Payroll long
Hi,
In payroll log i m getting the error, Symbolic condition is unknown.
How to solved this issue. Pls let me know.
Thanks and Regards,
Revathi.
Hi,
Thank you very much Madhu sudhan.
I m getting the exact error,
If Income tax calculations
processing
The symbolic condition is unknown
Else, retro run
Pls let me know on this.
Thanks and Regards,
Revathi.
Similar Messages
-
Australia Payroll *Long Service Leave*(LSL)
Hi Everyone,
Just a quick question regarding Australian Payroll.
So currently LSL counts/activates once an employee reaches 7 years. Upon checking the LSLPR in PC_Payresult the years of service
seems to be calculating incorrect because upon checking the data specs IT41 it should be reading daytype Z2 instead of daytype 01.
I tried to check where is this 7 coming from it points me to P2RQ_LSLPR. But we have no access in production (very strict)
Do you guys have an idea where should I look regarding this LSL aside from P2RQ_LSLPR, I might be overseeing something in the big picture.
So upon running the PY, my LSL is counting is Zero.(CRT table)
Current date - 28.04.2014 = less than 7
Current date - 18.02.2002 = over than 7
PS: This is not a master data issue.
Regards,hello sikindar,
my 'deduction from date' is coming right i.e it calculates 10 yrs after date. But the problem is my Start date. As i mentioned my Deduction Start Date is taking the date on which i generate the Quotas. This problem is for all the leave types.
My requirement is that the employee accrues leaves right from day one (date of hiring). So my Dedcution start date shuld be the Date of Hiring. But its not happening that way. My deduction start date is coming as the date on which i generate my Quotas.
Am working on Negative Time Management. Pls gurus kindly help me resolve this.
rgds, -
Employment Status at Start of Payroll Period
Hi all,
I have a requirement where certain amount is to be deducted from all employees who work for even a single day in the month i.e. if the employee leaves the organisation in say April and his full and final settlement is being run in May, then this amount will be deducted for April and not for May.
I have made a rule to fetch the amount from Constants table. Within this i have used operation STATU to get the employment status from IT0000. But the issue is that the operation STATU gives the employment status of the employee for End-date of For Period. And hence I am unable to get the amount deducted for the final period (for April in the example quoted above).
Please help me to get the employment status at the begining of For Period. Or if there is some other way to do it, please help.
VKHi Michael,
We deduct Rs. 250 per employee per month towards certain fund. This amount is deducted as long as the employee is in service. In the month of leaving service also this amount is to be deducted. But in case final settlement for the employee is being run say 2 month after his separation, then the amount should not be deducted for the months after his separation.
Regarding your queries:
1. I want to run payroll for May with retro for April. The amount already deducted in April (For April in April) should remain as it was and for May in May, there should not be any deduction.
2. Since this can be done through reading employement status at the start of payroll period, I want to read the status at the start of payroll period (For Period).
3. This depends, there may be some cases where we need to run payroll long after employee has left service.
4. The amount is deduction towards certain fund which is fixed Rs. 250 per month till employee is in service.
Waiting for some positive response.
VK -
My bank (Chase) and my wife's payroll provider (ADP) say I can no longer pull our statements because of incompatibilities between Adobe Reader and Safari. The Apple site says it is not responsible for for 3rd party software. Adobe says go back to Safari 5.0. Apple dosen't let me download Safari 5.0; so what do I do. The bank had me download Chrome, and I can now download my statements. but what a pain. Any suggestios?
Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
UK Payroll - Absence history from old EE number to new one.
Hi,
I am supporting the UK payroll and I am wondering if someone faced transfering the sickness history from old personnel number to the new one.
The only option which I just came to is using the IT 0572 but this is really lots of work because of the diffrent sickness schemes used.
To described the situation. The EEs were made as a leaver on the old company and were hired with the new EE number on the new company.
The thing is that they need to keep the absence history to calculate the correct sickness entitlement.
Please let me know if you have any other solution which could be used and it is much more safier.
Thanks.
LenkaOK - what you need to do is this:
Erase the contact again from Contacts.
Now, go to Messages app, and start a new conversation. Begin to type the person's name who you deleted above. You SHOULD see it in your list, and to the right you SHOULD see an exclamation point with a circle around it. Click that - you now have the option to remove that contact from the SMS cache.
Go back and repeat until you are absolutely sure you no longer see his name in your list.
Now, do again but this time type the + key first. You will see all mobile #'s from your contacts along with all #'s in the cache. Make sure you don't see this person's # in there with the name Other.
Once you do both of these, the # has been purged from your phone.
Add the contact back, correctly, and it should work. -
Hello Friends: I have issues in UK Payroll PU12. Wage types in SAP are not going to Ceridian file. Mostly happening with IT0014 wagetypes. I noticed that if I generate the File layout in PU12 then the wage types are going to Ceridian file. However, not advisable to generate the FileLayout without Code changes in PU12. Is there anyway I can resolve this. Any help is greatly appreciated.
Hi - just had a new iphone4 delivered. I have also been waiting for about 3 hours now for activation. From what i have researched it can take anywhere between 1 and 48 hours to activate (seems a bit extreme in this instant modern world!)
If you are upgrading form an iphone 3G or 3Gs (like me) - apparently the simm activation is automatic after you have connected and synced from your itunes. So you shouldn't need to do anything.
There is a page on the o2 website that allows you to manually transfer to the new mini simm: http://swapmysim.o2.co.uk/simswap/swap/validatempn
But even this does not speed up the process, it can still take a while... I'll let you know how long it it eventually took. -
Report to track changes to infotypes prior to running the payroll interfac
wants a report to track changes to infotypes prior to running the payroll interface. The attached report looks like it should work but it returns nothing. Is there config that turns on "Track Changes": for select infotypes? If so, can they be activated for key infotypes so this report will run?
Name, Address, position, etc.
Not attendance and absence ITs.Hi,
IMG Personnel Management Personnel Admin Tools Revision Set up change document:
This node has three items:
Infotypes to be logged
Field Group Definitions
Field Group Characteristics
Using these three options you define which infotypes you wish to log, then which fields, then you define which groups of fields are to be saved. Click each link, or see the sections below:
Infotypes to be logged
Here you define which PA infotype numbers you require logging. Select New Entries and enter a transaction class (A for Pers Admin, B for recruitment), then enter the infotype number and save.
Field Group Definition
When changes are made to a logged infotype, the field contents before and after are recorded. This is the very reason for logging the infotype, but there is an overhead in performance and disk space used so it needs to be given consideration. Typically you will want to record fields that are pay relevant.
Using the field group definition, you specify which fields you wish to record changes in. When any of the fields in the group are changed, all the fields in the group are saved. You can use an asterisk to log all the fields of the infotype but this is not recommended for space and performance, also there are many fields on an infotype that you will not be using, that will be saved also. Ideally you will pick individual fields of the infotype and enter them like so:
The field group number is a freely defined number you allocate to the group, it will be used in the next step. For normal use, simply pick any number not already used in that infotype. All fields with the same field group number are recorded in the log, even if they have not changed.
Click New Entries and enter the infotype number, field group number and field names that you wish to record.
Field Group Characteristics
When you have set up the field group numbers, use the field group characteristics to activate the logging of those fields. You can also specify a supplementary field group; this means that the contents of another field group can also be saved at the same time, even though the contents have not changed. In practise it is not used much. Simply select new entries, enter the transaction class, infotype, and in the DocFieldGr enter the number you assigned to the field names that you want to store, then enter L for Long Term Documents (short are not supported)
The Audit Report
To access the report showing the logged infotype changes, use the HR report tree available from various menu paths, including:
Main Menu Human Resources Pers Management Administration Info System Reports - Documents Infotype change logged changes in infotype data. (RPUAUD00).
When you run the report, select the infotypes you require, and select and execute.
Cheers
Prasanth -
FI-TV Postings (PRRW) impact on payroll reports
Dear All,
We are at a seriously challenged after adopting PRRW posting process for travel expenses. Here is what the situation is....
Initially our UK client always had payroll posting processed for travel related amounts / wage types. Lately, after SAP released a NOTE for VAT calculation on mileage, we have adopted the travel posting (PRRW) process. In order to adopt travel posting for travel expenses, we have migrated all the travel wage types vs symbolic a/c's vs GL's to Travel config.
Example -
(Earlier)
Travel WT 1234 -
Syma/c G004 -
Exp GL 10100 (payroll posting)
(Now)
WT 1234 -
Syma/c +13 --- Exp GL 10100 (FI-TV posting)
WT 1234 -
Syma/c xxxx--- Bal GL xxxxx (Payroll posting)
The problem we are having is with SAP standard reports (Drilldown reporting of cost centers) for example, PC00_M08_DRL_COSTOBJ is no longer reporting travel amounts. This is because, this program uses cost center in the selection screen and always uses PPOIX & PPIDT of payroll posting (run id and run header). So in these tables, WT 1234 is mapped to Bal GL xxxxx which cannot have a cost element or cost center and hence these reports are broken with travel amounts permanently.
Are there any reports which pick data from both payroll posting tables and FI-TV posting tables OR are there any BadI's or etc that can be used for SAP standard reports.
This is a grave problem at the moment and hence I request for leads or inputs at the earliest please. If anyone using FI-TV POSTING for travel integrated with payroll, please can you share your comments about your pratices.
Thanks!
Edited by: Honcho De on Sep 8, 2009 7:23 AM
Edited by: Honcho De on Sep 8, 2009 7:23 AM
Edited by: Honcho De on Sep 8, 2009 7:24 AM
Edited by: Honcho De on Sep 8, 2009 7:24 AM
Edited by: Honcho De on Sep 8, 2009 7:25 AMHi,
Please find the links hope you it will solve your problem.
http://help.sap.com/saphelp_47x200/helpdata/en/26/fddaabb7dd11d194c600a0c92946ae/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/b6/cd9ec949e911d189060000e8322f96/content.htm
Cya
udayakumar -
Payroll implementation from legacy system - pl help
Hi friends ,
we are using legecy system for Payroll and PA,OM,FI we are using SAP .
Now we wanted to migrate to SAP Payroll .
Please let me know how to do it? my question is How to send legacy data into payroll ?How long project will it take ? approx...?
is there any SA standerd migration tools or methods ?Pl help
any documentation ?
Thanks,
Sunitha
EditHi ,
is that just as simple as that is it ?
How can i get the old payroll results ? I mean how can fill payroll results tables ?
How can format my legecy data to SAP readable ( formatting data into SAP payroll tables like CPF or Payroll )
Thanks -
Program name Report title
1. CACS00_PMNT_BLOCK_RESET Unlock Payment
2. CACS_PMNT_BLOCK_RESET Lift Payment Locks
3. CCARDEC_CHECK Check: Payment Card Encryption
4. CONTEXT_S_HR_PAY_CH_ABREH HR-CH: Context for Payroll Units
5. DFKZ2F00 FORM Routines FBZP/Payment Methods
6. EWUMPOHD_40 Payment Order History: Fill WRBTR and WAERS, HSWAE as of Release 4
7. EXAMPLE_PNP_GET_PAYROLL Example Program for Reading Payroll Results Using GET PAYROLL
8. F111CONS Constants for Payment Request Payment Program
9. F111MAIN Main Program of Payment Run
10. F111SFIE Data for the PR Payment Program: Field Groups
11. F111SINT Payment Request Payment Run: Structures and Internal Tables
12. F111SMAC Macro Definitions for the PR Payment Run
13. F111STOP Data Pool of Payment Run for Payment Requests
14. F111TYPE Types for Payment Request Payment Run
15. FITP_GENERAL_READ_TRVCC Read Characteristic TRVCC (Determination of Payment Method)
16. FIWTPY10 Withholding Tax at Point of Payment
17. H01PLOGA Payroll Log for Company Pensions
18. H01PLOGT Routines for Payroll Log
19. H02PLOG0 Subroutine Pool for International Payroll Log
20. H02PLOG1 HR-CH: Macros for Payroll Log
21. H02PLOGERR HR-CH: Error log: Payroll Switzerland
22. H03PLOG0 Subroutines Pool for Payroll Log Austria
23. H04PLOG0 Subroutines Payroll Log Spain
24. H06PLOG0 Subroutine Pool for Payroll Log (France)
25. H07PLOG0 Subroutine-Pool for Payroll Log Canada
26. H07PLOG1 Include H07PLOG1: Macro of Payroll Log Error Messages
27. H07PLOGA Include H07PLOGA: Payroll log functions for Absence Processing
28. H07PLOGD Include H07PLOGD: Payroll log functions for function ADDCU
29. H07PLOGE Include H07PLOGE: Payroll log for tax calculation and vacation pay
30. H07PLOGM Include H07PLOGM: Payroll log functions for - messages
31. H07PLOGS Include H07PLOGS: Payroll log functions for tax calculation
32. H08PLOG0 Subroutines Payroll Log Great Britain
33. H08PLOG0PBS Subroutines Payroll Log Great Britain Public Sector (HR PS GB)
34. H10PLOGC Include H10PLOGC - Constants for US Payroll Log Message Passing
35. H10PLOGO Include H07PLOGD: Payroll log functions for function ADDCU
36. H10PLOGP Payroll log messages for general payroll
37. H13PLOG0 Subroutine Pool for Payroll Log Australia
38. H14PLOG2 Include for SOCSO - Payroll Log
39. H14PLOG3 Include for STD TAX - Payroll Log
40. H14PLOG4 Include for Zakat - Payroll log
41. H16PLOG0 Payroll Log Subroutines for South Africa
42. H20PLOGA Payroll log subroutines for absence handling
43. H20PLOGE Payroll log for missing data (tables, infotypes, etc.)
44. H20PLOGG Payroll log for deductions
45. H20PLOGH Payroll log subroutines for hol. allowance and garnishment
46. H20PLOGS Payroll log for Norwegian specific tables (SCRT, RETT, RETP, ...)
47. H20PLOGT Payroll log subroutines for tax and employers contributions
48. H23PLOG0 Subroutinepool for Payroll Log (SE)
49. H23PLOG_CAR Payroll Log Subroutines for company car
50. H25PLOG1 Include for new Payroll log (Infotypes - Singapore)
51. H25PLOG3 Include for new Payroll log (Tables- Singapore)
52. H26PLOG0 Subroutine pool for Payroll Log - TH
53. H26PLOG4 Error Routines - Payroll Log
54. H27PLOG1 HR-HK: Payroll log data definitions
55. H27PLOG6 HR-HK: Payroll log common forms
56. H37PLOG21 Payroll log - Retrocalculation (old BRRET and labor debits)
57. H42PLOG6 Include for Payroll LOG Taiwan
58. H43PLOG0 Subroutine Pool for Payroll Log New Zealand
59. H99CMLI0 Cash Breakdown for Cash Payment Based on Payment Method
60. H99PLOG0 Subroutine Pool for International Payroll Log
61. H99PLOG6 Subroutine Pool for International Payroll Log
62. H99PLOGPF Subroutine Pool for Pension Fund Payroll Log
63. H99PLOGS Subroutine Pool for Payroll Log for Special Payments
64. H99PLOGT Subroutine Pool for International Payroll Log, Gross Part
65. H99PLOGY Subroutine pool for Benefits Payroll Log: International
66. H99UGSP0 Splits in Payroll
67. H99U_CONVERSION_CA Converting Cluster CA for Archived Payroll Results
68. H99U_PYINFTY_CC_XPRA Payroll IT: Main XPRA report for country grouping conversion in 4.
69. H99_DISPLAY_PAYRESULT_OLD Display Payroll Results
70. H99_FORMSTEMPLATE_PAYDIM_02 HR Forms: Template for Local Class (Payroll)
71. H99_FORMSTEMPLATE_PAYR_02 HR Forms: Template for Local Class (Payroll)
72. H99_SELECT_PERNR Select Personnel Numbers for a Payroll Process (PY)
73. H99_SELECT_PERNR_INTERFACE Select Personnel Numbers, Interface Without Payroll Driver
74. H99_SELECT_PERNR_PU12_GROSS Payroll number selection for payroll run and export
75. HARCALC0 Payroll accounting program Argentina
76. HARCKTO0 Payroll account
77. HARCLJN0 Payroll journal
78. HARLIBR0 Legal Payroll Payments Book: Law 20.744 Art. 52 - Forms version
79. HARLIBR1 Legal Payroll Payments Book: Law 20.744 Art.52 - SapScripts versio
80. HBPPLOG0 Payroll log Benfit Point
81. HBRCALC0 Payroll accounting program - Brazil
82. HBRCKTO0 Payroll accounts
83. HBRPAYR0 Payroll Monthly Report
84. HBRSALM0 Maternity Pay data sheet
85. HCNCALC0 Payroll Driver, Version China
86. HCNCDTA0 Preliminary Program - Data Medium Exchange for Several Payment Run
87. HCNCKTO0 Payroll Accounts China
88. HCNCLJN0 Payroll Journal China
89. HFICALC0 Payroll driver (Finland)
90. HFICDTA0 Preliminary Program - DME for Several Payment Runs (Finland)
91. HFICKTO0 Payroll Accounts
23. HFICLJN0 Payroll Journal - Finland
24. HFIIABP0 Batch Input for Vacation Bonus Payments Finland
25. HFILHPA0 Holiday Pay Accrual
26. HFILTVR0 Pay Scale Reclassification data for Parake employees
27. HHKCALC0 Payroll Driver Hong Kong
28. HHKCKTO0 Payroll Accounts
29. HHKCLJN0 Payroll Journal - Hong Kong
30. HHKCLST1 Payroll Results for Cluster HZ - Hongkong Payroll Projection
31. HHKCLSTR Payroll Results for Cluster HK
32. HHKCREC0 Payroll results check tool
33. HHKUREC0 Payroll results check tool: Generation
34. HHKUREC5 Payroll results check tool: Display
35. HIDCALC0 Payroll Driver, Version ID (Indonesia)
36. HIDCANN0 Payroll Annual Display
37. HIDCDTC0 Preliminary Program - Data Medium Exchange for Several Payment Run
38. HIDCKTO0 Payroll Account
39. HIDCLJN0 Payroll Journal
40. HIDCLSTR Display Payroll Results (Cluster IS) Indonesia
41. HIECALC0 Payroll Calculation Driver for Ireland
42. HIECDTA0 Preliminary Program - DME for Several Payment Runs (Ireland)
43. HIECDTB0 Preliminary DME Program for Separate Payment Run
44. HIECEDT0 Payslip - Ireland
45. HIECKTO0 Payroll account
46. HIECLJN0 Payroll journal for Ireland
47. HIECLSTR Display cluster IE (Payroll results Ireland)
48. HIEUDIR0 Create Directory for Payroll Results (Cluster IE)
49. HINCALC0 Payroll Driver, India
50. HINCANN0 Payroll Annual Display - India
51. HINCDTA0 Preliminary Program - Data Medium Exchange - Post Payroll - India
52. HINCKTO0 Payroll Account - India
53. HINCLJN0 Payroll Journal - India
54. HINCLSTR Cluster Display IN ( Payroll Results, India )
55. HINUULK0 INLK Payroll Tables T558B and T558C Upload
56. HINU_M40_FFOD Create DME (Print Payment advice note)
57. HKRCALC0 Payroll Driver, Version for South Korea
58. HKRCDTA0 Preliminary Program - Data Medium Exchange for Several Payment Run
59. HKRCKTO0 Payroll Accounts
60. HKRCLJN0 Payroll Journal South Korea
61. HKRCLSTR Payroll Results for Cluster KR (South Korea)
62. HKRPLOG0 Payroll messages South Korea
63. HMXCINO0 Payroll tax report
64. HMXCKTO0 Payroll account
65. HMXCLJN0 Payroll journal
66. HMXCLSTR Payroll accounting results (Cluster MX)
67. HMXUACTPBSF2 Subroutines for Change in Pay
68. HNZCALC0 Payroll Driver, Version NZ (New Zealand)
69. HNZCDTA0 Preliminary Program - Data Medium Exchange for Several Payment Run
70. HNZCEDT0 Editing Payroll Results (New Zealand Version)
71. HNZCLJN0 Payroll Journal International
72. HNZCLSTR Display Payroll Results (Cluster NZ) - New Zealand
73. HNZDLN10 Advance Pay Cluster(N1) Display and Deletion Program for New Zeala
74. HNZLDET0 HR-NZ: Employee Pay Details Report
75. HNZLEXC0 HR-NZ: Payroll Exception Report
76. HNZLSUM0 HR-NZ: Employee Payroll Summary Report
77. HNZUCDC0 Convert Payroll Results for Conversion to > 2 Decimal Places
78. HNZUCLR0 Payroll Results (RQ) - Original and differences from retro periods
79. HPHCALC0 Payroll Driver - Philippines
80. HPHCAWS0 13th Month Pay
81. HPHCDTA0 Preliminary Program - Data Medium Exchange for Several Payment Run
82. HPHCLJN0 Payroll Journal - Philippines
83. HPHCLSTR Display Payroll Results (Cluster PH) - Philippines
84. HPHCMP00 HR-PH: Advance Payment Multiple Runs
85. HPHUALR0 Payroll Results (PH) - Actual/most recent result for CRT
86. HPHUCDC0 Convert Payroll Results for Conversion to > 2 Decimal Places
87. HPHUCLR0 Payroll Results (PH) - Original and differences from retro periods
88. HTHCALC0 Payroll Driver, Version 9 (Thailand)
89. HTHCDTC0 Preliminary Prog - Data Medium Exchange for Several Payment Runs
90. HTHCKTO0 Payroll Accounts Thailand
91. HTHCLJN0 Payroll Journal - THAILAND
92. HTHCLSTR Payroll Results for Cluster TH
93. HTWCALC0 Payroll Driver for Taiwan
94. HTWCDTA0 Preliminary Program - Data Medium Exchange for Several Payment Ru
95. HTWCKTO0 Taiwan Payroll Accounts
96. HTWCLJN0 Payroll Journal Taiwan specific
97. HTWCLSTR Payroll Results for Cluster TN
98. HTWCTXW0 Tax Certificate Report & Media Form (Payday)
99. HVECALC0 Payroll accounting program (Venezuela)
100. HVECEDT0 Payslip and severance payslip
101. HVECKTO0 Payroll account
102. HVECLJN0 Payroll journal
103. IBKKARCHLOG_FIBA_ITEM Data Declarations for Archiving Payment Items
104. IBKKARCH_FIBA_ITEM Data Declarations for Archiving Payment Items
105. IBKKARCH_FIBA_ORDER Data Declarations for Archiving Payment Orders
106. IBKKCOGPAYMNOTE Public Constants of Payment Notes
107. IBKKCONPAYMNOTE Internal Constants of Payment Notes
108. IFIFMKAO IS-PS: Constant Declarations for Payment Requests
109. IHC_BCAREVPO_ALV01 List of Cross-Bank Area Payment Orders
110. J_1AF011 Payment Notice (AR)
111. J_1AF012 Payment Notice (AP)
112. J_1AINFK Inflation Adjustment of Open Payables in Local Currency
113. L0FVTI01 F4 Help for Incoming Payment Method
114. L0P02O01 PBO Module for Restricting Payments/Deductions
115. L3HKEU01 Long Service Payment and Severance Payment for Hongkong
116. L3HKFU03 Print function for EOY Payment, Hongkong
117. L3HKFU05 Print function for EOY Payment, Hongkong
118. L3NZ0U08 New Zealand Payroll Messages
119. L3TH0U04 Function to return the Begin Date and End Date for a given Payrol
120. LACC3U02 Check BAPI: Account, incoming invoice (Load Payable)
121. LACC3U03 Check BAPI: Account, incoming invoice (Load Payable)
122. LACCSU02 Derivation of Payment Flow from SD Document (Quotation, Order)
123. RPCOIFU6 Delete Interface Results forward using Payroll Area and Pay Perio
124. HFILTVR0 Pay Scale Reclassification data for Parake employees
125. LHRFPBS4U02 Derive Amount from Pay Scale group, Pay Scale level
126. LHRFPBS4U05 Read Pay Scale, Pay Area, Pay Groups from Corps or Corps and Grade
127. RHPAYSC0 Display Pay Scale Structure
128. RPIPSR00 Pay Scale Reclassification
129. RPISTLVP Pay Scale Reclassification due to change in job code
130. RPITIG00 Pay Scale Reclassification
131. RPITIGVP Pay Scale Reclassification
132. RPITUM00 Pay Scale Reclassification acc. to Age or Pay Scale Membership Per
133. RPITUMH0 Pay Scale Reclassification acc. to Age or Pay Scale Membership Per
134. RPLPSCJ0 Time Spent in Pay Scale Group (Japan)
135. RPLTRF10 Defaults for Pay Scale Reclassification
136. RPU510N0 Simple Pay Scale Increase for Wage Types Determined Indirectly
137. RPU510Q0 Pay Scale Increase for the Family-Related Bonus
138. RPUEHBD0 Table conversion: Valuation of Pay Scales for Statistics
139. RPUEMU00 Currency Changeover EMU for Pay Scale and Pay Grade Structures
140. RPUT510BPBS SAP-HR Belgian Public Sector : Generation of Pay Scales (T510)
141. Y0PXIRLPRANGE Upload Pay Scale Range
142. ZPMIRAS1 Program to Fill Pay Scales for Annual Salaries Table (T510N)
143. ZPMIRSC1 Program to Fill Pay Scale Group Table (T510)
144. ZT510LOAD Program to Fill Pay Scale Group Table (T510)
145. RPISTLVP Pay Scale Reclassification due to change in job code
146. RPUSADU0 Data Definition for Salary Calculation
147. RPUSALU0 Salary Calculation Subroutines
148. RPUSCC00 Compare Schemas
149. RPUSCCA0
150. RPUSCCA1
151. RPUSCCB0 Checkprogramm for Scheme (Belgium)
152. RPUSCCB1 Checkprogramm for Personnel Calculation Scheme's (Belgium)
153. RPUSCCC0 Schema Check for Payroll - Swiss Country Version
154. RPUSCCC1
155. RPUSCCD0 Schema Check for Payroll - German Version
156. RPUSCCD1
157. RPUSCCE0 Schema check for payroll - Spain
158. RPUSCCE1
159. RPUSCCF0 Check schemas for France ( generated by RPUGSC00 )
160. RPUSCCF1
161. RPUSCCG0
162. RPUSCCG1
163. RPUSCCH0 Schema Prüfungsprogramm - Ungarn
164. RPUSCCH1 Schema Prüfungsprogramm - Ungarn
165. RPUSCCI0
166. RPUSCCI1
167. RPUSCCJ0 Schema Check for Payroll Accounting - Japanese Version
168. RPUSCCJ1 Check Program for Schemas (Japan)
169. RPUSCCK0 RPUSCCK0hi Suresh,
thank u so much.
been searchin for this for some time.
Regards,
Hari Kiran -
Error while importing the Entries from Payroll
Dear Guru's
For the First time we are Import the Entries from Payroll , Request End with the Warning message
when i check the Out Put file lot of Errors
eriod Error Codes
EP01 This date is not in any open or future enterable period.
EP03 This date is not within any period in an open encumbrance year.
EP04 This date is not a business day.
DOHA COA Journal Import Execution Report Date: 21-APR-12 10:16
Concurrent Request ID: 424967 Page: 11
========================================================== Error Key ===========================================================
Period Error Codes
EP05 There are no business days in this period.
Unbalanced Journal Error Codes
WU01 Warning: This journal entry is unbalanced. It is accepted because suspense posting is allowed in this ledger.
EU02 This journal entry is unbalanced and suspense posting is not allowed in this ledger.
EU03 This encumbrance journal entry is unbalanced and the Reserve for Encumbrance account is not defined.
Flexfield Error Codes
EF01 This Accounting Flexfield is inactive for this accounting date.
EF02 Detail posting not allowed for this Accounting Flexfield.
EF03 Disabled Accounting Flexfield.
EF04 This is an invalid Accounting Flexfield. Check your cross-validation rules and segment values.
EF05 There is no Accounting Flexfield with this Code Combination ID.
EF06 The alternate account is invalid.
WF01 An alternate account was used instead of the original account.
WF02 A suspense account was used instead of the original account.
Foreign Currency Error Codes
EC01 A conversion rate must be entered when using the User conversion rate type.
EC02 There is no conversion date supplied.
EC03 A conversion rate type or an accounted amount must be supplied when entering foreign currency journal lines.
EC06 There is no conversion rate for this currency, conversion type, and conversion date.
EC08 Invalid currency code.
EC09 No currencies are enabled.
EC10 Encumbrance journals cannot be created in a foreign currency.
EC11 Invalid conversion rate type.
EC12 The entered amount must equal the accounted amount in a ledger or STAT currency journal line.
EC13 Amount is too large.
ECW1 Warning: Converted amounts could not be validated because the conversion rate type is not specified.
Budget Error Codes
EB01 A budget version is required for budget lines.
EB02 Journals cannot be created for a frozen budget.
EB03 The budget year is not open.
EB04 This budget does not exist for this ledger.
EB05 The encumbrance_type_id column must be null for budget journals.
EB06 A period name is required for budget journals.
EB07 This period name is not valid. Check calendar for valid periods.
EB08 Average journals cannot be created for budgets.
EB09 Originating company information cannot be specified for budgets.
Encumbrance Error Codes
EE01 An encumbrance type is required for encumbrance lines.
EE02 Invalid or disabled encumbrance type.
EE03 Encumbrance journals cannot be created in the STAT currency.
DOHA COA Journal Import Execution Report Date: 21-APR-12 10:16
Concurrent Request ID: 424967 Page: 12
========================================================== Error Key ===========================================================
Encumbrance Error Codes
EE04 The BUDGET_VERSION_ID column must be null for encumbrance lines.
EE05 Average journals cannot be created for encumbrances.
EE06 Originating company information cannot be specified for encumbrances.
Reversal Error Codes
ER01 A reversal period name must be provided.
ER02 This reversal period name is invalid. Check your calendar for valid periods.
ER03 A reversal date must be provided
ER04 This reversal date is not in a valid period.
ER05 This reversal date is not in your database date format.
ER06 Your reversal date must be the same as or after your effective date.
ER07 This reversal date is not a business day.
ER08 There are no business days in your reversal period.
ER09 Default reversal information could not be determined.
Descriptive Flexfield Error Codes
ED01 The context and attribute values do not form a valid descriptive flexfield for Journals - Journal Entry Lines.
ED02 The context and attribute values do not form a valid descriptive flexfield for Journals - Captured Information.
ED03 The context and attribute values do not form a valid descriptive flexfield for Value Added Tax.
Miscellaneous Error Codes
EM01 Invalid journal entry category.
EM02 There are no journal entry categories defined.
EM04 The value in the ACTUAL_FLAG must be "A" (actuals), "B" (budgets), or "E" (encumbrances).
EM05 The encumbrance_type_id column must be null for actual journals.
EM06 The budget_version_id column must be null for actual journals.
EM07 A statistical amount belongs in the entered_dr(cr) column when entering a STAT currency journal line.
EM09 There is no Transaction Code defined.
EM10 Invalid Transaction Code.
EM12 An Oracle error occurred when generating sequential numbering.
EM13 The assigned sequence is inactive.
EM14 There is a sequential numbering setup error resulting from a missing grant or synonym.
EM17 Sequential numbering is always used and there is no assignment for this ledger and journal entry category.
EM18 Manual document sequences cannot be used with Journal Import.
EM19 Value Added Tax data is only valid in conjunction with actual journals.
EM24 Average journals can only be imported into consolidation ledgers.
EM25 Invalid average journal flag. Valid values are "Y", "N", and null.
EM26 Invalid originating company.
EM27 Originating company information can only be specified when intercompany balancing is enabled.
EM29 You do not have access to this ledger and account combination.
EM30 This balancing segment value is not valid for this ledger.
EM31 This management segment value is not valid for this ledger.
** Batches listed under "Unbalanced Batches**" have not been imported.
Edited by: 912775 on Apr 21, 2012 1:00 AMHi Bharat17an,
Please provide the detail information when create the MySQL connection in your PowerPivot model. Here is a good article regarding "how to Use MySQL and Microsoft PowerPivot Together" for your reference, please see:
http://www.datamensional.com/2011/09/how-to-use-mysql-and-microsoft-powerpivot-together-2/
If this issue still persists, please help to collection windows event log information. It maybe helpful for us to troubleshoot this issue.
Regards,
Elvis Long
TechNet Community Support -
Error message while executing international payroll with schema x000
Dear Team,
I am getting the below error message while running international payroll with schema x000.
"Jump from DAYPR to detailed log
Incorrect generation of wage types"
Request forum members to help me on the same.
Thank you,
SrinivasHi,
Thank you for the reply please find below i reviewed all the below tables please gothrough and advice me if any i missed out.
1) T555E-Message Descriptions----
2) T551C-Period work schedule evaluation---
Grpg Period ws Description Start Date End Date Cntg Class
01 PWTC Period WS 01.01.1990 31.12.9999 1
3) V_551C_B-Valuation class for Periodic work schedule
Grpg Period ws Description start Date End Date Val.Classfor PWS
01 PWTC Period WS 01.01.1990 31.12.9999 1
4) V_t508A-Work schedule rule
ESG ES grpg for ws Holiday Text PSG WSrule St Date End Date
2 Salaried Employee TCD TC 01 TCWR 01.01.1900 31.12.9999
5) V_001P_H-Personnel Subarea grouping for Time Recording
Personnel area Personnel Area Text Personnel Subarea Pers.Subarea Ps Group
1100 JEDDAH 1110 MAIN OFFICE 01
6) V_T555Z- Time type Determination
Can you advice me on this what I need to maintain here
7) V_T510S-Time wage type selection rule
Tm.WT Dy Grpg No Wagetype Wage Type Long Text
54 01 001 1010 Basic Pay
Regards,
Srinivas -
Error While saging the payroll in assignment
Hi,
i am getting a error "APP-PAY-06153: System Error: procedure hr_entry.derive_default_value at step 6" while saving the assignment information after setting some payroll. can any body me help on this issue.
thanks in advance.Problem Description
When querying existing Assignments or creating new ones and then saving the form
(PERWSHRG 11.0.14), the following error occurs:
APP-06153 System Error Procedure
hr_entry.derive_default_value at step 6
Navigate -> People -> Enter and Maintain -> Assignments.
The error occurs regardless of which fields are changed (including fields
in alternate regions).
The error only occurs if datetracked prior to a certain date - in this case
23-MAR-2000.
Solution Description
In this case there were two links for an element, one with default values and
one without. The one without, had an effective_start_date of 23-MAR-2000. Once
this link was deleted and re-entered with a date in 1998, the error no longer
occures.
Also need to check that all elements which are set up as standard links have
default input values. -
ATTN: Oracle North American Payroll Customers:End of Year Phase 1 and Q3...
ATTN: Oracle North American Payroll Customers: End of Year Phase 1 and Q3 2007 Statutory Update Released!
Dear Oracle North American HCM Customer,
North American End of Year Phase 1 and the United States (US) Third
Quarter Statutory Updates (Q3), 2007 have been released!
US Q3 2007 Statutory Update patch numbers:
* R11i: 6155000
* R12: 6155000
*Note – FPK RUP2 is not required for the US Q3 2007 Statutory Update
End of Year Phase 1 (includes Q3 Statutory Update) patch numbers:
· R11i: 6133333
* R12: 6133333 (targetted for October 8th release)
We would like to make you aware of several important points. Please read
this entire note carefully.
1. US Q3 2007 Statutory Update highlights
2. End of Year Phase 1 highlights
3. Other Important Notes
4. Lifetime Support Policy: Coverage for Applications
5. R11i HRMS Product Information
6. Payroll Recommended Patches
7. HR Recommended Patches
8. Other Information
A. US Q3 2007 Statutory Update highlights
* JIT and School District Updates
* Miscellaneous Statutory Bug Fixes
Please see the readmes on Metalink for full details:
3rd Qtr 2007 US Payroll Readme for Rel 11i – Note: 458431.1
B. End of Year Phase 1 highlights
US:
* JIT/Geocode updates
* Annual Geocode Patch Released
o Patch 6117000 11i one-off released 04-Sep-2007
o Included in EOY Phase 1
o Readme Note: 456835.1
* Wage Accumulation
o Significant enhancement to the way the application
accumulates wages for reporting
o Joint project with Vertex to enhance processing of
reciprocity rules at state and local levels
o Changes within the Vertex engine allow for improved handling
of multiple work jurisdictions
o Provides users with the ability to control how work taxes
affect taxes at residence locations and if wages should be
accumulated at employee’s residence location
o Readme Note: 460678.1
o
Note:
Quantum 2.9.1 will be the pre-requisite for End of Year 2007 processing
Additional Updates included in 2.9.1:
o 5520588 – Resident State Tax Not given credit for Work State
County Tax Withheld (Lives in NY works where ‘local’ tax is
withheld)
o 5897764 - FIT W/H Should be 35% After $1M Supplemental Wages
even if Employee is Exempt
o 5937604 - Delaware state income tax is being over-withheld
on the second (and subsequent) supplemental payments in the
same pay period.
o 5730236 - YTD EI Deduction Stopped at 729.29 INSTEAD OF 729.30
Evergreen Forms:
The following forms are available from Evergreen for W-2s and 1099-Rs
· Blank perforated W-2 #5208 Window envelope 4444-1
· Blank perforated 1099-R #5179 Window envelope 6161-1
· Preprinted W-2 #5218 Window envelope 5151-1
· Preprinted 1099-R #7159-4 Window envelope 7777-1
**Note: This is the last year we will support the preprinted W-2 and
1099R. For EOY 2008 we will only support the pdf version of these two
reports that print on blank forms.
Customers can order forms at 800-248-2898 or go to www.evergrn.com
<http://www.evergrn.com>
RR Donnelley (formerly Moore) Forms:
The following forms are available from RR Donnelley (formerly Moore) for
W-2s and 1099-Rs
* Blank perforated W-2 (with printed instructions on back) -
LW28700BW (50 PK)
* Blank perforated W-2 (with printed instructions on back) -
LW28700B (2000 BULK)
* Blank perforated W-2 (blank on back) - LW28700BLANKW (50 PK)
* Blank perforated W-2 (blank on back) - LW28700BLANK (2000 BULK)
* Window envelope for W-2 - 7987E
* Blank perforated 1099R (with printed instructions on back) -LR4UPB
(50 PK)
* Blank perforated 1099R (with printed instructions on back)
LR4UPBBULK (2000 BULK)
* Blank perforated 1099R (blank on back) - L4UPBLANK (50 PK)
* Blank perforated 1099R (blank on back) - L4UPBLANKBULK (2000 BULK)
* Window envelope for 1099R - DW4ALT
Customers can order forms at 877-526-3885 – reference Oracle customer #
521836
Canada:
* Miscellaneous Bug Fixes
Mexico:
* Miscellaneous Bug Fixes
Please see the readme on Metalink for full details:
US 2007 Payroll Year End Phase 1 Readme Rel 11i Note 456990.1
US 2007 Payroll Year End Phase 1 Readme Rel 12Note 456991.1
MX 2007 Payroll Year End Phase 1 Readme Rel 11i NOTE.458559.1
MX 2007 Payroll Year End Phase 1 Readme Rel 12 NOTE.458566.1
CA 2007 Payroll Year End Phase 1 Readme Rel 11i NOTE.458561.1
CA 2007 Payroll Year End Phase 1 Readme Rel 12 NOTE.458563.1
C. Other Important Notes
US Check/Deposit Advice XML
There are some additional dependencies for this patch that were not
originally communicated. Applying the EOY Phase 1 patch first satisfies
these dependencies. If there is a need to apply this patch prior to
applying EOY Phase 1 we are exploring possible alternative
pre-requisites and will send out a notice late next week with more
information.
* 11i one-off Patch 6399100 released 21-Sep-2007
* R12 will be part of Release Update (RUP) 12.0.4
Oracle will de-support the Live Checkwriter and Deposit Advice for US
and Canada beginning with 2007 EOY Phase 1. Archive Checkwriter and
Deposit Advice will continue to be supported. What this means is that
new code changes and bug fixes will not be tested on the Live
Checkwriter and Deposit Advice. Additionally, enhancements made to the
Archive version will NOT be made for the Live version.
Desupport of Standard Tax Interface
Oracle no longer supports the Standard Tax interface. Taxes will
continue to be calculated and tax rate changes from the Vertex Data
Updates will continue. New code changes and bug fixes will not be tested
on the Standard Interface and we cannot guarantee that all functionality
will continue to work. Additionally, enhancements made to taxes will NOT
be made for the Standard Tax Interface. We strongly recommend that you
upgrade immediately to the Enhanced Tax interface.
Vertex Customer Café:
The Customer Café is a comprehensive online information source
specifically for Vertex customers. It’s easier than ever to get the
support and information you need to maximize your investment in Vertex
products. Some of the many benefits to using the Customer Café include:
o Access to monthly data download files, release bulletins, schedules
and considerations.
o Early notification bulletins, late rate notifications, and support
notices.
o Online Knowledge Center that provides quick answers to questions and
issues.
o Online inquiry submission
o Access to fully-indexed online documentation for all Vertex software
products.
o Easy access to Vertex software training information and registration.
To register for the Customer Café, just visit the Vertex website at
www.vertexinc.com <http://www.vertexinc.com/>.
Year End Information for Payroll:
Family pack K rollup 2 (5337777) is mandatory for R11i Year End and is a
pre-requisite for Year End Phase 1. This patch was released on Friday,
June 22, 2007.
The R12 RUP (12.0.2) is mandatory for year end for R12
For the complete R12 Payroll Mandatory Patch List see Metalink Note 386434.1
For the complete R11i Payroll Mandatory Patch List see Metalink Note
111499.1
<http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=111499.1
<http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=111499.1>>
For additional non-mandatory North American Payroll patches see Metalink
Note 74292.1
<http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=74292.1
<http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=74292.1>>
D. Lifetime Support Policy: Coverage for Applications
Important Reminder:
Please pay attention to the Oracle E-Business Suite Support dates for
your point release. Statutory or regulatory updates are not available
beyond the ‘Extended Support Date’.
11.5.7 came out of Premier Support in May 2007
11.5.8 will come out of Premier Support in Nov 2007
11.5.9 will come out of Premier Support in Jun 2008
Extended Support has not been offered for 11.5.7, 11.5.8 or 11.5.9
Premier and Extended Support include - Tax legal and regulatory updates
Sustaining Support Does NOT include new tax, legal, and regulatory updates.
For the full definitions of what this means to an 11.5.7/11.5.8 customer
please read the full fact sheet available at:-
http://www.oracle.com/support/library/data-sheet/oracle-lifetime-support-policy-datasheet.pdf
*NOTE: For 2007 Payroll Year End, minimally you will need to be on 11.5.9.
E. R11i HRMS Product Information
For the latest Oracle HRMS Product Family - Release 11i Information,
please see Metalink Note:135266.1
This page contains important information including:
* High Priority Alerts
* Mandatory Patches
* Family Packs and Minipacks
* Latest Legislative Data - hrglobal.drv
* Maintenance Pack Information
F. Payroll Recommended Patches
The Payroll recommended patch spreadsheet Metalink Note 74292.1 contains
additional features and functions.
G. HR Recommended Patches
The HR Recommended spreadsheet contains a list of patches needed to be
in compliance for HR Statutory reporting i.e. EEO-1, VETS-100 etc.
The spreadsheet is located on Metalink in Note number: 273196.1
H. Other Information
1. MetaLink - http://metalink.oracle.com <http://metalink.oracle.com/>
<http://metalink.oracle.com/>
MetaLink is a customer resource provided by Oracle World-wide Support.
The Applications section of Metalink contains all the latest product
documentation and documentation updates for Oracle’s products.
2. Payroll World
Payroll World is an email distribution list for North American Oracle
Payroll customers used to quickly disseminate information regarding
product updates, patches, and statutory changes. To be added to this
email distribution list, send e-mail to: [email protected]
<mailto:[email protected]>
Subject: Oracle North American Payroll World Contact Update with your
contact name, CSI number, and company name
3. Metalink Service Request profiles:
Please update all Service Request profiles on Metalink with any updates
to Database Version, Product Version, and/or contact information
Metalink->UserProfile button
4. Information for NEW North American Payroll customers:
A pamphlet is available for all North American Payroll customers
explaining Vertex, Payroll World, SIG's, etc.
The North American Payroll Handout document can be located in Metalink
Note 316077.1Chris,
If you are referring to (Patch 7395025 - Q3 2008 JIT SQWL UPDATE FOR R11I), then you can apply it on 11.5.9. Just make sure you have all pre-req. patches applied.
Note: 737173.1 - 2008 US Payroll Year End Phase 1 Readme Rel 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=737173.1 -
Report to find the actual retro date of payroll
Hi experts!
You know, every month user changes lot of data in Infotypes involving retro payroll. And SAP provide change log info type to check who changed, edited or deleted & when & from old value to new value: RPUAUD00 transaction S_AHR_61016380.
However with this report, we must manually check it. So it will take such long time for checking & verifying. Thus my concern is maybe there is a standard report provide all these information in another way, it's much more easier for us to check. I mean: when I choose PF9999, & infotype 14, 8 in Sep-11: report will show:
with IT8: it will list all change: who changed, when changing occurred, from value A to value B, the period of record: assuming pf is increased salary Basic: 1000 -> 1500 since 15-Sep & HRA allowance (1005): 300->350: since 1-Aug in Sep-11.
PF999
Wage Type 1000: old value 1000, new value 1500; user AAA changed on 14-Sep. Start date of change: 15-Sep
Wage Type 1005 old value 300, new value 500; user BBB changed on 10-Sep, start date of change: 1-Aug.
If the report is available, it really helps all of us alot. If anyone know, please share. I am really appreciated.
Regards!
Woody.Hi Woody,
You can easily create such a report yourself via Ad Hoc Query. Every infotype has a start date (BEGDA), end date (ENDDA), changed by (UNAME) and changed on (AEDTM). If these are not in your infosets, they can easily be added. You can enter these as selection and output fields along with the wage type amounts and other data fields. This may not pick up all retros, however, as other infotypes such as IT0001-Organizational Assignment, 0007-Planned Working Time, etc. will also create retros if changed in the past. You can create queries for these infotypes if you want.
If interested in individuals as to whether they had a retro calculation - report H99_DISPLAY_PAYRESULT will show all retros if an individual had more than one entry for a pay period. This report is viewed individual by individual.
Paul
Maybe you are looking for
-
My iTunes became corrupted. I tried to upgrade to a new version, but things only got worse. Some of the error messages I received: APSDaemon - Unable to locate component This application has failed to start because MSVCR80.dl was not found. Rinstalli
-
FAST, MEDIUM AND SLOW MOVING GOODS ANALYSIS
hai experts I would like to knowis there any way to find out fast , slow moving or medium goods . in sap b one 8.8
-
HT1695 my i phone not support wifi connection it was grey colour it was not active
Hi My i phone not support wifi connection it was grey colour it was not active please help me
-
DBA Studio, change date format
Hi, in the DBA Studio, con you tell me where and how can I chage the DB date format from dd-mom-yy to dd.mm.yyyy? Tank you.
-
Why does elements 13 crash and freeze while starting up while using windows 8.1
Have had problems with crashes and freezing up with both elements 12 and now elements 13. Thinking there are problems with Windows 8.1 and adobe premiere elements. Can anyone shed any light on this issue?