PATCH runs autoconfig or not?

Hi,
How to identify wether a patch(application patch) is running autoconfig during the patch application?
Regards
DBA.

Hi,
Most recent application patches run AutoConfig as part of the patching process. You can find out whether the patch will run AutoConfig by reviewing the patch README file, or by applying the patch in TEST mode using "adpatch apply=n". This will not do any changes in you application/database, it will just generate a log file showing all the actions it will perform when applying it normally.
Regards,
Hussein

Similar Messages

Copied db tier filesystem, but did not run autoconfig

Hi
I had to copy the APPL_TOP this week. The application is up and running. I was told to NOT bother running autoconfig. Guess what?
Although the APPL_TOP copied fine, the .env files (the APPSORA, the custom file) and the .profile did NOT copy.
I know that now I should run autoconfig to create the APPSORA. Is this also true of the custom and profile? Or are these done manually?
thanks a lot.
DA
AIX 5.2
EBS 11.5.10
Oracle 9i

Its strange, since I did copy the APPL_TOP, and no, the .profile and the .env files are not there. Will copy them now.For the env files, you will not find it there since you copied the whole APPL_TOP, so this is an expected behavior.
For the OS users profiles, it should be there and you should not lose those files.
The reason I asked is that at the top of our APPSORA.env it states that "this file is generated by Autoconfig" If your source application node is AutoConfig enabled then this is also an expected behavior. Verify the environment variables in this file; it should be pointing to your source instacne and not the target node.

Impact of running autoconfig on SSL setup

Hi,
I have SSL setup in production and need to apply the latest autoconfig patch there. Can you please advice if running autoconfig will impact the current SSL setup in any way?
My EBS version is 11.5.10.2 with 10.2.0.4 database. I have a multinode configuration with Web and forms server on one node and Database, reports, concurrent and admin server on the other.

user503988 wrote:
Hi,
I have SSL setup in production and need to apply the latest autoconfig patch there. Can you please advice if running autoconfig will impact the current SSL setup in any way?
My EBS version is 11.5.10.2 with 10.2.0.4 database. I have a multinode configuration with Web and forms server on one node and Database, reports, concurrent and admin server on the other.AutoConfig should not impact your SSL setup, as long as you followed these MOS docs to implement SSL and have all the context variables set properly.
11i: A Guide to Understanding and Implementing SSL for Oracle Applications [ID 123718.1]
11i: Troubleshooting SSL with Oracle Applications [ID 300969.1]
Thanks,
Hussein

Running autoconfig on windows

Hi,
When ever i run autoconfig on windows machines(remotely). i see that it hangs at orainf.cmd.
Executing script in Instantiatefile
8.0.6 HOME\orainf.cmd
Why does this happen. Is it different way to run autoconfig on windows machines.
I am applying patch 5478710. At the end the patch is ruunning autoconfig and it is hanged here
Regards
Taher

Hi,
If you see my above post ,i said dont use remote desktop connection,mstsc will give you remote desktop connection....which is good for brwosing and other activitieson the system but not good fo oracle apps admin tasks.
Otherwise use a VNC server or symantec pc anywere which will give u a direct GUI session of server to you.
Regards
Edited by: hungry_dba on Feb 8, 2010 10:38 PM

11i Patch Wizard - MOS credentials not working

Linux x86
DB 10.0.2.4
11.5.10.2
AD.I.6
ATG.RUP-6
I am trying to use the Patch Wizard. I just applied patches 10405353 and 10123716 and still cannot get the MOS credentials to work -- receiving this error: "Unable to connect to Metalink. Please enter a valid Metalink userid and password. Please also check if the Web Proxy Setup information is correct."
I am pretty sure that we do not have a proxy server and I have entered the credentials correctly.
I also used the SYSADMIN user.
The only other potential issue is that I have both "s_proxyhost" and "s_proxyport" defined in the CONTEXT file.
In MOS note 297689.1 is says that if we are not using a proxy then they should be null.
Does that mean I need to set them to null using OAM and then run autoconfig?
Thanks, Chaz

Great, making these "s_proxy" values null then requires controlled patch 7582470 what has a pre-req of patch 11i.FIN_PF.G (400+ MB) which we don't have.
I can't believe that I have to move to 11i.FIN_PF.G to use the Patch Wizard.
I have a test R12 instance where this worked just fine.
I'll open an SR and see if there are any other options.
Thanks, Chaz

Error while running autoconfig in DBtier

Hi ,
While running a autoconfig on DBTier we got the following errror :
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u02/11i/CES/cesdb/9.2.0/appsutil/install/CES_ceserp
afdbprf.sh INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u02/11i/CES/cesdb/9.2.0/appsutil/install/CES_ceserp
adcrobj.sh INSTE8_APPLY 1
AutoConfig is exiting with status 2
please advise what to do
Thanks,
Vinay

Executing script in InstantiateFile:
/u02/11i/CES/cesdb/9.2.0/appsutil/install/CES_ceserp/adcrobj.sh
script returned:
adcrobj.sh started at Thu Apr 1 01:50:15 IST 2010
Parameters passed are : -nopromptmsg
The environment settings are as follows ...
ORACLE_HOME : /u02/11i/CES/cesdb/9.2.0
ORACLE_SID : CES
TWO_TASK :
PATH : /u02/11i/CES/cesdb/9.2.0/Apache/perl/bin:/u02/11i/CES/cesdb/9.2.0/bin:/usr/bin:/usr/sbin:/u02/11i/CES/cesdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/11i/CES/cesdb/9.2.0/Apache/perl/bin:/u02/11i/CES/cesdb/9.2.0/OPatch:/u02/11i/CES/cesdb/9.2.0/Apache/perl/bin:/u02/11i/CES/cesdb/9.2.0/bin:/usr/bin:/usr/sbin:/u02/11i/CES/cesdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:.:.
LD_LIBRARY_PATH : /u02/11i/CES/cesdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/11i/CES/cesdb/9.2.0/ctx/lib
SQLPLUS Executable : /u02/11i/CES/cesdb/9.2.0/bin/sqlplus
SQL*Plus: Release 9.2.0.8.0 - Production on Thu Apr 1 01:50:15 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
adcrobj.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.

Error while running autoconfig on apps tier

Dears ,
apps 11.5.10.2
DB 9.2.0.8
OS solaris sparc 10 64bit
while running autoconfig on apps tier autoconfig failed with CLNADMPRF.SH and okladmprf.sh and autoconfig take along time to complete
ERROR:
ORA-12154: TNS:could not resolve service name
1- how can i solve these error ?
2- should i skip these errors and start upgrade apps from 11.5.10.2 to 12.1.1 and DB from 9.2.0.8 to 11.2.0.1 ?
Regards ,,,

while running autoconfig on apps tier autoconfig failed with CLNADMPRF.SH and okladmprf.sh and autoconfig take along time to complete
ERROR:
ORA-12154: TNS:could not resolve service name
1- how can i solve these error ?Please see (CLNADMPRF.SH FAIL WITH ORA-12154 WHILE RUNNING AUTOCONFIG [ID 753535.1]).
2- should i skip these errors and start upgrade apps from 11.5.10.2 to 12.1.1 and DB from 9.2.0.8 to 11.2.0.1 ?No, please find the error first then proceed with the upgrade.
Thanks,
Hussein

Issue in running autoconfig in appsTier while cloning

Hi my dear Friends
I am working on a clone. I completed post clone in dbTier. Now my DB is up and running. Then I ran adcfgclone.pl in appsTier. It completed with some errors in autoconfig.
The content of log file:
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: E:\TEST\testcomn\admin\install\TEST_fintest
adgenjky.cmd INSTE8_SETUP 128
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: E:\TEST\testcomn\admin\install\TEST_fintest
adsvalsn.cmd INSTE8_APPLY -1
AutoConfig is exiting with status 2
I modified the environmental variable DISCO_JRE to point to the jre in my COMMON_TOP.
After this wen i ran autoconfig it stopped abruptly. In log i found the below:
Starting AutoConfig at Sun Mar 8 09:33:47 2009
Using adconfig.pl version 115.74
Classpath :
Version Conflicts among development maintained and customized templates encountered; aborting AutoConfig run.
The logfile for this session is located at: D:\TEST\testappl\admin\TEST_fintest\log\03080933\adconfig.log
Then i rolled back my environmental variable DISCO_JRE to the old value but no result.
Please can any one help me get rid of this problem?
Regards
Ridhi Sundar

I found this.
STEPS
The issue can be reproduced at will with the following steps:
1. Following Note: 238276.1 - Migrating to Linux with Oracle Applications Release 11i
2. Follow Section 2: Migrate Platforms with Oracle Applications 11i
3. Follow step 7. Run AutoConfig setup phase on the target system
4. Run command line:
./adconfig.sh run=INSTE8_SETUP contextfile=/u001/.../contextFILE.xml
Changes
The OS environment variable JAVA_HOME is set.
Cause
$JAVA_HOME misdirects adconfig to the wrong jre.
Solution
Simply issue the following command:
unset JAVA_HOME
Then you can run adconfig.sh without the above error.
Hope helps
Regards.

Error : Patch 9.4.2 not installed. when trying to install AcrobatPatchApplication.exe

All is in the titles.
I'm deploying Acrobat Reader and Pro on several thousand of machines, usually without big troubles.
last month I deployed the 9.4.2 update and everything went fine until we discovered the printing problem.
This month I'm trying to deploy the patch, but it seems to not work as expected.
When i run it on few machines with Adobe Acrobat 9.4.2 and Adobe reader 9.4.2 it returns to me the following message in the log file:
03/09/11 11:14:21   INFO              =~=~=~=~=~=~ Start : Acrobat Patching Application.. =~=~=~=~=~=~=~=~=~
03/09/11 11:14:21   INFO              Silent Mode : 1
03/09/11 11:14:21   INFO              Found product : {AC76BA86-1033-0000-7760-000000000004}, installed on the machine.
03/09/11 11:14:21   ERROR             Error : Patch 9.4.2 not installed. Acrobat 9.4.2 patch should be applied before running this executable.
03/09/11 11:14:21   INFO              =~=~=~=~=~=~ Logging finished... =~=~=~=~=~=~=~=~=~
For info : {AC76BA86-1033-0000-7760-000000000004} is the code for Adobe Acrobat Pro 9.4.2 in the registry key.
What's wrong??

Installation howto you can find on http://www.puschitz.com
Try use "Search" function before you create new topic. This one was discussed many times.

Recommended patch 120445-01 will not install with Sol. 9 (09/2005)

Patch 120445-01 will not apply to a Solaris 9 (09/2005) setup. The hardware is an Ultra-80. Although it is recommended, it fails with the "patchadd" message:
Checking installed patches...
One or more patch packages included in 120445-01 are not installed on this system.
The host was installed from scratch and the "smpatch" was run until it had no more patches to apply except this one.
For us, this patch is only an annoyance. When I cursorily read the description, I doubt that these features exists on this hardware.

I had to install the packages:
TSBWvplr.u
TSBWvplu.u
from the DVD media. I could not find these packages from the CD media that I used. I had to use another machine to extract the packages.
I saw another post where it mentioned that patch 120445-01 would not apply. I suspect that the package install of it already has this patch.

Solaris 10 svc:/milestone/single-user timeout during patch run

Hello all,
when doing a patch run (Oct 07 baseline) on a Solaris 10 client the machine rebooted into single user as per normal. However the time for the patches to be applied in single user took so long the single-user milestone timed out and the machine went into maintenance mode. The machine did continue to complete the rest of the patch run. Anyone else seen this and have a work around? I don't really want to blanket increase the service timeout. Selected console output below..
( 27 / 37 ) Installing '127111-02' - succeeded.
( 28 / 37 ) Performing 'Mandatory reboot with reconfigure and action as single-user'
( 29 / 37 ) Installing '127753-02' Nov 22 10:30:08 svc.startd[7]: svc:/milestone/single-user:default: Method or service exit timed out. Killing contract 31.Nov 22 10:30:08 svc.startd[7]: milestone/single-user:default failed: transitioned to maintenance (see 'svcs -xv' for details)
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass): Nov 22 10:30:20 svc.startd[7]: network/ntp:default failed repeatedly: transitioned to maintenance (see 'svcs -xv' for details)
Nov 22 10:30:20 svc.startd[7]: failed to abandon contract 45: Permission denied
- succeeded.
( 30 / 37 ) Installing '119757-09' - succeeded.
( 31 / 37 ) Installing '127737-01' - succeeded.
( 32 / 37 ) Installing '127718-01' - succeeded.
( 33 / 37 ) Installing '125184-04' - succeeded.
( 34 / 37 ) Installing '124444-01' - succeeded.
( 35 / 37 ) Installing 'postpatch' - succeeded.
( 36 / 37 ) Performing 'Reboot'
( 37 / 37 ) Performing 'Reboot with reconfigure'

Hi, yes I see it all the time and it's normal and in fact documented in the release notes:
http://docs.sun.com/app/docs/doc/820-0428/6nc5u3kou?l=en&a=view#smftimeout
One workaround is to ignore it and not do anything! In fact I think that is the preferred workaround.
Another question, just out of curiosity, what does your "postpatch" Post action script do? Just wondering if it might be something useful for other sites too?

SAP XI HR patch XI7_0_SAP_HR_6.00_83_00.tpz not getting imported

SAP XI HR patch XI7_0_SAP_HR_6.00_83_00.tpz not getting imported
Hi Team,
We are trying to import this patch to SAP XI in IR, but this is
not getting imported. Everytime it is getting errored out or running for more
than 7 hours and still not completing.
This patch is per below note:
1969094 - PY-GB: Earlier Year Update Report Changes 2013/2014The .TPZ file was downloaded from below from SAP Market place.
The .TPZ file was downloaded from below from SAP Market place.
GO to SAP Service
Marketplace:
http://service.sap.com/sp-stacks
Then follow the path given below
-> Support Packages and Patches
=> A - Z Index
o Click on index "E"
-> Click on "ESR Content (XI Content)"
XI content for SAP HR are available for 600 and 604 releases seperately.
FOR SAP HR 600
=> XI CONTENT HR
o XI CONTENT HR 600
=> #Database independent
o DOWNLOAD: SP83 XI Content SAP HR 600To track the progress of the import we
have also enabled the trace. Below is the trace log:
To track the progress of the import we have also enabled the
trace. Below is the trace log:
#135 13:07:29 [AWT-EventQueue-0] DEBUG
com.sap.aii.ib.clsif.login.LoginService: Found cached remote interface
LoginServiceBean
Feb 28, 2014 1:07:30 PM [1393592850003]:Info : Thread[AWT-EventQueue-0,6,m...
com.sap.engine.services.rmi_p4: com.sap.engine.services.rmi_p4.Call.sendRequest
MSG: com.sap.aii.ib.sbeans.login.LoginServiceRemote_Stub@d61efd:
Calling remote method: getSystemMessages(com.sap.guid.IGUID) call id: 49
connection: com.sap.engine.services.rmi_p4.Connection@1150389
: None:192.168.29.48:50004 [null] server id: 8005050
Feb 28, 2014 1:07:30 PM [1393592850019]:Path : Thread[AWT-EventQueue-0,6,m...
com.sap.engine.services.rmi_p4.Connection.reply: com.sap.engine.services.rmi_p4.Connection@1150389
: None:192.168.29.48:50004 [null]: sending message with size 410 bytes to
server 8005050
Feb 28, 2014 1:07:30 PM [1393592850019]:Path : Thread[Thread-23,6,main]
com.sap.engine.services.rmi_p4: com.sap.engine.services.rmi_p4.Parser.newRequest
MSG: Received message type: REPLY call id: 49 size:197 received from: com.sap.engine.services.rmi_p4.Connection@1150389
: None:192.168.29.48:50004 [null]
Please help on this urgently to find out the root cause and import the patch successfully.
Many thanks.
Binod Kumar

Hi Binod,
you can configure the java heap size in PI exchange profile. change the max heap size (to 1024 or check with basis)
com.sap.aii.ib.client.jnlp.j2se.maxheapsize = 1024m
refer the below wiki question 19
QA for PI - One stop for all (Part - 1) - Netweaver Technology - SCN Wiki
regards,
Harish

Unable to run AutoConfig

Hi group,
Suddenly we got below error messages inside of the application:
Oracle error 100: ORA-01403: no data found has been detected in FND_SIGNON.AUDIT_RESPONSIBILITY.
Then after that we disabled SignOn Audit Level to "NONE" to fix the problem, but when we try to run AutoConfig in any tier, we get next error message:
Attempting upload of Context file and templates to database...ERROR: InDbCtxFile.uploadCtx() : Exception : Error executng BEGIN fnd_gsm_util.upload_context_file(:1,:2,:3,:4,:5); END;: 1; Oracle error 100: ORA-01403: no data found has been detected in FND_GSM_UTIL.upload_context_file.
oracle.apps.ad.autoconfig.oam.InDbCtxFileException: Error executng BEGIN fnd_gsm_util.upload_context_file(:1,:2,:3,:4,:5); END;: 1; Oracle error 100: ORA-01403: no data found has been detected in FND_GSM_UTIL.upload_context_file.
at oracle.apps.ad.autoconfig.oam.InDbCtxFile.uploadCtx(InDbCtxFile.java:281)
at oracle.apps.ad.autoconfig.oam.CtxSynchronizer.uploadToDb(CtxSynchronizer.java:328)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBTmpl(FileSysDBCtxMerge.java:702)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBFiles(FileSysDBCtxMerge.java:223)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1663)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
We have executed FND_CONC_CLONE.SETUP_CLEAN to clear the FND_NODES table, but we are getting above error when we try to run AutoConfig in the database tier.
Any advice or help will be really appreciated.
This is a production issue and the system is down because of this problem
We are running on EBS 11.5.10.2 and RDBMS version is 10.2.0.3 on Solaris 64 bits.
Thanks in advance.
Kind regards,
Francisco

Oracle error 100: ORA-01403: no data found has been detected in FND_SIGNON.AUDIT_RESPONSIBILITY.
Then after that we disabled SignOn Audit Level to "NONE" to fix the problem, but when we try to run AutoConfig in any tier, we get next error message: Can you revert back this change and see if AutoConfig complete successfully?
Attempting upload of Context file and templates to database...ERROR: InDbCtxFile.uploadCtx() : Exception : Error executng BEGIN fnd_gsm_util.upload_context_file(:1,:2,:3,:4,:5); END;: 1; Oracle error 100: ORA-01403: no data found has been detected in FND_GSM_UTIL.upload_context_file.
oracle.apps.ad.autoconfig.oam.InDbCtxFileException: Error executng BEGIN fnd_gsm_util.upload_context_file(:1,:2,:3,:4,:5); END;: 1; Oracle error 100: ORA-01403: no data found has been detected in FND_GSM_UTIL.upload_context_file.
at oracle.apps.ad.autoconfig.oam.InDbCtxFile.uploadCtx(InDbCtxFile.java:281)
at oracle.apps.ad.autoconfig.oam.CtxSynchronizer.uploadToDb(CtxSynchronizer.java:328)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBTmpl(FileSysDBCtxMerge.java:702)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBFiles(FileSysDBCtxMerge.java:223)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1663)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)Same error is reported in (ORA-01403: no data found has been detected FND_GSM_UTIL.upload_context_file. [ID 420554.1]).
We have executed FND_CONC_CLONE.SETUP_CLEAN to clear the FND_NODES table, but we are getting above error when we try to run AutoConfig in the database tier.Do you have the latest AutoConfig patches applied?
Can you find any errors in the database log file?
This is a production issue and the system is down because of this problemFor production issues, please log a SR with severity 1
Thanks,
Hussein

ERROR: InDbCtxFile.uploadCtx() : Exception While Running Autoconfig

While running autoconfig, we are getting this error.
Attempting upload of Context file and templates to database...ERROR: InDbCtxFile.uploadCtx() : Exception : Error executng BEGIN fnd_gsm_util.upload_context_file(:1,:2,:3,:4,:5); END;: 1; The element reports_port is missing from the context file /u01/R12/inst/apps/upg_peabody/appl/admin/upg_peabody.xml. The context file upload will not continue.
oracle.apps.ad.autoconfig.oam.InDbCtxFileException: Error executng BEGIN fnd_gsm_util.upload_context_file(:1,:2,:3,:4,:5); END;: 1; The element reports_port is missing from the context file /u01/R12/inst/apps/upg_peabody/appl/admin/upg_peabody.xml. The context file upload will not continue.
at oracle.apps.ad.autoconfig.oam.InDbCtxFile.uploadCtx(InDbCtxFile.java:281)
at oracle.apps.ad.autoconfig.oam.CtxSynchronizer.uploadToDb(CtxSynchronizer.java:328)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBCtx(FileSysDBCtxMerge.java:678)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBFiles(FileSysDBCtxMerge.java:222)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1583)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:684)

If this is part of the upgrade,
yes< we are doing Upgrade 11i to R12
please note that Rapid Install (as it runs AutoConfig) records errors in the AutoConfig log file. These errors occur because the database has not yet been upgraded. They can be safely ignored. The errors will be resolved when you run Rapid Install (and AutoConfig) in Step 2 of the Finish the Upgrade section of Chapter 3.
Sawwan, We already upgraded database to 10g (10.2.0.4)

ADI - Excel is not running, or is not available.

Hi friends,
I am trying to upload the journal entries through ADI. When I try to do this I get the following error
"Excel is not running, or is not available. You cannot upload at this time.".
We are on 11.5.9 and the excel we are using is 2003. This was working absolutely fine earlier. Can some one let me know what the issue could be. Please note the Macro>Security> Options> Publisher Options. This is checked too.
Thanks

Hi;
"Excel is not running, or is not available. You cannot upload at this time.".
We are on 11.5.9 and the excel we are using is 2003. This was working absolutely fine earlier. Can some one let me know what the issue could be. Please note the Macro>Security> Options> Publisher Options. This is checked too.It was working before? So what have you been changed on your system? patch etc?
Please check below which could be helpful for your issue:
Journal Upload Errors With Excel Is Not Running, Or Is Not Available, You Cannot Upload At This Time [ID 243893.1]
Hope it helps
Regard
Helios

PATCH runs autoconfig or not?

Similar Messages

Maybe you are looking for