Pb with generated files by com2java from SIEBEL

Hi,
I'm working on a connector between SIEBEL and JAVA.
I've generated file with com2java and my classe java that use these files raise
an exception :
C:\utils\testaccescom>java -classpath C:\utils\sappsrv.jar;C:\bea\wlserver6.1\jcom\lib\jcom.jar
testaccescom.testAcces
and the execution.....
Looking for BEA WebLogic 6.1 license...
BEA WebLogic 6.1 license found...
Trace : java.lang.IllegalArgumentException: Parameter {0} must be a single element
array
at com.bea.jcom.Variant.<init><Variant.java>
at SiebelApplicationProxy.getBusObject<SiebelApplicationProxy.java:126>
at testaccescom.testAcces.<init><testAcces.java:33>
do I use these correctly ?
excuse me for my english....(from paris :))
[testaccescom.zip]

Have you created Internal IO?
Have you mapped the IIO with WSDL's External IO that is generated out of WSDL?
Have you changed the output of the above map in-par with the input parameter of the BS created out of WSDL?
Check whether these steps are correct. If you find difficulty, let me know
Cheers
PR

Similar Messages

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

Difficulty with recieving files through bluetooth from others

you need to help me... PLEASE
I'm having difficulties with receiving files from others via bluetooth. I've tried pairing, but its not working.
When i go to media for the "receive using bluetooth" option all it does is display "file transfer-waiting for connection" message.
i can send things to people, but not the other way around,
PLEASE ASSIST!!!!

Hi and Welcome to the Forums!
See this KB:
KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones
Substitute, in the KB, the appropriate instructions for your other device in place of the KB section for the sending device. Do not skip the "Receive Using BT" step on the receiving BB...nothing will transfer if you do. Also do not skip initiating the send on the sending device -- you said nothing about that, so I must assume you did not do that step.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there any way to remove my hard drive with backup files in it from the exclude these items from backups???

I currently have a MacBook Air and a 1TB external hard drive, and I run my iPhoto Library from the EHD and as well have TM backup my computer to that same HD. The problem I have is that I don't have a backup of that HD which has all my photos and other media, so If the HD takes a crap I can be in big trouble.
So what I did is I purchased a new HD (My Cloud from WD) to back up my EHD. While setting everything up I ran into this
TM included the EHD in the "Exclude these items from backup" list and I can't touch them, and I tried everything. I later found this
The last sentence of #3 states why I can't.... Since the EHD has a backup file in it, it is excluded.
So..... Does anybody have any idea of a way around this? Would I have to restart everything and set it up different? Or just have a better and easier way of doing this?? I'll appreciate any help and suggestions.

What you need, is a dedicated image restauration filter that recognized the regular frequency pattern superimposed onto the prints. You can do this in advanced Image processing packages that let you compute the fourier transform of the image and then suppress or attanuate the frequency bands of the artefact with a band-stop filter.
But neither Aperture nor PhotoShop have this kind of filter. In Aperture and Photoshop you can only soften the effect by blurring and then exporting a smaller version of the image.
The algorithm that your scanner uses is probably the best that can be done, even if the resolution is only 100 dpi.
Do you still have the negatives? Scanning the negatives at a high resolution may give you better results.
Regards
Léonie

Problems with ps files to destiller from Indesign CS3

Hello out there
I have som problems when I save ps files for ferther work in destiller. It appears small lines from priceboxes that are grouped together in my dokument over pictures. This only appears when I save through postscrip and destiller and not when I save directly to pdf. Shore I can save to pdf but when you have to save over 400 pages its much easaer and quicker with destiller. Please someone can you help us.
Lotta

What you're seeing is stitching from the transparency being flattened. It is unavoidable when you have transparency and print to postscript. It shouldn't print to a hi resolution device such as press but export is the preferred method for PDF creation.
Bob

Issues with coverted files of captivate from CP2 to CP4

Hi Adobe,
We have a captivate files made using CP2 and saved it as CP4 and published it for Flash8, AS2 and SCORM 1.2.
This a multi-sco course and each SCO had one CP file
1st CP file contains the simulation with few self-checks in it and the
2nd CP file contain the assessment questions.
When we tested it on the Docent LMS the following issues were identified.
1.      for 1st CP file à The bookmarking is not working
a.      Bookmarking worked fine until the course was not completed. But after completion of the course bookmarking did not work properly. Since we have multi SCO structure the leaner can revisit the completed SCO.
b.      The course did not mark as completed on the LMS on the first attempt but on 2nd attempt it did.
c.      If the course is again launched after completion and the Rewind button is clicked or slider is dragged the course gets marked as "incomplete" on the LMS and does not get changed to complete even after the last slide is viewed and we were not able to re-enroll again.
d.    The interactivities built using the inbuilt captivate templates (MCSS/MCMS/True-False) can not be re-attempted.
2.      For 2nd CP file – Score value does not get properly recorded on LMS
a. The LMS does not record the accuracy value on the LMS, due to which the completion status does not get fired.
b. If we launch and exit the module without attempting any of the questions then a Failed status is sent to the LMS. Is this something that can be resolved using the Captivate publish settings?
b. Even when the bookmarking is set to false, when the assessment is re-launched, the starts from the bookmarked position and are not able to go back to reattempt from the beginning.
Can you guide us on how we can overcome these issues.
Thanks
Regards,
Siddharth Lodha

Thanks for the reply, Bartok, but those didn't seem to work for me. Maybe I applied them incorrectly as that thread was for the Win platform and not Xcode and I might have translated the solution poorly.
Basically I went to the "Release_Cocoa64" target, and scrolled down the "Build Settings" page. I then edited the BOOST_PREPROCESSOR_DEFINITIONS field.
First I tried just appending BOOST_SYSTEM_NO_DEPRECATED.
Second I thought that this might be a macro of some sort so I tried $(BOOST_SYSTEM_NO_DEPRECATED).
Finally, I deleted all the previous values and added "BOOST_ALL_DYN_LINK BOOST_REGEX_USE_CPP_LOCALE BOOST_REGEX_RECURSIVE BOOST_HAS_ICU=1 BOOST_ FILESYSTEM_VERSION=3 BOOST_CHRONO_HEADER_ONLY BOOST_SIGNALS_NO_DEPRECATION_WARNING".
As you might guess from the experimentation I got none of these to work. The error that I was getting has remained exactly the same.
One difference that I assumed between the Win and Xcode version is that Win separates the values with a semi-colon whereas Xcode separates with a space.
My only other thought is maybe I edited the wrong field. Is BOOST_PREPROCESSOR_DEFINITIONS the one?
As a final comment, the thread you gave me and my issue really comparable? I have other projects that don't use the boost::regex libraries and they build and run without issue. It's only when I try to use boost's regular expressions in a release build that I get problems when linking (debug build is still fine).
Also the link error looks different. The thread that you gave me points at "boost::system::error_category" as not being resolved, while I have problems resolving "boost::re_detail::get_mem_block".
I don't seem to have problems with basic boost - just the regular expression stuff.

Missing Audio / Sound in imovie with .AVI files when imported from iphoto

fortunately i don't need this answered, eventually figured it out my self, just thought it would be helpful to share the solution to this problem as I'm sure others have experienced it. The problem makes more sense when explained chronologically.
My wife has a Casio digital camera, and had recorded many Movies on it, they all sat in iPhoto all worked fine until i upgraded to Quicktime 7.5, then the audio disappeared. i tried in vain to fix (reinstalled QT 7.5, removed plugins, reinstalled etc.), but to no avail, so i left it - this was all under Tiger, i decided I'd upgrade to Leopard and see if the problem went away.
Before upgrading to Leopard i got iLife 08, when i first launched iMovie08 it pulled in all the movies from iPhoto, but they too had no sound.
Then i upgraded to Leopard, now the quicktime missing audio issue got fixed, so i could hear the audio again when launching quicktime via iPhoto (turns out the issue was with how quicktime was handling adaptive PCM audio stream) - i expected all would be fine in iMovie... but it wasnt.
after much experimentation i realised that i had to force iMovie to re-import all the video from iPhoto, this fixed the issue, but with no obvious way to do this, this is what i did:
- opened finder, navigated to iphoto library, right click and chose 'show package contents'
- navigated to the data folder and did a search on this folder only for all movie files (when imovie had originally converted iPhoto movie files into thumbnails it dropped all the thumb size movie files in this folder)
- deleted all the movie files from the Data folder, making sure not to delete the movie files in any other folders & emptied trash
- launched imovie, now all the iphoto movies were missing.
- re-launch iPhoto, whilst holding down shift, option + command keys
- checked 'rebuild the iphoto library database' only, once done, closed iphoto
- re-launched imovie, this forced it to re-import all the movies from iphoto
... and then the sound was back.
FYI
this worked when using...
OS 10.5.4
QT 7.5
iMovie 7.1.4
iPhoto 7.1.4
jb

Hi MGW,
I do not no how things are handled when using HDV and technical documentation is hard to find on this topic of how photo are handled using HDV but in iMovie and most non HDV video editing software the picture is always 72ppi regardless of what is was/is on the outside and the images that appear the worst are the ones with less.
On a side note I don't use iPhoto because of all the superfluous files and thumbnails it creates and it disorganises my photos according to criteria that is completely irrelevant to me. I have had these thumbnails pop up in the browser in the past primarily with any photos that existed in the library prior to any updates. With what I have been working on as of late can understand how and why this could happen.
If you scroll through the media browser dose it appear that the library you are working with duplicates itself somewhere along the line or do you see double images side by side?
What are you machine specs and please include you screen/display size and graphics card information as this is the most relevant information at this point with what you are doing.
W1

How can i receive event in calendar with joined files or note from outlook

When i create an event in outlook 2010 with notes and joined files , i receive then event but no notes and no files .
Do you have any ideas ?
thanks.

When the iPad is connected to your computer's iTunes, then on the device's Info tab you should be able to select where to sycn a calendar from - from the iPad manual :
You can sync calendars from applications such as iCal on a Mac, or from Microsoft Outlook 2003, 2007, or 2010 on a PC. (On a Mac, you can sync calendars with multiple applications. On a PC, you can sync calendars with only one application at a time.)

K8N (MS7220&MS7125) ISO with bios files for flashing from cdrom

============================================================================================
MS7220
============================================================================================
I made a bootable cdrom ISO with different bios files for easy flashing of Diamond Plus
without the need of a floppy drive.
Nothing modded , just collection of MS-7220 Diamond Plus bioses on one bootable cd for conveniance.
Burn ISO (unzip first) and reboot PC with CDROM as 1'st boot device.
A menu tells what to key:
1,2,3,4,5,6 or 7 followed by enter.
Menu looks like this :
+--------------------------------------+
Press 1,2,3,4,5,6,7 followed by enter
to flash with desired version
+--------------------------------------+
1 = MS-7220 bios 1.0
2 = MS-7220 bios 1.1
3 = MS-7220 bios 1.2
4 = MS-7220 bios 1.22
5 = MS-7220 bios 1.33
6 = MS-7220 bios 3.09
7 = MS-7220 bios 3.0A
R:\>
Pressing 1 will flash with following command
afud408 a7220nms.100 /P /B /N /C
Pressing 2 will flash with following command
afud408 a7220nms.110 /P /B /N /C
Pressing 3 will flash with following command
afud408 a7220nms.120 /P /B /N /C
Pressing 4 will flash with following command
afud408 a7220nms.122 /P /B /N /C
Pressing 5 will flash with following command
afud408 a7220nms.133 /P /B /N /C
Pressing 6 will flash with following command
AFDOS404 A7220NMS.309 /B /C /P /N
Pressing 7 will flash with following command
AFDOS404 A7220NMS.30A /B /C /P /N
Link:
http://members.lycos.co.uk/olsen0423/MS7220
File : 7220_batch_14-45-Okt-07-2006.zip
============================================================================================
MS7125
============================================================================================
To whom it may Concern.
I made a cdom ISO for MS-7125 board also.
Menu looks like this:
1 = MS-7125 bios NCG 1.C (W7125NCG.1C0)
2 = MS-7125 bios 1.D murdok mod (7125XMOD.1D)
3 = MS-7125 bios 1.D Syar mod temp disabled (W7125NMM.1D0)
4 = MS-7125 bios 1.D MSI regular (W7125NMS.1D0)
5 = MS-7125 bios 1.C MSI regular (W7125NMS.1C0)
ISO (bootable) is at :
http://members.lycos.co.uk/olsen0423/MS7125/
D/L file: 7125_batch_22-10-Okt-15-2006.zip , unzip and burn .
Note!
Make sure that you clear cmos after bios flash (with PSU disconnected) .
After powering up , first to do is enter cmos and "Load Optimized Defaults" and setting date/time , then save/exit .
Next boot to cmos you may define/change to own preferences.
============================================================================================

Quote from: paulg on 08-October-06, 05:16:44
You're a legend syar2003! I thought I'd try v3.0a since v little is known about it and thanks to your efforts it's easy for me to revert back.
Just an initial observation on the 3.0a version - I've managed to get my 3700+ SD (E6 stepping) overclocked well beyond what I mangaged with bios v1.0. I'm now running at 2.9GHZ compared to the maximum 2.7GHZ previously - and i'm running the memory at 1:1 with the timings at stock! Seems stable enough in a windows environment (been running about 4 hours). Temps are around the 38 degree mark. I will run some Prime95 and a few 3d games over the next few days.
Thats very good , seems 3X bioses is better for overclocking afterall
Nice to be appreciated ,thanks for those kind words !
I don't have the Diamond + board myself so I can't really say if this or that bios is good or not and which versions is better or worse .
Syar

Trouble with audio files when imported from audio window

after "bouncing" and audio region and importing it (onto a new track) into the arrange window from the audio window, I can't seem to control any parameters like volume and pan for the imported clip. Is this somehow locked?

sure....say I record a clip in track one with a bunch of plugins....export the clip to the audio region...then import back to the arrange...
First of all it won't let me play the clip in Track 2, but if I shift the clip to track 3 it'll play....BUT I can't control the volume or pan .....very strange. I hate freezing stuff...although I have been for ages....but if this works it'll be cool....
Thanks...
powerbook 867 lol Mac OS X (10.4.3)

MOVED: K8N (MS7220&MS7125) ISO with bios files for flashing from cdrom

This topic has been moved to User modified BIOS.
since along with regular BIOSes, its discussed and provided beta and modded BIOSes
https://forum-en.msi.com/index.php?topic=101664.0

Quote from: paulg on 08-October-06, 05:16:44
You're a legend syar2003! I thought I'd try v3.0a since v little is known about it and thanks to your efforts it's easy for me to revert back.
Just an initial observation on the 3.0a version - I've managed to get my 3700+ SD (E6 stepping) overclocked well beyond what I mangaged with bios v1.0. I'm now running at 2.9GHZ compared to the maximum 2.7GHZ previously - and i'm running the memory at 1:1 with the timings at stock! Seems stable enough in a windows environment (been running about 4 hours). Temps are around the 38 degree mark. I will run some Prime95 and a few 3d games over the next few days.
Thats very good , seems 3X bioses is better for overclocking afterall
Nice to be appreciated ,thanks for those kind words !
I don't have the Diamond + board myself so I can't really say if this or that bios is good or not and which versions is better or worse .
Syar

Problem with PDF file after saving from MS Word

When I have an image in MS Word and I save to PDF, the page with the image becomes black as you can see the text at the bottom is black instead of white. Also, I have Replace Document Colors active to invert the PDF color. Anyone know why inserting an image messes with the text this way?

Not sure, but it may deal with transparencies if those were used.

Cannot generate AIR file when exporting from Xcelsius Engage 2008 SP1

Hi,
Xcelsius seems to go through the motions - "generating swf file" - but no AIR file actuallly lands in the specified folder in my c:\ drive. I have uninstalled and reinstalled SP! but the problem persists. I have the following already installed:
1) Flex SDK 3.1 and the file path to the root directory of the SDK is specified in the sdkPath.dat file.
2) Java version 1.6
3) Adobe AIR 1.1.
Many thanks
Michael

Hi - I'm having the same issue with generating an AIR package from Xcelsius 2008 SP1. My network environment is protected by a corporate firewall and proxy, so I suspect that there are internet resources that are not accessible. I tried generating an AIR file while connected to my home network, and it worked OK (although, I couldn't access the data feeds on my corporate network).
Is there a list of internet resources that Xcelsius needs to access to produce the AIR files?
Thanks

Generate Proxy from WSDL with multiple Files

I need to load a WSDL (to generate a web service consumer proxy). However, that WSDL is build from multiple files, both .wsdl and .xsd, not a single one. It seems the SAP wizard to generate the proxy does expect one single WSDL file however.
Is there a way in SAP to load a WSDL with multiple files, or do I need to (manually) flatten all these files into one single file?

I am not sure why it fails in WebSphere. Please try posting
this question to a WebSphere newsgroup.
Regards,
-manoj
http://manojc.com
"viswanath" <[email protected]> wrote in message
news:40aee7fa$1@mktnews1...
>
thanks manoj for your reply.
I'm using IBM WebSphere SDK for Web Services v5.1
for generation of java client.
I'm able to generate the client but the problem is
the WSDl2Java command ignored the SOAPHeaders while
generating the proxy. Since I'm using SOAP headers for
authentication the code fails.
Thanks,
Viswanath
"manoj cheenath" <[email protected]> wrote:
I am not sure which tool you are using
to generate web service clent. To generate
a WLS web service client you have to use clientgen.
Details here:
http://e-docs.bea.com/wls/docs81/webserv/anttasks.html
Regards,
-manoj
http://manojc.com
"viswanath" <[email protected]> wrote in message
news:40ad8a07$[email protected]..
HI,
I have a web service (implemented in .NET) which extends soap headersfor
doing
Authentication. WSDL is generated out of this web service. But wheni use
wsdl2java
(J2EE) to generate a proxy class, there is no interface generated forsoap
headers.
Without extending SOAP headers the web service works fine.
Basically, I'm looking for a way to generate java interfaces (ie.
proxies)
for
SOAP headers out of the WSDL file.
PFA the WSDL file and the proxy
Any help on this is appreciated.

Getting error while generating report from Siebel (Siebel/BI Publisher)

Dear,
I have completed the integration of siebel and BIP according to the oracle document, I successfully upload the sample template from siebel application to BIP server.
But now I am facing two issues,
I am getting error "Unauthorized access, Please contact the administrator." when I open report on BIP which I have uploaded from siebel.
When I try to generate report from siebel=>application=>Tables=>S_Contact I am getting the below error when click on table report from Report button.
(httptransport.cpp (1635)) SBL-EAI-04117: HTTP Request error during 'Submitting Data SendHTTP request': 'Status code - 500'
(httptransport.cpp (983)) SBL-EAI-04117: HTTP Request error during 'Submitting Data Send HTTP request': 'Status code - 500'
(soapbinding.cpp (675)) SBL-EAI-04304: Unknown Part ':oracle.xdo.webservice.exception.InvalidParametersException' for operation 'runReport' exists in SOAP message.
(outdisp.cpp (247)) SBL-EAI-04308: Operation 'runReport' of Web Service 'http://xmlns.oracle.com/oxp/service/PublicReportService.PublicReportServiceService' at port 'PublicReportService' failed with the following explanation: "oracle.xdo.webservice.
Invalid User Name and Password for BIP Server
(xmlpadaptersvc.cpp (2287)) SBL-RPT-50529: Verify BI Publisher Server Userid and Password.
Error in generating Report Output file /siebel8/sea81/siebsrvr/siebel8/sea81/siebsrvr/xmlp/reports/Rept11-3U7M403.PDF in the XMLP Engine
(xmlpadaptersvc.cpp (2983)) SBL-RPT-50524: BI Publisher engine failed to generate report.
Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
( (0) err=2818155 sys=9815388) SBL-OMS-00107: Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
(bsvcmgr.cpp (1392) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(bsvcmgr.cpp (1236) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(smireq.cpp (425) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
Please help to resolve this issue.
Regards,
Soahil

This specifically means that the destinations have not been configured in the Crystal Job Server. If you're running 4.x, this may be part of the "Adaptive Job Server" instead of or in addition to a Crystal Job Server. If you're using 3.1 or earlier, you'll also have to set up the destination in the Destination Job Server.
You'll have to log in to the CMC, go to Servers, right-click on the correct job server and go to "Destinations". You'll then add something like "File" or "Unmanaged Disk" to the available destinations and save. Stop the job server, start it again, and your error should go away.
Please be aware that unless you're using specific credentials to schedule the report or you're saving to the server where BO is installed, you'll need to make sure that the BO services are running under a network "Services" account that has access to the folder you're scheduling the report to. By default during installation it's set to run under the "Local Services" account that doesn't have access to the network.
-Dell

Pb with generated files by com2java from SIEBEL

Similar Messages

Maybe you are looking for