2012 to 2014 Upgrade Not Working

I downloaded the SQLEXPRADV_x64_ENU version of MS SQL Server (I am running the 2102 Version on a Windows 8.1 PC). When i ran the upgrade wizard it all ran ok -except that MS SQL 204 Server isn't there -the machine is still running the 2012 version
and I can't uninstall the 2012 version either as it says that my computer is running an older version of Windows.
Any ideas on how I can actually install the 2014 version?

Hi,
First please learn to post correct figures. From what you posted it seems you have SQL Server 2012 express installed and you want to upgrade it to SQL server 2014express. If it is correct then
1. You need to have SQL server 2012 patched to SP1 before upgrading from 2012 express to 2014 express.Please read supported
Version and edition upgrade matrix
2. Upgrade advisor does not upgrades SQL server instances it just tell you possible error which could come during upgrade. To upgrade you need to right click on SQL Server 2014 express setup and and select run as administrator. A new window will pop up on
it select maintenance and then edition upgrade then its choose edition you want to upgrade and few next..next and then it would upgrade. More details in
This Link.
PS: You need to first download SQL Server 2014 express edition.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Similar Messages

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

My PS CC 2014 dos not work. It starts up and then its stops.

Hi My PS CC 2014 dos not work properly. It starts up but stops wen i won't to work with it. wat is the problem

Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Exchange mail after iOS 8 upgrade not working

exchange mail after iOS 8 upgrade not working.
I can not get email from my exchange account.
Any suggestion?

Just had this issue. I turned WIFI off and it connected fine. Then turned WIFI back on and working as always.
It had something to do with the WIFI conflicting with the exchange server.

SCCM 2012 Software Metering is not working

SCCM 2012 Software Metering is not working in our environment. Other than software metering, reports work just fine.
I have created a few simple software metering rules with “Acrobat.exe” and “Outlook.exe”. Rules are enabled. Rules were on at least 6 months.
When I go to software metering reports, Month parameter value is empty and I can’t choose any value.
I ran runmetersumm.exe on our server, it did not work as intended. :
Summarizing data up to 0 hours old.
File Usage Summary added -1 rows in 0 seconds.
Monthly Usage Summary added -1 rows in 0 seconds.
I am stumped. Why would it add minus rows?
Any ideas how I can make software metering work on our environment?
Thank you

Finally figured it out.
mtrmgr.log did not find any rules when I ran executables. So I knew it wasn't working on the server side.
After searching for a while, I found the solution from the link below:
http://social.technet.microsoft.com/Forums/en-US/8f048512-c357-437e-89ec-cee5356a10b1/software-metering-reports-empty?forum=configmanagergeneral
1. Deleted RULECHG.RTA under policypv.box folder
2. Removed and recreated metering rules again.
Everything is working again now.
Thank you.
I do wonder how to avoid those problems going forward though.

HT4061 actually i bought iphone 4s in nov 2012 and now its not working properly as the screen goes black ....i lost the bill..is it possible to get another copy of the bill......

actually i bought iphone 4s in nov 2012 and now its not working properly and i lost my bill as well i want to request to get a copy of bill pls.....

You are not addressing Apple here. This is a user to user technical support forum. If you are having warranty issues with the phone, a copy of the bill is not necessary for Apple to check and evaluate the phone. If there is a manufacturer defect, they will deal with it.
What is "not working properly" on the phone. Maybe someone can help and it not be necessasry to be replaced.

SQL Express 2008 to 2012 express upgrade not working

I'm trying to upgrade an older version of SQL Express 2008 to 2012 by first upgrading to (what I think is) 2008 SP3 (10.0.5500.0).
The upgrade to 2008 SP3 says it has completed and the version of the browser and client etc are showing as 10.3.5500.0 but the SQL Server version is still showing as 10.0.2531.0 in the errorlog. When I run the 2012 install exe (11.0.2100.60) it is failing
on "SQL Server 2008 Service Pack 2 or later is required"
I'm not very experienced when it comes to SQL so any help would be appreciated.

You are probably using a regular version of SP3 to upgrade. Express edition has a separate download which included service packs.
Please download the appropriate package from this link, provide the same instance name which you want to upgrade (as if you were to install a new instance with that name) and setup will run in upgrade mode". It will apply SP3 on existing express instance.
http://www.microsoft.com/en-in/download/details.aspx?id=27597
Let me know if you need help selecting the right exe from the above link.
HTH
This posting is provided “AS IS” with no warranties, and confers no rights.
If this reply answers your question, please mark it as Answered for others to find it easily.
If this reply help you resolving the problem, please vote the post as Helpful.

Open-vm-tools 2012.03.13-2 not working on VMware Workstation 8.0.2

Hi,
I followed instructions on https://wiki.archlinux.org/index.php/In … _in_VMware.
Problem 1[Solved]:
vmware-user-suid-wrapper does not start automatically but i did add it to ~/.xinitrc.
.xinitrc File content:
exec ck-launch-session gnome-session
vmware-user-suid-wrapper
[Solution 1]
removed vmware-user-suid-wrapper from ~/.xinitrc and created this file:
/etc/xdg/autostart/vmware-user.desktop
[Desktop Entry]
Type=Application
Name=VMWare User Agent
Exec=/usr/bin/vmware-user-suid-wrapper
Icon=system-run
Comment=Enable Unity, DnD, etc.
Problem 2:
drag & drop is not working in GNOME standard mode (works in fallback mode), clipboard copy&paste is working. XFCE4 seems to be working OK.
Problem 3:
Unity is not working at all, I get the message that vmware tools are not installed.(Not working both in GNOME and XFCE4)
Installed Software:
Linux version 3.3.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120407 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 14 09:48:37 CEST 2012
open-vm-tools 2012.03.13-2
gnome-shell 3.4.1-1
Kind Regards,
Robert
Subject History:
<<First version of question>> I reverted to a minimal arch install snapshot and did a re-install of gnome,open-vm-tools. The glibmm-2.4 problems magically disappeared (somehow it was fucked up)
Hi,
I followed instructions on https://wiki.archlinux.org/index.php/In … _in_VMware.
3D Acceleration is working and GNOME does not start in fallback mode, however I can not get Unity, Drag&Drop and Clipboard to work.
open-vm-tools daemon is running. I have also added vmware-user-suid-wrapper to ~/.xinitrc.
I also tried to upgrade my whole system from the testing repositories, by doing this I get open-vm-tools 2012.03.13-2(release 2). With release 2 of the same tools clipboard is working but still no luck with drag&drop and Unity.
Im also trying to build my own version of open-vm-tools 2012.03.13-1(I would like to use it as a template to later build official open-vm-tools stable-8.8.2 package), but makepkg fails. I tried to add -fpermissive flag to CXXFLAGS in /etc/makepkg.conf but it doesnt help. Log trace at the end of this msg.
Installed packages and Software:
open-vm-tools 2012.03.13-1
GNOME 3.4.1-1
Linux version 3.3.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120407 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 14 09:48:37 CEST 2012
Thanks for you help. Sorry for the question but I'm a Widows n00b, trying to get a grip on Linux.I really like Arch, because I love control over my box.
Kind Regards,
Robert
libtool: compile: g++ -DPACKAGE_NAME=\"open-vm-tools\" -DPACKAGE_TARNAME=\"open-vm-tools\" -DPACKAGE_VERSION=\"2012.03.13\" "-DPACKAGE_STRING=\"open-vm-too$
In file included from /usr/include/glibmm-2.4/glibmm.h:89:0,
from /usr/include/gtkmm-2.4/gtkmm.h:87,
from copyPasteUIX11.h:49,
from copyPasteDnDX11.h:33,
from copyPasteDnDWrapper.cpp:30:
/usr/include/glibmm-2.4/glibmm/threads.h:209:10: error: field 'gobject_' has incomplete type
/usr/include/glibmm-2.4/glibmm/threads.h: In member function 'GMutex* Glib::Threads::Mutex::gobj()':
/usr/include/glibmm-2.4/glibmm/threads.h:206:28: error: 'gobject_' was not declared in this scope
/usr/include/glibmm-2.4/glibmm/threads.h: At global scope:
/usr/include/glibmm-2.4/glibmm/threads.h:264:3: error: 'GRecMutex' does not name a type
/usr/include/glibmm-2.4/glibmm/threads.h:273:3: error: 'GRecMutex' does not name a type
/usr/include/glibmm-2.4/glibmm/threads.h:320:3: error: 'GRWLock' does not name a type
/usr/include/glibmm-2.4/glibmm/threads.h:329:3: error: 'GRWLock' does not name a type
/usr/include/glibmm-2.4/glibmm/threads.h:464:9: error: field 'gobject_' has incomplete type
/usr/include/glibmm-2.4/glibmm/threads.h: In member function 'GCond* Glib::Threads::Cond::gobj()':
/usr/include/glibmm-2.4/glibmm/threads.h:461:27: error: 'gobject_' was not declared in this scope
/usr/include/glibmm-2.4/glibmm/threads.h: At global scope:
/usr/include/glibmm-2.4/glibmm/threads.h:517:12: error: field 'gobject_' has incomplete type
/usr/include/glibmm-2.4/glibmm/threads.h: In member function 'GPrivate* Glib::Threads::Private<T>::gobj()':
/usr/include/glibmm-2.4/glibmm/threads.h:514:29: error: 'gobject_' was not declared in this scope
/usr/include/glibmm-2.4/glibmm/threads.h: In constructor 'Glib::Threads::Private<T>::Private(Glib::Threads::Private<T>::DestructorFunc)':
/usr/include/glibmm-2.4/glibmm/threads.h:793:55: error: there are no arguments to 'G_PRIVATE_INIT' that depend on a template parameter, so a declaration of $
/usr/include/glibmm-2.4/glibmm/threads.h:793:55: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is $
/usr/include/glibmm-2.4/glibmm/threads.h:794:3: error: 'gobject_' was not declared in this scope
/usr/include/glibmm-2.4/glibmm/threads.h: In member function 'T* Glib::Threads::Private<T>::get()':
/usr/include/glibmm-2.4/glibmm/threads.h:800:26: error: 'gobject_' was not declared in this scope
/usr/include/glibmm-2.4/glibmm/threads.h: In member function 'void Glib::Threads::Private<T>::set(T*)':
/usr/include/glibmm-2.4/glibmm/threads.h:806:3: error: 'gobject_' was not declared in this scope
/usr/include/glibmm-2.4/glibmm/threads.h: In member function 'void Glib::Threads::Private<T>::replace(T*)':
/usr/include/glibmm-2.4/glibmm/threads.h:812:22: error: 'gobject_' was not declared in this scope
make[4]: *** [libdndcp_la-copyPasteDnDWrapper.lo] Error 1
make[4]: Leaving directory `/home/robertsi/buildpkg/open-vm-tools/src/open-vm-tools-2012.03.13-651368/services/plugins/dndcp'
make[3]: *** [all] Error 2
make[3]: Leaving directory `/home/robertsi/buildpkg/open-vm-tools/src/open-vm-tools-2012.03.13-651368/services/plugins/dndcp'
make[2]: *** [all-recursive] Error 1
Last edited by robertsi (2012-04-25 05:59:25)

So far there isn't a good systemd script for vmware-workstation-server yet, but it can be started manually with:
# /etc/init.d/vmware-workstation-server start
Though this doesn't check the box in the GUI, you can interact with the Shared VM's tab in the VMWorkstation library just fine.
Last edited by turnipcannon (2012-11-08 20:25:46)

Hi All, I just installed PS CC 2014 and Deleted PS CS6. I have a HUGE problem! The Liquify Filter on PS CC 2014 is not working. When the filter comes up, my photo is reduced to two color fields - bright turquoise and lime green! Can anyone help me? I

Hi Everyone,
I just deleted PS CS6 and installed PS CC 2014. I'm trying to use the Liquify Filter and it does not work. When I click on the Liquify Filter, my photo does not appear properly. The photo appears as two flourescent color fields - bright turquoise and lime green! Can anyone help me with this? Also, does anyone know if I can re-install Photoshop CS6?
Thanks!
Laraine

Hi Everyone....I figured it out. Strangely, although I had NEVER used Liquify in PS CC 2014....I just realized that in Liquify Advanced Mode that the "SHOW MASK" option was on by default! I unchecked SHOW MASK. Everything is OK. Whew! Tks!

Flash Player 10.2.153.1 upgrade not working on 64bit Intel-Mac in Safari 5.0.4

I feel robbed! I want to use my Safari.
The latest upgrade of Flash player does not work.
I don't even remember downloading it, it must've been an automatic update!
I can not play youtube videos nor can I play any games on Facebook.
Who knows what is not working in my Avid!! I have not been working on that lately.
The flash player still works on FireFox, but i have no intention on switching to that.
The first aid has been run a few times.
It will download the free flash player for Intel Mac and it says the install is successful, but it is not there.
I have CS4 and it never bothered or disrupted the free flash player before.
I uninstalled it just in case and nearly lost it! When I tried to reinstall Flash, it said my disc to was blank!
Luckily, a friend in the business of fixing computers was able to get that back! whew.
The flash player from the CS4 is showing up in a folder and will even open when clicked on, but it does nothing. It is version 10.0 r2.
When I go to the place where they say to "see what version of flash you have"
I just get that icon that says to "Get Adobe Flash player".
It down not show the suggested "missing plug-in" pictures.
Yes, I read there is compatibility issues with the 64 bit Mac, but it always worked before!!!
Help!! Please!!

So the Shockwave Flash plugin in FF is Installed and Enabled. That's why Flash Player is working and why you were able to see the Flash Player logo animation. On the other hand, evidently the Shockwave Flash plugin is either not Installed in Safari or if it is it is Disabled. And that is why it's not working and you can't see the Flash Player logo.
Yes, I know Flash Player can be Installed in any supported 64bit OS. Also I thot that the 64bit browser in Mac was the "default" browser and the "Compatibility layer" had to be used. Similiar to the PC IE8 or IE9, switching over to the Compatibility feature in the browser.
Do you need to activate the Compatibility feature? I have had other Mac users tell me that their problem was they were using the 64bit browser and found out they had to use the 32bit browser, so I thot it was something they had to do. I would think if it was automatic they would not have had to "do" anything. But like I said I don't use Mac so can only relate what they tell me.
With Safari on either of the test sites, no Flash Player version was displayed?
Look into the HD/Library/Internet Plug-ins/ directory and see if you have the below two files:
Flash Player.plugin, flashplayer.xpt
After that see if this thread is of any help: http://forums.adobe.com/message/2725949#2725949
Thanks,
eidnolb

CS6 serial number upgrade not working (win)

I've been using CS6 for a while now (got an upgrade from CS5.5) and I'm trying to install it on my second computer and suddenly the serial number isn't correct. I'm using the serial number from CS6 (i've dubble checked the box and online) and I can't figure out why it's not working.
Could it have to do with the product I'm supposed to choose? I've tried all off them with 6 in it and still NOTHING
Help please!

If you purchased an upgrade and it is askling you to choose the qualifying version, that would be the older version (CS5.5) that qualifies you to use the upgrade version. You will have to choose CS5.5 as well as provide the serial number that was used for CS5.5 when you activated it.

HT5037 iPhoto Library Upgrader Not Working Properly

I followed the instructions, but when i clicked 'continue' in the Library Upgrader to upgrade my older iPhoto library, the original message about how my iPhoto library needs to be upgraded popped up

What version of iPhot do you ave hat is gving you this message?
You say
am trying to upgrade the iPhoto library to transfer it to my new MacBook Air.
Instead move the libray to the MBA and upgrade it there using the version of iPhotot that is there - you can not upgrade it on the old system with the old version of iPhoto
And the library upgrader does not upgrade the library - it modifies version 7 and earlier libraries so that the new version of iPhoto can upgrade them successfully
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?

There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com

Windows 2012 Direct Access ISATAP not working

I just installed Windows 2012 Direct Access and it's working fine for my company's Windows 7 Ent clients. The only issue I can't around with is that ISATAP is not working on this box.
We want to be able to manage-out in our native IPv4 environment, the isatap A record has already been created and is resolvable to all client machines including the Direct Access server. Unfortunately, ISATAP still appears to be Disabled. Do we need to manually
set this to enabled apart from what I've already done?
PS C:\Windows\system32> Get-RemoteAccessHealth
Component            RemoteAccessServer   HealthState     TimeStamp            Id
Server               localhost            OK              1/31/2013
3:26:43 PM
6to4                 localhost            Disabled        1/31/2013 3:21:44 PM
Vpn Addressing       localhost            Disabled        1/31/2013 3:21:44 PM
Network Security     localhost            OK              1/31/2013 3:21:44 PM
Dns                  localhost            OK
1/31/2013 3:26:43 PM
IP-Https             localhost            OK              1/31/2013 3:21:44 PM
Nat64                localhost            OK              1/31/2013
3:21:44 PM
Dns64                localhost            OK              1/31/2013
3:21:44 PM
IPsec                localhost            OK              1/31/2013
3:21:44 PM
Kerberos             localhost            Disabled        1/31/2013 3:21:44 PM
Domain Controller    localhost            OK              1/31/2013 3:21:44 PM
Management Servers   localhost            Disabled        1/31/2013 3:21:44 PM
Network Location ... localhost            OK              1/31/2013 3:26:43 PM
Otp                  localhost            Disabled        1/31/2013 3:21:44 PM
High Availability    localhost            Disabled        1/31/2013 3:21:44 PM
Isatap               localhost            Disabled        1/31/2013 3:21:44 PM
Vpn Connectivity     localhost            Dis┌───────────────────────────┐4 PM
Teredo               localhost            Dis│Enter command number:      │4 PM
Network Adapters     localhost            OK └───────────────────────────┘4 PM
Services             localhost            OK              1/31/2013 3:26:43 PM
PS C:\Windows\system32> ping isatap
Pinging isatap.isat.com [192.168.1.214] with 32 bytes of data:
Reply from 192.168.1.214: bytes=32 time=1ms TTL=128
Reply from 192.168.1.214: bytes=32 time<1ms TTL=128
Reply from 192.168.1.214: bytes=32 time<1ms TTL=128
Reply from 192.168.1.214: bytes=32 time<1ms TTL=128

Hi,
Thank you for the post.
As far as I understand, ISATAP is not recommended for use as the IPv6 to IPv4 transition technology in DirectAccess in Windows Server 2012. With ISATAP disabled DirectAccess clients can initiate connections to computers
on the internal network, and the computers on the internal network are able to respond. However, computers on the internal network will not be able to initiate connections to DirectAccess for purposes of remote client management. If you want to be able to
remote client management, consider deploying native IPv6 for management servers that will connect to DirectAccess client computers.
Regards,
Nick Gu - MSFT

SSIS 2012 Script Task Debugging not working (VSTA Popup but no script displayed in IDE)

Hi,
I am trying to debug 2012 SSIS Package but for some reason its not working. Basically when I run package (64bit mode) it pop up Script IDE but never brings up Script (see below). Usually when debugging of script starts it should break execution at the code.
Anybody experienced this issue with SSIS 2012 ?
Thanks,
Nayan
Visit My Blog (Home of BI Articles)

Hi,
I am trying to debug 2012 SSIS Package but for some reason its not working. Basically when I run package (64bit mode) it pop up Script IDE but never brings up Script (see below). Usually when debugging of script starts it should break execution at the code.
Anyone has clue whats going on here?
Thanks,
Nayan
My Blog |
Convert DTS to SSIS |
Document SSIS |
SSIS Tasks |
Real-time SSIS Monitoring

2012 to 2014 Upgrade Not Working

Similar Messages

Maybe you are looking for