Pbm in updating the fields with the MODE change (display/change) in VL02N

HI all,
I want to change the delivery quantity and picked quantity in VL02N transaction. But those fields are in editable mode for some delivery document numbers and those are in DISABLE mode for some delivey document mode in VL02N transactions. So i could not ablt to edit the quantity if it is in disable mode...
can anyone tell me why the fields are in disable mode in vl02n transaction?
regards,
Shanthi

in DISABLE mode for some delivey document mode in VL02N
How the "Post Goods Issue" tab ?? Is it in editable mode or it is also in grey mode ?? If it is in grey mode, then goods issue have been posted and you cannot change.
thanks
G. Lakshmipathi

Similar Messages

Help with updates - The software change returned error code 0x87D00215(-2016411115).

I have rolled out bunch of updates across few hundred workstation systems.
Few of the desktops have failed to install SOME of the updates and just can't get my head around as to why?
Looking at one of the workstations, I can see 5 updates are pending download at 0%.
Some of these fail after a while and with in Software Centre, I can see 'Help with updates - The software change returned error code 0x87D00215(-2016411115).'. Not exactly sure what this means, but I have tried clearing the cache and
rebooting the workstations few times.
(I have also tried to use Windows Update and install one of these manually, which worked.)

Investigating this further, I have found the following in CAS.log:
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {ED6E9E5C-E806-43CA-9F93-49AC72D1DEAD} for content 53bf87a2-bedf-4def-b0ec-9637613c3429.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 99ddb078-b780-4605-8fac-9607fe56450d.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/99ddb078-b780-4605-8fac-9607fe56450d', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 99ddb078-b780-4605-8fac-9607fe56450d.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {67B7E59B-A386-4EA8-BF39-2EB64B108A6C} for content 99ddb078-b780-4605-8fac-9607fe56450d.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/61d33de7-9582-41e3-82fc-3e0f970b60f3', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {12E48136-B545-4C42-9745-9FF97CE38D52} for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)

Windows Update for windows 7 won't update the Intel Corporation - Display - Intel (R) HD Graphics

Hi there, a couple of times the windows update on my windows 7 won't update the Intel Corporation - Display - Intel (R) HD Graphics.
What could be the problem?
How can this be solved?

Hello palette35,
Welcome to the community.
You’re having problems with windows not updating the graphics.
It could be security setting blocking the update
You can go to HP.com and download the driver directly.
Here is a link to the site. You’ll need your product number.
Let me know if this helps.

Create a Loolup field with PowerShell but Change the Default Display field

Hi
I am creating the a load of site columns with PowerShell. In the case of a Lookup Column I want to ensure that a the the industry column is checked programmatically.
$myField.LookupList = $spLookupList.ID
$myField.LookupField = $LookUpmyField.InternalName
As you can see there is no provision for a display name (Industry) which I want to display to the user once they select a lookup column
I just know somebody is going to suggest CAML !!!! Btw the code works but none of the checkboxes are selected as expected.
Daniel
Freelance consultant

I tried a same in past. Couldn't find a perfect code. You can try below:
http://blogs.msdn.com/b/varun_malhotra/archive/2008/06/19/how-to-set-the-default-value-for-a-look-up-field-for-an-item-as-it-is-being-created.aspx
<Code>
SPList docs = w.Lists["Documents"];
SPFieldLookup fl = (SPFieldLookup)docs.Fields["City"];
fl.DefaultValue = "1;#Mexico City";
fl.Update();
</Code>
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/afd71aa8-54d3-424f-9b72-67328e080048/update-lookup-field-powershell?forum=sharepointdevelopmentprevious
$w = Get-SPWeb http://web
$l = $w.Lists["MyDocumentLibrary"]
$lf = $l.Fields["lookupColumn"]
$i = $l.Items[0] #List item to update
$lf.ParseAndSetValue($i,"1;#lookupvalue") #1;#lookupvalue refers to the ID of the lookup item and the value of the lookup item.
$i.Update()
If this helped you resolve your issue, please mark it Answered

Update Date field with mm/dd/yyyy format

I have a Field with Date Type then I have to update it with sysdate but only with the mm/dd/yyyy (not TIME)
I make:
UPDATE TABLE
SET DATE_FIELD = to_date(to_char(sysdate, 'mm/dd/yyyy'),'mm/dd/yyyy')
Is There a better way to do it?????
Thanks!

You can use
trunc(sysdate)
for the insert.
Regards,
Gerd

Update OIM field with process form fields

Hi,
I have configured AD as a target resource to my OIM. Now i have a requirement to update few fields of OIM , on the basis of change in the fields of process form when target recon will run. For this, as per my understanding i can use the post insert/post update adapter. I wrote the adapter code as well. But when now i am running the recon against my resource, and updating the field, it couldn't even run the adapter as nothing has been written in logs (not even the println statements mentioned in adapter code :( ). Could anyone please tell me where i am missing.

Hi,
I did create a task and assign it on "Event Processed" (Response) under reconciliation insert recieved and reconciliation update recieved. Now when i tried to run recon it is giving me error while processing the recon event. Error is "An error occured while processing the off lined reconciliation event. [xellerate.jms] processing reconciliation message with id <recon event id> failed" . Am i missing something.... Please help
TIA

Update multiple fields with same/diffrent name

I have the form is displayed order no, message and sent_date. Mesage and Date sent are editable. I can change value from both colums in diffrent values then hit submit for update. My code below is loop thur message and date sent field then update them based on the pk ID. Unfortunately, it didn't work as the expected. Can you please help?
Oder NO
Message
Date Sent
5463
first message
12-10-12
5463
second message
10-13-12
<cfset myIds = ArrayNew(1)>
<cfform name="update" method="post">
<cfloop query="qMesg">
   <cfscript>
        ArrayAppend(myIds, "#id#");
        </cfscript>
     <cfinput type="text" value="#mesg#" name="mesg">
     <cfinput type="text" value="#dateformat(sent_date, 'mm-dd-yy')#" name="sent_date" validate="date" />
     <cfinput type="submit" name="submit" value="Update">
</cfloop>
<cfset myIdsList = #ArrayToList(myIds, ",")#>
   <cfinput type="hidden" name="ids" value="#myIdsList#">
</cfform>

<cfif isDefined("form.submit")>
<cfloop index="idIdx" list="#newsids#" delimiters=",">
<cfloop list="#form.mesg#" index="x">
<cfloop list="#form.sent_date#" index="y">
      update [tblMessg]
     set mesg = <cfqueryparam value="#x#" cfsqltype="cf_sql_varchar">,
           sent_date = <cfqueryparam value="#y#" cfsqltype="cf_sql_date">
   where id = <cfqueryparam value="#idIdx#" cfsqltype="cf_sql_integer">
</cfloop>
</cfloop>
</cfloop>
</cfif>

I am with Dan on this (identifying the field names with IDs), but prefer cfloop to cfoutput within cfform. Furthermore, I would put the submit button outside the loop.
<cfloop query="qMesg">
    <cfscript>
    ArrayAppend(myIds, "#id#");
    </cfscript>
    <cfinput type="text" value="#mesg#" name="mesg#id#">
    <cfinput type="text" value="#dateformat(sent_date, 'mm-dd-yy')#" name="sent_date#id#" validate="date" />
</cfloop>
<cfinput type="submit" name="submit" value="Update">
With proper handling, one loop should be sufficient on the action page.
<cfloop index="idIdx" list="#form.ids#" delimiters=",">
    <cfset current_message = form["mesg" & idIdx]>
    <cfset current_date_sent = form["sent_date" & idIdx]>
    <cfquery>
    UPDATE tblMessg
    SET mesg = <cfqueryparam value="#current_message#" cfsqltype="cf_sql_varchar">,
    sent_date = <cfqueryparam value="#current_date_sent#" cfsqltype="cf_sql_date">
    WHERE id = <cfqueryparam value="#idIdx#" cfsqltype="cf_sql_integer">
    </cfquery>
</cfloop>

Update new field with existing data programmatically

I have a requirement to write a code that update an existing lookup field.
We are running sharepoint 2010. We have a content type, which is used throughout all the sites. The content type has a field called Product, which is a lookup field for all the products we have. The field also contains subproducts. For example, a product
by name PR1000 has a subproduct PR1010 all in the same drop down menu.
Now we want to change this grouping and separate them based on product and subproduct. I have created new field called Parent Product (PP) and Child Product(CP).
I would like to programmatically update the Parent Product field with Product and Child PRoduct field with child product if any. So here is how it works; if an existing item or document has product PR1010, I would to update PP with PR1000 and CP with 1010.
The problem I am having in order to start this project is the product field is part of every document library and lists and there are 1000s of items with data for product.
Please help with ideas or suggestions. I am thinking of a feature event receiver, which when activated will automatically update every item with product field not empty.
Thanks for your help in advance.

As Bruno suggested ,if its on time activity and on the all site then so go with Powershell
script. use feature event receiver when it require on the selected site and if this require to extend
other sites so that contol will be at your end,else you need to again modified the powershell script.
Regards,
Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
http://sharepointundefind.wordpress.com/

Update text fields with xml data based on DDL selection of an ID number

Hi guys,
this one should be straight forward, but I cant seem to find a straight forward answer. In a nutshell:
XML file contains ID, Name, Location (so far 3 records in sample xml file)
Form contains a Dynamic Drop down list to allow selection of ID and text fields to display the associated name and location of that ID. The binding of the Drop down works fine, however I need the other fields to update to the associated name and location when different ID's are selected. I assume I'll need some sort of exit event on the drop down list to update the other fields with the Name and location of the ID selected, but I dont know enough to have a stab at it.
please, please, please help, Im starting to pull my hair out.
James.

Hi James,
This would depend on the structure of your XML but assuming you have something like;
<Data>
            <Item>
                        <Id>1</Id>
                        <Name>Name1</Name>
                        <Location>Location1</Location>
            </Item>
            <Item>
                        <Id>2</Id>
                        <Name>Name2</Name>
                        <Location>Location2</Location>
            </Item>
            <Item>
                        <Id>3</Id>
                        <Name>Name3</Name>
                        <Location>Location3</Location>
            </Item>
</Data>
Then in the change event of your dropdown (your could use the exit event but then value might not have changed so would be performing unnecessary processing) add the following code.
var itemGroup = $data.Data.resolveNode("Item.(Id.value === '"+xfa.event.change+"')");
Name.rawValue = itemGroup.Name.value;
Location.rawValue = itemGroup.Location.value;
The xfa.event.change will be the value selected, the resolveNode will return the Item with the matching Id, and then it is just a matter of assigning it to your form fields.
Hope this gets you started.
Regards
Bruce

How to update TASK_hyperlink_address field with PSI?

Simple question but hard to do.
Can we have custom fields with html hyperlink?
And why having fields read only ????

Enterprise Custom Fields do not support Hyperlinks. You can use the HREF standard task field for this purpose.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG

Write/Update IPTC fields with database information.

Hi all,
I'm testing lightroom and at this moment I'm happy with its features. I'm a ACDsee Pro user, and I miss one inportant feature in lightroom.
In ACDSee you can create templates, and then run a batch to write the database information (image rating, keywords, categories, owner, etc) in the IPTC fields of the images.
This allows you to have your star ratings, per example embedded in the image. Benefits? you can recover your database from the iptc, or you can use the rating done with acd in other apps.
Is a very powerful feature, because allows you to specify in what iptc field you want any information, and is possible to replace the entire field or jus add some information.
I wonder if is in lighroom any way to do the same. I would like to write the keywords IPTC field with the lightroom database keywords. Do you know how?
And what about to write the stars or color code in any IPTC fields?
If lightroom allows this, must fit all my needs ath this moment.
Thanks a lot in advance!

Carlos
I think you are talking about the menu command Metadata >Save Metadata to file - Ctrl S or Cmd S. For documented file formats like JPG, TIF, PSD, DNG, this writes the metadata into the file itself. For undocumented formats, mainly raw files, this creates xmp files.
John

Runtime error when updating service item with BAPI PO CHANGE

Hi,
I get rutime error TABLE_INVALID_INDEX after calls:
BAPI_PO_CHANGE-> PROCESS_NON_INTEGRATED_COMP-> CHANGE_PO_SRV_ITEM -> MS_CHANGE_SERVICE_PACKAGE_PO -> ROW_IN_PO -> CHECK_ACC_PO -> MS_CHANGE_ACCASS_PO -> ESKL_UPDATE.
the reason is, that ESKL internal table is empty, so the function retrieves last entry index, there is no entry , so sy-tabix = 0 , and function updates with index 0, which causes the runtime error. I dont know why it is empty, maybe I should copy this table gt_srvaccess from BAPI_PO_GETDETAIL to BAPI_PO_CHANGE.
This error appears only in mode KNTIMOD=2 (Multikontierung), not in KNTIMOD=1(Einfachkontierung), so just when ESKL contains more lines for one PACKAGE_NUMBER.
I am just updating the value ordered to be equal value delivered to close the PO, or delete the item in case ordered >0 and deliveded = 0.
Here is my part of code:
*close existing PO's by changing the value ordered to the value receipted
            move 'X' to w_change_flag.
            w_hdrx-po_number = 'X'.
            if w_total-val_gr_for is not initial.
              w_itemx-delete_ind = 'X'.
              append w_itemx to gt_itemx.
              clear: w_itemx.
              read table gt_services into w_service2 with key pckg_no = w_item-pckg_no.
              if sy-subrc eq 0.
read table gt_services into w_service with key pckg_no = w_service2-subpckg_no.
                if sy-subrc eq 0.
move: w_total-val_gr_for to w_service-quantity,
                        '1'                to w_service-gr_price.
                  modify gt_services index sy-tabix from w_service transporting quantity gr_price.
                endif.
              endif.
            else. "nothing delivered yet, set deletion flag
              w_itemx-po_item = w_item-po_item.
              w_itemx-delete_ind = 'X'.
              append w_itemx to gt_itemx.
              clear: w_itemx.
              w_item-delete_ind = 'L'.
              modify gt_item index w_count from w_item transporting delete_ind.
            endif.
    call function 'BAPI_PO_CHANGE'
      exporting
        purchaseorder = w_ekko-ebeln
        poheader      = w_header
        poheaderx     = w_hdrx
        testrun       = w_testrun_flag
        no_messaging = 'X'
      importing
        expheader     = w_exphdr
      tables
        return        = gt_return1
        poitem        = gt_item
        poitemx       = gt_itemx
        poservices    = gt_services.
Thanks, please help.
regards Rob
Edited by: xsmid4 on Nov 2, 2011 11:49 AM
Edited by: xsmid4 on Nov 2, 2011 12:08 PM

Hi,
Take a look at OSS Note 827731. It might be helpful to you.
[ Link for Note 827731|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=827731]
Regards,
koolspy.

Gnu readline with vi mode change visualization

After a lot of searching how to get some kind of vi mode indicator working with GNU readline I've decided to hack readline myself. It's working fine for me and because I'm happy archlinux user I've decided to share my findings here, so maybe somebody will find it useful too.
there is a patch to readline needed - I've created AUR package readline-vi-mode-changed-hook
additional logic / configuration to provide your visualization
To not double post what I've already wrote in more detailed way, here is the link to my personal blog where I've documented the whole thing.
There are however few things still bugging me and maybe somebody will be able to help me with that. The particular thing which I would like to solve is to get escape sequence for changing cursor color working inside screen and tmux. I've found trick for screen but what is expectable is that when switching windows the cursor color is not reset by screen to last color set in particular window. Because cursor color sequence is not really a standard nor part of termcap / terminfo I feel it will not be so easy / possible ?
Last edited by mirci (2010-10-11 19:26:06)

Sara wrote:Am using this with GNU screen, and it works great (no change in cursor color, of course, but I think I actually prefer that, as it isn't inconvenient to look at the window title in DWM). Thanks for sharing the patch--I don't know how I ever lived without it
Well I started with the window title as I use Xmonad, then I realized that looking up or down on screen isn't very convenient for me (mainly because of a big screen I have) but it's still fine, so I was thinking about visualization which would be closest to the prompt location, cursor color was natural choice however it is not very reliable in terminal multiplexers and in general. The latest and my favorite now is the change of prompt itself (eg. bold version).
Anyway thanks for feedback, firstly when published this I thought nobody is using VI mode with readline judging based on almost no feedback at all. It's cool that at least somebody found this patch useful .
lavandero wrote:
Would you be interested in porting this to NetBSD editline (libedit)?
Open/FreeBSD also use it, just in case that qualifies as incentive.
I don't use any application which uses editline. I know it just in the meaning that it is implementing similar functionality as readline do. I guess then some applications usually can be compiled with readline or editline (if author thinks it can be useful based on different licenses and so on) ... does the *BSD systems do it that way ? Anyway I have editline in my mind if I would maybe implement some application where I would need readline functionality. Readline is fine but to be honest I found the source code of it not very nice. So to your question ... as I'm not user of the editline so far I am not planing to port this patch there anytime soon.
Just out of my curiosity which let's say well known applications can be compiled against readline and editline, is it out of box provided by upstream or usually patches are done for it. How it works in *BSD then ? In my archlinux box I frequently use mainly 2 readline applications (bash, i/python).

How to Change the Fields from Input mode to display mode

Hi experts,
Here is my business requirement. I need to show certain fields in the PRICING TAB OF SALES ORDER in display mode. Now for this i am using the BADI definition CRM_PRICING_BADI.
   Now, can anybody tell me how to change the field type from input mode to change mode?

Hi Karan,
In your BADI has a parameter CT_INPUT_FIELD_NAMES with one field called CHANGEABLE with values:
     Field Can Be Changed
A     Field Cannot Be Changed
   Assing this values to your fields according with your requirements.
Regards.
Manuel

Update Text Field with Vendor Account

Dear Experts,
I have a requirement where the user when executes APP F110 the field Text of the Bank Line Item should get updated with the Vendor Account Name so that whenever User executes GL Line Item Display for Bank Clearing Account user should get to know the Vendor Name.
Is their a Standard functionality through which the same could be done.
Regards
Rahul

Hi
Try Substitution - OBBH
New entries - Company code, Line item, Enter a Name
Environment - Substitution - Create yes
Select your substitution name - Select create step on top
Select 'Field assignment' - Text field
Prerequisite - Transaction code = Constant "F110"
Substitution - Text = LIFNR
Hope it helps
Thank You,

Pbm in updating the fields with the MODE change (display/change) in VL02N

Similar Messages

Maybe you are looking for