Payment Order (multiple) Idocs need to be downloaded into single file

Hello Gurus,
I am able to generate Idocs for Automatic Payment Run in F110 for message type PAYEXT with PEXR2002 idoc type. However, what I found is the system generates one idoc per vendor for a single payment method. So, for example if I run APP for 50 vendors at a time, 50 different idocs are generated and placed in AL11. Currently the requirement is to download the idocs into flat file and upload it in Bank's website. I would like to know is there any way to download all the 50 idocs into a single file (ie a single file containing payment run information for all vendors).
PS: I use CG3Y Tcode to dowload Idoc from AL11 mentioning the directory path but this can allow me to download only one file at a time.
Any Info regarding this would be appreciated.
Thanks in advance,
-Naryanaan-

Hi
I'm facing the same problem . Were you able to solve this by heavy customization.
best Wishes

Similar Messages

Multiple IDOCS of same message type To Single File

Hi Sap All.
here i have got a tricky situation of sending Multiple IDOC's of same type to a Single File via PI.
the Integration architect has created an Integration Gudeline of how to do this.
from the SAP-ECC side the follwing below are the steps thatr he mentioned
To allow IDOCu2019s to be processed sequentially in a queue, the queue processing option on the partner profile must be selected. In addition the rule name which is used to create queue names must be specified.
NB On the partner profile (for the partner / message type) you must also set the output mode as collect IDOCu2019s (it cannot be set to transfer immediately) u2013 This means the IDOCu2019s are created but not sent to out (to SAP PI)
As standard there are two rule names delivered CONSTANT:EDIQUEUE and FIRST_16_OF_MESTYP. These rule names are linked to a SAP function module and therefore custom queue names can be build either as an u201Chardcodedu201D name or based on the data in the IDOC.
The program RSEOUT00 should be run to transfer the IDOCu2019s to PI. The IDOCu2019s will be placed in the SAP ERP qRFC (rather than the standard RFC)
My Questions :
1. how and where we can select the Queue Processing option on partner profile in SAP-ECC as mentioned above
2.how and where we can define the Rule name as mentioned above
3.how and where we can set the output mode as Collect IDOC's in SAP-ECC as mentioned above
4.what does the EDIQUEUE and FIRST_16_OF_MESTYP will do and how they linked to SAP Function modules
will be waiitng for a the best solutions.
Regards.
Varma

/people/michal.krawczyk2/blog/2009/05/21/xipi-collecting-idocs--possible-ways-with-pros-and-cons--5-ways - you will need to do a collect

Reg : Script spool file downloading into xl-file

Dear friends,
I need to find the script spool no as well as the same script spool
to be download into xl-file.
Could u please give me guidelines, how to do that.
Thanks and Regards
V.Raja sekaran

Thanks for your reply,
My requirements is like below,
I am calling the script from report, In report i have a check box for excel download,
If the user selected the option check box download into excel file than i need to indentify the spool number as well as download the script spool file into excel file.
Thanks and regards
V.Rajasekaran.

Downloading into excel file , the is alignment is out

The reports when downloading into excel file is not what we usually getting. The alignment is out.

Hi Basavaraj,
When you are creating dynamic internal table(itab1) and fields of internal table, at the same time in the same way create one more internal table(itab2) resrict this up to 10 columns.
now
DATA : num type i,
       FNAME(255) TYPE C
           VALUE '/data/sapdata/filename'.
CONSTANTS : C_COMMA TYPE C VALUE ','.
DATA : BEGIN OF I_DISPLAY OCCURS 0,
        REC(400),
       END OF I_DISPLAY.
loop at itab1
num = num + 1.
if num le 100.
   move-corresponding fields to itab2
else.
    exit.
endif.
endloop.
Give column headings
        itab2-col1 = 'name1'
        itab2-col2 = 'name2'
        itab2-col3 = 'name3'
        itab2-col4 = 'name4'
        itab2-col5 = 'name5'
        itab2-col6 = 'name6'
        itab2-col7 = 'name7'
        itab2-col8 = 'name8'
        itab2-col9 = 'name9'
        itab2-col10 = 'name10'
      INSERT itab2 INDEX 1.
      CLEAR itab2.
loop itab2.
   CONCATENATE
        itab2-col1
        itab2-col2
        itab2-col3
        itab2-col4
        itab2-col5
        itab2-col6
        itab2-col7
        itab2-col8
        itab2-col9
        itab2-col10
           into I_DISPLAY-REC SEPARATED BY C_COMMA.
     APPEND I_DISPLAY.
     CLEAR I_DISPLAY.
ENDLOOP.
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE.
      LOOP AT I_DISPLAY.
        TRANSFER I_DISPLAY TO FNAME.
      ENDLOOP.
    CLOSE DATASET FNAME.
endloop.

Sender Idoc needs to be translated into 4 text files

Hi,
Could you please guide me how can i achieve this.
Within XI this Idoc message needs to be translated into 4 text files:
Could you pls. confirm as...can i use MultiMapping or shall i go for BPM?
Thanks & Regards,
Y.Raj.

Should also work in your case:
1. Create your mapping program that will map the information from the source file
into the destination idoc. This has to be a 1:N split. Just make sure that the destination message type and message interface are are of occurrence N.
2. Also, you will have 2 destination interfaces and 2 interface mapping, one for the IDOC and one for the mail.
Now, there are a few essential steps in your configuration,
1. In the receiver determination, specify the 2 receiver systems, one for your IDOC and the other for your MAIL.
2. Now, you will have a condition window. Just type the condition on the basis of which the receiver has to be determined for the mail and the idoc business system. Just remember that the condition can be specified only for the source message.
3. In the Interface Determination, you have an option called RB CLASSIC and RB SPLIT. To do a 1:N split, you will have to do a RB_SPLIT.
You can even use xslt mapping to split source message type into multiple target messages types.for more information on the same check this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/83/2200cb50d345c793336d9a1683163e/frameset.htm

Date o/p probelm when download into flat file inf110 tcode in fi

hi,
when im create payment transaction in f110 tcode in fi , and selct the record and down load into flat file
in flat file first line it shows run date same as we given in transaction,but in second line it shows same date as before
but it shows different date example : firstline it shows 12 .10.2008 and second line 12.10.2008 is right o/p.
         but it shows as first line 12.10.2008,and seconde line 6.10.2008. why it show like that.

Hi Ganesh,
As per my understanding you have an issue with the date while downloading it into the Flat file.
It is displaying the incorrect date in the second line in Flat file.
Are you downloading the data in Notepad or in the Excel sheet?
Can you please elaborate the issue, if it is in Excel sheet then check if it is displaying multiple records for the same date.
Ex :
                    Date                   Records
             12 .10.2008             ad
                                         fg
                                         as
             6.10.2008               we
                                        af
Check if this is the case...
Regards,
Kittu

Download into excel file

Dear experts,
While iam downloading the data into .xls file iam getting one extra emptly column. How can i avoid it?
Thanks in advance
kaki

DO NOT use the suggested function modules mentioned here, they are not unicode enabled.
If you have to choose another download funtion use the methods in class cl_gui_frontend_servives.

Smart form downloaded into .xml file ??.

Hi all,
When a smart form is downloaded, it gets downloaded as a .xml file.
My question is, how does it get converted to .xml file.
Is there any function module that is called and if so what is the function module.

Hi,
You can download into XML format. However, it's not sure about uploading. Refer to the program 'SF_XSF_DEMO'.
In 4.7 Enterprise, other have seen this utlity which is completey missing in 4.6c. There is functionality to downlaod a complete form or only a particular node. (Utilities -> Download form). It will create a XML file and save it in the hard disk.
Feel free to revert back.
--Ragu

How to download a single file from abs cvs (community)?

As a little edit of soloport's ingenious script for downloading single packages/directories from ABS instead of downloading everything, this is absget.
#!/bin/bash
# Downloads a single package from CVS CURRENT (much like ABS)
# Requires one or two arguments, one which specifes the CVS path (e.g. kernels/kernel26)
# and the other who specifies the repository (defaults to "arch")
# Creates a local DIR, for example, where DIR=kernel26 in kernels/kernel26
if [ "$BASH_ARGC" ]; then
[ "$2" ] && REPOS="$2" || REPOS="arch"
export CVSROOT=:pserver:anonymous:[email protected]:/home/cvs-$REPOS
DIR="$1"
declare -a ARY
declare -i NUM
ARY=( `echo $DIR | sed 's/// /g'` )
NUM=${#ARY[*]}-1
PKG=${ARY[$NUM]}
echo DIR="$DIR", PKG="$PKG", REPOS="$REPOS"
[ "$REPOS" = "arch" ] && cvs -z3 co -r CURRENT -d $PKG arch/build/$DIR
[ "$REPOS" = "extra" ] && cvs -z3 co -r CURRENT -d $PKG extra/$DIR
[ "$REPOS" = "unstable" ] && cvs -z3 co -r CURRENT -d $PKG unstable/$DIR
rm CVS CVSROOT -R 2>/dev/null
exit 0
else
echo "not enough arguments"
exit 1
fi
As you maybe can see, it's missing a line for community. Whenever I try to test this method with the community dir (/home/cvs-community) I get this error:
$ export CVSROOT=:pserver:anonymous:[email protected]:/home/cvs-community
$ cvs -z3 co .
no such user anonymous in CVSROOT/passwd
cvs seems to authenticate in a different way than cvsup does, I've tried for hours to get this working (even with the help of wireshark), but with no luck. Can anyone help?

byte wrote:This could be a hint: http://cvs.archlinux.org/cgi-bin/viewcv … vsroot=AUR (not "Community")
yes, but I don't know how to access it without using abs or viewcvs

Payment Order Outbound Idoc

Hi Gurus,
I am able to generate IDoc for PEXR2002 for PAYEXT after running payment program in F110. However when I checked the segments, it populates only a few of these segments (which are optional) and other segments are missing. Can anyone tell me why this is happening.
The missing segments are:
Segment Types: E1EDK12, E1IDT01, E1IDKU4, E1EDL03, E1EDL02, E1IDB02,E1IDBL2, E1IDBW1, E1EDM03, E1EDU03, E1EDPA1, E1EDK14, E1IDPU2, E1IDPU3, E1IDUU5, E1EDV03, E1IDUU4, E1EDW03, E1IDUU2, E1IDKU6, E1EDLA1, E1IDMU5, E1IDT02, E1IDKU7
I fail to understand where does the data for these segments come from. I found that user exits could be used to populate E1IDBW1 segment. Atleast I need to populate E1IDBW1, E1IDPU3, E1IDUU5, E1IDKU6 segments (per business requirement these are mandatory). Would appreciate if any one could help reg. the same.
Thanks,
NK

Closing issue since the issue is not relevant.

Automatic Payment Process through IDOC and Receive Message Acknowledgement and BANST file format

Hi Experts,
We are implementing payment process to our client through Idoc.
Normally the process will go like below. Once Payment Initiated --> IDoc will generate --> This Idoc process through PI system and send to Bank.--> Once payment data received bank --> it will generate acknowledgement receipt and Bansta file and send it PI system --> This PI system system again send it --> SAP system. Here I want to know the required configuration from PI system to SAP system while receiving acknowledgement and Bansta file. And let me know if u guys have steps...
Thanks,
Raviram

Hi,
>is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping?
yes
>In that case what should the Message Type we are using in the file-sender adapter look like?
If you have no mapping it doesnt matter, the message type will not be validated during runtime. You can take the IDoc type imported from the SAP system
Regards,
Udo

File to IDOC ( need advise on how to map file fields )

Hello friends,
I spent quite some time reading all the helpful blogs and threads regarding File to Idoc scenario. However I had a very basic question ( maybe its trivial as I am just new to XI).
In my scenario I have Bank Master data (in a CSV file) and it does not correspond exactly to Bank Master IDOC structure BANK_CREATE01.
I understand that I will need to use File adapter to get this file into XI and then use an IDOC adapter to send it to R/3. (Pl correct me if I am wrong)
Now when I use file adapter, how will I do the data mapping. I mean do I need to create a structure which corresponds to file fields and then XI will automatically load my file fields into this structure and then I can use this structure to map fields to IDOC.
My only issue seems to be how will I see the FLAT FILE data in XML FORM in XI.
To explain it further my CSV file looks like
"GB,123456,11223344,GBP, London,.."
where
GB corresponds to country,
123456 corresponds to Bank key,
112233445566 corresponds to Bank account,
GBP is currency and so on
So should I create a data type maintaining same sequence of fields above without using any hierarchy like in the IDOC.
If this is not possible then will I need to transform my input file exactly into IDOC structure and then use it.
Hope I have manged to explain it.
Appreciate your help on same.
Thanks
Shirin

Hello Shrini,
First of all The CSV file has to be changed in to an XML file , To achieve this File Content Conversion has to be done.Once this is done, please make the following changes in R/3 and PI to push Idoc in to PI.
Configuration required at Xi side:
Go to IDX1: configure the port.
Go to IDX2: load the DOC metadata.
Go to SM59: Create RFC destination which points to R3 system this is require in the case where your IDOC is sent to R 3 system,
Configiration required at R3 side:
Maintain Logical System for PI (SALE transaction):
Maintain Partner Profile for XI system(WE20):
Thanks,
Kiran.

Inbound Extended Idoc, need to populate data into the segments

Hi Experts,
I am assigned with an assignment, where
IDOC: WGSREQ02
Create a FM with the following Parameters:
Export u2013 IDOC Number
Tables:
             i.      E1WGRK1
             ii.      ZRACEHD
             iii.      E1WGRP1
             iv.      ZRACE01
Get the data and populate the IDOC and generate an IDOC. pretty much new to idocs.
Please help me in coming out of this assignment. I would be very thank full to you if send me the sample code
thanks in advance.
Ram.
Moderator Message: Please understand that these are not Training Forums. Here you cannot ask for your work to be done by others.
Edited by: kishan P on Sep 2, 2010 12:23 PM

Hi Experts,
I am assigned with an assignment, where
IDOC: WGSREQ02
Create a FM with the following Parameters:
Export u2013 IDOC Number
Tables:
             i.      E1WGRK1
             ii.      ZRACEHD
             iii.      E1WGRP1
             iv.      ZRACE01
Get the data and populate the IDOC and generate an IDOC. pretty much new to idocs.
Please help me in coming out of this assignment. I would be very thank full to you if send me the sample code
thanks in advance.
Ram.
Moderator Message: Please understand that these are not Training Forums. Here you cannot ask for your work to be done by others.
Edited by: kishan P on Sep 2, 2010 12:23 PM

Why are my photos suddenly in JPEG format when taking them from camera card to IPHOTO - which then wont let me download into a file! Help been doing this for years and something has suddenly changed in the last 2 days to my camera? or IPHOTO??

I am away for a year and have been downloading pictures from my camera - a FUJIFILM EXR compact for the last 15 weeks into files on my mac using IPHOTO no problem...suddenly in the last 2 days I have tried to do this and IPHOTO opens the pictures ok but wont downoad them as they are now JPEG? have I switched something over inadvertently or what - help please!!!! many thanks

sorry maybe Im not making my issue clear...thanks for answering anyway:
over the last years- but 15 weeks specifically I have downloaded photos from my camers card- putting it straight into the apple mac and then opening IPHOTO then i am able to click and put the pics into my folders in IPHOTO but as of 2 days ago - the camera card went in, the pics opened BUT there is an error message which states iphoto cannot save them to file......as they are JPEGS
I can see that others too have had this issue and there are 'answers' but I am a complete novice and cannot understand the answers given and need someone to 'hand hold me' through a step by step this is what you must do....
so hope that now is cleared as to why there is a 'problem'
hope you can still help me thanks for you time

Combine Multiple SQL's of Same transaction into single SQL Transaction

Hi All,
I have a requirement where I have multiple changes happen to Same row which need to combined into one SQL
For example
Extract
INSERT Row1
Update Row1
Update Row1
Update Row1
Commit
On Replicat
Insert Row1
Update Row1
Commit
Is it possible to combine these 3 updates into 1 Update?
Thanks,
Vijay

Hi Mackbell,
We are dealing with cross company replication and we have multiple scenarios where client should not know what are the additional columns we do have . We don't want to have definition files at target, client can add additional columns to their table and we don't care about those. Similarly we don't want to send multiple updates to client, when I update a column which I don't that transaction should not go to client. If I am able to combine 3 updates to one on three different columns on single commit we can send 1 update instead of 3, this will also be layer of security for us. they can see trail files what kind of updates we do and over the network I can minimize number of transactions
Thanks,
Vijay

Payment Order (multiple) Idocs need to be downloaded into single file

Similar Messages

Maybe you are looking for