Pause Slide Narration upon Enter

All of my slides have narration audio files embeded so that they can take advantage of the closed captioning. I want the audio narration to pause when a user enters a slide and wait until they click a button to start the audio. Currently, when entering a slide the audio plays automatically from the start of the slise. How do you pause a slide upon entering?
Thanks,
Rusty

I found my own solution. The narration needs to start anytime other than at 0.0sec and after a click box that pauses the slide until clicked. The duration of the click box needs to be set so it stops before the the start of the audio duration.

Similar Messages

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?
Solved!
Go to Solution.

Chuck72352,
Hello! It is my understanding that you need to add the individual files to the Source Code Control along with the .lvproj file.
Here is a great deal of information on Source Code Control Practices in LabVIEW.
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Upon "Enter Time Machine", viewing of TM/TC backups freezes

When viewing TM/TC backups, after clicking on "Enter Time Machine", I have to "option/cmd/esc" out of TM/TC to get out of it -- once i've entered into it -- under the following conditions:
Configuration:
The freezing is seen in the following configuration: v10.5.4 with TC 7.3.2, APU 5.3.2 (532.8).
Notes: This is a brand new macbook and TC. I upgraded the OS on the macbook from 10.5.2 (that is what i got from the dealer a few days ago) to 10.5.4 and then applied the latest security patch for 10.5.4.
I sucessfully did my first full back up (22GB) to TC -- while running 10.5.2/TC 7.3.2/APU 5.3.2 (532.8) -- after I disabled energy saver and turned off airport and went via ethernet cable.
Note: My "VirusBarrier X5" anti virus software (on the mac os side) is turned off (it was part of the install with parallels/bitdefender).
I tested three times in each of the following scenarios:
Notes: (1) In all tests, the TC-to-macbook connection is via AirPort with the devices 12" away from each other. (2) Parrales is not running. (3) VirusBarrier X5 is not running.
~~~~
Test results:
1. If Time Machine preferences is set to OFF, then upon entering TC, then TC will freeze/hang immediately after clicking on "back up the hour before" (or any other back up or on the "back arrow"). The "cancel" option on the GUI will then not work. WORKAROUND TO GET OUT OF HUNG STATE: option/cmd/esc out of TC. -- FAIL.
1.1 After performing "option/cmd/esc", the Finder process in Activity Monitor, is seen to transition from "Not Responding" to 0% CPU. (intermittent) -- FAIL.
1.2 Control test: If Time Machine preferences is set to OFF, then upon entering TC, then TC will NOT freeze/hang if I immediately click on "cancel" in the GUI. -- PASS.
1.2.1 After clicking on "cancel", the Finder process in Activity Monitor, is seen to transition from 15% CPU to 0% CPU. -- PASS.
2. If Time Machine prefernces is set to ON, then upon entering TC, then TC will freeze/hang immediately after clicking on "back up the hour before" (or any other back up on the "back arrow"). The "cancel" option on the GUI will then not work. WORKAROUND TO GET OUT OF HUNG STATE: option/cmd/esc out of TC. -- FAIL.
2.1 After performing "option/cmd/esc", the Finder process in Activity Monitor, is seen to transition from "Not Responding" to 0% CPU. (intermittent) -- FAIL.
2.2 Control test: If Time Machine prefernces is set to ON, then upon entering TC, then TC will NOT freeze/hang if I immediately click on "cancel" in the GUI. -- PASS.
2.2.1 After clicking on "cancel", the Finder process in Activity Monitor, is seen to transition from 15% CPU to 0% CPU. -- PASS.
~~~~
Additional notes:
1. It is observed that when entering TC, the "back up of my macbook" Device is then mounted to the desktop. When clicking "cancel", while doing the control test mentioned above (or even in the failed tests), this Device does not then unmount itself. Is this expected behaviour?
1.1 The failed and passing test scenarios described above are the same regardless of whether or not the "back up of my macbook" Device is already mounted to the desktop.
2. In Finder, under SHARED, the "my Time Capsule" share appears to always be in the "Connection Failed" state -- whether or not "back up of my macbook" Device is mounted to the desktop.

For my issue, I solved it by going into the Preferences of my "VirusBarrier X5" program and adding the "TC" device to "trusted zone" under the "scanner" tab.
(Even though I made sure that the "VirusBarrier X5" program was closed/quitted -- as viewed from the doc, I still needed to add the "TC" device to "trusted zone" under the "scanner" tab).
Now, upon "Enter Time Machine", the viewing of TM/TC backups NO longer freezes. I also selected a file and then pressed the restore button and that worked as well.
Source:
Apple.com > Support > Discussions > Mac OS X v10.5 Leopard > Time Machine
http://discussions.apple.com/forum.jspa?forumID=1227
http://discussions.apple.com/thread.jspa?messageID=7538067&#7538067
* http://discussions.apple.com/thread.jspa?messageID=7259067&#7259067
* http://discussions.apple.com/thread.jspa?messageID=7317674&#7317674
* http://discussions.apple.com/thread.jspa?threadID=1222415&tstart=105

Focus is removed from all cells upon enter press. Advanced datagird

In the advanced datagird when one clicks on a cell and presses enter keyboard button the focus moves to the cell directly the cell bolow. I need to change it so that the focus is removed from all cells upon enter press.

That would work but the other cell would still get focus momentarily, which is not nice for athetics. I need to bypass it entirely.
I've tried to do varius things but I can't event capture the keyUp event:
public function ignoreKey(event:KeyboardEvent):void {
                          event.stopImmediatePropagation();
                          event.preventDefault();
    <mx:AdvancedDataGrid keyUp="ignoreKey(event)"
etc

Is there any workaround to auto-select the shipping options upon entering the zip/postcode?

Is there any workaround to auto-select the shipping options upon entering the zip/postcode? Because currently, the user still needs to select the shipping option again (radio button type).

Yeah, but its custom coding in conjunction with a 3rd party for the postcode lookup. You also then need to handle the annoying dom manipulation BC does with its code on things like discount code fields, shipping option changes etc effecting your code. You really need to have a good understanding of coding AND BC in this case unfortunatly.
Possible though, but if you do not want to pay for it to be done or not able to do it yourself - Best to avoid this if you can on the project.

If I access the website of Cebu Pacific I get as reply upon entering a search request "HTTP Error 400. The size of the request headers is too long.", but if i use private browsing i do not get this reply. How do i resolve that?

If I access the website of Cebu Pacific Air I get as reply upon entering a search request "HTTP Error 400. The size of the request headers is too long.", but if i use private browsing i do not get this reply. This refers to Firefox 5.0 on ubuntu 11.04
I have tried to resolve this through deleting history and the cookies, but i always get the same reply. Although if i use firefox (ubuntu) private browsing or Firefox on Windows 7 i do not get this error message.
What causes this error and how do i resolve this?

Copied from the link mentioned below.
''That is usually a problem with corrupted cookies. Clear the cache and the cookies from sites that cause problems.
"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" ''
https://support.mozilla.com/en-US/questions/785186?s=http+error+400&as=s
Check and tell if its working.

Ipad2, I can not sign in to imessage after turning it off and doing a hard reboot. Upon entering my info it states no network connection, but I can use it o surf in Safari and iter websites. Any suggestions. Went on with Apple, they think its my network.

Ipad2, I can not sign in to imessage after turning it off and doing a hard reboot. Upon entering my info it states no network connection, but I can use it o surf in Safari and iter websites. Any suggestions. Went on with Apple, they think its my network. All other wireless equipment can ign on without problems. This happened after I turned imessage off.

Step by step, how did you arrive at seeing this agreement?

HT4009 I'm attempting to down load an app by the name of hudmaniax,upon entering my password for purchase approval I'm prompted to re enter my password a second time followed up with a form to create a security form ...I.e name of first school attended e

I'm attempting to down load an app by the name of hudmaniax,upon entering my password for purchase approval I'm prompted to re enter my password a second time followed up with a form to create a security form ...I.e name of first school attended etc etC.

This is normal behaviour. Apple have recently introduced increased security to protect you from fraudulent transactions. Once you have answered the questions (remember your answers) you will only be asked for them occasionally in future.

Debugger: Watchpoint on local variable is triggered upon entering routine?

Hi
My problem is perhaps best illustrated in this small program:
REPORT zzkc_watchpoint.
PERFORM form1 USING 'AB'.
PERFORM form1 USING 'CD'.
PERFORM form1 USING 'EF'.
PERFORM form1 USING 'GH'.
FORM form1 USING    value(p_1).
DATA: lv_local(3)     TYPE c.
IF 1 > 2.        <----
Watchpoint triggered here - regardless of condition
ENDIF.
lv_local = p_1.
IF 1 > 2.       <----
And here when condition is met.
ENDIF.
ENDFORM
I set a conditional watchpoint (all Module Instncs) on variable lv_local, condition: lv_local = 'EF', BUT: The watchpoint is whenever form form1 is entered. It's also triggered when lv_local eventually is set to 'EF", but why is it triggered upon entering form1???
Best regards
Kenneth

This happens because the visibility of local variable is only in the subroutine. When system calls the subroutines subsequently, it reassigns the content of the local variable. If you watch the watchpoints (Watchpoints tool in the Break/watchpoints), you will see that for each subsequent call, system creates a new data reference and assign it to the Current Variable and Old variable. And it has the similar content (blank value) in the Current Value & Old Value.
FORM form1 USING value(p_1).
DATA: lv_local(3) TYPE c.
IF 1 > 2. " At this point, Current Value and Old Value in the Watch points are same, BLANK.
ENDIF.
lv_local = p_1.   " here, After this statement Current Value would change to value of the P_1
IF 1 > 2.
ENDIF.
ENDFORM.
If you change the variable scope by changing it as the STATICS, it would only stop when it reaches to the EF.
Check the last section:
http://help.sap.com/saphelp_erp2005/helpdata/EN/f1/792442db42e22ce10000000a1550b0/frameset.htm
In the OLD debugger, as soon as the validity of the variable changes, system would remove the watch point on that variable.
Regards,
Naimesh Patel

Capture and email a certificate upon entering the slide

I was wondering if anyone might have a solution for a requirement similar to the following.
We deploy Captivate (5.5) content through our Oracle e-Business Suite LMS. The requirement is that when a learner reaches a certain slide at the end of the training (a certificate), Captivate will capture the slide as a PDF and email the PDF to an Outlook mailbox from the learner's workstation. Automation would be nice (make it happen as soon as the learner hits the slide) but a button-click method would be OK also. Could custom Javascript accomplish this task? Thank you for your help.

Take a look at Jim's widget here: http://captivatedev.com/2011/10/09/adobe-captivate-widget-dynamic-pdf-export/

Best practise for pausing slide during flash video playback

Hi all,
There really should be a simple option for this - apologies if there is, but I am struggling to find it!
I have some videos as part of my presentation, that I DO NOT want the user to skip! I am trying to implement a "Continue to next slide" button that only appears once the video is complete. I have experimented with several things. Most recently, setting the button to appear at the time in the slide when the video completes, which is OK, unless the user pauses the video :-). Then of course, the slide continues playing and the button appears!!
Is there an easier work around? I have also tried placing the FLV in an animation and programming the continue buttons manually, so that they only appear at the end of the video, this works to an extent, but not really what I am looking for as I feel it should be possible to do this without using an animation!
Im sure someone here has come accross this problem. I just wish there was a simple option to display button upon movie complete!!!!
Thanks,
Tristan

Checking Console.app messages once again, the following lines seem to coincide with at least some of the stalling incidents:
===
2013/03/05 1:32:33.231 am Finder[595]: PlotISImageRef 0x29f50026 InContext 0x7f986b3c1340 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:32:34.499 am Dock[590]: no information back from LS about running process
2013/03/05 1:34:58.597 am Safari[8023]: PlotISImageRef 0x20990018 InContext 0x7ffb9b9d6ea0 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:35:00.853 am Dock[590]: no information back from LS about running process
2013/03/05 1:35:39.917 am TextEdit[8026]: PlotISImageRef 0x25910017 InContext 0x7f8873a45940 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:35:41.186 am Dock[590]: no information back from LS about running process
2013/03/05 1:42:14.318 am Finder[595]: PlotISImageRef 0x29f50026 InContext 0x7f986c064400 in {33.000000,514.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:42:15.986 am Dock[590]: no information back from LS about running process
===
Any significance to this? Thanks for any help.
- Gord

Paused Slide continues when I click anywhere on the slide -- why? (CP5)

Hi -- at the end of the CBT I am creating I present some challenge questions. I am not using the Quiz feature as I do not need to capture the students answers.
I added a blank slide with an image with roll-over captions. I added a "Continue" button so they can go to the next page after they are done reviewing the image.
Everything works fine, the slide pauses so they have time to mouse-over the image, and the continue button takes them to the next page when clicked.
The weird thing is that it also goes to the next page when I click anywhere on the screen. This only happens on these three slides, the rest of my movie does not progress when you click on the background.
For the slide, I have it set to On Enter=Continue and On Exit=No Action, Display Time=3 seconds
For the Continue button, I have it set On Success=Go to the next slide, Attempts=1, Last Attempt=Go to the next slide, Pause After=1.1 sec
Does anyone know why when I click on the slide it goes to the next slide? I want the slide to pause until only the Button is clicked.
Thanks!

Your Continue button is currently set up so that if the learner does not click the button a Last Attempt action will be used. By default this will be Continue. So although you only wanted the user to go to the next slide if they clicked the button, by setting attempts to only 1, you've told Captivate that any click outside the button should invoke the failure action for that button, which will be to Continue to the next slide.
Try setting your button to infinite attempts. This disables the failure action.

Accordian interaction pauses slide. Any way around this?

Hi,
I've made a slide that include an audio intro ("click each heading to learn more.") When I add the accordian widget to the page, the slide is automatically paused and the audio doesn't play. I worked around this by having the widget appear AFTER the audio plays. The widget is set to display for 1 second.
But I also have the playbar enabled. When a user clicks the play button in the player, the slide advances for the 1 second of the widget and then stops. User has to click play in the playbar again to advance the slide.
Any ideas on how to work around this? I'd like to have the widget NOT pause the slide.
Thanks in advance for any info.
Sherri

Here's my timeline. I have a click box, over a button. This shows up after the audio. If user clicks it, the presentation goes to the next slide. This is not the issue.
The issue is when the user clicks Play in the playbar at the bottom (see below). When they click "play," the slide advances for the duration of the widget (1 second). They have to hit play again to go to the next slide.

Pausing slides using master slides and widgets

Hi,
Is there a better way that what we are doing becuase we ware wasting time and we put this process in pace in CP 5.5 and want to know what we can better in CP7.01
We want to have our slides pause at the middle of each slide
Currently
- Our navigation buttons are on the master slide . These are custom static widgets to do forward and back because interactive objects cannot be put on master slides
- so we add a hidden object on each slide to pause
We have complicated branching becuase
- we have glossaries and help
- branched scenarios
So we really need this to work releiably
Problems
- our widget doesn't show on the branched viewer
- we make mistakes using the variable recording the previous viewed slide
We were worried about using a playbar becuase it
- allows you to exit assessments
- allows users to skip our simulations
regards Paul

Your statement '..because interactive objects cannot be put on master slides' is no longer valid since CP6: there is one type of interactive objects that can be used on master slides (or timed for the rest of the project) which are the shape buttons. I have been talking a lot about them:
http://blog.lilybiri.com/why-i-like-shape-buttons-captivate-6
http://blog.lilybiri.com/toggle-shape-buttons
http://blog.lilybiri.com/want-a-button-on-question-slide-in-captivate
And I presented a webinar, info and link can be found here: http://blogs.adobe.com/captivate/2012/09/training-lilybiris-favourite-shapes-to-trigger-ad vanced-actions.html
You could easily replace the static widgets by shape buttons, they are a lot easier to 'style' and very flexible.
One example: if you want just to pause each slide, add a pausing shape button (transparent fill and no stroke) to the main master slide. Because there is no timing possible for objects on a master slide, that pause will always occur at the end of the slide, whatever its duration. You cannot time the pause! If you have a shape button with pause timed for the rest of the project, that pausing point will always be at the same absolute time (relative is not possible, thought I'd seen somewhere a question about pausing at half the slide duration but cannot find it in your text).
I (almost) never use a playbar myself. It is only useful for simple linear projects.
Lilybiri

Make button appear and pause slide after rollover slidelets have been rolled over?

Hello,
I am trying to use advanced conditional and standard actions in order to prompt a user to rollover 5 rollover slidelets before a "continue" button appears. I have attached variables to each rollover slidelet, created the button and marked it as invisbile, and have created a contitional action but I'm not sure where to attach the action:
Am I using an extremely complicated method to do something so simple? I have tried various methods, get close, but then the project continues to the next slide when it should pause until the continue button is clicked even though the property "Pause project until user clicks" is checked.
Thanks for all of your help and let me know if there's any additional information I can provide!

Hello,
I have described that work flow multiple times, mostly with clicks instead of rollovers but slidelets have two events, one of them is the rollover itself. So you'll have to trigger the conditional action with that event. But as Rod points out, the mimicked standard action (first decision) should focus only on that rollover and assign the value 1 to that boolean variable (don't increment, has no real sense). Then the condition will have a AND combination to check all the values, and show the button only in that case. You will have 5 similar conditional advanced actions, one for each rollover event. But since they will be almost identical (only the boolean variable label has to be changed), duplicating and editing that action will not take a long time. If you were on CP7 you could use a shared action, but duplicating will even there be the quicker solution IMO.
In this old blog post you'll find such an example (witth clicks as events)=
http://blog.lilybiri.com/template-for-reusing-script
Lilybiri

Pause Slide Narration upon Enter

Similar Messages

Maybe you are looking for