Patching in with guitar to an existing track.

I'm recording a guitar track and while playing I mess up on a certain part. Is there a way to patch in to the existing track or do I have to create a new track and blend them together?

You mean punch in, right? ;-)
GB doesn't have that option, the way with the new track that you outline is the best way to achieve it. You can afterwards edit and join the regions on the old track.

Similar Messages

Complete my album downloads the missing tracks but then does not place it with the existing tracks in iTunes. i have a single song bought sat on its own and an album with a track missing, any ideas?

complete my album downloads the missing tracks but then does not place it with the existing tracks in iTunes. i have a single song bought sat on its own and an album with a track missing, any ideas?

I had this same problem and started a thread, but for the most part nobody responded and those who did somehow didn't understand what the problem was.
http://discussions.apple.com/message.jspa?messageID=11504935#11504935
I'm sure the problem is sweat getting into the apple supplied headphone "remote." Basically even the smallest drop can slide down the wire and get into the unit.
Unfortunately I haven't found a solution other than to get a Belkin remote adapter and some sport headphones. This doesn't give you voice over, but you can still control the volume, skip, etc.
I've been doing this for a couple weeks now and it hasn't had a freak out since.

EM - Delete Existing Tracking ID and add New Tracking ID

Hello Everyone
I am working on u201CDual Tracking IDu201D issue for EM Project.
Issue: Current design, when Users change Tracking ID (Inbound Delivery Bill of Lading #), In Event Management, we have both Old and New Tracking ID (YTRACK_NO).
Solution: Users / Business Requested to Update Existing Tracking ID (YTRACK_NO) in EM. Anytime in EM, we will have only NEW value of YTRACK_NO.
For the same, I modified FM in ECC and Config (Rules) in EM.
Added Tracking References in Event Message FM whenever there is change in Tracking No.
Replace Existing Tracking ID YTRACK_NO with new Value
      ls_trackreferences-evtcnt   = lv_evtcnt.
      ls_trackreferences-refcod   = 'YTRACK_NO'.
      ls_trackreferences-refid    = <ls_xlikp>-bolnr.
      ls_trackreferences-refusage = 'T'.
      ls_trackreferences-action   = 'A'.
      APPEND ls_trackreferences TO lt_trackreferences.
Configuration / Rules in EM:
For YIDN_CHANGED_TRAC Activity:
Iu2019ve added Task12 u2013 Delete Tracking u2013 Activity TRACKING_ID_REMOVE
TASK 15 u2013 Added Tracking ID u2013 Activity TRACKING_ID_SET
Once the FM and Config is completed,
When I change Existing Inbound Delivery BOL #, I see TRACKING ID (YTRACK_NO) is deleted from Tracking ID Tab for Inbound Delivery EH but new Tracking ID (YTRACK_NO) is not added either.
I checked SLG1 ( logs) and I see Activity is Triggered and RC = 0. Donu2019t see any errors either.
I see entry in /saptrx/evm_ref ( New Tracking ID) table.
Any thoughts?
Any help is appreciated.
PS:
u2022     Once the Event Messages is posted, If I do Reprocess Event Messages (Manually), interestingly New Tracking ID is getting added to EH.
u2022     Also if post Event Messages through BADI (/SAPTRX/BAPI_EH_ADDEVENTMSG_02) in EM (manually) , it works Perfectly (Deletes and Adds new Tracking ID)

you sign in on apple website and then you can add or remove any account..

Question about using Logic with guitar on stage. HELP!

Hello,
I'm a guitarist.
I would need some advises about using Logic in a live situation..
How do you move from one track to the other using the keyboard?
Could that action be controlled by some kind of footswitch?
Also, the REC button has to be always ON to hear the sound or is there another way to set that up?
I would like to create let's say 6 tracks with plugins for having 6 different guitar sounds.
Is it very heavy for the CPU?
I'm using a macbook with 2GB of ram and a firewire FA-66 edirol sound card.
Would you also recommend to use a preamp?
Many many thanks for your help!
Ciao
Chester
MacBook, Powerbook 17", iPod 4G, LaCie HD Mac OS X (10.4.8)

Why to jump from one track to another?
Simply create a folder with all the Channel strip settings and assign two key commands of your choice to navigate forward and backward.
And yes, you can assign that command to a MIDI controller (or pedal) too.
About monitoring have a look at the reference manual page 211.
Before to buy a preamp try using the Hi-Z input from your Edirol.
Anyway, six tracks with six plugins on each track are not an issue for your macbook.
cheers
rob
Power Mac G4/533 PowerBook 12 Mac OS X (10.4.8)

Can't save the configuration of an existing track

Hi,
i have created a track before define a product,sc... and it OK. i know it's wrong step, so after defined a product,sc and etc follow the NWDI Configuration document, i try to delete(modified to save) the existing track,The following error message is displayed:
Unexpected error; inform your system administrator: <null>
I got a solution in SAP notes as following:
The following error message is displayed when you save the configuration of an existing track:
Unexpected error;inform your system administrator: For input string: " "
Other terms
Data conversion, NWDI, CMS, Change Management Service
Reason and Prerequisites
" " default values for new fields in CMS were inadvertently delivered for new fields in CMS.
Solution
Execute the following SQL statements on the database of your J2EE application server:
UPDATE cms_cdevconf SET DTCVERSION = null WHERE DTCVERSION = ' '
UPDATE cms_cdevconf SET DTCPATH = null WHERE DTCPATH = ' '
The problem has only occurred previously on ORACLE.
I executed the sql sentence through VA, but it's not work.
Any input is thoroughly appreciated.
With Regards,
Lin

Someone?
Any help is appreciation...
Regards, Lin
Edited by: BingLin Zhong on Sep 2, 2008 4:46 AM

X-FI Xtreme Audio (OEM) problems with Guitar Po

Hey all, I just upgraded from a SB Li've 5. Sound card to an X-FI Xtreme Audio Card and am now having problems with guitar port. There seems to be a delay or lag time from playing to actually hearing the sound. It sounds like its about half a second or so which makes it really annoying for trying to play. Is there a remedy for this or is there something wrong with the card/drivers?Also, is Line in and Mic levels no longer in the windows volume?playback control?

jutapa wrote:
frubsen wrote:
Hey all, I just upgraded from a SB Li've 5. Sound card to an X-FI Xtreme Audio Card and am now having problems with guitar port. There seems to be a delay or lag time from playing to actually hearing the sound. It sounds like its about half a second or so which makes it really annoying for trying to play. Is there a remedy for this or is there something wrong with the card/drivers?Also, is Line in and Mic levels no longer in the windows volume playback control?
You should be able to control I/Os through Windows mixer(s) and Creative Control Panel (comes with the driver package). If you like to install those software intend for X-Fi you need to download the CD image from BadBoys site (if he still has the site up an running). You get those mixers showing up either through panel which pops up when you enter mmsys.cpl in start->run... prompt (Audio tab, Volume buttons). Individual mixer panels can be called with commands sndvol32 (play) and sndvol32 /r (recording). The lag you have there is normally called as latency. You get rid of it by using ASIO driver mode with 2 - 0ms latency settings. You can set the latency through ASIO controlpanel. If the guitarport has an ASIO driver it's own, use it's control panel or try with asio4all driver (http://www.asio4all.com).jutapaMessage Edited by jutapa on 0-9-20080:0 PM
Is this a standalone driver? Or is it something used in addition to an existing sound driver? I'm having a similar problem with my mic, there is a delay (and it has to be turned up really loud to be heard, although that may be a different problem) and I'm looking for a solution.

Recording over existing tracks w/ Audition to make sure timing is correct

A problem I have consistently is keeping the right timing for tracks when I am importing previously recorded tracks into a new session of a song. To get around this previously in older editions of Adobe Audition, I would record whole blank tracks that corresponded to the duration of the instrumental track. I would then simply record over the blank tracks. Thus, even if the computer crashed or I switched to a new session, it would be easy to maintain the appropriate timing of vocals, because everything had the same duration and start time.
However, with the current edition of Adobe Audition, when you try to record over a pre-existing track in multitrack view, it creates a new block instead of recording over the old block. What do I do to solve my original problem, or how can I record over existing blocks without having new blocks show up?
I hope this makes sense. Please help.

I finally found the solution on page 317 of the manual. Under Options in the top menu choose "auto input monitoring." Isn't that obvious when every other input/ouput control is in the Arrange and Mixer screens? Oh, well, now it works very well, great sound and no tracks overlaying.

Trouble with guitar amp pro

I am completely new to Logic Pro 7 and am having trouble trying to figure out how to even bring up any sort of guitar amp pro menu (I don't know anything about guitar amp pro either, other than that it is cool)? Currently, I am connecting my guitar to my MBP with the M-Audio fastrack and playing through garageband. Would anyone mind explaining to me who to get started with guitar amp pro, whether it is compatible with fast track, etc. I have logic pro 7.0.1.

Guitar amp pro (GAP) is a plug in that you assign to an audio track
Plug your guitar into your audio interface
choose and audio track
assign the input to what ever input your guitar is connected to
make sure its outputs are assigned to whatever speakers you are monitoring with
record enable that track
at this point you should hear your guitar
now at the top of the channel strip for that track there are inserts
click and hold on one of the insert buttons to expose the menu
under "distortion" is where you will find GAP, choose it and the user interface will open.
you can choose presets from the menu at the top left to experiment with the factory sounds
Hope this will get you started
Don

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

Look at it this way: there is no need to record that effect onto the audiofile. This is a great advantage of modern recording, and this is how most DAW's work by default. Just leave the plugin on when playing back.
Only for CPU management reasons it may be advantageous in certain situations to either freeze a track or bounce it in place (both techniques will render an audiofile that may include the effect). But in general it is a (very) good thing that it is possible to tweak any effect after recording, and have a clean, unprocessed recorded signal to work with. And if the effect was perfect at the time of recording, well, just leave the plugin(s) engaged.
http://help.apple.com/logicpro/mac/10.1/#/lgcp8ae5826e
http://help.apple.com/logicpro/mac/10.1/#/lgcpf1cbfd51
ps: there is a way to record plugin effected signal live into the audiofile, but it involves creating a custom environment setup.

Problem with copying to external drives 10.8.3 "the operation can't be completed because an item with the name .ds_store exists"

After upgrading from 10.7.5 to 10.8.3 I cannot copy certain folders to any external drive. the operation can't be completed because an item with the name .ds_store exists. I have seen this problem in discussions for many years with no real solution. Does anyone have a resolution? Please help. This is very frustrating as I work in two locations and copy folders back in forth all the time.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Logic Pro X - How do I record my voice over existing tracks (via a mike and audio interface) without hearing those tracks on the speaker. I have headphones plugged into the interface but it doesn't stop in coming out of the speakers?

I'm new to Logic Pro X and can't work out how to record my voice over existing tracks without them playing over the speaker. I'm using a Sure mike through an audio interface and have headphones plugged into the interface?

Hi Kevin, what kind of audio interface do you have?

Patch names with multiple lines

I am using patch names with multiple lines, e. g.:
Intro: In my car
Piano / Brass
Theese patch names appear correctly in the patch list in edit mode, but completely disrupted in perform mode (the two lines are displayed vertically centered, son one can see the lower half of the upper line, and the upper half of the lower l

I wrote my question here because I didn't find a MainStage forum?! Do you have a link?
Best, Dietmar

How to know if implementation with a filter value exist for a BAdI in code?

Hi all,
Scenario:
I created a BAdI. There will be a button on the UI to call its implementation(s); while if there is no implementation with specified filter value, this button needs to be hidden. Thus I need to know if the implementation exist before calling it.
Question:
In the ABAP code, how to get whether implementation with specified filter value exists for a BAdI?
If it's possible, please help provide code.
Thanks and regards,
Said

Problem solved:
data: r_badi type ref to YOUR_BADI,
          badi_impl_num type i.
get badi r_badi
    filters
      flt_name = fit_val.
badi_impl_num = cl_badi_query=>number_of_implementations( badi = r_badi ).
if badi_impl_num > 0.
    "there are badi implementation(s)
endif.

Spotlight/Finder can't find a file, yet when I search the timecapsule for they find it. If I try to restore the file I get "file with that name already exists...." What is wrong?

I was trying to find a file (iTunes Backup). When using finder/Spotlight they couldn't find the file.
I then opened up my timecapsule and searched for the file....tick-a-de-da it found it in yesterdays backup. I attempted to restore the file and got the prompt "A file with that name already exists in this location, would you like to keep both, replace the file or cancel the request.
So if the file is there why can't spotlight/finder find the file??
If it helps I get this from the terminal when checking if indexing was enabled.
$ mdutil -s -a
Indexing enabled.
/Volumes/Data:
2014-11-18 18:09:39.542 mdutil[1472:572531] Metadata.framework [Error]: mdsCopyStoreAttributes failed: (8) (os/kern) no access
No index.
/Volumes/Time Machine Backups:
Indexing and searching disabled.
/Volumes/Time Machine Backups/Backups.backupdb:
Indexing enabled.

Hi Danielle,
Is there any possibilty that some of your files (a VI or DLL?) have been moved, renamed, or deleted? Also, what version of LabVIEW are you using and are you using any .NET DLLs? Another option to consider would involve VISA or DAQmx property nodes. Are you using any of these property nodes in your code? Here is a KnowledgeBase article to describe more about the VISA and DAQmx property nodes in a source distribution:
Error Creating Source Distributions Involving rc Files: http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C?OpenDocument
I hope this is able to help.
Anna L
Applications Engineer
National Instruments

A key/value pair with this key already exists in the store

Hi all,
In the installation of PI components on the AS ABAP+ AS JAVA with finalization of the Java Addin the iam facing this problem :
In short it mentioning that the " A key/value pair with this key already exists in the store.", Please see below for more information....:
CJSlibModule::writeWarning_impl()
Execution of the command "/opt/java1.4/bin/java -classpath
/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedli
b/launcher.jar -Xmx256m -d64 com.sap.engine.offline.OfflineToolStart
com.sap.security.core.server.secstorefs.SecStoreFS
/usr/sap/PID/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/PID/SYS/global/security/lib
/tools/iaik_jsse.jar:/usr/sap/PID/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/PID/
SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/PID/SYS/global/security/lib/tools/w3c_ht
tp.jar:/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/l
ib:/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/share
dlib:/oracle/client/10x_64/instantclient/ojdbc14.jar insert -s PID -f
/usr/sap/PID/SYS/global/security/data/SecStore.properties -k
/usr/sap/PID/SYS/global/security/data/SecStore.key admin/host/PID tern" finished with return
code 2. Output:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store.
ERROR      2007-02-15 18:35:29
           CJSlibModule::writeError_impl()
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log
file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
ERROR      2007-02-15 18:35:29 [iaxxgenimp.cpp:731]
           showDialog()
FCO-00011 The step insertAdminDataInSecStore with step key
|NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Configure
_Java|ind|ind|ind|ind|4|0|insertAdminDataInSecStore was executed with status ERROR

Hi Kamalakar
I think this problem happens due to wrong content of SDMKIT.JAR - incorrect crypto SDA is deployed.I dont know the installation procedure you followed because normally this error wont come.
I would rather suggest a work around seeing your problem
<b>Edit the keydb.xml exchanging [ERROR] with [OK]</b>
Follow the above step and restart your installation.
Do not forget to reward points:

Patching in with guitar to an existing track.

Similar Messages

Maybe you are looking for