Record drive/partition "Audio Files /Audio Recording" not found!

HAAAAAAAAAA !!!!!! I get this message every time I want to record audio !!!!!
Record drive/partition "Audio Files /Audio Recording" not found!

myrna wrote:
Any idea what path blogger Jim Frazier uses? BTY, only the audio portion does not record; the >instruments record just fine. If this is indeed a bug, is there a workaround that will get me recording >until a fix is found...
I actually have not had this happen to me in several months, and in fact, haven't even thought about it in a while.
But back when it would happen, I would be working away, recording audio without any problems, and then I'd hit record again for something, and out of nowhere, get a message like this:
"olumes/Audio Drive/Album Projects/John Doe/Song title/Audio Files" not found.
When the first word should have been "Volumes".
So I would click and hold the record button to get to reset my audio pathway, and the proper path would already be listed. I would then merely click the "Set" button, and be back in business.
And there were even a handful of times when I would get that message with the full name listed, the V was there in "Volumes', and everything listed correctly, and going to the record settings, everything was set properly. But I'd still have to hit "Set" to remind Logic where the pathway was pointed to.
Definitely a bug.
But... this bug never happened to me in Logic 7. It was only since installing and using Logic 8, that it occurred. And as I mentioned, it now hasn't happened in months.

Similar Messages

Audio file "086_Grand_Piano2_ped_f.aif" not found!

Garageband keeps telling me that most of my instruments can't be found. The message "Audio file “086Grand_Piano2_pedf.aif” not found!" comes up on 50% of my instruments but with different .aif files. The files are the ones telling Garageband what sound it should give the MIDI signal coming from the keyboard.
I have a Yamaha USB keyboard attached to my 13" MBP running OSX 10.6.5 and iLife '09. I have no idea where the files have gone since i havent been using GB for a few months until yesterday when the problem started occurring.
Message was edited by: Fredde88

This looks like your Instrument Library is not okay. It sits in HD/Library/Application Support/Garageband. What do you see there?
Maybe it makes sense to re-install GB completely.

Audio file "Guitar2_GTRs2_MiXv3.caf" not found.

I am trying to play my second basic guitar lesson in Garageband, but this message: Audio file “Guitar2GTRs2MiXv3.caf” not found. keeps popping up. Anyone have any suggestions or solutions?

Hi,
same here. It worked right after I installed ilife'09. I watched the second guitar lesson and it was fine. Then I decided to update and after that I was able to download the second lesson again (two lesson 2 icons appeared). After the download there was again only one icon, but then the error with the missing file occured.
Very annoying, I bought Ilife'09 just for the guitar lessons and now I cannot proceed with the second lesson!
Duc

Audio file "Piano1_PNO_090109a1e66740.caf" not found

I'm trying to load Piano Lesson 1 in GarageBand and getting this error:
"Audio file “Piano1PNO090109a1e66740.caf” not found."
Any ideas? Thanks.

Try going to you home folder/Library/Application Support/Garageband/Working Copies folder, and deleting the files in there. These are temporary copies that save your place when you work the lessons, and sometimes the get corrupted. Next time you open the lesson, it should work, but you will have lost your progress.

Can't access some instruments in the library. For example the pop horns came up saying Audio file "YTBRASSA#2X01" not found! Whats happening?

I have just loaded this on my computer and it has done it from day one. Any ideas?

I have just loaded this on my computer and it has done it from day one. Any ideas?

Record Drive/Partition not found

I am getting this message when trying to arm a track for recording :
Record drive/partition “es/Audio 1/Tom and Dirk/My Own Sweet Time/Audio Files/Audio Recording” not found!
Any ideas? I was recording a take just fine and wanted to record a second take and got the above message. It does it when I create and arm another track for recording. I tried restarting the session, restarting Logic, rebooting the machine, repairing permissions all to no avail. What is going on?

This is a BUG!!! A big one at that.
I know 3 other Logic 8 users experiencing this.
I do not know what causes it, although it may happen after you delete an audio region, like discarding a take.
The "es/Audio 1/ etc... should say "Volumes/Audio 1/ etc... I've gotten "olumes/Audio 1/etc... and even had it read the exact name of the Audio path "Volumes/Audio 1/etc...
However, if you had simply hit the "O.K." button, Logic would have taken you directly inside the proper Audio Files folder, where you would hit O.K. again, and be back up and running.
So while this bug is quite annoying, just click O.K. at the prompts, and the original audio path will be restored.
Hit Logic's Feedback page hard with this one.

Record drive/partition "500G Ext HD Western Digital" not found!

I don't know why I'm getting this message when I open any songs I've recorded in Logic Express. It just started doing this today. Here is the message:{Record drive/partition “500G Ext HD Western Digital” not found!}
I do not get this message when I open and work on songs I've recorded in Garageband.
The 500G Ext HD is my external hard drive.
Does anyone know what this means and how I can resolve it and get back to recording music??

Does the disk appear OK on your desktop?
When exactly do you get this message? When you double-click on a Logic file on your external drive? Or when you start a new project? Is your record path set properly in Logic?
First, as you may be nearing a hard disk problem, make sure that all essential files are backed up properly.
Then, open up your Disk Utility and run 'Verify Disk' and 'Repair permissions' on your external drive. If you have a copy of Disk warrior, even better.

Record/drive partition "jt machine" not found

When I click the record button, I get the following error message: record/drive partition "jt machine" not found
MacBook Pro, Powermac G4 dual Mac OS X (10.4.7)

Hi,
When I click the record button, I get the following error message: record/drive partition "jt machine" not found
Is "jt machine" one of your drives/partitions?
WH

Record Drive/Partition...

I've got Logic Pro 7 the Academic version and for some reason it's giving me a whole ton of problems. The main one, though, is, when I go into the 24 track template, and click the record button, I get the following error:
Record Drive/Partition "OS X HD" Not Found!
I click ok, it goes into the file saving thing, I type in something (gtr1 or something) and it says:
"Could Not Create File"
Anyone know what might be going on?

Every Logic song has an audio path that is where the audio files recorded will reside.
What's happening, is that template/song is looking for a volume (hard drive) that doesn't exist on your system.
When that prompt comes up, navigate to the hard drive you plan on using for recording audio, and select it. You can even goes a far as selecting a specific folder on that hard drive (recommended). Then save that song. The audio "pathway" will then be remembered the next time you open that template up.
Read up on setting audio paths, saving songs as projects, and other related issues.

How to make an audio file on Dreamweaver not auto play?

hi,
ive been trying to make my audio file on dreamweaver not play when the webpage is opened.
i have tired the 'autoplay, false' however this dosent seem to work for me. im using Dreamweaver CS6
im hoping for some help as this is becoming frustrating!
and i am using a music file which has been downloaded!

At a minimum, you need MP3 and OGG audio files. If you don't have them, use the online converter below: http://media.io/
With an HTML5 doc type, your code should look like this:
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 Audio Demo</title>

</head>
<body>
<p>This works in all modern browsers. </p>
<audio controls>
<source src="path/yourSong.ogg" type="audio/ogg">
<source src="path/yourSong.mp3" type="audio/mp3">
<p>Your browser doesn't support audio.</p>
</audio>
</body>
</html>
Nancy O.

Breadcumbs don't work online: '404 - File or directory not found'

Breadcrumbs all work fine when testing my AirHelp application offline on my Windows 7 pc, (or if I access it as online browser based help). However, when I try to test the online Airhelp most of the breadcrumbs return a '404 - File or directory not found' error.
My RoboHelp Project has been created as follows:
1. There is a homepage created inside of RoboHelp
2. Then I have linked a number of framemaker books, for each of which the FM table of contents is being converted to create a new associated TOC.
3. In the master TOC I have added a New TOC Book for each framemaker book (making it a book with a link to a htm), under the New TOC Book I have inserted a TOC placeholder for the appropriate associated TOC.
When the Online AirHelp version is run, the breadcrumbs can only be used to navigate to the homepage and to the New TOC Books at the level immediately beneath the home page. The links to these pages seem to make sense, being of the form:
Breadcrumb
Link
Home
event:homepage.htm
Home/User Guide
event:../../../User_Guide.htm
Where it goes wrong is for the breadcrumbs futher down the path which have links similar to those shown below:
Breadcrumb
Link
Home/User Guide/Introduction
event:introduction.htm
Home/Handbook/Sign_Conventions
event:Sign_Conventions.htm
In both of the above the URL request that is being passed to the online server is not the full path, (it seems to be a relative path?) Is this the reason why the breadcrumbs don't work, and if so can you suggest what I need to do to get them working?
I am up against a deadline, and at the moment the only way forward I have is to abandon the converted Framemaker TOCs and have RoboHelp autocreate a TOC for the whole project for me, however this is not a practical solution because the folder structure is not the same when I do this and would require a great deal of manual editing each time it is rebuilt.
Hoping somebody out there can please assist?
Thanks.

Thanks TP,
I have many public IP's available. Do I need to install the RD Web access role on the DMZ server that has the RD Gateway role even if i have spare public IP's available?
I've basically have this setup "3.1. RD Gateway without AD DS in perimeter network deployment:"
On the below link
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
currently there's an CNAME record in DNS for remote.external.com which points to Server3.internal.pri
which holds the RD
Connection Broker, RD Licensing and RD Web Access roles
Are you saying to create an A record and point it to Server3.internal.pri
internal IP? I'm not getting certificate errors (yet) so do i have to run the script? i ask this as the error message i'm getting (404 - File or directory not found) doesn't seem to be related to certificates, i'm making changes to a production environment
so i have to be extra carefull!
Cheers!

RD Gateway - 404 - File or directory not found - Remote Desktop Services 2012 R2 - External users

Hi All,
I’m currently deploying RDS to our network, I’ve installed and configured the RD Gateway role – accessing https://remote.external.com/RDWeb internally works fine but not externally. Externally https://remote.external.com reaches the servers default IIS page
but once I put /RDWeb I get the error 404 – File or directory not found.
I’m not sure what’s not configured properly but below is the setup – keep in mind that the internal domain is different to the external FQDN i.e. the server name of the GD Gateway is Server4.internal.pri and the FQDN to access RDS externally is remote.external.com
- Server1.internal.pri Internal Network
RD Session Host
- Server2.internal.pri Internal Network
RD Session Host
- Server3.internal.pri Internal Network
RD Connection Broker, RD Licensing, RD Web Access
- Server4.internal.pri DMZ Network
RD Gateway DMZ IP/ Internal IP
- Certificate for all servers is a wildcard *.external.com
In the RDS Deployment Properties
Deployment Properties> Certificates> all certificates are configured with a wildcard certificate e.g. *.external.com
Deployment Properties> RD Web Access server= server3.internal.pri URL = https:// server3.internal.pri/RDWeb
Deployment Properties> RD Gateway> Server name = remote.external.com – I’ve understood that this is the URL (FQDN) to access RDS and not the RD Gateway servername itself
RD Gateway Manager Properties
Browse and import certificate> *.external.com
Transport Settings> IP address for HTTPS = 192.168.x.x (DMZ IP)
Transport Settings> IP address for UDP = 192.168.x.x (DMZ IP)
IIS
Both the RD Gateway and the Connection Broker have https certificate as *.external.com and in the site bindings https is * for ip addresses, specifying the DMZ IP on the RD Gateway doesn’t fix the issue
DNS, Network, Domain etc..
remote.external.com points the Public IP in DNS with an A record – Public IP is NATed to the RD Gateways DMZ IP on the firewall – RD Gateway is joined to the domain – RD Gateway has another NIC with an internal IP
Firewall
Port 80, 443, 3391 is open from the internet to the RD Gateways DMZ IP, RD Gateway also has an internal IP with full access to the other RDS roles
Errors I receive with the MS Best Practice Analyzer
Problem:
The Remote Desktop Gateway (RD Gateway) server Secure Sockets Layer (SSL) certificate may not have a valid certificate subject name.
Impact:
If the RD Gateway server is configured to use an SSL certificate with a certificate subject name that is not valid, users cannot connect to internal network resources (computers) through the RD Gateway server.
Resolution:
Use the RD Gateway Manager tool to select a valid SSL certificate for the RD Gateway server to use.
Even though I did configure this… seems like it might be from the split DNS
Other
I can access RDS from the RD Gateway box https://remote.external.com and client machines
no certificate errors internally, either externally when I reach the default IIS page of the RD Gateway i.e. https://remote.external.com
Any help is much appreciated!

Thanks TP,
I have many public IP's available. Do I need to install the RD Web access role on the DMZ server that has the RD Gateway role even if i have spare public IP's available?
I've basically have this setup "3.1. RD Gateway without AD DS in perimeter network deployment:"
On the below link
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
currently there's an CNAME record in DNS for remote.external.com which points to Server3.internal.pri
which holds the RD
Connection Broker, RD Licensing and RD Web Access roles
Are you saying to create an A record and point it to Server3.internal.pri
internal IP? I'm not getting certificate errors (yet) so do i have to run the script? i ask this as the error message i'm getting (404 - File or directory not found) doesn't seem to be related to certificates, i'm making changes to a production environment
so i have to be extra carefull!
Cheers!

Troubleshooting Lync 2010 404 - File or Directory Not Found

Reading through several posts in this forum about 404 errors, none of the ideas have helped me with this problem
I have a single Lync 2010 server used for IM, Video and Audio conferencing; no voice. Lync 2010 clients work just fine, getting the Web App to work with an emailed meeting link like https ://meet.mydomain.com/username/C32249V3 displays a web page with 404
- File or Directory Not Found. Silverlight is installed, no errors in Event Viewer for Lync, iisreset has no affect.
Open for other ideas to try and places to look at?
AIS

Hi, you can check before with a Ps command like
$cred1 = Get-Credential "litwareinc\kenmyer"
$cred2 = Get-Credential "litwareinc\pilar"
Test-CsWebApp -TargetFqdn atl-cs-001.litwareinc.com -UserSipAddress "sip:[email protected]" -UserCredential $cred1 -User2SipAddress "sip:[email protected]" -User2Credential $cred2
$cred1 = Get-Credential "litwareinc\kenmyer"
$cred2 = Get-Credential "litwareinc\pilar"
Test-CsWebApp -TargetFqdn atl-cs-001.litwareinc.com -UserSipAddress "sip:[email protected]" -UserCredential $cred1 -User2SipAddress "sip:[email protected]" -User2Credential $cred2
TechNet Link
regards Holger Technical Specialist UC

FDM Import error : 404 - File or directory not found.

I am trying to import 550,000 rows/records into FDM. I am getting the below error message while doing the import. Any help in resolving this would be appreciateble.
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Thanks

This happens when i import from desktop and not from inbox. I have not tried importing from inbox. I will update the link as soon as i try importing from inbox.
Thanks
ARB

404 - File or directory not found - HFM WORKSPACE

Hello All,
We are seeing the error below when a user logs onto an HFM app.
*"404 - File or directory not found.*
*The resource you are looking for might have been removed, had its name changed, or temporarily unavailable."*
When they click on Administration -> and any menu items, the error goes away and they are able to go to that navigation page.
Could anyone suggest how to prevent this from happening?
Thanks in advance,
Regards,
SM

Ok.
Things to check:
#1 - If it is a default startup item from workspace, you can go to the preferences menu item and change that. (File --> Preferences --> General --> Default Startup Options)
#2 - If the default item is in the reports explorer, check preferences as well. (File --> Preferences --> Explore --> Default Folder
#3 - If none of that works, you can try clearing out the user preferences for the user by looking at the HFM database. Go to the following table : <app name>_USERPARAMS and pull all records that match the username (DB field = username) in question. You can remove those rows from the table and it will reset that user's preferences. I THINK HsvSystemInfo_LastContentSrc points to the last item they were using and deleting that might be sufficient, but I haven't had to do this in a while so I cannot say for sure.....

Record drive/partition "Audio Files /Audio Recording" not found!

Similar Messages

Maybe you are looking for