Path in Classpath for file SapMetamodelWebdynproContent.zip not found.

How to get rid of these warnings?
               [Warning]: Path in Classpath for file SapMetamodelWebdynproContent.zip not found.
Warning               [Warning]: Version for file SapMetamodelWebdynproContent.zip not found.
Warning               [Warning]: Versions of 'SapDictionaryTypeServices.jar' have different prefix.
Warning               [Warning]: Versions of 'SapDictionaryTypesRuntime.jar' have different prefix.
thanks in advance.

Hi,
This is a common problem when you import projects to NWDS. Do like this.
1.Change to Navigator tab in NWDS and delete gen_wdp folder.
2.Switch to Web Dynpro Explorer. Select the Project -> Right click-> Select properties -> in the wizard select Java Build Path -> Select Libraries tab -> You will find jar files with warnings
3.Remove the jar and add the jar file with same name to the project one by one.
4.For each jar file repeat step 3.
5.Save the project
Or
removed the read-only property from all folders / files of the project and it solved my problem.
Hope this helps!!
Thanks & Regards
Vijay K

Similar Messages

Path or file name "java" not found error

I am getting the error, path or file name "java" not found, when I type in sqlj -version.
I am using a NT server and I have added the CLASSPATH and path to it.
Does anyone have any ideas.

What version of SQLJ are you using? What do you see when you type
java
or
java -version
on the command line?

Problem in setting path and classpath for java in RedHat linux 9

Hi ,
i am not able to set the PATH and CLASSPATH for j2sdk1.4.2_06
I have tried with export PATH=$PATH:/usr/j2sdk1.4.2_06/bin
and export CLASSPATH=$CLASSPATH:/usr/j2sdk1.4.2_06/lib
in terminal
but i want to configure it as permenant way for the jre and jdk
and we should only type java or javac according to the requirement
regards mihir...

type those in .bashrc ... save and exit
then at prompt, type 'source .bashrc'
this is the permanent solution ...
bhalo thakun

Finder Searches for Files That Do NOT Contain Certain Words

Is it possible to do a search in the Finder for files that do NOT contain a certain word?

As far as I know you can't do that. It would be lovely to pipe the results of one search into another....
What happens is if you specify a type folder, then exclude a file system name, the command excludes folders that have the word in their name.
You may want to take a look at this:
http://developer.apple.com/documentation/Carbon/Conceptual/SpotlightQuery/index. html
See the section on "Query Expression Syntax" and the one on "Spotlight Metadata Attributes Reference" (click link, then click the link in the Introduction to the section). Most the other stuff is of interest mainly to programmers, but those two sections are actually useful to regular folks.
Francine
Francine
Schwieder

Sumtotal error 404 - file or directory not found

Hi,
We have a SCORM 1.2 compliant content created using Captivate 5. It's a multiple SCO (6 modules) combined into a single SCORM package. When the package was loaded in Sumtotal LMS, one of the modules alone does not launch and throws the below error.
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.
However all the modules get loaded when tested in Saba LMS. Any ideas on what could the issue in Sumtotal? Would greatly appreciate a resolution at the earliest.
Thanks,
Sudarsan

r_sudarsan,
I 've seen that error 404 numerous times in the past. It always seems to be related to the configuration of the web server not able to match the Domain name with the IP address, wrong path name, check the spelling, browser startup default settings to locate the website. etc. It always seems to be a configuration problem.
Good Luck.

Breadcumbs don't work online: '404 - File or directory not found'

Breadcrumbs all work fine when testing my AirHelp application offline on my Windows 7 pc, (or if I access it as online browser based help). However, when I try to test the online Airhelp most of the breadcrumbs return a '404 - File or directory not found' error.
My RoboHelp Project has been created as follows:
1. There is a homepage created inside of RoboHelp
2. Then I have linked a number of framemaker books, for each of which the FM table of contents is being converted to create a new associated TOC.
3. In the master TOC I have added a New TOC Book for each framemaker book (making it a book with a link to a htm), under the New TOC Book I have inserted a TOC placeholder for the appropriate associated TOC.
When the Online AirHelp version is run, the breadcrumbs can only be used to navigate to the homepage and to the New TOC Books at the level immediately beneath the home page. The links to these pages seem to make sense, being of the form:
Breadcrumb
Link
Home
event:homepage.htm
Home/User Guide
event:../../../User_Guide.htm
Where it goes wrong is for the breadcrumbs futher down the path which have links similar to those shown below:
Breadcrumb
Link
Home/User Guide/Introduction
event:introduction.htm
Home/Handbook/Sign_Conventions
event:Sign_Conventions.htm
In both of the above the URL request that is being passed to the online server is not the full path, (it seems to be a relative path?) Is this the reason why the breadcrumbs don't work, and if so can you suggest what I need to do to get them working?
I am up against a deadline, and at the moment the only way forward I have is to abandon the converted Framemaker TOCs and have RoboHelp autocreate a TOC for the whole project for me, however this is not a practical solution because the folder structure is not the same when I do this and would require a great deal of manual editing each time it is rebuilt.
Hoping somebody out there can please assist?
Thanks.

Thanks TP,
I have many public IP's available. Do I need to install the RD Web access role on the DMZ server that has the RD Gateway role even if i have spare public IP's available?
I've basically have this setup "3.1. RD Gateway without AD DS in perimeter network deployment:"
On the below link
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
currently there's an CNAME record in DNS for remote.external.com which points to Server3.internal.pri
which holds the RD
Connection Broker, RD Licensing and RD Web Access roles
Are you saying to create an A record and point it to Server3.internal.pri
internal IP? I'm not getting certificate errors (yet) so do i have to run the script? i ask this as the error message i'm getting (404 - File or directory not found) doesn't seem to be related to certificates, i'm making changes to a production environment
so i have to be extra carefull!
Cheers!

Record drive/partition "Audio Files /Audio Recording" not found!

HAAAAAAAAAA !!!!!! I get this message every time I want to record audio !!!!!
Record drive/partition "Audio Files /Audio Recording" not found!

myrna wrote:
Any idea what path blogger Jim Frazier uses? BTY, only the audio portion does not record; the >instruments record just fine. If this is indeed a bug, is there a workaround that will get me recording >until a fix is found...
I actually have not had this happen to me in several months, and in fact, haven't even thought about it in a while.
But back when it would happen, I would be working away, recording audio without any problems, and then I'd hit record again for something, and out of nowhere, get a message like this:
"olumes/Audio Drive/Album Projects/John Doe/Song title/Audio Files" not found.
When the first word should have been "Volumes".
So I would click and hold the record button to get to reset my audio pathway, and the proper path would already be listed. I would then merely click the "Set" button, and be back in business.
And there were even a handful of times when I would get that message with the full name listed, the V was there in "Volumes', and everything listed correctly, and going to the record settings, everything was set properly. But I'd still have to hit "Set" to remind Logic where the pathway was pointed to.
Definitely a bug.
But... this bug never happened to me in Logic 7. It was only since installing and using Logic 8, that it occurred. And as I mentioned, it now hasn't happened in months.

Ver.9.5 The volume for file name cannot be found

HI,
My work Mac Book pro was recently upgraded to Mavericks from 10.6.8, with iPhoto 11 (ver. 9.5) also an included upgrade. One album of photos is no longer accesible - clicking on each thumbnail provokes the following window "The volume for <file name> cannot be found. The "Try again" option doesn't work, and the alternative, which is to use the finder to locate the file is useless, as the files are buried in a library spare bundle. When I copy the file name, and search on the volume with the library via finder, it pulls up tiny thumbnail size files.
I have a primary iphoto library on a dedicated USB external drive, which I back up not everytime I update the library (200 gbs spare bundle over USB2!), but regularly. I fear these recently imported files, have not been backed up before up erasing cards, and upgrading system OS, have gone.
Is there any way of getting into the library via finder, or elsewhere in iphoto to refind the original master files which are in there somewhere? These files opened perfectly in iphoto before the recent upgrade.

Thanks for the fast response. I've followed your directions and can't find the file in there, in Masters, Originals, or Modified folders. I found files in Thumbnails folder though. Some of the files from the same event are fine, so its not consistent. I'm also noticing that another file in the event has a totally blurred preview (Its a 24mbs Jpg from a Nikon D800) - not sure if this is at all connected.
The positive news is that my NeoFinder database of drives indicates I should have the 'missing' files on another computer in the office, but I'm still scratching my head on this.

Error 48: File or folder not found when using photomerge panorama - imac photoshop elements 10

Any help is appreciated. Followed the photomerge panorama instructions and got error 48: file or folder not found.....line 16 ...
using photoshop elements 10 on imac with OSX 10.8.2
Thx

Have you recently updated your Operating system? Please try repairing permissions for your hard disk.
Please check the help document to know more about repairing permissions http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html#main_Solutio n_3__Repair_Disk_Permissions

A valid provisioning profile for this executable was not found

I have built an enterprise APP. It has been installed in hundreds of machine. It can run smoothly at the begining. After two months, a few of the machice cannot open the APP anymore. I have tried to read its crach log and it has nothing. Finally, i found out the reason by tracing the console log.
The error is "A valid provisioning profile for this executable was not found".
So I check if the file exist but it is disappeared. The user have not removed the profile.
At last, I tried to install the profile again, it is still not working even the profile is installed. Is there anyone who have the same issue? Thank you very much
Message was edited by: Ben125

Sorry that I have made a mistake. A wrong profile is installed.
Thanks

Oracle.forms.webutil.file Transfer.File Transfer bean not found

I've followed tons of instructions for 2 days to install and configure webutil and I finally have success with the demo. However, when I add this to my own form and use the CLIENT_IMAGE.READ_FILE_IMAGE
I end up with error oracle.forms.webutil.file Transfer.File Transfer bean not found WEBUTIL_FILE_TRANSFER.getMaxTransfer will not work.
What am I missing? Thanks for any help.

Make sure your form subclasses object group webutil.olb, and that webutil.pll is also attached. Make sure that your forms folder contains webutil.plx (a compiled version of webutil.pll). Unless the default config (in formsweb.cfg) includes the entries required for webutil support, you must specify a config that does have these entries. 10g, which comes configured for webutil, provides a config called webutil for this. An example URL might look like:
http://myappserver/forms/frmservlet?form=myform.fmx&config=webutil
There could be other problems, but since you're able to run the demo forms, I'm guessing that what I've mentioned are the first things for you to check.
Hope this helps,
Eric Adamson
Lansing, Michigan

Oracle.forms.webutil.file.filefunction bean not found

hi
i am using this code
declare
fname varchar2(200) ;
begin
fname := client_get_file_name(null,null,null,null,open_file,true) ;
CLIENT_IMAGE.READ_IMAGE_FILE (fname,'any','Img');
end ;
forms is running fine but when we press the button to open dialog for image file an error has been generated as under
oracle.forms.webutil.file.filefunction bean not found.
WEBUTIL_FILE.FILE_SELECTION_DIALOG_INT will not work
i think some think is missing in configuraion file need help on urgent basis
take care
Qaiser Hassan Awan

I faced the same problem, I think the frmwebutil.jar could not be downloaded to you client machine, so I modified the archive_jini to be as follows
archive_jini=frmall_jinit.jar,frmwebutil.jar,jacob.jar
assuming that frmwebutil.jar,jacob.jar are located in folder on your ORACLE_HOME/forms/java
don't know exactly why but I think the
WebUtilArchive=frmwebutil.jar,jacob.jar
could not be seen, so I had to put it in the archive_jini parameter
good luck

LSO Content Player Error - HTTP Error 404 - File or directory not found

Hi All
Please could you assist.
I have published a course to my ISS CMS and configured the links in both ECC and J2EE lsm/mediator.
Result
Username='username', SystemName='HRD', Client='030', Host='22.22.22.22', Language='EN', SystemNumber='00', EnablePoolSharing='true', MaxConnection=50, AbapDebug=false:
CPCFG.RSURL = http://iiscmshost.domain/LSO600/Content/
CPCFG.REPUS = username
ServerURL=http://iiscmshost.domain/LSO600/Content/ ok!
I was able to successfully publish the course from the Authoring Environment to the CMS server.
When selecting the starting the course from the portal with content player i get the following error.
HTTP Error 404 - File or directory not found
But the URL is referring to - http://iiscmshost.domain/lms/mediator/courseview?sid=8685627505550088697845288091101&language=EN&sys=HRD&client=030&sap-accessibility=X
How does directory http://iiscmshost.domain/lms/mediator get created when the content is in http://iiscmshost.domain/LSO600/Content ??
Secondly can I change this reference to my LSO600/Content directory.
Please advise with any information. Point will be awarded.
Regards
Maahir

Dear Maahir,
We are facing the same problem. We are pointing over CMS to IIS, instead of KM content of portal. We are successfully able to release and publish the course, then attach to a course participant also.
But. When participants logs into the portal and click on Start Now. It giving 404 file not found Error. Its the same error. All our Course and content pointed to CMS IIS Server Url.
When we did the content player config test, result is NOT OK. We have required R3 authorization and CMS user authorization also with admin rights. Content Player console is working in AE when we start up the course. Its showing the error.
So, it seems like content player is not working properly. Bcoz we are launching course from http://WEBDAV repository server maintained in back end system. Which is the IIS(CMS Server)for us. Do we need to maintain anything separately to launch a course from IIS Server on R3 and SAP Portal. Below sample URL from page.
http://Sever:port/lms/mediator/courseview = xxxxxxxxxxxxxxx
Could you please us know, how did you resolve the issue and tell me the cause of this issue.
Thanks and Regards
Obli

Header file 'dlfcn.h' not found

Hi,
I am trying to compile some dynamic library stuff in my application. I am getting the error "header file 'dlfcn.h' not found". I searched for the file dlfcn.h in directory "/usr/include" and "/usr/local/include" but unable to find the file.
Please help me how to download this file?
Thanks

Hi header file........................etc
You could make your own.
Script is here;
http://www.koders.com/c/fid7E0BB9E61334ACD4F547A739488E20E0F68C502E.aspx
Just leave out the line numbers at the start of each line.
regards roam

"Settings for material number conversion not found" occurs when ...

After I run an initial load data into the InfoCube 0PUR_C01, I want to check the InfoCube Content by the following path:
RSA1 -> pick up the InfoCube 0PUR_C01, right click it and select Manage -> Get to Content tab -> Click InfoCube Content button -> Deselect all selection, only tick the 1st column checkbox next to 0Material, then hit enter, get a small window titled as "Cancel" with a red STOP msg sysing "Settings for material number conversion not found" with an "Exit" button and a question mark button, click Exit button leads to SAP Easy Access screen, if clicking the question mark button, another window pops up with the msg showed above, click Technical Information button causes the original window short dump and the short dump msg shows below in between two dashed lines:
Runtime Errors         RPERF_ILLEGAL_STATEMENT
Date and Time          11/28/2005 14:43:13
ShrtText
    Statement "CALL SCREEN" is not allowed in this form.
What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLSHL2" had to be terminated because on
    statements could not be executed.
    This is probably due to an error in the ABAP program.
Error analysis
    There is probably an error in the program
    "SAPLSHL2".
    The program was probably called in a conversion exit
    or in a field exit. These are implemented by
    function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or
    USER_EXIT_xxxxx_INPUT.
    Conversion exits are triggered during screen field transports or
    WRITE statements, field exits during field transports from the
    screen to the ABAP/4 program.
    In this connection, the following ABAP/4 statements are not allowed:
    - CALL SCREEN
    - CALL DIALOG
    - CALL TRANSACTION
    - SUBMIT
    - MESSAGE W... and MESSAGE I...
    - COMMIT WORK, ROLLBACK WORK
    - COMMUNICATION RECEIVE
    - STOP
    - REJECT
    - EXIT FROM STEP-LOOP
    Moreover, conversion exits for output conversion
    (implemented by function modules called
    CONVERSION_EXIT_xxxxx_OUTPUT) do not allow
    - MESSAGE E...
    to be used.
Trigger Location of Runtime Error
Program                                 SAPLSHL2
Include                                 LSHL2F19
Row                                     3
Module type                             (FORM)
Module Name                             TECHNISCHE_INFO5
rce Code Extract
e SourceCde
1 ***INCLUDE LSHL2F19 .
2 form technische_info5.
>>   call screen 1900 starting at 5 8.
4 endform.
5
6 &----
7 *&      Form SHRINK_VALUES
8 &----
9 *       text                                                           *
10 ----
11 * --> p1        text
12 * <-- p2        text
13 ----
14 form shrink_values.
15
16   loop at dynpselect.
17     clear checktable.
18     if dynpvaluetab-lowvalue ne space and dynpvaluetab-lowvalue na '*'.
19       move 'EQ' to checktable-op.
20       move dynpvaluetab-lowvalue to checktable-low_value.
21       append checktable.
22     endif.
What could cause the problem by selecting only 0Material when checking the InfoCube 0PUR_C01 content? What does that mean by this STOP msg "Settings for material number conversion not found"?
Thanks

Hi Kevin,
Set the length of 0MATERIAL and change conversion to alpha:
Re: Error Installing 0MATERIAL from Business Content
Best regards,
Eugene

Path in Classpath for file SapMetamodelWebdynproContent.zip not found.

Similar Messages

Maybe you are looking for