Payment to a terminated employee

Is there a way we can pay a employee a certain wage (not basic pay) after he terminates? I understand that we can create an IT267 and run an offcycle as of a check date.
Other than that, are there any other options? can this be done in regular payroll over several periods?
Thanks,
Lana.

Hi,
Try following.
Give payment to this employee through Infotype IT0015. If your wage type is permissible on IT0015. Then go and change the IT0003 (payroll status) for the field "Run payroll up to date". Make sure this date is current Payroll period  end date which you would be running the payroll for. Try and run the payroll now. I think you should be able to get the results.
Basically you have to take care of IT0003 before running the payroll.
Let me know if this worked.

Similar Messages

  • PRAA - Terminated Employee's

    Greetings fellow SAP'ers,
    We've been using PRAA as our standard for employee vendors from the HR master record for some time now.  When employee's are terminated and you run PRAA, you get the hard error whereas the employee is no longer active, so therefore no updates occur for that particular employee.  Our process is to use the Lock function for that employee once terminated. 
    My question is whether or not there is a setting we missed or an enhancement whereas when an employee is terminated in HR, then when you run the "update" process for PRAA, that it will block that employee based on the infotype for termination?
    Let me know.
    Thanks,
    Jim Steinle

    I think the locking process is looking for the following condition combination
      IF p0000-stat2 NE '3' AND t_code NE 'XK05'.
    where '3' is reflecting the employee status.  3 refers to 'active'
    where XK05 is the value of tcode your PRAA session will consider when you wanna lock an employee
      IF NOT del_a_p IS INITIAL.
    * lock A/P account
         t_code = 'XK05'.
    if one of those conditions is not met, you will get an error message like the one you referred to
    --> you can only run the lock functions for those employees that are not active and providing you have selected the lock option in PRAA
    FYI, we do not use the lock function via PRAA since there are usually lingering or late activities that can require a payment to a former employee.  If needed, AP will lock the vendors via their regular AP maintenance routines and not via a scheduled PRAA job based on employee changes

  • F110 - Payment Run got terminated

    Hi,
    Our session got terminated by basis due to some upgrade and the payment run got terminated in between.
    Now how to handle it? Do we need to reverse the payments made already and have to create a new one?
    Regds,
    Nand

    It was fast!
    When I try this, it give me error, but I think it is due to the authorization issue as in SU53 it shows the access missing for an activity.
    I will ask my basis team to give me that access.
    Regds,
    Nand

  • How to Attach a Payment Method to all employees automatically?

    Dear All,
    I have created a Payment Method (NACHA), this payment method has to be attached to all the employees?
    Is there any ways, Payment Method can be attached to all employees automatically?
    Or we should go to each employee and attach manually??
    Pls suggest me on this...
    Guru

    Hi Guru,
    As for NACHA, each employee would be having a different bank details, so you need to first create the data for employees, and then attach the payment method.
    By default you need not to attach personal payment method for each employee, as it by default it can take the values of default payment method defined in your payroll.
    But in case of NACHA, as bank details of the employees would also be needed, hence it is not recommended and you should use the API mentioned by vignesh.
    hr_personal_pay_method_api.create_personal_pay_method
    Cheers !!!
    SG

  • Person type and assignment status for terminated employee

    Hi,
    When I terminate an employee, is it possible to default the field "type" on "Person type and assignment status for terminated employee" section into another value? Its default values is: "Ex-Employee released".
    Thank you.

    Navigate to Work Structures -> Status and query for all rows with system status Terminated Assignment. select your required assignment status as Default. Untick the other default.

  • Terminated employees retrieval

    Hi All!
    I need to retrieve terminated employees without creating any FM on target system.
    As I understand, there is an identifier of terminated employee: infotype IT0000 has end date of '31.12.9999'
    How should I read this data from IT000? HR_INFOTYPE_OPERATION FM in not RFC-enabled. Are there any BAPIs of FMs that are RFC-enabled and capable to read this information?
    Thank you!

    thank you, will try it out

  • W2 process & Final Check for Terminated employee (Payroll)

    -- how to create a Final Check for Terminated Employee ?
    --- How are W2 processed?
    thanks

    Hi Arun,
    You need to delimit IT0588 sty 0001... . till 19.2.2014.... (i.e separation date)
    e.g
    Joining date 1.1.2010
    Termination date :- 19.2.2014...
    Delimit the info type with period as 1.1.2010 to 19.2.2014...
    Hope this should solve your issue...
    Regards,
    Veeram

  • Grant access to terminated employee's mailbox

    How can I easily grant access to a terminated employee's mailbox including deleted items? If I have the terminated employee's mailbox on litigation hold the deleted items are in the recovery folder, but can the recovery folder only be viewed through
    e-discovery process?
    Thanks!

    Hi Viper,
    Thank you for your question.
    We could run the following command to grant full access permission on terminated user:
    Add-MailboxPermission –Identity <terminated user> -User <your name> -AccessRights FullAccess –InheritanceType all
    If I have the terminated employee's mailbox on litigation hold the deleted items are in the recovery folder, but can the recovery folder only be viewed through e-discovery process?
    A: Yes, we could be granted only viewer to the specific user, we could refer to the following link:
    https://technet.microsoft.com/en-us/library/dd298021(v=exchg.150).aspx  
    Authorized users can perform an In-Place eDiscovery search by selecting the mailboxes, and then specifying search
    criteria such as keywords, start and end dates, sender and recipient addresses, and message types. After the search is complete, authorized users can then select one of the following actions:
    Estimate search results   This option returns an estimate
    of the total size and number of items that will be returned by the search based on the criteria you specified.
    Preview search results   This option provides a preview
    of the results. Messages returned from each mailbox searched are displayed.
    Copy search results   This option lets you copy messages
    to a discovery mailbox.
    Export search results   After search results are copied
    to a discovery mailbox, you can export them to a PST file.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Terminated employees assignment not being end dated

    Dear Gurus,
    I have terminated an employee and his status is shown as Ex -Employee but his assignment is not being end dated till the termination date. I dont know what is the problem? in fact is is even letting me open assignment form after the termination date where as in normal cases it does not even allows us to go to assignment form after the termination date.
    Help Please
    Muhammad Noman Shafique

    Hi Muhammad,
    There are 3 important dates on the Terminations form -
    Actual Termination date(ATD)
    Last Standard Process date (LSPD)
    Final Process date(FD)
    If all the above are the same, then you cannot navigate into the Assignment form, after the termination date. i.e. the assignment is end-dated as of the termination date.
    If the LSPD or FD are later than the ATD, then you can still navigate into the assignment form as the assignment is still active with a termination status.
    There is a special use-case, for the above scenario. Consider this -
    You have terminated an employee as of 15-Apr-2012 (ATD). Now you can process the employee payroll only till 15-Apr-2012, if all the above dates are the same.
    Now, if you want to process some elements like Termination-pay or Leave-salary, which you want to calculate at the month-end, then you can give the LSPD as 30-Apr-2012. And at the month-end you can process the payroll.
    Say, you want to process an element called commission or Extra-pay for a terminated employee, 6 months after his termination, then the Final process date can be changed to the month you want to process the element(If you see closely, the FD is the only date which can be amended on the termination form).
    So depending on your use-case, you need to enter the dates.
    Hope that helps.
    Thanks,
    Vigneswar

  • Visa Card upload for withdrawn / terminated employees

    Is anyone else having issues uploading the visa files for terminated / withdrawn employees?
    We are currently undoing the termination action, loading the file, then terminating them again.
    Any work around?
    Thanks,
    Dianna

    Hi Janhavi,
    For terminated employees I generally create a custom hiring action (e.g. X1) which includes only minimum infotypes that are required to be maintained for a terminated employee (including IT0001, IT0002, social security number). then I record an LSMW or BDC first running the X1 hiring action and then running the leaving action afterwards.
    Regards,
    Dilek

  • OTL Timesheet for Leavers - Terminated employees

    Hi,
    I am trying to enter timesheet for a leaver/terminated employee.
    When I query the employee it is not showing up.
    Any idea, if there is any profile option or anything to set up to view ex-employees?
    This is happening with all terminated employees.
    Kind Regards
    Bashir

    Dear Bashir,
    It depends upon a preference (Self Service Timecard Status that Allows User Edits - set it to Assignment up to Final Termination) and on the Final Process Date.
    Regards
    Giuseppe

  • Unable to find terminated employees

    Dear Gurus,
    We are facing following issues.
    Firstly
    Some of the users cannot see terminated employees. They can see them when they are active but not when they are terminated. We have customised responsibility for them and i think the issue is with the responsibility but we cant identify .
    Secondly
    Same Users can run their payroll along with the active employees (since all employees are in assignment set) but it always goes into error for terminated employees (gives formula error). When i run payroll of those employees with global responsibility then the run is completed and no error is faced. I cant understand what is the issue!
    Please advise experts,
    Regards,
    Muhammad Noman Shafique

    Dear Avinash ,
    It is a formula error. But strangely when i run it does not occurs and when the user with restricted resposibility runs it the payroll goes into error. The error occurs in the basic salary formula at line 52.
    But if it is a formula error then why does it not happens for me and occurs for the user?
    Regards,
    Muhammad Noman Sahfique

  • Massege to Terminated Employees

    Hi all,
    If the user will perform any  action like promotion and increment for the terminated employees by the time system has to generate one massege like the employee was teminated from the period.Please let explain me how could i resolve this issue.
    Thanks,
    KB

    Hi KB,
    AS per standard SAP, feature MSN20 is used for withdrawal which can be assigned to action.
    Path:- SPRO > PM > PA > Customizing procedures > Action > Set up personal action > personal action type > under column "check" give feature for action Termination > Then system will throw error/warnimg message based on your requirement.
    Then how to set error/warning to feature
    Path:- PE03 > MSN20 > create another feature which is copied from MSN21 > then under stat2 assign your employment status > give return value W(warning) or E(Error) based on your requirement.
    Hope this clarifies.
    Regards,
    Purnima

  • Pay out Terminated Employees expenses

    Hello!  We have had an ongoing problem with trying to pay out travel expenses to terminated employees.  When employees leave the company, 80% of the time, they have expenses in process.  Some of this is due to our direct bill credit card, and the data is imported into the buffer sometimes even after the employee leaves.
    So, our bus. process, is that the back-end in Accounts Payable finishes the expense reports.  However, sometimes we cannot get the repors to pay out through payroll (which is where we pay out all expenses).  Payroll has already tried to extend the pay through date, which was a good process.  But somewhere along - this was not good enough anymore.  I have two question - first - who else has a terminated employees process and pays through payroll?  next - what else can we try to change in the back-end (that can be a proces or  change to a program) that will allow these expenses to rest??
    Kindest regards
    Fabi

    Hi Prashanth,
    Once the Person is terminated, you cannot navigate to the Assignment form beyond the Final process date.
    Thre dates on the termination form are important -
    ATD - Actual term date
    LSPD - Last std process date
    FC - Final close
    If all the three are the same, then you cannot navigate to the assignment form after the termination date.
    If the LSPD or FC are different(always greater) to ATD, then you can navigate to the assignment form only till the FC date, but cannot amend any data, as you've already terminated the employee. All you can do is make some element entries and process payroll till FC date.
    For your case, why can't you reverse terminate the employee, make all the changes as you need and then terminate the employee as of the correct date ?
    Cheers,
    VB

  • Timecards of terminated employees

    Hi
    Is there a way to view timecards of terminated employees.
    Also what table stores this record
    hxc_time_building_blocks table does not show any record for a terminated employee
    Thanks
    Ninad

    Hi Dorianne,
    Are you using time evaluation? If yes check whether your time evaluation have triggered for any previous period for these employees. The most possible reasons are; you might have run any report / year end activity including the workschedule rule update (Possibly removed any holidays from the calendar rather restricting it for previous year) irrespective of the employment status.
    Regards
    Raviiiiiiiiiiiiiiiiii

Maybe you are looking for