Payroll SG - Manual maintainance - SAP notes not available

Hi Gurus
Most of the items of Payroll SG are pre configured in the system like CPF rates.
My question is 'what we have to change/maintain into the system'
Thank you in advance

pc00_m99_cipe).
in this report we will be haveing option like automatic or manual like that check that one once
check the node Specifying Posting DATe
Edited by: Sikindar on Nov 11, 2008 11:32 AM

Similar Messages

Manually generate SAP Note queue in SNOTE

Hi!
I would like to know if it is possible to manually generate a queue of SAP notes in transaction SNOTE. Instead of importing one note after the other, I would like to generate a queue.
If this is possible, do you also know if SNOTE will determine the correct sequence of notes, and also if it will determine if there are any prerequisite notes for the notes I am importing?
Thanks.
Regards,
Thomas

Hi Olivier.
I am very familiar with support packages and SPAM, but thanks for the information anyway.
However, I don't see why being able to manually create short queues of notes is such a bad idea. After all, SNOTE itself automatically creates queues from time to time. Please see this link for information: [SAP Note Queue |http://help.sap.com/saphelp_nw70/helpdata/en/c3/0db13a95bed348e10000000a114084/frameset.htm]
-Thomas

HR payroll Components for India is not available in IMG in ECC 6.0 EHP4

Dear SAP HR Payroll expert
We have upgraded SAP version from R/3 4.6C to ECC 6.00 EHP 4
However, in our present ECC6 - we are now going for fresh Payroll Implementation for India.
We observed that in upgraded development client HR standard data is missing ,
where as this is available in standard development client 000.
following is the example of standard customization data.
1- Statutory compliance update is missing.
2- HR form Editor for India pay slip is missing.
3- Dynamic Action for India Taxation Infotype is missing.
Above mentioned are few examples.
Please note that both the client patch level is same. Kindly advice what to do, so that Standard HR data and table with ECC6 version is available in development Server,
Also we have activated business function components EA-HR , but system are not showing details for Payroll in India.
Please suggest
Vijay

Dear Vijay,
i am mohammed.
if MOLGA=40 is not existing then go to T.Code: SU3 in parameters Tab please give in Parameter ID=MOL and Parameter value=40
ans save and leave the transaction and check the system.
Regards,
mohammed
Edited by: 0mohammed1 on Oct 5, 2011 1:35 PM

Actions have to be done manually/ image size not available

i have a foder opened up in bridge , all photos selected, I go to tools/photoshop/batch/I choose my own action, web 1400, which includes reducing to 1400 px, reduce resolution, and saving to jpeg.
In set, i choose my own actions, source: folder, choose the original folder, destination:folder, create new folder,ok.
i have to do all the oks and saves by clicking manually, all in the end is fine, but that's odd.
OR FROM PHOTOSHOP/windows/actions; it just wont work all together; My action is called web1400, includes 3 commands::
2 image size (for reducing size, resolution) and save to jpeg.
I select web 1400, then I click the play icon (3rd from left) . that brings the selection down 1 step to image size and a window appears: image size is not currently available.

You should make sure that your printer is selected in Page Setup, rather than the generic Any Printer. You may need to look for it in Options... when you choose it in PowerPoint.

Under View Sorting Options the Manual sort option is dimmed and not available; how do I fix?

Under the View tab, Sorting Options, the Manual Sort is dimmed and not available to me; how do I fix?

In an album just drag the photos where you want them. Manual sorting is not available in smart albums
LN

Make slideshow in iDVD6: 'manual' option not avail. in 'slide duration'

In iDVD6, the 'manual' option is not available (it's "greyed out") when I look to choose 'manual' in the "slide duration" pull-down menu. I CAN (if I wanted to) choose "1" to "10" seconds, or even "fit audio," but for some reason the software is not allowing me to choose "manual." Any hints?

The manual option is available only if you don't have a sound track in your slideshow. If you have a sound track, remove it and the manual option will not be greyed out anymore.

Related to SAP Notes

Hi Folks,
1.Will there be a SAP Notes even for Script too or SAP will provide a new script when there is a change in the layout,say for changes in J1INCERT-CIN.
2.We are currently working on 4.7c and we generally apply notes as and when an error arises in a Standard transaction,by checking all the possible solutions like searching in SAP Market Place for SAP Notes availablity,if any.Won't SAP will notify all its customers regarding the SAP Notes to be implemented based on the version rather than we searching in SAP Market Place when an error arises.May be the query sounds crude but what I had experienced here is there are lot many SAP Notes that are pending and not implemented in my system and now we are finding it tough to collate
Kindly let me know,
Thanks,
K.Kiran.

Amit,
As there is a change in SAP Script Layout for J1INCERT we had copied the script and done the changes manually(as we are not aware of that there is a SAP Note available) both in the Script as well as the Program and it is fine.We had tough time in terms of allignment when changing the Script :-).
Kewl, the Notes even provides the Script.But how to open a file type of SAR.Gone through the notes 13719,seems we need to take the help of Basis Team.Nice if anyone here can provide me some info related to the downloading a file from SAP Note like SCRIPT.
Thanks alot,Amit for the information on "OSS:1046758,891923 for J1INCERT"
Any idea about the 2nd query?
Vivek,check the OSS notes mentioned by Amit.
Thanks,
K.Kiran.

KE5Z : UserExit or SAP Note for adding new fields in the report output

Hi,
I want to add 2 new fields in KE5Z (Profit Center: Actual Line Items) report output.
Order reason(AUGRU), Sales Document Type (AUART) fields.
Is there any UserExit or SAP Note available for this....
Thanks in advance,
fractal

Hi Fractal,
See if Note 92864 will help you.
Summary
Symptom
Through a modification, it is possible for you to include additional fields in the profit center line-item reports 'actual' and 'plan' (Release 3.1*).
Additional key words
KE5Z, KE5Y, RCOPCA02, RCOPCA08 -
SUPPORTGUIDE 20010613143936 -
REPORTWRITER,
SGRW_OM SGRW_PS SGRW_PC SGRW_SL SGRW_PCA SGRW_EC SGRW_LIS
Cause and prerequisites
The fields must be located in table GLPCA (for actual) or GLPCP (for plan).
For Release 3.0F, you should ensure you have applied Note 62511 first.
Solution
To include a field in the actual line item report, proceed as follows:
Call the ABAP/4 Dictionary (Transaction SE11) and display table GLPCA. You can then find in a line the field name and data element for the field you want to include.
Return to the initial screen of the ABAP/4 Dictionary. Now change the structure RPCA2. If the structure does not yet contain the field, you select Edit -> Insert field; enter the field name and data element. Do not insert the new field at the beginning of the structure but in the rear half of the structure.
Then save and activate the structure.
Now call the ABAP Editor (Transaction SE38). Change the source code of program RCOPCA02. Insert the lines set out in the attachment in FORM routine FIELDCAT_FILL. When you do this, replace SGTXT by the field name of the field. If you normally want the field to be displayed when you the access the report, delete the line afield-no_out = 'X'. "<<<< insert Note 92864 .
You should note that the place where you insert the lines influences the position of the column in the report list.
To include a field in the Plan-line-item report, carry out the same procedure except with table GLPCP, structure RPCA8 and program RCOPCA08.
Note: Pls check if these 2 fields are available in any of the layout versions you have available with the transaction.
Cheers,
Vikram
Pls reward for helpful replies!!

Sap not starting during manual failover testing

Dera friends,
We are performing manual failover testing between CI(sap central instance) and DB(oracle database)
the environment is ECC6.0 on AIX server
CI is running on one server and DB is running on another, during manual testing we have failed the DB, so now DB file systems has got mounted on CI server.
So when i log into CI with user as shown below (sid-irp)
su - irpadm
and the execute the command as shown below
irpadm 6> startsap
i get the following message
PRDCIXI:irpadm 6> startsap
tee: 0652-044 Cannot open /home/irpadm/startsap_.log.
Checking IRP Database
tee: 0652-044 Cannot open /home/irpadm/startsap_.log.
tee: 0652-044 Cannot open /home/irpadm/startsap_.log.
ABAP Database is not available via R3trans
tee: 0652-044 Cannot open /home/irpadm/startsap_.log.
Starting SAP-Collector Daemon
tee: 0652-044 Cannot open /home/irpadm/startsap_.log.
15:03:05 26.09.2008   LOG: Effective User Id is root
This is Saposcol Version COLL 20.94 700 - AIX v10.35 5L-64 bit 070123
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 1101932) is already running .....
tee: 0652-044 Cannot open /home/irpadm/startsap_.log.
saposcol already running
tee: 0652-044 Cannot open /home/irpadm/startsap_.log.
ABAP Database IRP must be started on remote server
===============================================
why am i getting this "ABAP Database IRP must be started on remote server" message.
What could be the cause for my database not comming up & why is it looking for remote server, when all the DB filesystems have got mounted on CI server (the server that has CI installed)
We are in a bad shape and the issue is quite crticial.
Your reply would be highly appreciated.
Regards
Ayush

> how can i check wether the directories are missing or not...
mount?
> Also how can i check it wether they are assigned to failover group or not.
Ayush, no offense, but I suggest you contact your AIX guy and check with him together. It's very cumbersome to write down command by command, get the outpu t back and you have no clue what you are doing. Again, no offense.
Markus

Product category not available error in SAP CRM 7.0

hi Gurus,
while i try creating opportunity transaction, there under product tab when i enter product category(as we maintian product category and not product) and pass on other data and finally press enter ..i get error "product category "3lAA" not available" same for other category. even when i try F4 help only very few categories it shows, not all.
but then i went back and checked for category and hierarchy in CRM system ..it is showing all there and it is downloaded form R/3 system.
Can you please tell me what all places i can check..? or what is missing ?
Thanks,
gaurav

Hi,
I believe all the categories which you are viewing currently in the pop up are from a single hierarchy ( Most probably R3PRODHIER). And the categories which you are looking for is probably from a different hierarchy ( R3MATCLAS, R3PRODSTYP etc.).
By standard, for sales applications only R3PRODHIER is supported. Please have a look at the IMG path Cross-Application Component->SAP Product-> Product Category->Assign Category Hierarchy to Applications, where you can verify this. If you are so particular about using categories from a different hierarchy you might need to change this setting - I am not sure about other implications that can cause if you change that like downloading from R/3 etc.
Regards,
Sreejith

System Type ERP not available while creating Buisness System For ECC in SAP Sourcing 9.0

Hi,
I need to import Master data in SAP Sourcing but when i am uploading master data i am getting this errror
Business system ECQCLNT340 does not match with local SAP Sourcing System ID SOURCING.
i have followed the steps in config guide of SAP ERP with SAP Sourcing.
when i am creating business system in SAP Sourcing system type ERP is not available.
i have also attached the error file, please check
--------------Version---------------
ECC 6.0 Ehp6
SAP Sourcing 9.0 on NW7.3 Ehp1 on IBM DB2
Thanks and Regards,
Murtaza Najmi

Thanks you Prasad,
this issue has been resolved and i have completed the installation part of SAP Sourcing and Contract generation.
Now , I am getting error while uploading clause document, my functional team member are not able to upload clause document. kindly suggest.
----------------------Error Description---------------
Login with buyer link into the system-> it has all authorizations
then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
Thanks and Regards,
Murtaza Najmi

SAP Authentication not available

Hello together!
on a BOE-System (XI 3.1, SP3, FP 3.5) is the SAP Authentication for the InfoView- and the CMC-logon not available. I think the problem is that they haven't installed the SAPJCO correct or did some other mistakes during the installation and configuration process. Until now I tried the following because to install and configurate the system new is not really a opportunity:
check if in the CMC the SAP Authentication is enable
check in the web.xml if the authentication.visible is set to true
copied the sapjco.jar into the Tomcat55\shared\lib and Tomcat55\common\lib
copied the two *.dll from the SAPJCO to the windows\system32 folder
set the classpath
redeployed the Apps: InfoViewApp, InfoviewAppActions, CmcApp, CmcAppActions, PartnerPlatformServices, SAP, OpenDocument and dswsbobje
run the partnercafinstall.bat
and restart the tomcat and the Server Intelligence Agent
Btw the Integration Kit for SAP works - it's just the problem with the missing authentication method.
Another question depending on that problem (maybe) regards the BW Publisher: There is a role for publishing content, this role have the essential rights and the role is added to the corresponding SAP system folder under the SAP structure in the CMC. But if you want to piblish a Crystal Reports report as a BW-User that is a member of the role but is not imported in the CMC you get the error EAS 30001(An error occurred when synchronizing folder hierarchy for role) which means that the user does not have sufficient rights to publish reports. If I put the role to the administrator group everything works fine except that the reports creates a folder structure SAP\2.0\*SYSTEM\New Object11552\New Object11553\REPORT*. Why are the folder "New Object11552" and "New Object11553" created and what's the problem with the rights?
I appreciate any hints what else I can do - because as I mentioned above a complete new-install is not really a opportunity.
Thanks in advance!

Thanks Heiko and Ingo for your responses!
@Heiko
Hi Heiko, I couldn't find the SAP JCO 2.1.9 version to download - so I tried the 2.1.10 version; but still the same problem
@Ingo
Hi Ingo,
>>so the SAP Authentication in the CMC is available and you are able to import the SAP Roles ?
yes, the SAP Authentication in the CMC is available and I'm able to import SAP roles - that works absolutely fine; it's just that users can't select the SAP-Authentication method for the logon.
>>EAS 30001
ok, that was also my idea that it is important that the sap user who want's to publish content is imported in the cmc - but because of the problem that the sap authentication is not available at logon that's currently not possible. So, I think if this problem is solved - the problem with EAS 30001 is also gone.
>>Make sure the role as descriptions in transaction PFCG in all the languages that you use for publishing
you're absolutely correct - that was the problem! Thanks Ingo! Could you explain what are the steps I have to do to translate the description of a role in transaction SE63 after I created the role in the transaction PFCG or do you have a link with the HowTo for me? Hope we'll also find a solution for the missing SAP-Authentication method.
Mario

Trasformation SAP BW 7.0 system "Copy" Functionality NOT available

Hi,
i started to work with a new SAP BW 7.0 system and i noticed that the copy functionality for the trasformation is not available.
In my previous project i worked on a system SAP BW 7.0 that had this functionality, i mean with right click of the mouse on a trasformation i had: display, change, copy, delete.
Now in the new system i have only display, change and delete.
I compard the patch levels of the two systems:
in the new system we have a SAP_BW patch level 15,
in the previous one i have a SAP_BW level 16.
Could be this one the reason?
Any idea?
Thx

Hi,
Should be yes..
Even we also have BI 7 with SP 7 and SP 18.
In SP 7 I dont have copy option. But in SP 18 this is there...
Siva

SAP templates use BAPIs not available in 4.7

We are trying to use the SAP module library templates for PP - We are running 4.7 and do not have access to BAPIs BAPI_PRODORD_GET_LIST or BAPI_PRODORD_GET_DETAIL, two of the BAPIs used in that template.
Any suggestions or help would be appreciated.
Thanks

If these BAPIs were not available in 4.7, then you would probably have to create them. But I was pretty sure the Production Order BAPIs were in existence then. You may want to post on a different board when some more savvy ECC folks would chime in. Are you sure you don't need the Process Order BAPIs? For BAPI_PROCORD_GET_LIST and its fellows were not released until ECC 5.5 (I think).
Regards and Good luck!
Mike

SAP GRC 10 SP13 PC- AM scenario not available for assigning to connector

Hello Expert,
We are on GRC 10 SP 13 PC . We want to add connector to AM connector group under SPRO-GRC_Common Componenet Setting - Integration framework - Maintain Connector and Connector types - Define Connector groups.
I remember all other groups ( AC related) which are available in this area are coming because of activation of BC sets. I have activated all the BC sets related to PC but AM group is not available.
Any Suggestion?
Kind Regards
Asheesh

Hello Asheesh,
AM Integration scenario is available in next path in SPRO.
SPRO -->GRC --> Common Component Setting - Integration framework -->Maintain Connection Settings
Regards,
Gowrinadh

Payroll SG - Manual maintainance - SAP notes not available

Similar Messages

Maybe you are looking for