused by a deployment was previously deployed and was now deleted. This was because the clients finished installation
and wanted to notify the Server that it is done, but since the deployment was deleted, it couldn’t Notify its progress to the site server and the CCM_DeploymentTaskEx1 got stuck.
Please use the following scripts to delete the instance to test this issue.
strService = "CcmExec"
strComputer = "."
Set objWMIService = GetObject("winmgmts:" & "{impersonationLevel=impersonate}!\\" & strComputer & "\root\CCM\SoftwareUpdates\DeploymentAgent")
Set colWMISettings = objWMIService.ExecQuery("Select * from CCM_DeploymentTaskEx1")
For Each objWMISetting in colWMISettings
objWMISetting.AssignmentId = ""
objWMISetting.JobId = "{00000000-0000-0000-0000-000000000000}"
objWMISetting.Put_
Next
'Stop service
Set objWMI = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set objService = objWMI.Get("Win32_Service.Name='" & strService & "'")
objService.StopService()
WScript.Sleep 10000 ' Pause to allow service to stop
'Start service
Set objService = objWMI.Get("Win32_Service.Name='" & strService & "'")
objService.StartService()
WScript.Sleep 10000 ' Pause to allow service to start
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.

Some General Issue Questions

Rather than search thru a lot of messages, thought I'd post a
synopsis of all my recent issues and see if anyone has any
solutions/suggestions...
(1) When I publish, some of my "click Next" hot spots (go to
next slide) do not render in the published Flash move files -
however, they truly exist and are properly configured in the cp
file - and seem to work fine in Preview (movie) mode.
(2) The application I'm trying to "captivate" is a web app,
built using a combination of frames, javascript, and dhtml
components. Most of the mouse clicks I make while recording are
useless, as they are usually AHEAD OF what's actually happening
on-screen, although what I'm capturing APPEARS to be accurate and
where I am on the screen. I initially tried do-overs, and got so
frustrated (changing how quickly I moved the mouse, struck keys,
etc.), that I just turned off the Full Motion recording options,
slowed the frames per second - all of these things, several times,
trying different combindations - nothing was successful.
Any suggestions for settings? Basically, I'm capturing a
sequence of screens and putting in all the information into text
boxes and manually inserting click boxes to create a "demo" - in my
opinion, totally defeating the intent and purpose of using
Captivate to begin with.
At this point, I've spent so much time experimenting and
trying to get the "automated" features to work, I've basically
turned them all off and am doing everything manually, just like
PowerPoint.
So, why is Captivate so much better than PowerPoint? Other
than the Flash rendering of the files, I don't see it...
Anybody experience any of these things?
Thanks and regards,
cyn

Hello thiah,
It sounds like you are very frustrated....
1 - I have never had this issue with Next buttons. Perhaps
you can provide more details on the settings on your next button?
2 - I would definitely remove the full motion recording. I
use the recording feature rarely in general, as I need to modify
the screens to change proprietary data. I usually take screen
captures, modify the screen in Photoshop, then insert the bmp image
as an image slide.
But, I find that the record feature it can be very handy and
a quick easy way to create a demo. Captivate is def better than PPT
for many reasons - the timeline, the ability to insert a mouse
movement, ability to publish as Flash, the ability to customize the
size of the movie or demonstration, ability to have click boxes,
buttons, text entries, etc.
As far as suggestion for settings when recording - on the
Recording Options tab, I usually have Enable Auto Recording
selected and I use the demonstration mode, select to record
keystrokes and hear tap sounds, hear camera sounds during
recording, and move new windows inside recording area.
A good tip to remember, if you think that Captivate didn't
capture a screen while you are recording, you can always hit
<Print Scrn> to capture the screen. If it becomes a
duplicate, you can always delete the slide.
Hope this helps. I love Captivate.... it has it's quirks -
but nothing that can't be worked with.
Lynn

Remote patch management issues - AD required??

We are using ZCM10 and we're having problems with deploying patches remotely. That is running PM after hours by waking a PC, logging, deploying the patch and closing down. Something I was given to believe that ZCM would handle.
I'm being told by colleagues the reason that its not working is that we don't have AD and therefore MS patches won't work. We only have eDirectory for logins/GroupWise/ authentication etc.
So is it really necessary to have a domain running so that ZCM can wake up PC's login, deploy the patches, remediate and move on?
Many thanks

AD is by no means required for any MS Patches using ZPM or even not
using ZPM. Best to post details on the failures and ZCM version so your
issue can troubleshot.
Also try to narrow down your issue.
Is the Issue the WOL? Logging On? The Patches Applying ever, even when
the PC is manually powered on and logged into?
On 1/6/2011 12:36 PM, turners wrote:
>
> We are using ZCM10 and we're having problems with deploying patches
> remotely. That is running PM after hours by waking a PC, logging,
> deploying the patch and closing down. Something I was given to believe
> that ZCM would handle.
>
> I'm being told by colleagues the reason that its not working is that we
> don't have AD and therefore MS patches won't work. We only have
> eDirectory for logins/GroupWise/ authentication etc.
>
> So is it really necessary to have a domain running so that ZCM can wake
> up PC's login, deploy the patches, remediate and move on?
> Many thanks
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Patch installation issue on ACS 5.1

Hi,
I have one ACS server (5.1) in the Dev environment. I am trying to install the patch 5-1-0-44-6 before upgrading to 5.3. When I try to install the patch, the server doesn't do anything, after few hours, I dodn't see any changes on the server. Here is my version info:
Cisco ACS VERSION INFORMATION
Version : 5.1.0.44
Internal Build ID : B.2347.EVAL
If anybody experinced the same problem or know how to solve this issue, please share.
Thanks!

I have managed to bind the certificate now. I went to check the link given to me by the CA and found two certificates, one in PKCS#7 and X509 format. I tried the X509 format and the ACS successfully binded it.
It works but I want to know how it all works.PKCS#7 includes the Intermediate CA while X509 doesn't. The X509 certificate comes with a message stating that Intermediate CA needs to be installed seperately. I have found it and can install it, but what is it used for? I also found the CA certificate. So there is three certificate, CA, Intermediate CA and X509. How does it all come together, or does anyone have a link on a good guide on how it works?
I am trying to configure wireless authentication using PEAP-MSCHAPv2 using Cisco WLC, ACS as RADIUS server and Windows AD as the database. Is there anything I need to know about certificates in this deployment?

MS15-10 kb3013455 Feb 15 Patching Font issues

Please let us know if any one has faced issues on Terminal servers for Font issues after installing MS15-10 - KB3013455 Feb15 Patch
Resolution and font issues, is there a fix for this
We had issues after installing this patch in our environment, had to uninstall
OS Details
Microsoft® Windows Server® 2008 Enterprise without Hyper-V
6.0.6002 Service Pack 2 Build 6002
32 bit

There's a patch now: KB3037639. At the moment it's only available from the download center. Search for:
http://www.microsoft.com/en-us/search/Results.aspx?q=kb3013455&form=DLC
The Download link will offer two updates instead of one. KB3013455 is the original patch; KB3037639 fixes the font problems that the other causes. You have to download it for each version (Vista/Server
2008/x86/x64). Thanks to the MVPs on
this thread who kept everybody posted.
NOTE: If you uninstalled KB3013455, you'll have to reinstall it, then install KB3037639; the second patch only fixes the font problem, not the original security issue.

Patch installtion issue

i have downlaod a lastest critical patch of oracle for 11g .7 version now i have been one problem during installation i have read redme when they follwing steps
Follow these steps:
Cleanly shut down all processes running from the ORACLE_HOME.
Set the ORACLE_HOME environment variable to the correct Oracle home that needs to be patched.
set ORACLE_HOME=<Oracle Home Path> Go to the directory where you downloaded the patch:
cd 8343061 Ensure that the directory containing the OPatch script appears in your PATH setting. Enter the following command to run OPatch:
opatch apply Inspect the opatch<timestamp>.log file generated in %ORACLE_HOME%\cfgtoollogs\opatch for any errors.
but my problem there no such directory opatch even in oracle home. i have a bat file will i directly run that file. but i came to know that patch is successfully install or not plz help in this regard

i have extract opatch in oracle home when i issue opatch version i rasied follwoing error
D:\app\remote\product\11.1.0\db_1\OPatch>OPATCH VERSION
Invoking OPatch 11.1.0.6.6
Oracle Interim Patch Installer version 11.1.0.6.6
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Syntax Error... Unrecognized Command or Option: 1st argument must be one of the
following:
apply
napply
rollback
nrollback
lsinventory
lsinv
query
util
prereq
version
-help
-h
Please use the option 'opatch -help' to get correct syntax
OPatch failed with error code = 14
D:\app\remote\product\11.1.0\db_1\OPatch>

9.0.3 Patch - General issues

Similar Messages

Maybe you are looking for