Paypal Instant Pay Notification is doubling URL when sent

For months now, I have not been able to get any help out of Paypal. When a product is purchased, I have IPN set to on.IN the selling tools section, the following URL is used to return the IPN info:
Paypal IPN settings
Notification URL http://www.heritageseminary.com/paypal/ipn/ipn.cfm
Below is my config setup sent to payppal.
config.cfm
<cfset paypal["notify_url"]="http://www.heritageseminary.com/paypal/ipn/ipn.cfm">
When a payment is made, I receive the I am receiving the following error:
Please check your server that handles PayPal Instant Payment Notifications (IPN). IPNs sent to the following URL(s) are failing:
This is the URL that paypal is trying to connect with.
http://www.heritagesemianary.com/http://www.heritageseminary.com/paypal/ipn/ipn.cfm
When I check the IPN history, the status shows still trying.
When I click Message ID, I get the following address:
Notification URL http://www.heritagesemianary.com/http://www.heritageseminary.com/paypal/ipn/ipn.cfm
Any idea as to where I should be looking?

The config setting should perhaps be the relative path:
<cfset paypal["notify_url"]="paypal/ipn/ipn.cfm">

Similar Messages

Communication with PayPal - Instant Payment Notification (IPN)

Hello all,
I am currently trying to integrate "PayPal payment" in our CRM Webshop (B2B).
In order to notify the backend system, PayPal developed an "Instant Payment Notification" system which send a message to our server to notify that the payment was succesful or not. Our CRM server must then send an other message to PayPal to confirm that it received the payment notificationn. Then PayPal send a last message to the server and the payment can be confirmed.
This system is very nice, and PayPal documented it very well, but I can not find any documentation on the SAP side. I do not know which address I must give to PayPal to send me this notification and I do not know where to search to find this.
Does somebody have any idea ?
Thanks in advance.
Best Regards.
Gregory PIerre.

hi,
I am sure that you wont find any documentation by SAP about Paypal integration.
For example you have to create a servlet at J2EE engine which will be the endpoint for the Paypal communication or you can create a BSP application which will be the endpoint. At the Paypal webpage you will find some examples for the endpoint (of cause not for ABAP but I am sure you will find an example for Java).
I think your mainproblem will be that the Paypal communication is async.
Regards
Michael

PayPal invoice is showing up in French when sent to buyers.

I have been invoicing customers via PayPal for quite some time and today the customers informed me that their invoices are showing up in FRENCH! Help! None of my customers speak French! My business is in the US and I only ship to the US at this time so I only need English invoices! I have been looking for a solution to this issue all afternoon with no luck.

Wondering if you had a resolution to your problem of invoice showing up in French to buyers when you created it in English. I am experiencing same issue and could use some help.

PAYPAL INSTANT PAYMENT RECEIVED FROM Angelina Dave - Scam?

Hi.Just got this e-mail whith subject "PAYPAL INSTANT PAYMENT RECEIVED FROM Angelina Dave" from a sale I wanted to make. But there is no transaction pending on my PayPal account.The mail has transaction ID. Has the values but there's a Shipping Charge that I'm supposed to send back through Western Union. Is this some how strange?  Thanks!

CAN YOU NOT MAKE DUPLICATE THREADS AS IT IS UNFAIR FOR OTHERS WAITING THEIR TURN IN CONTRIBUTE, ALSO I NOW HAVE TO GO AND TRY AND GET RID OF THEM BY POSTING DUPLICATE THREAD ON EVERYONE !!!  THIS IS A TYPICAL PAYPAL SCAM.
They encourage you to use paypal and often ask you to send the item as a gift to a relative somewhere often Nigeria.
You will get/got a "fake" email that looks as though it is from paypal.....it isn't.
It will say the buyer has paid ...you won't have been paid.
They will tell you that the payment is released when you provide paypal with a tracking/shipping number......this won't happen. OR
If the item requires shipping they will tell you that they will pay you extra and you must pay the agent via western union / moneygram BEFORE the funds are released to you.
They are not interested in the item, they just want the western union etc funds and you will never see money in your paypal balance.
They also threaten legal action...have a laugh at that one and ignore it as its rubbish.
Paypal NEVER tell you to send trackable, they advise it for seller protection etc but it is not compulsory.
Paypal NEVER tell you to send an item before the payment is showing in your paypal account.
Paypal NEVER expect you to use a rival money transfer service.
                        ***************************************** I give up my time to help you so a thank you or kudos would be cool.
Marking one of my replies as a solution would be appreciated if I sorted your problem.

Iweb double-url is still showing even though I'm using a 3rd party host

A client of mine created and published a site in iweb.....she didn't even have hosting, so does iweb host files in the cloud? I deleted the site in her iweb app, changed the DNS, edited the domain file, updated to a 3rd party host, checked idisk, but im still getting the double-url (www.mysite.com/www.mysite.com/index.html/) crap that iweb does....it's like iweb is overriding everything else no matter what I do....there was an index.html file that was re-directing to the double-url, which i also promptly deleted...still no change....for the life of me I can't get just a normal URL (www.mysite.com) without having the additional url that iweb adds....I have no idea how to get rid of this....even with a fresh host, it still shows up.....anyone have any ideas other than scrapping the URL and finding a new one? I've never used iweb, but I've been doing web design for 5 years and i've never seen anything like this.....on a wordpress install, the URL works with the additional crap added, but there is some trouble when trying to set a 'home' link...I get a cgi-sys/defaultwebpage.cgi error....which is problematic....when trying to get back to the homepage.....

The iWeb Domain file is just a package where the website data is stored. Once the site is published, iWeb isn't in the picture...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
iWeb publishes a folder containing all the files for the website and an external index.html file. Unlike most websites, the index.html file is just a redirect to the Home page which is the one at the top of the list in the iWeb sidebar.
There's also a copy of the index.html file inside the folder. This arrangement is so that the site will work on Apple's - soon to be defunct - server MobileMe. Perhaps this is where you client published the site?
Its not quite clear how you are trying to conect the site to Wordpress. Can you explain?
If an iWeb site is published "as is", the URL for any page is...
http://www.domain-name/folder-name/page-name.html
... where "folder-name" is the name of the site in the iWeb app which can be seen at the very top of the left column above the first or Home page name.

Can I use Paypal to pay for Icloud storage?

Can I use Paypal to pay for Icloud storage? We are getting messages that we are exceeding the 5GB of free storage and need to pay for additional storage. I can use Paypal on ITunes but don't see that option with Icloud storage? What am I doing wrong?

The payment associated with your account is for all iTunes and App store related purchases. If you already have a valid payment method in place, you shouldn't be asked for one when you purchased additional iCloud storage.

How do I get rid of doubles of photos sent by an iPhone? When I try to trash them, I get the message 'locked' Thank you.

how do I get rid of doubles of photos sent by an iPhone? When I try to trash them, I get the message 'locked' Thank you.

Hi
Thank you for the reply.
No I have not deleted anything, this all happened automatically when the trial period ended.
Other than an old version of Photoshop (version 7, for which I do have a serial number, I don't have any other Adobe software - just the reader which is now not working)
I was trialling Dreamwever but couldn't get started with it so am paying someone else to set up the website using Wordpress.
David

Please add a notification of missed call when we disconnect a in coming call in iPhone

please add a notification of missed call when we disconnect a in coming call in iPhone

speed301 wrote:
I got my first bill that included a full month of usage. I had almost $100 of international data roaming charges because I left my phone on while I was at work in Mexico.
I'm reading a lot of stories about people going on overseas vacations and coming back to $1000+ phone bills from data roaming charges.
I understand the terms of my contract. I understand how much international voice and data roaming costs. I'd also have no problems paying for them if I used them on purpose. However, when you set up the iphone to use Yahoo mail it periodically checks it whether you want to or not. If you set up gmail on your phone then you have the option to manually check it. (If I'm wrong, please correct me).
The obvious solutions are to either turn off Yahoo mail or leave it in Airplane Mode and hope that airplane mode actually works.
Fortunately AT&T made an adjustment to my bill, so I feel a little vindication but I'm sure it can happen again if I'm not careful.
Somebody should fix this.
You can have a Gmail account and still set your iPhone to check at certain times and you will receive your mail.
As far as the "fix".. There is nothing to fix.. You're the one that would need to call at&t to "temporarily disable" your data while traveling out of the country. Unless, you call them to set you up on an International Rate for a monthly fee while you're away!

Instant smartphone notifications from bank?

You know what I'm talking about, right? You go into a store, buy something with your credit card, 5 seconds later you get a notification on your phone "Your credit card purchase for $5.56 at Duane Reade was approved". I love this feature so much. Works with automatic reoccurring online transactions too. Once a month I get "Your credit card purchase for $21.72 at MyFico was approved". I get this via the Capital One Wallet app. I love it so much. Works great in tandem with my YNAB budget...especially for those automatic reoccurring online transactions...I get the notification, enter it into YNAB...perfect budgeting. But, now that I have seen the light, I am missing it with my checking account! I know Simple has this feature with their app. But Simple doesn't work for me. I see Capital One has a new app, which is surprisingly a very nice looking app too. If it works the same way with their checking accounts, including 360, I will be very tempted to move my checking to them. Anyone have any experience? Or how other banks/checking accounts that do the same?

toothgrind3r wrote:
UncleB wrote:
Toothgrind3r, you got me to thinking about this, so I checked out my USAA app and the settings are pretty extensive for alerts, so I set the app to notify me for any Visa credit card transaction greater than $.01, and I lowered my checking account withdrawal setting to $.01 as well (previously $100). I've never used my debit card for a transaction above $100 so I've never had a debit transaction trigger my previous alert (I always use my credit card for the rewards) but now that the threshold for the alert is lowered I'll be able to see how well it responds to debit card activity. The unknown is whether a debit card purchase will alert upon authorization (I hope) or upon posting, but it will be easy to test out. For my purposes, if the new setting doesn't create alerts for the debit card upon authorization it will be of little use, since I check my account daily anyway. I can say from my experience last year with Wells Fargo email alerts, they weren't very timely. I was able to see a deposit by logging on to the website *hours* before receiving an email from them. I don't have enough transactions with Wells to warrant bothering with testing out their mobile alerts (I only use them to occasionally deposit cash or to get change when needed and generally keep a small balance). I'm thankful for your original post for making me think of tweaking and testing the capabilities of the USAA app! Let me know how it works out for you! Instant (or near instant) transaction notifications are awesome on so many levels Definitely will do! I had to edit my original post to reflect $1 instead of $.01, since USAA wouldn't allow me to put in an amount less than $1, but if it works as we hope it will (on debit auth) I can overlook that slight limitation. I should have an update in a few days at the latest

/102 u2013 401K wagetype calculated double amount when two hourly rates used

Dear Experts,
I have got an issue. Employee has been paid (us payroll) with two different hourly rates within a pay period in IT0008
i.e. For example: 01-sept-2011 to 14-sept-2011 is a payroll period in that 1-sept-2011 to 8-sept-2011 one entry created in IT0008 and another entry created from 09-Sept-2011 to 31-Dec-9999.
Now when the payroll ran for the employee in that pay period, /102 u2013 401K wage base amount calculated double amount in the RT. In all other payroll periods it is working fine.
Could you please tell me the reason why /102 wage type calculating double amount when two hourly rates mentioned in a pay period. Also please suggest the solution to fix this issue.
Thanks in advance
Regards,
Sreenivas.

Hi,
For few Union Deduction wts, following are the relevant PCRs found. Processing Class 76 is blank for Union deduction wts.
PCR - ZA00
Recurring payments/deductions and supple
    VWTCL 76   Processing class
        VAKEYPAYTY Payroll Type
            GCY ZCLM   With exact w.types
          A
          B
      1
        VAKEYPAYTY Payroll Type
          A
            GCY U111   With exact w.types
          B
PCR - ZCLM
      WGTYP?     Query wage type
          GCY U111   With exact w.types
6606
    NUM= ANZHL Set
    ADDWT *    OT   Output table
6608
    GCY ZUNN   With exact w.types
6609
    NUM=1.0    Set
    ADDWT *    OT   Output table
PCR - ZUNN
    AMT=& REGR Set
    NUM=& REGR Set
    DIVID ANR Division amt/no/rate
    NUM=2.5    Set
    MULTI RNA Multipl.amt/no/rate
    ROUNDG 100 Round AMT to next
    ADDWT&ZUNI VAR Variable table
    VAKEYZEINH Time unit in v.key
        VWTCL 47   Processing class
            VWTCL 10   Processing class
                OPIND      Operation indicator
                ELIMI A    Elim.time period ID
                WPBPC      for all WPBP
              0
                OPIND      Operation indicator
                ADDWT *    OT   Output table
Regards,
Sreenivas

How do I pay for my storage plan when I don't have a credit card? Last year I used an iTunes voucher but can't find that option this year. Please help!

How do I pay for my storage plan when I don't have a credit card? Last year I used an iTunes voucher but can't find that option this year. Please help!

Create an iTunes credit by redeeming a gift card and it will be charged to your credit. From http://support.apple.com/kb/ht4874:
"payment methods accepted include iTunes store credit, credit cards, and debit cards"

Firefox crashes instantly on startup. i double-click on the icon and i instantly get a crash report asking to restart or quit. if i hit restart another crash report instantly comes up. im not sure what t do here

firefox crashes instantly on startup. i double-click on the icon and i instantly get a crash report asking to restart or quit. if i hit restart another crash report instantly comes up. im not sure what t do here

See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.org/kb/Firefox+crashes

How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP server

In 9iAS 9.0.2 Oracle HTTP Server (OHS) is pre-configured to assign requests to the Home OC4J instance via the URL-prefix "/j2ee"/
For example, the TEST servlet under OC4J would be passed through OHS using:
http://urmachine:urApachePort/j2ee/TEST
whereas in the standlone OC4J version, this URL works:
http://urmachine:urOC4JPort/TEST
How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP Server?

It is getting the url prefix from mod_oc4j.conf
under /ora9ias/Apache/Apache/conf
You can read more on this at
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/web.902/a92173/confmods.htm#1008977
-Prasad

I need to create a Notification in CRM WebUI When we create a new contract

Hi Experts,
I am working in Utility Industry and as per the business requirement I need to create a Notification in CRM WebUI
When we create a new contract & click on apply button.
As per my knowledge we are not maintaining Notification information in CRM System. So could you please
help me to call IW52 during the new contract creation when we click on apply button.
Thanks
Roli

Hello Roli,
If your requirement is to launch Transaction IW52 after clicking apply button then you can use Transaction Launcher tool in CRM to integrate to CRM WebClient UI.
Calling Transaction Launcher on user action
BOR object or ITS based Transaction Launcher
Regards,
Ashik

How do I set up Firefox to remember urls when closing?

How do I set up Firefox to remember urls when closing?

Sorry, Right we don't have that option.
We have only clearing the cookies and history from the Settings button.

Paypal Instant Pay Notification is doubling URL when sent

Similar Messages

Maybe you are looking for