Pavilion HPe-510t won't start with new gtx660

I recently got a new PSU and GPU to upgrade the PC's gaming ability. PC came with a gt440, and I am upgrading to a gtx660. Power supply was upgraded to a Corsair 750M. The problem is when I go to start I get to the blue HP start screen and it just sits there. There are three beeps spread out by ~30 seconds each, and then the screen goes black with a blinking cursor icon in the corner. The PC came with windows 7 so it is not an UEFI problem. Everything works fine when the old card is put back in.
Can anyone help me with this?

Hi,
Trying running a full set of diagnostics without the gtx660 installed to make sure that your hardware is good.
It could be an incompatibilty with the video card and the UEFI level in your PC. Your PC does have partial UEFI support. Some NVIDIA 660s may have shipped with a video bios that require full UEFI support which your PC lacks. You will have to check that possible issue with the video card manufacturer.
I did update the video bios on my GTX660 to allow for full UEFI support. I was informed by the manufacturer that my particular video card was not shipped with the full UEFI video bios support as it would not work in older PCs that were not a full UEFI support.
There is a bios update listed for your PC so be sure that you are at that level.
Try clearing the CMOS and see if that solves your problem.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

Satellite Pro 460 won't start with new hard drive in

I recently got a Satellite Pro 460 but it had no hard drive in.
It starts great with no drive in but as soon as I put a brand new hard drive in it won't start.
I thought that it might be to new a hard drive so I took my old working drive out my old Toshiba Satellite and still it won't start.
Any one got any ideas why this is and what can i do about it

It sounds like 80GB is too large for that model, I really doubt the BIOS and Chipset can support more than 8GB HDD. 8GB may not even work.
Here is some information regarding different HDD modes and limitations: http://www.adminxp.com/hardware/index.php?aid=129
504MB - limitation where the system is limited by the compatibility with the values of the BIOS system and the ATA interface by help of using the CHS mode. This limitation is valid for older computers 286/386/486. (1024 cyl 16 heads x 63sectors/track x 512 = 528,482,304bytes - 504 MB). In many cases special programs will help (Disk Ontrack Manager - Seagate, Disk Wizard - WD). Some operating systems can have problems with this software support and can have higher requirements on your knowledge of the OS and used programs.
2GB - Limitation of the maximal value of the FAT16 file system partition for DOS and Windows 9x. Some older computers cannot address more than 4095 cylinders (4,095 x 16 x 63x 512 - 2,113,413,120 bytes)
4GB Limitation of Windows NT - Partition with the FAT16 system cannot be higher than 4GB - Fdisk cannot be used for creating, but the Disk manager is used (Disk management in Windows 2000)
8GB - Limitation of the BIOS system. For the support of larger capacities you need extended functions of the BIOS system. Limitations valid for the x86 computers and some motherboards with Pentium and Pentium II processors. Some other operating systems must know how to use the extended BIOS functions (Extended Interrupt 13). We can use Windows NT 4.0 as an example where you need an updated disk driver or the Service Pack. (OS - DOS 6.xx and lower, Windows 3.x and lower and some other older OS do not have the support of the Ext. Int13).
8 GB - Limitation of the FDISK program in the DOS 6.22 OS.
?? GB - Possible problem with disks larger than 67GB under Windows 9x... See article WD800
32GB - (65535 x 16 x 63 x 512 - 33,822,351,360 bytes) other limitation of the BIOS system.
68GB - Possible problem with disks larger than 67GB under Windows 9x... See article WD800
137GB - Limit for the ATA specifications (28-bit addressing for particular sectors - 268435455 sectors - 137,438,952,960 bytes)
2,2 TBytes - 32-bit addressing used by new operating systems (in Windows 98 by help of the FAT32 file system).
144 PetaBytes - a limit for new ATA specification using 48-bit addressing, in peparation. Maxtor, Microsoft, VIA, Compaq and other companies under name Big Drives participate the development. The standard should be implemented and authorized by the ANSI NCITS T13 Technical Committee organization (www.t13.org) in the prepared ATA/ATAPI-6 standard (see www.maxtor.com/bigdrive)

Sync on desktop manager won't start with new 9700

I am attaching my 9700, with a USB cable, to my laptop. The Desktop Manager software opens but it will not start the sync'ing process with my device.
- the little "check" box - "automatically synchronize device and computer when USB connected" is switched on
- I am using the latest version of Desktop Manager
- the "Synchronize" tab is in grey. It's grey'ed out. When my curser hovers over "Synchronize" it won't light up, as in, it won't let me press the Synchronize button to initiate the process.
- my 9700 is brand new. I had no synchronizing problems with my previous model, the Curve.
- my laptop is a great device, I don't currently, nor haven't had, any issues with it in the past - DELL D420 Latitude. I seem to have all the drivers I need
- I am running Windows XP
- I am not linking to a server at work. My Blackberry is set is purely a directly link from the 9700 device, to my computer, and syncs with the calendar, address book and tasks list (MS Outlook 2003 from MS Office)
- my new 9700 - I bought it 2weeks ago. It did sync in the beginning. About three times successfully. But not now obviously.
- on my Windows bar at the bottom of my computer screen it pops up "new hardware added" and the 9700 device is no longer described by its identity number (PIN ref?), it says "new hardware added, 'memory device'"
- I've searched through the Blackberry help pages and so far, all I can come up with is that my computer can't seem to recognise now, for some unknown reason, that it is connected to my 9700. Blackberry help suggested I go to the "pairing" pages of the Help guide, but I thought "pairing" was only a subject that involves Bluetooth activities. Not a USB cable connection.
Anyone got any ideas?

Hey Graeme0309,
If you disconnect the BlackBerry from your computer and open Desktop Manager, are you able to open Synchronize?
What version of BlackBerry Desktop Manager are you using?
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Front End Services won't start with new cert, SChannel error about hostname

We have an existing Lync 2013 Enterprise system set up, and many of the servers are using certs issues by our local CA. I want to move several of the certs to third-party certificates so that non-domain machines can connect. The first change I'm making is
on our Edge pool. However, I'm having an issue. Here are the details:
Our internal domain space is int.domain.com. Our external domain space is domain.com. Our Lync FE server is LS01.int.pool.com and our FE pool is pool01.int.domain.com. I have generated a CSR and requested a certificate from Globalsign with the following
characteristics:
SN: pool01.int.domain.com
SAN: pool01.int.domain.com
SAN: domain.com (wildcard)
SAN: int.domain.com (wildcard)
After applying the new cert using the topology builder, I've rebooted and the Lync Front-End Server service will no longer start. The following SChannel error is in the event logs:
The certificate received from the remote server does not contain the expected name. It is therefore not possible to determine whether we are connecting to the correct server. The server name we were expecting is ls01.int.domain.com. The SSL connection request
has failed. The attached data contains the server certificate.
After reverting back to the original local CA cert, the services start. The local cert has a ton of individual SANs set up but I was under the impression that the wildcard SANs were supported and would be ok for the hostnames.
Why is it looking for my FE server name and not the pool? Is this an issue with my deployment, or is it with the cert? I'm not sure where to go from here.

Hey Matt,
As mentioned above wildcards are only supported for Lync web services such as lyncdiscover, dialin and meeting URL's. It is OK to have wildcards in the certificates SAN, but you must also specifically include the following:
SN: pool01.int.domain.com (SN must be pool)
SAN: pool01.int.domain.com (pool must also be included in SAN)
SAN: lync-fe-001.int.domain.com (the machine name of your front end server)
This should solve the issue for you.
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Check out my blog

Premiere CS5 won't start with new UAD drivers

Any workarounds? Can I change my vst folder prior to starting the program?
Windows 7 64 bit

I would say roll back a driver as CS5 is quite old and it was working ok.

Elements 13 won't work with new camera, it won't update to raw 8.7.1

Elements 13 won't work with new camera, it won't update to raw 8.7.1. I have downloaded the patch, it is installed but the old version is this there in elements. Thanks, esther

OK I think the problem is probably related to the platform swap and you may need your account re-set. Only Adobe staff can do that. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number and previous case number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

Pavilion G6-1b59wm won't start at all

Good day .. I have a Pavilion G6 that won't start at all when the power button is pushed. I've tried it on battery only, and with the power cord plugged in. Yet nothing.
Here is what I see: When the power cord is plugged in, the power LED next to the port is white. I press the power button and it momentarily flashes white (and the F12 LED flashes). Nothing else happens. No other LEDs lite, and the screen remains black.
DIagnostic steps followed:
1. Battery was removed, and unit unplugged. Power button held for 30 seconds, and plugged back in. Nothing.
2. Battery removed and unit plugged into the wall. Power button pushed and nothing.
3. Tried a different power cord, different battery .. nothing
4. Removed the RAM boards, power button pushed .. nothing
5. Removed the hard drive (RAM still uninstalled), power button pushed .. nothing
Any further suggestions ?
This question was solved.
View Solution.

This should help you locate:
http://www8.hp.com/us/en/store-finder/index.do
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.

Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

That shows you that iPhoto is working correctly and whatever issue you are having is based in your original library.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Is it ok to leave my old photos in Aperature and start with new photos in Lightroom? MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive.

Is it ok to leave my old photos in Aperature and start with new photos in Lightroom? MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive?
Or should I transfer them to Lightroom?

That's really a personal preference. Support for Aperture is coming to an
end and you may find yourself unable to get to theses photos in the future
in the case of a HDD crash if you can't get the software to reinstall.
Faced with that prospect, I would probably put it on my list of things to
do when I am feeling really bored and looking for something to amuse myself
with. You can export your Aperture photos in their original format to a
folder on your desktop and then import them into Lightroom. Use the copy
option on the import to save the photos in a new folder within your
Lightroom catalog.

Does iTunes Connect Christmas break mean apps won't update with new folios over Christmas?

I have 2 folios that are due to be released to my app this Christmas - both fall within the 22nd-29th window iTunes have chosen to close down.
So even though I can publish my folios through DPS over Christmas and pre-plan my app description in iTunes accordingly - before the 22nd - will those published folios not appear in my app?
Thanks.

You mean updating a paid folio... don't know if that needs approving, too.
Maybe someone else can chime in here (I have no exp in that)
(mobil gesendet)
Am 16.12.2011 10:05 schrieb "jamie.dunmore" <[email protected]>:
Re: Does iTunes Connect Christmas break mean apps won't update with
new folios over Christmas? created by jamie.dunmore<http://forums.adobe.com/people/jamie.dunmore>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4088490#4088490>

Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS

Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS?

Take each of these steps as needed, and check to make sure it hasn't been fixed with a reboot afterwards before trying the next step.
Backup your data if you haven't already:
https://discussions.apple.com/docs/DOC-1992
If you use Airplay, see https://discussions.apple.com/docs/DOC-6831
If you don't use Airplay, be sure to upgrade to 10.9.2, using this update:
http://support.apple.com/kb/DL1726
Make sure your hard drive is not over 85% full.
Make sure Spotlight is not indexing.
Make sure Time Machine is not running when you do other tasks.
Check to make sure you have not accidently/purposefully installed MacKeeper, as it will slow down your Mac:
https://discussions.apple.com/docs/DOC-3036
Remove any other system cache cleaning applications.
Reset the SMC:
http://support.apple.com/kb/ht3964
Reset the PRAM:
http://support.apple.com/kb/ht1379
Check to make sure there aren't any signs the power adapter might be damaged, or the wrong one*:
http://www.macmaps.com/frayguide.html
If there are still issues, you may need to replace the battery:
https://www.apple.com/batteries/replacements.html

Apple Bluetooth keyboard won't pair with new iPad mini

Apple Bluetooth keyboard won't pair with new iPad mini

I have same results. I have an ipad mini and it will not pair with my apple keyboard. I bought a mini keyboard with bluetooth 3.0 and it will not pair either. Is my ipad defective? Or do i need a keyboard with bluetooth 4.0? Also - the mini keypad will pair with my ipad2 and my iphone 4. Only difference I can find is the ipad mini has bluetooth 4.0. Seems it should be downward compatible but maybe not.. I am not a blutooth expert!

SatelliteU300 Won't start with AC power connected and fully charged battery

I just bought a U300-13U. It works great when battery is charging and AC is connected. However if left to charge up fully it won't start with AC connected. Unpluging the power or removing the battery and running on AC makes it work fine. Is this a 'feature' to stop overcharging or overheating the battery, or just a problem with this machine. I want to run with AC and battery both connected all the time as I have done with all my other laptops.
Any help appreciated.

Hello Andy
Friend of mine has this small U300 and everything work well. I have had it few weeks ago to test WXp installation and it works perfectly.
Please test it again very carefully and if the same happen again I recommend you to contact Authorized service partner in your country. Let them check your notebook. I must be honest and say that described issue sounds strange to me and please do not wait too long. Contact service as soon as possible.
Bye and good luck!

My PC won't start with only one push of the start button.

hi guys my pc won't start with only one push of the start button. It takes me 1 to 10 pushes for it to start. I encountered this main bios error once when my pc started but it fixed on its own. What could be the problem?

Hi
The problem can be fixed by running a latest BIOS Update on your unit or if it is a mechanical issue it could be the power button itself.. you can call HP tech support if the notebook is still in warranty.. they'll be able to help you.
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Pavilion HPe-510t won't start with new gtx660

Similar Messages

Maybe you are looking for