Patchadd ignores patch_list in Solaris 10 8/07?
Hello,
I have noticed that after upgrading to 8/07 I cannot patch multiple patches using a form of command:
patchadd -M /mnt patch_order
The output I get is:
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
No patches to check dependency.
However, patchadd -M /mnt works perfectly. That is, if patch_order is provided command fails but if its ommited it works fine. I have read somewhere that now patchadd is smart enough to sort everything out and figure out the right order in patch cluster.
I specifically checked in 11/06 and that form of patchadd command providing patch_list works perfectly.
Moreover, if jumpstarting 8/07 and using "patch" directive in the profile it does not work anymore displaying same messages as above. I am sure it's because of the same problem of the "new" patchadd behaviour in 8/07. I wouldn't be worried that much since manually there is always a workaround but it's disappointing that this very useful feature of specifying a patch cluster in jumpstart profile doesn't work anymore. One would need to get around with finish_script.
I am wondering did anyone notice the same thing and perhaps found and explanation/solution?
/M.
I assume that the FX update is grayed out because your login does not have permissions to write to the install directory.
Release of patch updates for FX/TB "when Sun deems it necessary" is EXACTLY what I am afraid of and want to avoid. Mozilla releases rather frequent updates with important security fixes. I want those updates immediately, not when Sun deems it necessary. Based on the performance of patches for Adobe Acrobat Reader and Adobe Flash, Sun is woefully slow on patch update releases for bundled third party software.
Mozilla releases s/w updates in Sun package format. Will there be some conflict with the Sun Update Manager/smpatch processes if I install the Mozilla packages over the bundled Mozilla software?
Another way to ask this question: Will Sun release patch updates for EVERY FX/TB release (e.g. 2.0.0.8, 2.0.0.9, etc.) or just releases that they deem important? Secondly, how long after Mozilla releases an update can we expect to receive a Solaris patch with that update?
Similar Messages
-
please can you tell solution, im try patchadd 119254-89 output: error is /usr/lib/patch/patchadd[2]: /usr/bin/ls: not found
i want update 10_reccomented patch updates 15******** to that solaris 10 u2 kernel 11********
which error im facing is:-
standby_node#
standby_node#patchadd 119254-89
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119254-89
Checking installed patches...
/usr/lib/patch/patchadd[2]: /usr/bin/ls: not found
Patchadd is terminating.
then im trying remove following pkg in that patch 119254-89
standby_node#unzip 10_Recommended_sparc.zip
Archive: 10_Recommended_sparc.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of 10_Recommended_sparc.zip or
10_Recommended_sparc.zip.zip, and cannot find 10_Recommended_sparc.zip.ZIP, period.
standby_node#pwd
/accel
standby_node#pkgrm SUNWpkgcmdsr
The following package is currently installed:
SUNWpkgcmdsr SVr4 package commands (root)
(sparc) 11.11,REV=2005.01.09.23.05
Do you want to remove this package? [y,n,?,q] Nov 21 15:57:48 standby_node last message repeated 1 time
y
## Removing installed package instance <SUNWpkgcmdsr>
## Verifying package <SUNWpkgcmdsr> dependencies in global zone
WARNING:
The <SUNWpkgcmdsu> package depends on the package
currently being removed.
Dependency checking failed.
Do you want to continue with the removal of this package [y,n,?,q] y
## Processing package information.
## Removing pathnames in class <none>
/var/spool/pkg
/var/spool <shared pathname not removed>
/var/sadm/security
/var/sadm/pkg <non-empty directory not removed>
/var/sadm/install/logs <non-empty directory not removed>
/var/sadm/install/admin/default
/var/sadm/install/admin
/var/sadm/install <non-empty directory not removed>
/var/sadm <shared pathname not removed>
/var <shared pathname not removed>
## Updating system information.
Removal of <SUNWpkgcmdsr> was successful.
actually i want to updates patch 10_recommented to that server solaris 10 u2 current kernel 11****** for this purpose only i do all those thing.
standby_node#unzip 10_Recommended_sparc.zip
Archive: 10_Recommended_sparc.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of 10_Recommended_sparc.zip or
10_Recommended_sparc.zip.zip, and cannot find 10_Recommended_sparc.zip.ZIP, period.
standby_node#pwd
standby_node#patchadd 119254-89
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SUNWpkgcmdsr from directory SUNWpkgcmdsr in patch 119254-89 is not installed on the system. Changes for package SUNWpkgcmdsr will not be applied to the system.
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119254-89
Checking installed patches...
Patchadd is terminating.
my motive is to updates patch kernel 11***** to 15***********
please can you anyone give solution for this.
by Ragavanthanks, but now iam facing new issue i dont know why it happen....
standby_node#./installpatchset --s10patchset
Setup ...
Recommended OS Patchset Solaris 10 SPARC (2014.05.16)
Patch 118833-36 will be applied shortly. Installation of the patch set will
halt after this patch is applied, and it will be necessary to reboot before
installation of the patch set can continue.
Application of patches started : 2014.11.25 14:53:01
Applying 120900-04 ( 1 of 377) ... skipped
Applying 121133-02 ( 2 of 377) ... skipped
Applying 119254-89 ( 3 of 377) ... skipped
Applying 119317-01 ( 4 of 377) ... skipped
Applying 121296-01 ( 5 of 377) ... skipped
Applying 138215-01 ( 6 of 377) ... skipped
Applying 148336-01 ( 7 of 377) ... skipped
Applying 146054-07 ( 8 of 377) ... skipped
Applying 142251-02 ( 9 of 377) ... skipped
Applying 125555-15 ( 10 of 377) ... skipped
Applying 118367-04 ( 11 of 377) ... skipped
Applying 118666-65 ( 12 of 377) ... skipped
Applying 118667-65 ( 13 of 377) ... skipped
Applying 118705-02 ( 14 of 377) ... skipped
Applying 118706-01 ( 15 of 377) ... skipped
Applying 118707-05 ( 16 of 377) ... skipped
Applying 118708-19 ( 17 of 377) ... skipped
Applying 118711-03 ( 18 of 377) ... skipped
Applying 118712-23 ( 19 of 377) ... skipped
Applying 118718-06 ( 20 of 377) ... skipped
Applying 118777-16 ( 21 of 377) ... skipped
Applying 121181-05 ( 22 of 377) ... skipped
Applying 118918-24 ( 23 of 377) ... skipped
Applying 138217-01 ( 24 of 377) ... skipped
Applying 119578-30 ( 25 of 377) ... skipped
Applying 140860-02 ( 26 of 377) ... skipped
Applying 121453-02 ( 27 of 377) ... skipped
Applying 121453-02 ( 28 of 377) ... skipped
Applying 121118-19 ( 29 of 377) ... skipped
Applying 118833-36 ( 30 of 377) ... skipped
Applying 118945-01 ( 31 of 377) ... skipped
Applying 118981-03 ( 32 of 377) ... skipped
Applying 119059-66 ( 33 of 377) ... skipped
Applying 119063-01 ( 34 of 377) ... skipped
Applying 119081-25 ( 35 of 377) ... skipped
Applying 119115-35 ( 36 of 377) ... skipped
Applying 119117-52 ( 37 of 377) ... skipped
Applying 119130-33 ( 38 of 377) ... skipped
Applying 119213-27 ( 39 of 377) ... skipped
Applying 119246-39 ( 40 of 377) ... skipped
Applying 124628-10 ( 41 of 377) ... skipped
Applying 119252-29 ( 42 of 377) ... skipped
Applying 123611-04 ( 43 of 377) ... skipped
Applying 119280-25 ( 44 of 377) ... skipped
Applying 119278-38 ( 45 of 377) ... skipped
Applying 119282-01 ( 46 of 377) ... skipped
Applying 119309-03 ( 47 of 377) ... skipped
Applying 140899-01 ( 48 of 377) ... skipped
Applying 119313-42 ( 49 of 377) ... skipped
Applying 124188-03 ( 50 of 377) ... skipped
Applying 119315-19 ( 51 of 377) ... skipped
Applying 120199-15 ( 52 of 377) ... skipped
Applying 119534-29 ( 53 of 377) ... skipped
Applying 119538-19 ( 54 of 377) ... skipped
Applying 120099-08 ( 55 of 377) ... skipped
Applying 119546-08 ( 56 of 377) ... skipped
Applying 119548-14 ( 57 of 377) ... skipped
Applying 119648-03 ( 58 of 377) ... skipped
Applying 120272-31 ( 59 of 377) ... skipped
Applying 122640-05 ( 60 of 377) ... skipped
Applying 126897-02 ( 61 of 377) ... skipped
Applying 127755-01 ( 62 of 377) ... skipped
Applying 125503-02 ( 63 of 377) ... skipped
Applying 118731-01 ( 64 of 377) ... skipped
Applying 124204-04 ( 65 of 377) ... skipped
Applying 122660-10 ( 66 of 377) ... skipped
Applying 125547-02 ( 67 of 377) ... skipped
Applying 140796-01 ( 68 of 377) ... skipped
Applying 120011-14 ( 69 of 377) ... skipped
Applying 139520-02 ( 70 of 377) ... skipped
Applying 119757-32 ( 71 of 377) ... skipped
Applying 119764-07 ( 72 of 377) ... skipped
Applying 119783-28 ( 73 of 377) ... skipped
Applying 119810-07 ( 74 of 377) ... skipped
Applying 119812-18 ( 75 of 377) ... skipped
Applying 119900-16 ( 76 of 377) ... skipped
Applying 119903-02 ( 77 of 377) ... skipped
Applying 119906-18 ( 78 of 377) ... skipped
Applying 119955-05 ( 79 of 377) ... skipped
Applying 119963-24 ( 80 of 377) ... skipped
Applying 119966-01 ( 81 of 377) ... skipped
Applying 119986-03 ( 82 of 377) ... skipped
Applying 120094-35 ( 83 of 377) ... skipped
Applying 120101-01 ( 84 of 377) ... skipped
Applying 120195-02 ( 85 of 377) ... skipped
Applying 120201-06 ( 86 of 377) ... skipped
Applying 120256-01 ( 87 of 377) ... skipped
Applying 120284-07 ( 88 of 377) ... skipped
Applying 120460-17 ( 89 of 377) ... skipped
Applying 119368-04 ( 90 of 377) ... skipped
Applying 120286-03 ( 91 of 377) ... skipped
Applying 120292-02 ( 92 of 377) ... skipped
Applying 120348-03 ( 93 of 377) ... skipped
Applying 121975-01 ( 94 of 377) ... skipped
Applying 120410-33 ( 95 of 377) ... skipped
Applying 120412-11 ( 96 of 377) ... skipped
Applying 120414-27 ( 97 of 377) ... skipped
Applying 120543-33 ( 98 of 377) ... skipped
Applying 120719-06 ( 99 of 377) ... skipped
Applying 120732-01 (100 of 377) ... skipped
Applying 120739-08 (101 of 377) ... skipped
Applying 120753-09 (102 of 377) ... skipped
Applying 120811-09 (103 of 377) ... skipped
Applying 120812-32 (104 of 377) ... skipped
Applying 120815-01 (105 of 377) ... skipped
Applying 120830-06 (106 of 377) ... skipped
Applying 120849-04 (107 of 377) ... skipped
Applying 120928-32 (108 of 377) ... skipped
Applying 121095-04 (109 of 377) ... skipped
Applying 121104-11 (110 of 377) ... skipped
Applying 121136-02 (111 of 377) ... skipped
Applying 121211-02 (112 of 377) ... skipped
Applying 121308-20 (113 of 377) ... skipped
Applying 121337-01 (114 of 377) ... skipped
Applying 120235-01 (115 of 377) ... skipped
Applying 121428-15 (116 of 377) ... skipped
Applying 121606-04 (117 of 377) ... skipped
Applying 121946-01 (118 of 377) ... skipped
Applying 122031-01 (119 of 377) ... skipped
Applying 122212-46 (120 of 377) ... skipped
Applying 122259-06 (121 of 377) ... skipped
Applying 122470-03 (122 of 377) ... skipped
Applying 122472-07 (123 of 377) ... skipped
Applying 122911-33 (124 of 377) ... skipped
Applying 123003-04 (125 of 377) ... skipped
Applying 124171-07 (126 of 377) ... skipped
Applying 123630-03 (127 of 377) ... skipped
Applying 123005-07 (128 of 377) ... skipped
Applying 123252-01 (129 of 377) ... skipped
Applying 123301-01 (130 of 377) ... skipped
Applying 123358-02 (131 of 377) ... skipped
Applying 123526-01 (132 of 377) ... skipped
Applying 123590-12 (133 of 377) ... skipped
Applying 123893-77 (134 of 377) ... skipped
Applying 123938-02 (135 of 377) ... skipped
Applying 124149-16 (136 of 377) ... skipped
Applying 124325-01 (137 of 377) ... skipped
Applying 124393-11 (138 of 377) ... skipped
Applying 124397-02 (139 of 377) ... skipped
Applying 124457-02 (140 of 377) ... skipped
Applying 124630-42 (141 of 377) ... skipped
Applying 124939-05 (142 of 377) ... skipped
Applying 124997-01 (143 of 377) ... skipped
Applying 125075-01 (144 of 377) ... skipped
Applying 125136-75 (145 of 377) ... skipped
Applying 125137-75 (146 of 377) ... skipped
Applying 125215-04 (147 of 377) ... skipped
Applying 125279-05 (148 of 377) ... skipped
Applying 125332-24 (149 of 377) ... skipped
Applying 125505-01 (150 of 377) ... skipped
Applying 125533-17 (151 of 377) ... skipped
Applying 125670-04 (152 of 377) ... skipped
Applying 125719-42 (153 of 377) ... skipped
Applying 125725-03 (154 of 377) ... skipped
Applying 125731-11 (155 of 377) ... skipped
Applying 125891-01 (156 of 377) ... skipped
Applying 126119-02 (157 of 377) ... skipped
Applying 126206-10 (158 of 377) ... skipped
Applying 126363-08 (159 of 377) ... skipped
Applying 126365-16 (160 of 377) ... skipped
Applying 126425-01 (161 of 377) ... skipped
Applying 126440-01 (162 of 377) ... skipped
Applying 126540-02 (163 of 377) ... skipped
Applying 126546-04 (164 of 377) ... skipped
Applying 126868-04 (165 of 377) ... skipped
Applying 127127-11 (166 of 377) ... skipped
Applying 127724-02 (167 of 377) ... skipped
Applying 127752-01 (168 of 377) ... skipped
Applying 127872-02 (169 of 377) ... skipped
Applying 128292-01 (170 of 377) ... skipped
Applying 128298-02 (171 of 377) ... skipped
Applying 128310-01 (172 of 377) ... skipped
Applying 128332-01 (173 of 377) ... skipped
Applying 136882-03 (174 of 377) ... skipped
Applying 136998-10 (175 of 377) ... skipped
Applying 137000-08 (176 of 377) ... skipped
Applying 137004-09 (177 of 377) ... skipped
Applying 137032-01 (178 of 377) ... skipped
Applying 137080-07 (179 of 377) ... skipped
Applying 137090-02 (180 of 377) ... skipped
Applying 137093-01 (181 of 377) ... skipped
Applying 137097-02 (182 of 377) ... skipped
Applying 137102-01 (183 of 377) ... skipped
Applying 137115-01 (184 of 377) ... skipped
Applying 138866-03 (185 of 377) ... skipped
Applying 137137-09 (186 of 377) ... skipped
Applying 137147-07 (187 of 377) ... skipped
Applying 137282-01 (188 of 377) ... skipped
Applying 137321-02 (189 of 377) ... skipped
Applying 137871-02 (190 of 377) ... skipped
Applying 138096-02 (191 of 377) ... skipped
Applying 138181-01 (192 of 377) ... skipped
Applying 138195-04 (193 of 377) ... skipped
Applying 138245-01 (194 of 377) ... skipped
Applying 138247-01 (195 of 377) ... skipped
Applying 138361-01 (196 of 377) ... skipped
Applying 138647-01 (197 of 377) ... skipped
Applying 138649-01 (198 of 377) ... skipped
Applying 138766-01 (199 of 377) ... skipped
Applying 138822-12 (200 of 377) ... skipped
Applying 138824-12 (201 of 377) ... skipped
Applying 138826-12 (202 of 377) ... skipped
Applying 138852-01 (203 of 377) ... skipped
Applying 138854-01 (204 of 377) ... skipped
Applying 138876-01 (205 of 377) ... skipped
Applying 139099-04 (206 of 377) ... skipped
Applying 139289-02 (207 of 377) ... skipped
Applying 139291-02 (208 of 377) ... skipped
Applying 141016-01 (209 of 377) ... skipped
Applying 139555-08 (210 of 377) ... skipped
Applying 139615-01 (211 of 377) ... skipped
Applying 139620-01 (212 of 377) ... skipped
Applying 139962-02 (213 of 377) ... skipped
Applying 139980-01 (214 of 377) ... skipped
Applying 139986-01 (215 of 377) ... skipped
Applying 140455-01 (216 of 377) ... skipped
Applying 140912-01 (217 of 377) ... skipped
Applying 141032-01 (218 of 377) ... skipped
Applying 141104-04 (219 of 377) ... skipped
Applying 142292-01 (220 of 377) ... skipped
Applying 141444-09 (221 of 377) ... skipped
Applying 141496-01 (222 of 377) ... skipped
Applying 141532-04 (223 of 377) ... skipped
Applying 141548-01 (224 of 377) ... skipped
Applying 141558-01 (225 of 377) ... skipped
Applying 141586-01 (226 of 377) ... skipped
Applying 142049-01 (227 of 377) ... skipped
Applying 142088-02 (228 of 377) ... skipped
Applying 142234-01 (229 of 377) ... skipped
Applying 142240-01 (230 of 377) ... skipped
Applying 142244-02 (231 of 377) ... skipped
Applying 142340-02 (232 of 377) ... skipped
Applying 142373-02 (233 of 377) ... skipped
Applying 142394-01 (234 of 377) ... skipped
Applying 142397-01 (235 of 377) ... skipped
Applying 142428-02 (236 of 377) ... skipped
Applying 142430-01 (237 of 377) ... skipped
Applying 142529-01 (238 of 377) ... skipped
Applying 142543-01 (239 of 377) ... skipped
Applying 142911-01 (240 of 377) ... skipped
Applying 142933-05 (241 of 377) ... skipped
Applying 142909-17 (242 of 377) ... skipped
Applying 143317-03 (243 of 377) ... skipped
Applying 143502-01 (244 of 377) ... skipped
Applying 143506-07 (245 of 377) ... skipped
Applying 143527-01 (246 of 377) ... skipped
Applying 143609-03 (247 of 377) ... skipped
Applying 144526-02 (248 of 377) ... skipped
Applying 144500-19 (249 of 377) ... skipped
Applying 143643-08 (250 of 377) ... skipped
Applying 143651-01 (251 of 377) ... skipped
Applying 144664-01 (252 of 377) ... skipped
Applying 143725-02 (253 of 377) ... skipped
Applying 143727-02 (254 of 377) ... skipped
Applying 143731-01 (255 of 377) ... skipped
Applying 143733-01 (256 of 377) ... skipped
Applying 143739-01 (257 of 377) ... skipped
Applying 143954-04 (258 of 377) ... skipped
Applying 144047-01 (259 of 377) ... skipped
Applying 144106-01 (260 of 377) ... skipped
Applying 144112-02 (261 of 377) ... skipped
Applying 144188-02 (262 of 377) ... skipped
Applying 144325-01 (263 of 377) ... skipped
Applying 144327-02 (264 of 377) ... skipped
Applying 144455-01 (265 of 377) ... skipped
Applying 144486-05 (266 of 377) ... skipped
Applying 144492-01 (267 of 377) ... skipped
Applying 144569-01 (268 of 377) ... skipped
Applying 147002-01 (269 of 377) ... skipped
Applying 144872-03 (270 of 377) ... skipped
Applying 144909-03 (271 of 377) ... skipped
Applying 144911-02 (272 of 377) ... skipped
Applying 144994-02 (273 of 377) ... skipped
Applying 144996-02 (274 of 377) ... skipped
Applying 145006-04 (275 of 377) ... skipped
Applying 145023-01 (276 of 377) ... skipped
Applying 147217-02 (277 of 377) ... skipped
Applying 145080-13 (278 of 377) ... skipped
Applying 145096-03 (279 of 377) ... skipped
Applying 145120-01 (280 of 377) ... skipped
Applying 145200-13 (281 of 377) ... skipped
Applying 145929-05 (282 of 377) ... skipped
Applying 145953-07 (283 of 377) ... skipped
Applying 147442-01 (284 of 377) ... skipped
Applying 147147-26 (285 of 377) ... skipped
Applying 147143-17 (286 of 377) ... skipped
Applying 146334-01 (287 of 377) ... skipped
Applying 146489-06 (288 of 377) ... skipped
Applying 146582-04 (289 of 377) ... skipped
Applying 146673-01 (290 of 377) ... skipped
Applying 146679-01 (291 of 377) ... skipped
Applying 146681-02 (292 of 377) ... skipped
Applying 146683-01 (293 of 377) ... skipped
Applying 146694-02 (294 of 377) ... skipped
Applying 146834-02 (295 of 377) ... skipped
Applying 146954-03 (296 of 377) ... skipped
Applying 147023-01 (297 of 377) ... skipped
Applying 147194-03 (298 of 377) ... skipped
Applying 147227-01 (299 of 377) ... skipped
Applying 147272-01 (300 of 377) ... skipped
Applying 147378-01 (301 of 377) ... skipped
Applying 147673-08 (302 of 377) ... skipped
Applying 147692-55 (303 of 377) ... skipped
Applying 147693-55 (304 of 377) ... skipped
Applying 147793-12 (305 of 377) ... skipped
Applying 147797-04 (306 of 377) ... skipped
Applying 147805-01 (307 of 377) ... skipped
Applying 147992-06 (308 of 377) ... skipped
Applying 148002-01 (309 of 377) ... skipped
Applying 148004-01 (310 of 377) ... skipped
Applying 148006-01 (311 of 377) ... skipped
Applying 148027-03 (312 of 377) ... skipped
Applying 148049-04 (313 of 377) ... skipped
Applying 148071-12 (314 of 377) ... skipped
Applying 148104-11 (315 of 377) ... skipped
Applying 148112-02 (316 of 377) ... skipped
Applying 148135-01 (317 of 377) ... skipped
Applying 148165-02 (318 of 377) ... skipped
Applying 148241-02 (319 of 377) ... skipped
Applying 148322-07 (320 of 377) ... skipped
Applying 148324-06 (321 of 377) ... skipped
Applying 148342-06 (322 of 377) ... skipped
Applying 148383-01 (323 of 377) ... skipped
Applying 148403-01 (324 of 377) ... skipped
Applying 148407-01 (325 of 377) ... skipped
Applying 148412-02 (326 of 377) ... skipped
Applying 148423-01 (327 of 377) ... skipped
Applying 148559-08 (328 of 377) ... skipped
Applying 148561-06 (329 of 377) ... skipped
Applying 148565-01 (330 of 377) ... skipped
Applying 148625-01 (331 of 377) ... skipped
Applying 148657-01 (332 of 377) ... skipped
Applying 148693-01 (333 of 377) ... skipped
Applying 148768-01 (334 of 377) ... skipped
Applying 148870-01 (335 of 377) ... skipped
Applying 150435-01 (336 of 377) ... skipped
Applying 148888-05 (337 of 377) ... skipped
Applying 148948-01 (338 of 377) ... skipped
Applying 148975-01 (339 of 377) ... skipped
Applying 149067-01 (340 of 377) ... skipped
Applying 149071-01 (341 of 377) ... skipped
Applying 149075-01 (342 of 377) ... skipped
Applying 149108-01 (343 of 377) ... skipped
Applying 149112-01 (344 of 377) ... skipped
Applying 149149-01 (345 of 377) ... skipped
Applying 149163-01 (346 of 377) ... skipped
Applying 149165-01 (347 of 377) ... skipped
Applying 149279-02 (348 of 377) ... skipped
Applying 121081-08 (349 of 377) ... skipped
Applying 149453-02 (350 of 377) ... skipped
Applying 149483-01 (351 of 377) ... skipped
Applying 149638-02 (352 of 377) ... skipped
Applying 149646-02 (353 of 377) ... skipped
Applying 149648-03 (354 of 377) ... skipped
Applying 150025-01 (355 of 377) ... skipped
Applying 150400-11 (356 of 377) ... skipped
Applying 150031-05 (357 of 377) ... skipped
Applying 150107-02 (358 of 377) ... skipped
Applying 150113-02 (359 of 377) ... skipped
Applying 150123-01 (360 of 377) ... skipped
Applying 150157-01 (361 of 377) ... skipped
Applying 150180-01 (362 of 377) ... skipped
Applying 150307-01 (363 of 377) ... skipped
Applying 150310-01 (364 of 377) ... skipped
Applying 150312-04 (365 of 377) ... skipped
Applying 150383-02 (366 of 377) ... skipped
Applying 150534-01 (367 of 377) ... skipped
Applying 150535-01 (368 of 377) ... skipped
Applying 150537-01 (369 of 377) ... skipped
Applying 150539-01 (370 of 377) ... skipped
Applying 150616-01 (371 of 377) ... skipped
Applying 150618-02 (372 of 377) ... skipped
Applying 150631-02 (373 of 377) ... skipped
Applying 150756-03 (374 of 377) ... skipped
Applying 150836-01 (375 of 377) ... skipped
Applying 150840-01 (376 of 377) ... skipped
Applying 151145-01 (377 of 377) ... skipped
Application of patches finished : 2014.11.25 15:06:13
Following patches were skipped :
Patches already applied
120900-04 121453-02 119282-01 120256-01 120849-04
121133-02 121453-02 122640-05 119368-04 121337-01
119254-89 118945-01 118731-01 121975-01 120235-01
121296-01 118981-03 119986-03 120732-01 121946-01
118706-01 119063-01 120101-01
Patches not applicable to packages on the system
119317-01 119906-18 124939-05 138826-12 145200-13
138215-01 119955-05 124997-01 138852-01 145929-05
148336-01 119963-24 125136-75 138854-01 147442-01
146054-07 119966-01 125137-75 139099-04 146673-01
142251-02 120094-35 125215-04 139289-02 146679-01
125555-15 120195-02 125279-05 139291-02 147023-01
118367-04 120201-06 125332-24 141016-01 147227-01
118666-65 120284-07 125505-01 139615-01 147272-01
118667-65 120460-17 125533-17 139620-01 147378-01
118705-02 120286-03 125670-04 139986-01 147673-08
118707-05 120292-02 125725-03 140455-01 147692-55
118708-19 120348-03 125731-11 141032-01 147693-55
118711-03 120412-11 125891-01 141104-04 147992-06
118712-23 120414-27 126119-02 142292-01 148002-01
118718-06 120543-33 126363-08 141496-01 148004-01
118777-16 120719-06 126365-16 141558-01 148006-01
121181-05 120739-08 126425-01 142049-01 148135-01
118918-24 120753-09 126440-01 142088-02 148322-07
138217-01 120811-09 126540-02 142234-01 148324-06
119578-30 120812-32 126546-04 142244-02 148342-06
140860-02 120815-01 126868-04 142373-02 148383-01
121118-19 120830-06 127752-01 142529-01 148423-01
119059-66 120928-32 127872-02 142911-01 148559-08
119081-25 121095-04 128292-01 142933-05 148565-01
119115-35 121104-11 128298-02 143502-01 148625-01
119117-52 121211-02 136882-03 143527-01 148768-01
119213-27 121606-04 136998-10 143643-08 148870-01
119246-39 122031-01 137000-08 143651-01 150435-01
123611-04 122212-46 137004-09 144664-01 148975-01
119309-03 122259-06 137080-07 143725-02 149067-01
140899-01 122470-03 137090-02 143727-02 149071-01
119313-42 122472-07 137093-01 143731-01 149075-01
124188-03 122911-33 137097-02 143733-01 149108-01
119538-19 123003-04 137102-01 143739-01 149112-01
120099-08 124171-07 137147-07 144047-01 149149-01
119548-14 123252-01 137321-02 144112-02 149163-01
119648-03 123301-01 137871-02 144325-01 121081-08
125547-02 123358-02 138195-04 144327-02 149483-01
140796-01 123526-01 138247-01 147002-01 150031-05
139520-02 123590-12 138361-01 144994-02 150107-02
119764-07 123893-77 138647-01 144996-02 150157-01
119783-28 123938-02 138649-01 145006-04 150616-01
119810-07 124149-16 138766-01 145023-01 150618-02
119812-18 124325-01 138822-12 147217-02 150840-01
119900-16 124397-02 138824-12 145080-13 151145-01
119903-02 124457-02
Patches missing one or more required patches
118833-36 125075-01 142394-01 147143-17 148693-01
119130-33 125719-42 142397-01 146334-01 148888-05
124628-10 126206-10 142428-02 146489-06 148948-01
119252-29 127127-11 142430-01 146582-04 149165-01
119280-25 127724-02 142543-01 146681-02 149279-02
119278-38 128310-01 142909-17 146683-01 149453-02
119315-19 128332-01 143317-03 146694-02 149638-02
120199-15 137032-01 143506-07 146834-02 149646-02
119534-29 137115-01 143609-03 146954-03 149648-03
119546-08 138866-03 144526-02 147194-03 150025-01
120272-31 137137-09 144500-19 147793-12 150400-11
126897-02 137282-01 143954-04 147797-04 150113-02
127755-01 138096-02 144106-01 147805-01 150123-01
125503-02 138181-01 144188-02 148027-03 150180-01
124204-04 138245-01 144455-01 148049-04 150307-01
122660-10 138876-01 144486-05 148071-12 150310-01
120011-14 139555-08 144492-01 148104-11 150312-04
119757-32 139962-02 144569-01 148112-02 150383-02
120410-33 139980-01 144872-03 148165-02 150534-01
121136-02 140912-01 144909-03 148241-02 150535-01
121308-20 141444-09 144911-02 148403-01 150537-01
121428-15 141532-04 145096-03 148407-01 150539-01
123630-03 141548-01 145120-01 148412-02 150631-02
123005-07 141586-01 145953-07 148561-06 150756-03
124393-11 142240-01 147147-26 148657-01 150836-01
124630-42 142340-02
No patches were applied.
Install log files written :
/var/sadm/install_data/s10s_rec_patchset_short_2014.11.25_14.53.01.log
/var/sadm/install_data/s10s_rec_patchset_verbose_2014.11.25_14.53.01.log
standby_node#
standby_node#
standby_node#uname -a
SunOS standby_node 5.10 Generic_118833-17 sun4v sparc SUNW,Sun-Fire-T200
standby_node#
standby_node#
standby_node#iniy t 6
standby_node#
standby_node#
standby_node#
all patch skipped i dont why can u any solution for that??? -
Is there any way to install Solaris 8 on a sun v215? When I try to boot from cdrom, the server starts to read the DVD then stops and complains about not finding a path to kernel. The Solaris 10 out of the box install shows the platform to be sun4u which is the same as the older v210s we have. The CPUs are also both Sparc IIIi's so I'm not sure why it won't install. Please help...
Also, I just realized the v215 isn't even on the HCL yet. Why is that?
Message was edited by:
rrancaniSometinmes it seems to take a comparison to others before understanding arrives.
Microsoft no longer provides support for Windows 98, either,
despite the fact that there are many corporate users still running it.
Why does the size of an installed base define whether support will be provided?
Now, considering your question from a hardware functionality viewpoint,
and once again using the Redmond company as an example,
I dare you to try to install Windows 98 on a new Core 2 Duo system.
It won't work, and Microsoft is not about to put functionality for it onto that old Win9x kernel.
You could ask them until you run out of breath and they would ignore you.
Solaris 8 is about to be discontinued. It won't be re-engineered to work
in hardware that gets invented now and into the future.
Solaris EOL Policy
You could choose to just not buy the computer,
or you could realize you must run a mixed-Solaris company (8, 9, and 10),
or you could migrate everything to (and learn the nuances of) a newer Solaris. -
VNC fails to start at bootup on Solaris 10 (SPARC)
<div align="left">
regardless of what i do, i am unable to get vnc to start automatically at bootup. however, i can manually start it by either executing the startup script or vncserver, directly, w/ no problems.
first off, please forgive my ignorance. i know solaris well enough to be extremely dangerous but, not enough to be a full-blown sysadmin/programmer. second, my login is always as root. with that being said, here's what i've done...
i have vnc installed in /usr/vnc411:
-r-xr-xr-x 1 502 staff 3239328 Mar 11 2005 Xvnc
-r-xr-xr-x 1 502 staff 903308 Mar 11 2005 vncconfig
-r-xr-xr-x 1 502 staff 176500 Mar 11 2005 vncpasswd
-rwxr-xr-x 1 502 staff 13938 Feb 23 2005 vncserver
-r-xr-xr-x 1 502 staff 1357944 Mar 11 2005 vncviewer
-r-xr-xr-x 1 502 staff 1301428 Mar 11 2005 x0vncserver
the startup script is /etc/rc2.d/S99vnc. the script's contents:
/usr/vnc411/vncserver
the script's file permissions:
-rwxr--r-- 1 root sys 22 Feb 10 11:47 S99vnc
at first, i thought it may have to do w/ the smf feature of solaris 10 but, it's stated that 10 still provides legacy support of the use of rc scripts. so, at this point, i'm at a loss.
i would be grateful for any assistance you solaris gurus can provide.
thank you, kindly.
</div><div align="left">
regardless of what i do, i am unable to get vnc to start automatically at bootup. however, i can manually start it by either executing the startup script or vncserver, directly, w/ no problems.
first off, please forgive my ignorance. i know solaris well enough to be extremely dangerous but, not enough to be a full-blown sysadmin/programmer. second, my login is always as root. with that being said, here's what i've done...
i have vnc installed in /usr/vnc411:
-r-xr-xr-x 1 502 staff 3239328 Mar 11 2005 Xvnc
-r-xr-xr-x 1 502 staff 903308 Mar 11 2005 vncconfig
-r-xr-xr-x 1 502 staff 176500 Mar 11 2005 vncpasswd
-rwxr-xr-x 1 502 staff 13938 Feb 23 2005 vncserver
-r-xr-xr-x 1 502 staff 1357944 Mar 11 2005 vncviewer
-r-xr-xr-x 1 502 staff 1301428 Mar 11 2005 x0vncserver
the startup script is /etc/rc2.d/S99vnc. the script's contents:
/usr/vnc411/vncserver
the script's file permissions:
-rwxr--r-- 1 root sys 22 Feb 10 11:47 S99vnc
at first, i thought it may have to do w/ the smf feature of solaris 10 but, it's stated that 10 still provides legacy support of the use of rc scripts. so, at this point, i'm at a loss.
i would be grateful for any assistance you solaris gurus can provide.
thank you, kindly.
</div> -
AM Patch 120954-03 - Problems with Fetching Sessions
Hi.
I am encountering weird behaviour with AM when it comes to fetching sessions from other AM servers.
I applied patch 120954-03 (didn't have -02 or 01 patch installed), and then ran the following commands, on two environments (both environments are identical, each with two AM hosts). Things work perfectly on one, but not on the other. Tried everything, including AM reinstallation. But no luck. Problem comes up as soon as I apply the patch, and run the subsequent commands.
Error received is Failed to get valid Sessions from the Specified server. According to the release notes, this could occur if the DIT was from an older AM installation. But in my case, its been AM 7 through out; absolutely clean machine before that.
Is there something wrong in the sequence of commands that I am running? I run the following commands one at a time on each host (ie, 1. on both, then 2. on both...). Is there some other way to go about this?
Also, I have two Directory servers for AM (with multi-master replication). Should I specify different directory servers during running the patch on both the hosts, or should I specify the same host, or can I specify the DPS distributing load over the two DS?
Thanks a ton! Sincerely appreciate it.
Commands executed after patchadd 120954-03 :
1. Have all services up
2. Backup Directory servers
3. patchadd 120954-03 (its Solaris 9)
4. Edit /opt/SUNWam/amsilent
5. cd /AccessManager-base/bin/; ./amconfig -s /opt/SUNWam/amsilent
6. ./amserver stop
7. ./amserver start
8. Restart AM instances
9. cd /DirectoryServer-Base/shared/bin; ./ldapmodify -h hostname -p port_number -D "cn=Directory Manager" -w <DIRMGRPASSWD> -a -f /etc/opt/SUNWam/accountLockout.ldif
10. /opt/SUNWam/bin/amadmin -u amadmin -w <AMADMINPASSWORD> -t /etc/opt/SUNWam/accountLockoutData.xml
11. /AccessManager-base/bin/amadmin -u amadmin -w amadmin_password -s /etc/opt/SUNWam/AddLDAPFilterCondition.xml
12. /AccessManager-base/bin/amadmin -u amadmin -w amadmin_password -t /etc/opt/SUNWam/amPolicyConfig_mod_ldfc.xml
13. /opt/SUNWam/bin/amadmin -u amadmin -w amadmin_password -t /etc/opt/SUNWam/idRepoServiceAddAttrSchemaRequest_Cache.xml
14. /AccessManager-base/bin/amadmin -u amadmin -w amadmin_password -t /etc/opt/SUNWam/wsf1.1_upgrade.xml
15. Restart AM instances.I am getting the somewhat thesame issue. Exept I'm getting the LoginLoutMapping issue. I have the same setup also with 2 masters. I applied this patch to my dev env which has only oner ds server and its on the same machine and didn't have any issues. Hopefully someone can shed some lite. I had no prob before the patch. Backing the patch out does work but it's weird that it wont work on my prod env
-
Precompiled classes ignored on Solaris
I'm precompiling all of my jsps on NT and deploying them on Solaris. The
classes seem to be ignored and the server always generates a new java file
and compiles at runtime.
I am using Weblogic 5.10 SP9. I have the following configuration
case sensitivity is on during the compile, the correct case files are
generated and used on NT
the timestamps of the class files don't seem to matter
pageCheck is -1
Thanks
Rob
You must preserve the timestamps on the .jsp files between Solaris and NT. WL does
not look at the timestamps on the .class files to decide whether or not to compile
a jsp. It checks the date on the .jsp file against ... (the date on the .jsp file
at the time it was compiled). Compile with -keepgenerated and look at the resulting
.java file to see this.
It also checks that it was compiled with the same version/service pack.
Mike
"Rob Murtha" <[email protected]> wrote:
>I'm precompiling all of my jsps on NT and deploying them on Solaris.
>The
>classes seem to be ignored and the server always generates a new java
>file
>and compiles at runtime.
>
>I am using Weblogic 5.10 SP9. I have the following configuration
>
>case sensitivity is on during the compile, the correct case files are
>generated and used on NT
>the timestamps of the class files don't seem to matter
>pageCheck is -1
>
>Thanks
>Rob
>
>
-
Precompiled JSP classes are ignored on Solaris
I'm using Weblogic 5.10 SP9, building on NT and deploying on Solaris. I
precompile the JSP files but the classes are ignored on Solaris. I tried
touching all of the classes to ensure that it is not a date issue but that
didn't help. I also put the pageCheckSeconds to -1. I also use the
weblogic.httpd.windows.caseSensitive flag and when the generated files are
compiled they are placed in the same location with the same names and top
level package.
Thanks,
Rob
You must preserve the timestamps on the .jsp files between Solaris and NT. WL does
not look at the timestamps on the .class files to decide whether or not to compile
a jsp. It checks the date on the .jsp file against ... (the date on the .jsp file
at the time it was compiled). Compile with -keepgenerated and look at the resulting
.java file to see this.
It also checks that it was compiled with the same version/service pack.
Mike
"Rob Murtha" <[email protected]> wrote:
>I'm precompiling all of my jsps on NT and deploying them on Solaris.
>The
>classes seem to be ignored and the server always generates a new java
>file
>and compiles at runtime.
>
>I am using Weblogic 5.10 SP9. I have the following configuration
>
>case sensitivity is on during the compile, the correct case files are
>generated and used on NT
>the timestamps of the class files don't seem to matter
>pageCheck is -1
>
>Thanks
>Rob
>
>
-
X ignores keyboard input during the installation of Solaris 10
Hi!
I have a problem when I'm trying to install Solaris 10 on my Ultra 5. After hardware detection phase passed, X starts up, displays a terminal window and asks to choose the locale. But when I'm trying to type something - nothing happens. What is the problem?
PS.: I have no Sun mouse, so I'm booting w/o mouse. I've also tried to connect USB mouse to the USB PCI Hub that i've plug into the PCI slot. It is D-Link DU-520 based on the NEC chip, and before I got no problems with it.
ThanxHi. I'm having the same problem with the installation on my laptop and it doesn't have to do anything with the focus of the window. I've read in other posts that it might be a problem with usb keyboards. Have you allready found a way to work this arround?
-
Solaris 8 ignores /etc/dt/config/C/Xresources
i'm trying to load that resource for all users:
XTerm*scrollBar: true
i've put it into
/etc/dt/config/C/Xresources
/etc/dt/config/Xresources
/usr/dt/config/C/Xresources
/usr/dt/config/Xresources
$HOME/.Xresources
but it doesn't work, howether loading it manually like xrdb /path/Xresources and then starting xterm again works well (for current session)
Solaris is just fresh installed
How to solve this?Update:
I shutdown the domain, pulled the boot disk, and replaced it with a clean drive. I built the system with Solaris 10 05/08 then patched with the latest reccomended patch cluster. My HBA is a Qlogic 2342 connecting to Cisco 9509 switches connected to a NetApp fas box (not 100% sure on the model atm, but very high end).
I configured the same lun I had on the solaris 8 box then mounted it up. All my data files are intact so I began some testing to see if the performance was any different.
I ran several timed sequential 10Gb writes and hit a max throughput of about 170Mb a sec on the lun. This is rather sad really, as it's not even hitting 2Gb FC speeds. I really punished the system with several parallel 10Gb writes, 10Gb reads, and 4k writes and reads. I never really achieved more than about 15k IOPs to the lun, and never exceded peak 190Mb a second. Under the heavy load the device queue really stacked up. The filesystem is UFS on the lun.
We're going to try some different lun setups on the netapp to increase spindle count, but I'm really not sure it will help in any way.
Does anyone have any experience with a similar setup? Perhaps changing settings in the qlogic driver conf, like frame size perhaps? How about any ideas to peg down the performance culprit (server, switch, storage)?
tia -
We are in the process of upgrading solaris 8 to 9 (Sun Sparc). When installing the patches (patch# 121430), we are getting an error message "patchadd 121430-10
Checking installed patches...
One or more patch packages included in
121430-10 are not installed on this system
Patchadd is terminating"
Can somebody help me with this? Its very urgent. I appreciate any help of yours
Regards,
VjWe are in the process of upgrading solaris 8 to 9
(Sun Sparc). When installing the patches (patch#What patches? You don't upgrade an OS by applying patches.
ckages included in
121430-10 are not installed on this systemRead this message. It's very clear. You are trying to apply a patch to something that is not there. Just ignore this message. -
New to Solaris, Some Samba and NTFS issues.
Hi Im new to solaris and trying out ZFS which has been great.
Im haivng some trouble that I cant find up to date info on so here goes:
First how do you mount an NTFS volume in Solaris 11 Express?
I need to access the data on an NTFS drive to populate my new ZFS tank.
Secondly, I have read only access on my samba shares from windows machines but my smb.conf looks right. a copy of my smb.conf will follow
Any suggestions would be appreciated.
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = share
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/samba/log/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
passdb backend = smbpasswd
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/sfw/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/sfw/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = no
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[Series]
comment = TV Series
path = /home/Kirby/Series
public = yes
only guest = yes
writable = yes
printable = no875739 wrote:
Hi Im new to solaris and trying out ZFS which has been great.
Im haivng some trouble that I cant find up to date info on so here goes:
First how do you mount an NTFS volume in Solaris 11 Express?
I need to access the data on an NTFS drive to populate my new ZFS tank.I never had a need for it but I think you'll have to compile fuse ntfs-3g manually.
http://web.archiveorange.com/archive/v/u46DbWSGcIzl7pexf4hQ
>
Secondly, I have read only access on my samba shares from windows machines but my smb.conf looks right. a copy of my smb.conf will follow
Any suggestions would be appreciated.You don't need to use Samba in Solaris 11 Express.
http://download.oracle.com/docs/cd/E19963-01/html/821-1448/gaynd.html#gayne -
Hi Guys.
We have a project done by some employees that ported it to Solaris, these guys are left the company (but we know the project compiled on Solaris for sure) and we cannot handle the complete compilation under Solaris 10. I will drop you the steps we made and the errors that were produced. Any idea how to succeed in this? Thanks.
tome@colo15 [~/mike/BETA8081]$ aclocal
/opt/sfw/share/aclocal/xmms.m4:17: warning: underquoted definition of XMMS_TEST_VERSION
run info '(automake)Extending aclocal'
or see http://sources.redhat.com/automake/automake.html#Extending%20aclocal
/opt/sfw/share/aclocal/xmms.m4:62: warning: underquoted definition of AM_PATH_XMMS
/opt/sfw/share/aclocal/xdelta.m4:7: warning: underquoted definition of AM_PATH_XDELTA
/opt/sfw/share/aclocal/vorbis.m4:9: warning: underquoted definition of XIPH_PATH_VORBIS
/opt/sfw/share/aclocal/sdl.m4:11: warning: underquoted definition of AM_PATH_SDL
/opt/sfw/share/aclocal/progtest.m4:13: warning: underquoted definition of AM_PATH_PROG_WITH_TEST
/opt/sfw/share/aclocal/ogg.m4:8: warning: underquoted definition of XIPH_PATH_OGG
/opt/sfw/share/aclocal/lcmessage.m4:11: warning: underquoted definition of AM_LC_MESSAGES
/opt/sfw/share/aclocal/imlib.m4:9: warning: underquoted definition of AM_PATH_IMLIB
/opt/sfw/share/aclocal/imlib.m4:167: warning: underquoted definition of AM_PATH_GDK_IMLIB
/opt/sfw/share/aclocal/gimpprint.m4:8: warning: underquoted definition of AM_PATH_GIMPPRINT
/opt/sfw/share/aclocal/gimp.m4:8: warning: underquoted definition of AM_PATH_GIMP
/opt/sfw/share/aclocal/gettext.m4:11: warning: underquoted definition of AM_WITH_NLS
/opt/sfw/share/aclocal/gettext.m4:196: warning: underquoted definition of AM_GNU_GETTEXT
/opt/sfw/share/aclocal/ao.m4:9: warning: underquoted definition of XIPH_PATH_AO
/usr/share/aclocal/vorbis.m4:9: warning: underquoted definition of XIPH_PATH_VORBIS
/usr/share/aclocal/vorbis-old.m4:9: warning: underquoted definition of AM_PATH_VORBIS
/usr/share/aclocal/pkg.m4:5: warning: underquoted definition of PKG_CHECK_MODULES
/usr/share/aclocal/ogg.m4:8: warning: underquoted definition of XIPH_PATH_OGG
/usr/share/aclocal/ogg-old.m4:8: warning: underquoted definition of AM_PATH_OGG
/usr/share/aclocal/esd.m4:10: warning: underquoted definition of AM_PATH_ESD
/usr/share/aclocal/esd.m4:175: warning: underquoted definition of AM_ESD_SUPPORTS_MULTIPLE_RECORD
/usr/share/aclocal/audiofile.m4:12: warning: underquoted definition of AM_PATH_AUDIOFILE
/usr/sfw/share/aclocal/gtk.m4:7: warning: underquoted definition of AM_PATH_GTK
/usr/sfw/share/aclocal/glib.m4:8: warning: underquoted definition of AM_PATH_GLIB
/usr/sfw/share/aclocal/gimpprint.m4:8: warning: underquoted definition of AM_PATH_GIMPPRINT
tome@colo15 [~/mike/BETA8081]$ autoconf
tome@colo15 [~/mike/BETA8081]$ automake
tome@colo15 [~/mike/BETA8081]$ ./configure
checking for a BSD-compatible install... /opt/sfw/bin//ginstall -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking build system type... i386-pc-solaris2.10
checking host system type... i386-pc-solaris2.10
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /opt/sfw/bin//gsed
checking for egrep... egrep
checking for ld used by gcc... /usr/ccs/bin/ld
checking if the linker (/usr/ccs/bin/ld) is GNU ld... no
checking for /usr/ccs/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/ccs/bin/nm -p
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... f77
checking whether we are using the GNU Fortran 77 compiler... no
checking whether f77 accepts -g... yes
checking the maximum length of command line arguments... 262144
checking command to parse /usr/ccs/bin/nm -p output from gcc object... ok
checking for objdir... .libs
checking for ar... false
checking for ranlib... :
checking for strip... :
checking if gcc static flag works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/ccs/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking dynamic linker characteristics... solaris2.10 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/ccs/bin/ld
checking if the linker (/usr/ccs/bin/ld) is GNU ld... no
checking whether the g++ linker (/usr/ccs/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/ccs/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... solaris2.10 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for f77 option to produce PIC... -fPIC
checking if f77 PIC flag -fPIC works... no
checking if f77 supports -c -o file.o... no
checking whether the f77 linker (/usr/ccs/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... f90: Warning: Option -print-search-dirs passed to ld, if ld is invoked, ignored otherwise
Usage: f90 [ options ] files. Use 'f90 -flags' for details
solaris2.10 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
tome@colo15 [~/mike/BETA8081]$ make
make all-recursive
make[1]: Entering directory `/home/tome/mike/BETA8081'
Making all in src
make[2]: Entering directory `/home/tome/mike/BETA8081/src'
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT wdog.o -MD -MP -MF ".deps/wdog.Tpo" -c -o wdog.o wdog.cpp; \
then mv -f ".deps/wdog.Tpo" ".deps/wdog.Po"; else rm -f ".deps/wdog.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT watchdog.o -MD -MP -MF ".deps/watchdog.Tpo" -c -o watchdog.o watchdog.cpp; \
then mv -f ".deps/watchdog.Tpo" ".deps/watchdog.Po"; else rm -f ".deps/watchdog.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT event.o -MD -MP -MF ".deps/event.Tpo" -c -o event.o event.cpp; \
then mv -f ".deps/event.Tpo" ".deps/event.Po"; else rm -f ".deps/event.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT eventfactory.o -MD -MP -MF ".deps/eventfactory.Tpo" -c -o eventfactory.o eventfactory.cpp; \
then mv -f ".deps/eventfactory.Tpo" ".deps/eventfactory.Po"; else rm -f ".deps/eventfactory.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT eventdecorator.o -MD -MP -MF ".deps/eventdecorator.Tpo" -c -o eventdecorator.o eventdecorator.cpp; \
then mv -f ".deps/eventdecorator.Tpo" ".deps/eventdecorator.Po"; else rm -f ".deps/eventdecorator.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT serverdownevent.o -MD -MP -MF ".deps/serverdownevent.Tpo" -c -o serverdownevent.o serverdownevent.cpp; \
then mv -f ".deps/serverdownevent.Tpo" ".deps/serverdownevent.Po"; else rm -f ".deps/serverdownevent.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT shutdownevent.o -MD -MP -MF ".deps/shutdownevent.Tpo" -c -o shutdownevent.o shutdownevent.cpp; \
then mv -f ".deps/shutdownevent.Tpo" ".deps/shutdownevent.Po"; else rm -f ".deps/shutdownevent.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT statusevent.o -MD -MP -MF ".deps/statusevent.Tpo" -c -o statusevent.o statusevent.cpp; \
then mv -f ".deps/statusevent.Tpo" ".deps/statusevent.Po"; else rm -f ".deps/statusevent.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT networkmanager.o -MD -MP -MF ".deps/networkmanager.Tpo" -c -o networkmanager.o networkmanager.cpp; \
then mv -f ".deps/networkmanager.Tpo" ".deps/networkmanager.Po"; else rm -f ".deps/networkmanager.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT ctextprocessor.o -MD -MP -MF ".deps/ctextprocessor.Tpo" -c -o ctextprocessor.o ctextprocessor.cpp; \
then mv -f ".deps/ctextprocessor.Tpo" ".deps/ctextprocessor.Po"; else rm -f ".deps/ctextprocessor.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT watchdogstatus.o -MD -MP -MF ".deps/watchdogstatus.Tpo" -c -o watchdogstatus.o watchdogstatus.cpp; \
then mv -f ".deps/watchdogstatus.Tpo" ".deps/watchdogstatus.Po"; else rm -f ".deps/watchdogstatus.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT cmlcriticalsection.o -MD -MP -MF ".deps/cmlcriticalsection.Tpo" -c -o cmlcriticalsection.o cmlcriticalsection.cpp; \
then mv -f ".deps/cmlcriticalsection.Tpo" ".deps/cmlcriticalsection.Po"; else rm -f ".deps/cmlcriticalsection.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT cmlsocket.o -MD -MP -MF ".deps/cmlsocket.Tpo" -c -o cmlsocket.o cmlsocket.cpp; \
then mv -f ".deps/cmlsocket.Tpo" ".deps/cmlsocket.Po"; else rm -f ".deps/cmlsocket.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT cutils.o -MD -MP -MF ".deps/cutils.Tpo" -c -o cutils.o cutils.cpp; \
then mv -f ".deps/cutils.Tpo" ".deps/cutils.Po"; else rm -f ".deps/cutils.Tpo"; exit 1; fi
/bin/sh ../libtool --mode=link g++ -g -O2 -o wdog -pthread -lnsl wdog.o watchdog.o event.o eventfactory.o eventdecorator.o serverdownevent.o shutdownevent.o statusevent.o networkmanager.o ctextprocessor.o watchdogstatus.o cmlcriticalsection.o cmlsocket.o cutils.o
mkdir .libs
g++ -g -O2 -o wdog -pthread wdog.o watchdog.o event.o eventfactory.o eventdecorator.o serverdownevent.o shutdownevent.o statusevent.o networkmanager.o ctextprocessor.o watchdogstatus.o cmlcriticalsection.o cmlsocket.o cutils.o -lnsl
g++: unrecognized option `-pthread'
Undefined first referenced
symbol in file
recv cmlsocket.o
send cmlsocket.o
__xnet_connect cmlsocket.o
__xnet_socket networkmanager.o
getsockname cmlsocket.o
accept networkmanager.o
listen networkmanager.o
setsockopt networkmanager.o
getpeername cmlsocket.o
__xnet_bind networkmanager.o
ld: fatal: Symbol referencing errors. No output written to wdog
collect2: ld returned 1 exit status
make[2]: *** [wdog] Error 1
make[2]: Leaving directory `/home/tome/mike/BETA8081/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/tome/mike/BETA8081'
make: *** [all] Error 2
tome@colo15 [~/mike/BETA8081]$ cd src
tome@colo15 [~/mike/BETA8081/src]$ /bin/sh ../libtool tag=CXX mode=link g++ -g -O2 -o wdog -D_REENTRANT -pthreads -m32 -lnsl wdog.o watchdog.o event.o eventfactory.o eventdecorator.o serverdownevent.o shutdownevent.o statusevent.o networkmanager.o ctextprocessor.o watchdogstatus.o cmlcriticalsection.o cmlsocket.o cutils.o
g++ -g -O2 -o wdog -D_REENTRANT -pthreads -m32 wdog.o watchdog.o event.o eventfactory.o eventdecorator.o serverdownevent.o shutdownevent.o statusevent.o networkmanager.o ctextprocessor.o watchdogstatus.o cmlcriticalsection.o cmlsocket.o cutils.o -lnsl
Undefined first referenced
symbol in file
recv cmlsocket.o
send cmlsocket.o
__xnet_connect cmlsocket.o
__xnet_socket networkmanager.o
getsockname cmlsocket.o
accept networkmanager.o
listen networkmanager.o
setsockopt networkmanager.o
getpeername cmlsocket.o
__xnet_bind networkmanager.o
ld: fatal: Symbol referencing errors. No output written to wdog
collect2: ld returned 1 exit status
tome@colo15 [~/mike/BETA8081/src]$errors that were produced. Any idea how to succeed in
this? Thanks.Hire someone who knows what they're doing! :-)
alan
tome@colo15 [~/mike/BETA8081]$ aclocal
/opt/sfw/share/aclocal/xmms.m4:17: warning:
underquoted definition of XMMS_TEST_VERSION
run info '(automake)Extending aclocal'
or see
http://sources.redhat.com/automake/automake.html#Exten
ding%20aclocal
/opt/sfw/share/aclocal/xmms.m4:62: warning:
underquoted definition of AM_PATH_XMMSThis part looks like someone is trying to setup autoconf to gen the Makefile
tome@colo15 [~/mike/BETA8081]$ ./configure
checking for a BSD-compatible install...
/opt/sfw/bin//ginstall -cthis part is running configure after autoconf
before this there were a lot of mv'ing around
/bin/sh ../libtool --mode=link g++ -g -O2 -o
wdog -pthread -lnsl wdog.o watchdog.o event.o
eventfactory.o eventdecorator.o serverdownevent.o
shutdownevent.o statusevent.o networkmanager.o
ctextprocessor.o watchdogstatus.o
cmlcriticalsection.o cmlsocket.o cutils.o
mkdir .libs
do you actually have the .o files so that there is something to link?
tome@colo15 [~/mike/BETA8081]$ cd src
tome@colo15 [~/mike/BETA8081/src]$ /bin/sh
../libtool tag=CXX mode=link g++ -g -O2 -o
wdog -D_REENTRANT -pthreads -m32 -lnsl wdog.o
watchdog.o event.o eventfactory.o eventdecorator.o
serverdownevent.o shutdownevent.o statusevent.o
networkmanager.o ctextprocessor.o watchdogstatus.o
cmlcriticalsection.o cmlsocket.o cutils.o
cd'ing to the directory to where the bad code is does nothing. :-)
Time to spend some money or do a lot of reading.
alan -
Compilation problem in solaris 10
Hi,
Iam using solaris 10 SUNW,UltraAX-i2. Iam trying to compile tripwire binaries tw_ASR_1.3.1_SRC. Iam using gcc 3.3.2, later I installed the libiconv package.
on reading the documentation from sunfreeware i modified the file mkheaders.conf putting the line SHELL=/bin/sh in the directory
usr/local/lib/gcc-lib/sparc-sun-solaris10/3.3.2/install-tools
The PATH and LD_LIBRAY_PATH are like this
# echo $PATH
/usr/local/bin:/etc:/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/ucb:/bin:/sbin/:/usr/sb
in:/usr/man:/usr/include/
# echo $LD_LIBRARY_PATH
/usr/local/lib:/usr/X/lib:/usr/lib:/usr/ucblib:/lib:/usr/ccs/lib:/etc/lib:/usr/d
t/lib
Once I changed the configuration changes in the tripwire source. Iam trying to compile make & make install. The output of the make is like this
# make
(cd util; make CC=gcc CFLAGS="-O" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh all)
### Ignore warnings about shift count negative/too large on line 36
gcc -O -ldl byteorder.c -o byteorder
byteorder.c: In function `main':
byteorder.c:36: warning: left shift count >= width of type
byteorder.c:25: warning: return type of `main' is not `int'
(./byteorder; cat ./ntohl.h) > ../include/byteorder.h
gcc -O -ldl types.c -o types
types.c: In function `main':
types.c:29: warning: return type of `main' is not `int'
/bin/sh ./types.sh "gcc -E" > ../include/inode.h
(cd src; make CC=gcc CFLAGS="-O" LIBS="" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh \
YACC="yacc" LEX="lex" all)
/bin/sh help.sh help.txt > help.c
gcc -O -c config.parse.c
gcc -O -c main.c
main.c:704:2: warning: no newline at end of file
gcc -O -c list.c
gcc -O -c ignorevec.c
gcc -O -c dbase.build.c
gcc -O -c utils.c
gcc -O -c preen.c
gcc -O -c preen.interp.c
gcc -O -c preen.report.c
gcc -O -c nullsig.c
gcc -O -c config.prim.c
gcc -O -c dbase.update.c
lex config.pre.l
mv lex.yy.c config.lex.c
yacc config.pre.y
sed 's/lex\.yy\.c/config.lex.c/' < y.tab.c > config.pre.c
rm y.tab.c
gcc -O -c config.pre.c
gcc -O -c help.c
(cd ../sigs/md5; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c md5.c
gcc -O -I. -I.. -c md5wrapper.c
(cd ../sigs/snefru; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c snefru.c
(cd ../sigs/crc32; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c crc32.c
(cd ../sigs/crc; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c crc.c
(cd ../sigs/md4; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c md4.c
gcc -O -I. -I.. -c md4wrapper.c
(cd ../sigs/md2; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c md2wrapper.c
gcc -O -I. -I.. -c md2.c
(cd ../sigs/sha; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c sha.c
gcc -O -I. -I.. -c shawrapper.c
(cd ../sigs/haval; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c haval.c
gcc -O -I. -I.. -c havalwrapper.c
gcc -O -ldl -o tripwire config.parse.o main.o list.o ignorevec.o dbase.build.o
utils.o preen.o preen.interp.o preen.report.o nullsig.o config.prim.o dbase.upd
ate.o config.pre.o help.o ../sigs/md5/md5wrapper.o ../sigs/md5/md5.o ../sigs/s
nefru/snefru.o ../sigs/crc32/crc32.o ../sigs/crc/crc.o ../sigs/md4/md4.o ../sigs
/md4/md4wrapper.o ../sigs/md2/md2.o ../sigs/md2/md2wrapper.o ../sigs/sha/sha.o .
./sigs/sha/shawrapper.o ../sigs/haval/haval.o ../sigs/haval/havalwrapper.o
gcc -O -ldl -o siggen siggen.c ../sigs/md5/md5wrapper.o ../sigs/md5/md5.o ../sig
s/snefru/snefru.o ../sigs/crc32/crc32.o ../sigs/crc/crc.o ../sigs/md4/md4.o ../s
igs/md4/md4wrapper.o ../sigs/md2/md2.o ../sigs/md2/md2wrapper.o ../sigs/sha/sha.
o ../sigs/sha/shawrapper.o ../sigs/haval/haval.o ../sigs/haval/havalwrapper.o
nullsig.o utils.o
I think it is not showing any problem. But when I try to make install it is throwing some
error like this. It was unable to find theinsta;; directory under /usr/local/bin. Manually I created the directory to test, it is throwing an error saying that bad file number.
Can any one help me what could be the reason for this.
# make install
(cd util; make CC=gcc CFLAGS="-O" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh all)
(cd src; make CC=gcc CFLAGS="-O" LIBS="" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh \
YACC="yacc" LEX="lex" all)
/usr/local/bin/install -d /usr/local/bin
sh: /usr/local/bin/install: not found
*** Error code 1
make: Fatal error: Command failed for target `install'
SanjeevThis forum is about using Sun Studio. Your question is about tripwire, which is not a Sun product, and gcc, which is not Sun Studio. I suggest you take your question to a tripwire forum. Check the location where you got tripwire for a support forum.
-
hello,
I have installed solaris 10 on intel machine.I can lock the screen if loged in as root,but if I login as non-root there is no option to lock the screen.What should I need to set to lock screen with non root user?
regards,
tanveerYou could try running kdmconfig again and selecting
an xfree86 driver from the bottom of the list for the
display card No it doesn't, when the X server used is Xorg (which is the default
with Solaris 10 b69 x86). Xorg ignores whatever you configure with
kdmconfig. -
When someone tries to login to a SOLARIS 10 server via SSH in PuTTY the details are limited to the following:
login as: testacct
Using keyboard-interactive authentication.
Password:
Using keyboard-interactive authentication.
New Password:
Using keyboard-interactive authentication.
Re-enter new Password:
Access denied
Using keyboard-interactive authentication.
Password:
Using keyboard-interactive authentication.
New Password:
Using keyboard-interactive authentication.
Re-enter new Password:
I don't know if this is a feature of PuTTY or Solaris 10 that is disabled but what I would expect to see above are messages such as:
Warning: Your password has expired, please change it now.
or
The first 8 characters of the password must contain at least 1 numeric or special character(s).
(depending on your /etc/default/passwd)
Where is this information being suppressed? I am looking to enable that extra information so when, for example, "Access Denied" appears, the user has some clue as to why and can take corrective action to properly login.
Thanks.
PS- I ran ssh -vvv user@host and saw that the "extra info" above was being generated, but it's not making it over to the PuTTY client side.
Edited by: dubitancy on Dec 12, 2008 9:37 AMjanp2 wrote:
I hit this issue right now so I'm pasting a part of my reply to another list.
It might help other people:
==
The "Warning: Your password has expired, please change it now." comes in a
separate SSH_MSG_USERAUTH_INFO_REQUEST packet. This packet in general has an
"instructions" field, and some "prompt" fields. SunSSH server sends the warning
in a separate info-request packet, with 0 prompts, and with the warning message
in the instruction field. That's fine according to the spec (rfc 4256):
The num-prompts field may be `0', in which case there will be no
prompt/echo fields in the message, but the client SHOULD still
display the name and instruction fields (as described below).
however, when the number of prompts is 0, putty ignores the instruction field.
SunSSH client does the right thing, OpenSSH client as well. In theory, we could
put the warning message in the next info-request packet together with the "New
Password" prompt but that decision was intentional, we would be really "fixing"
stuff to workaround problems somewhere else.
so, my conclusion is that they should file a bug againt those SSH clients they
use. It's not a problem in the SunSSH server at all.
==
BTW, the putty's file is ssh.c, the instruction field is set on line 7474:
s->cur_prompt->instruction = ...
but add_prompt() function that prints the stuff out is called inside of the
following loop:
for (i = 0; i < s->num_prompts; i++)
so, as we can see, if the number of prompts is 0, we get no instruction
field printed.
Jan.Thank you very much, Jan. That was very helpful - at least now I have confirmation.
Update: I contacted the dev team for PuTTY and they let me know that this bug has been fixed in the latest Development version of PuTTY but there isn't a firm release date planned. Anyway, it'll be fixed in the next release of PuTTY
Edited by: dubitancy on Jan 7, 2010 6:33 AM
Maybe you are looking for
-
Hi All, I am using reports 6i. I designed a master/detail report with style group above. Its working fine. But I need every master record has to start from a new page. But now First master record with its details ends at page no 8 and second master r
-
Satellite L855-14G - Devices are not detected in device manager
I've reinstalled my Satellite L855/L855D (installed windows 7 instead of win 8) . And there is a problem : many devices are not found , like ethernet / wireless. Video card Radeon HD 7670M also not found. I can't install drivers, the errors apears th
-
Set user password auto expired in ACS Server
Hi, Is the ACS has a function for me to configure in ACS Server to set the users' password will be expired in a period of time(e.g. 90 days)? Thanks and regards Ernest
-
I am having intermittent usb problems for no apparent reason my usb mouse stops working until i unplug and replug it back into the board i am on bios ver 5.7 anyone have any ideas how to fix this?
-
Hi there, I found out, that iViews based on different layout sets show the hover menu in different ways - once with small up/down buttons and once without arrows and less space between the rows. Where can I configure which hover menu style is to be u