PC to Mac Networking

I am trying to directly connect via the ethernet ports a Panther Mac to an XP PC for the purpose of transfering music files from the PC to Mac. I have not been able to get this to work even after following the instructions I have found on the web.
I have moved the music files to the shared folder and enables file sharing but when I go to Finder and Networking I do not see the PC, and when I try the Connect to Server smb://... I get an error code -36.
I was wondering if anyone here has done this, and if the could leave me the instructions on how to do this properly.
Thanks to those who take the time to reply.

If you are still thinking of giving this a shot.....you might want to try making sure both firewalls are switched off and.....
Use the PC to "set up a home or small office network" and use this to make sure the PC is set to the workgroup called "WORKGROUP"........
make sure both computers are properly connecting to your router and have IP addresses.....
then, I would use the PC to try to connect to the mac. This seems to work better than the other way around. When you go into the mac preferences program and go to "sharing" and turn on "windows sharing" it will tell you the address to type into your IE explorer window to access your mac files.
Hope this helps.

Similar Messages

  • I recently upgraded my iMac to 10.9.2 Nothing but problems since. Cannot connect reliably to a mixed pc/mac network at work, hangs at start up, hangs at shut down. Please help!

    Can anyone offer suggestions as to why since upgrading to Mavericks 10.9.2 I can no longer access a mixed pc/mac network? Previous to the upgrade, I did not have any problems. Other macs within my office can still access it, so I know it is not a network based issue. It exists in my machine only, and the other matching machine that exists in the office did NOT do the upgrade and has no problems. (Bummer for me)
    I have:
    Reset the PRAM
    Reset the SMC
    Turned off the network Wifi and rebooted, then turned it on again, still ridicously slow when I try and connect to shared pc server. I can connect to other macs though.
    Seems to alternate between a normal start up time, and a ridicously slow start up time with no apparent connecting reason as to why
    I have a shared HP Laser printer on the network that is working with other computers accessing it, perhaps this is the conflict? It is in Wifi mode, but the software is loaded on my computer. However, prior to the upgrade, I had no problems.
    My mail crashed shortly after installing 10.9.2, but I did finally get that up and running, but sometimes it loads and tells me that there is "No Mailbox Selected" in the initial opening Mail window. This is new, it never used to do that. I can select "Inbox" and see my mail, but I never used to need this step.
    When I try and access the shared network that has always worked previously, it now will not load the shared docs and folders, just sits there, and hangs. Sometimes it will load the folders after about 5 minutes, but will not allow me to open them.
    I do not run any virus protection software.
    Any ideas? I would be infinitely grateful for suggestions.

    Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
    If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
    http://www.etresoft.com/etrecheck

  • I tried, but ... Mac Network & Win-7 PC

    OK, I start with "I Know..." look thru old posts to find answers.......
    Just Spent last 4 Hours doing that. I understand how frustrating it can be to keep answering the same questions (Really Do) but a Great Fix for that would be finding Some Way to make it possible for us to FIND those old posts we are supposed to look for. I have read countless "Close, but not quite" discussions. I give up.
    I'm assuming after entering all my machines in the database you can see those at the bottom of the post?? (I have seen others posts that had these details) to save space, I wont repete all that here other than to say I have MANY Apple Products (Phone, Pad, TV, Laptop, Mini...) and they all work & play with each other with fluid ease...... then there is the ONE... PC Laptop. Running Win-7.
    NOTE: ALL of this is INSIDE My Home Network (Apple Time Machine Wireless) so no Internet stuff should be necessary.
    I'm sure it is asking way too much, but I sure would like to be able to use the PC like any of my other mac's. I have managed to share a drive (External HDD) from the Mac Mini (Lion) and by "Mapping a Network Drive" on the PC it ...sometimes connects on it's own, when it doesn't it's simple enough to log back in and get it back but ....
    As an example, with my Mac Book Pro. I can SEE all the other devices, Log into them, Share print & data and "Screen Share" to remotely administer (eg. the Mini from the Laptop)........... What I'm looking for is those same abilities on the PC.
    ("Why don't you just buy another Mac Laptop?" - Send me a check for a Couple of Grand, and I will. Other than that, I have to work with what I have. The only "Extra" Computer I have is the PC) Just trying to make some lemonaid out of this lemon. OK?
    Frankly the only posts I found even close seemed to be about making a lone Mac work on an existing PC Workgroup Network. This is the Flip Side, One Lone PC is a world of Mac's. I have to admit my PC skills are rusty. I was a PC Guy that got "Converted" used to know Lots of the in's & out's of the PC's, but that was about 4 Operating Systems Ago (2000 & XP-Pro) I find I now feel like a Newbie again plodding along in the new MS OS again.
    Being able to see the other machines would be a plus, connecting to all the drives & my NAS would be Great, but the Screen Sharing would be my Top Wish (If it's even possible) My various Mac's often do work that is LONG Running (sa Rendering Long Video Files, etc.) that can run on their own for long periods and Occasionally Need just a Nudge from me to get started again. This is why the Screen Share is a Big Deal for me. Do some work, Check in on #1, start it's next process, log out, check on #2, move some files and begin a new Process, log out, check on #3, then go back to work.... and I'm Not Always at my desk, so being able to quickly Pop in & out of each machine is a BIG PLUS for me.
    I tried some Remote Desktop Software a while back when I was trying to connect my iPad to my Home Mac Network from Outside my home and discovered I knew Less than Squat about that. Tried & Failed to get software to work even after several emails with the developer of the APP. I couldn't even understand what he was talking about (and I have a CS Degree ??... OK an Old One on Main Frames, not PC's but I'm no Dummy and he was talking WAY over my head) So I pretty much gave up on that option.
    If you have the answers? Appreciate the Info,
    Even if all you have is links to other posts that have what I'm looking for? Great Too
    Thanks
    Products
    Time Capsule, Mac OS X (10.6.8)
    Apple TV (2nd generation)
    iPad, iOS 5.1.1
    MacBook Pro, Mac OS X (10.6.8)
    Mac mini, Mac OS X (10.7.4)
    Toshiba-PC, Windows 7

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START>PROGRAMS>ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START>PROGRAMS>ACCESSORIES>Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Looking for Mac network professional to setup our small business network.

    I've installed OS X Server on an iMac within our office to act as a file server and also allow us to access files using a VPN.  Probably should have purchased a Mac Mini Server and will likely go that route in the end. 
    I'm computer savy, but little networks experience and just can't get this working correctly. If we had more time to dedicate to this and with help from this forum, I'm sure we could get it up and running.  The goal is to get a simple network going that will allow us to access files, etc in the field and at our home offices with the ability to grow as our business expands.
    At this time I'd really like to have someone just handle the setup of the network so we can get functionality asap.  I've done some searches and looked for a network professional in our area with experience in Mac networking within a business environment, but haven't had much luck.
    If anyone point me in a direction of someone that can help get this going I'd be forever greatful:)
    Location: Southern California (Rancho Cucamonga)

    I'm not a rocket scientist but I do have a working mail server and website using a mini mac and os x server (Mavericks).
    It all begins with your DNS and I recommend you do use a mac mini with OS X Server as it's designed for that very purpose. You absolutely must get your DNS situation working first. There's a guy in this forum named Mr. Hoffman who is particularly useful (there are others) in this area. He has a website with lots of helpful advice and, in particular, this: http://labs.hoffmanlabs.com/node/1436.
    However, before you embark on that journey, this is what you'll basically need to do:
    You're going to need a public (external/public facing) DNS and a private (internal) DNS. Your private DNS (served by your os x server) needs to live behind some kind of hardware firewall/router to prevent the great unwashed and curious from venturing into places they probably shouldn't be venturing. It's port(s) should never be exposed to the outside world.
    Get a static IP from your ISP and register a domain name.
    Let your domain registrar provide the external DNS.
    You'll want to set up an internal DNS using OS X Server in the 10.0.0.0/16 subnet (it doesn't seem to let you use 10.0.0.0/8 and it really hates 192.168.0.0/24).
    The server itself will need to be "self-aware" by setting it's System Preferences > Network Preferences > DNS Server to 127.0.0.1.
    Of course, once you get the DNS working you'll want to turn on File Sharing and then (and only then) Open Directory. THen you can begin adding other services such as web, mail, vpn, etc...
    I'm sure there is lots more that I've missed but this should do for now. Good luck.

  • Dell connection to a Mac network....NOT WORKING!

    OK, here is the situation. I am a Mac user and was given a old Dell with Windowz XP Pro. I already have a Mac network with two macs and a printer. They both can connect to my DSL perfectly. When I was given the Dell, I figured I wanted to connect it my existing network. This is where the problem comes in. First I have no idea how to do this. Second, I connect the Dell to the router. The Dell will not connect to the Network. But when i plug in the wire to the router, the network just, stops for the macs. So there I sit trying to figure out how to make this work with no internet for all computers. Basically I want my Dell on my already established Mac network so that my Dell can connect to the internet and everything like that, and still use my macs.
    Help would be the greatest!

    Are you connecting all of these with LAN cables or wirelessly? In order for the MACs to communicate with the Dell, you need to turn on 'windows sharing' from the 'sharing' folder in the 'system preferences'.
    It's difficult to troubleshoot this kind of problem because there could be a number of different issues. Is the Dell able to connect to the internet if all of the macs are disconnected? What kind of router are you using? Have you tried configuring the router? If not, go onto the internet and read the through the FAQ section for your router. Perhaps you could run a program on the Dell to get it to work..
    You need to be very methodical in how you attack this problem. Try the dell connected directly to the modem. Does it work? If not, there might be a problem with your ethernet cable. If it does, then try connecting the dell only to the router. Does it work? If not, then you need to follow the steps from your router and configure the router and computer so that it will work. Once that works, add the macs. Do they work? etc.
    Good luck.

  • Excel files not available across an all mac network

    All the excel files in my public folder are not accessible across a two machine all Mac network. Word files will open. Anyone have any suggestions?
    Thanks

    I know this is going to sound weird, but I spent the last two days figuring this out. I recently bought the teacher's Edition of Office 2004 so I could have the same version of Office on 3 of my Macs and after installation that's when Excel quit working over my home network. The previous versions of Office up to X didn't exhibit this behavior. So after looking at Apple's and Microsoft's sites and user groups and getting no answer that worked, I looked at my machines to see what the differences might be. The thing that tripped my trigger was two of my Macs had the same named hard drive and one didn't, and it was that one that was named differently that could see one of the other two. So look at the name under your hard drive icons (by default it's named Macintosh Hard Drive). If they are the same, rename one of them (the name can be anything just as long as it's not Macintosh Hard Drive). I would name them something to differentiate them like Will's iBook or Will's iMac. I don't have a programmers understanding of why this worked, but my scientific wild *** guess (S.W.A.G) is it's an Excel naming convention gaffe. It appears that Excel thinks there are no others on the network because all the hard drives are named the same. Word doesn't do this so I'm guessing that instead of looking for m.a.c. addresses or your network DNS/IP numbers, Excel is looking for hard drive names to distinguish users on the network. If I'm anywhere close to right, this is really dumb! Try it and see if this solves you problem.

  • On a Mac-to-Mac network I can't see the other Mac in the finder

    Hi there!
    On a Mac-to-Mac network both Mac connect to the same network. However, after activating the file sharing both Mac's don't show in the Finder of the other.
    Can anybody help?
    Thanks.
    Tom

    Hi and welcome to Discussions!
    If just clicking in the 'Network' icon in Finder doesn't work try:- from finder hit command/shift/K or 'Go' network. That should get the other computer showing in the finder of the first.
    Have fun!
    Adrian.

  • Help needed turning LC II into Mac network server

    Just picked up 4 LC IIs that I would like to turn into Mac network servers. I would like to adapt the 80 pin blade style SCSI HDs to work with a B&W Rev. A. Need to learn more about hot swappable SCSI arrays.
    Comments welcome.
    Jim

    Jim-
    You have asked seven questions at once.
    Any Mac running 7.1 or later can share files using Personal File Sharing, without the need for AppleShare server or Mac OS X Server software. This is all most folks need for casual home or light office use. 7.5.3 and later has the easier to use Open Transport networking software, and 9.0 or later can most easily connect with Macs running 10.4 and later.
    LC-II have only narrow SCSI-1, and unless they have sprouted a PCI slot, cannot participate in the rest of this discussion.
    There are several classes of Wide SCSI busses. The one first implemented in the beige G3 with Server card is a Fast & Wide Single-Ended bus. It used the readily available and really cheap Apple/ATTO PCI PSC card. It is limited to the 3 to 4 feet of 68-pin high-tech-plastic-jacket cable already installed inside the cabinet, and adding any external drives made the cable too long, and the whole thing became unreliable. Many Single-Ended Drives can provide termination with a strap setting.
    Historically, HVD (High Voltage Differential) came next, but it was a false start. It is incompatible with everything. Stay away.
    The next class of Controllers and Drives used LVD (Low-Voltage Differential) drivers and receivers. These "balanced" or "push-pull" drivers and receivers are much more noise-immune. Speeds increase dramatically and cable length restrictions are (practically speaking) eliminated. Some Internal cables still use the flat high-tech-plastic-jacket cable, but are generally implemented with twist-and-flat cables. To use adjacent drive positions in a Blue & White G3, your cable must have more than 8 inches between connectors, mainly due to the bizarre way the cable must be folded to reach the drive connectors.
    A discrete captive terminator at the end of the cable is the norm. Occasionally, a terminator that is plugged into the last connector socket is used instead. All these terminators are generally capable of applying termination for either LVD or Single-Ended cables, and do so automatically. But they are too big to fit on a drive, and therefore almost no LVD-capable drives contain termination circuitry.
    Caution: If any drive on the cable is a Single-Ended drive, the entire cable drops back into Single-Ended mode, and previous cable length restrictions and speed limits apply!

  • Mac network performance issue

    I've just had a new ISP hookup. My WiFi is blazing fast. But my Mac network speed is slowwwww.
    Speedtest.net just reported:
    Ping: 253ms
    Download: 1.12Mbps
    Upload: 0.43 Mbps
    On my iPad via Wifi, I get:
    Ping: 19ms
    Download: 13.88Mbps
    Upload: 0.90Mbps
    My Mac I think dates back to about 2005/6, even though you would think 2008 based on sites like everymac.com. But I bought it long before 2008.
    The only modification I've made to it has been to bump it from 2GB to 4GB memory. That slowed down the bootup, but not ridiculously.
    How can I diagnose fix this network issue?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Mac network?

    I'm new to Apple stuff still. I was hoping someone could help me set up a Mac network.
    I have a Macbook Pro running 10.5.8 and an iMac running the newest version of Snow Leopard. I want to be able to wirelessly transfer songs that I add to iTunes, or text documents that I write, but I don't know how.
    If anyone could help me, I'd appreciate it. I guess I don't even really know what I'm asking. I think it's some sort of wireless network. The only wireless I have is for the Internet. Anyway, thanks!

    Niel and Henry, thank you. I believe you have solved my problems.
    I would like you both to know that even though I may be a million miles away from you, I still really appreciate you and it makes me feel happy that you care enough about me and my network to take the time to reply. People like you really make life easier.
    Thank you.

  • Waking My Mac Network

    I know I am missing something very simple, but I can't seem to find the answer. I have added a MacPro (Sweet!) to my Mac network. In moving "stuff" around between the units and some data from Windows boxes (forgive me!) I can't seem to find a way of "waking" the Macs short of changing all the Energy Saver settings to "never." It defeats the purpose of a network if you have to physically go to the computer and wake it inorder to use the resources. Any help on this simple one?
    iMac, PowerBook G4, MacPro   Mac OS X (10.4.7)  

    Ned - I tried Wake and had limited success. What I did have was a total melt down of my wired network after trying it. I ininstalled the program and spent about an hour trying to figure out what had happened -- wireless was fine for the internet for the Macs and wired worked for the windows boxes. Apparently there was a little code left behind "localized.rsrc" which I took to be Wake related. I couldn't empty the trash because "localized... was in use." I finally was able to force emptying the trash and the wired network immediately returned. Very Strange! Another odd thing while trying to dope out the problem was the fact I was able to ping the other Macs with the wireless card turned off in each -- but the internet and actually attaching to the other Macs was a no go -- until I got rid of Wake. Oh well, just another learning experience -- but thanks for the idea

  • I HAVE A MAC NETWORK WITH A HP LASER-JET AND EVERYTHING IS WORKING FINE.  I ALSO HAVE A WINDOWS BASED MACHINE THAT I WOULD LIKE TO PRINT TO AS WELL.  HOW CAN I ACCOMPLISH THIS?

    I HAVE A MAC NETWORK WITH A HP1200 LASER-JET AND EVERYTHING IS WORKING FINE.  THE PRINTER IS CONNECTED DIRECTLY WITH ONE OF MY MAC-MINI"S.  I NOW HAVE A WINDOWS BASED PC AND WOULD LIKE TO PRINT TO IT AS WELL.. HOW CAN I DO THIS?

    Make sure that you Printer Sharing enabled on the Mac Mini.   System Preferences > Sharing > Printer Sharing
    Do the same on the PC
    On the PC, try downloading and installing Bonjour Print Services for Windows v2.0.2
    Run the application on the PC to see if it will discover your printer and install the printer.

  • Delete .mac network icon

    Can anyone tell me how to delete the .mac network icon from my System Preferences? I threw away the software years ago, and got rid of a lot of other gunk coming from it this week, now I get an annoying message instead of the Screen Savers I want to see. Yes, it's in my Screen Saver list.

    The message is: Please select one or more subscriptions by clicking Configure in the Desktop & Screen Saver preference panel.
    Sounds like that is coming from the screen saver (probably called .Mac) that uses shared pictures in your .Mac online storage. It is not directly related to any "network option."
    If you choose to use a random screen saver, when the .Mac screen saver is selected at random, it wants to know what .Mac account to use for the pictures it displays. You can either not use the random choice, and pick a screen saver that is not the .Mac screen saver. Or you can remove the .Mac screen saver from the list of choices. Since it's just a screen saver module, there should not be any problem with removing it.
    It should be at
    <startup volume>/System/Library/Screen Savers/
    The problem here is that files with names that begin with a period (.) are invisible in Finder, and this module is named .Mac.slideSaver. So it is invisible to Finder.
    You can use Unix command in Terminal to find and move it, or you can download this handy utility called TinkerTool
    http://www.bresink.de/osx/TinkerTool.html
    It has an option to +Show hidden and system files+ on its Finder tab. Select that option, then click the button at the bottom of the TinkerTool window to +Relaunch Finder+.
    Now, if you go to
    <startup volume>/System/Library/Screen Savers/
    and you should see a file called .Mac.slideSaver. Move it to the Desktop or another location. Now, when you use the System Preferences pane for screen savers, the .Mac screen saver should not be on the list. If you ever want it back, you can move that file back.
    Don't forget to change the +Show hidden and system files+ setting in TinkerTool back to OFF.

  • Time Capsule newbie to Mac Networking.

    First newbie to Mac Networking. At home Apple products include 1-iMac, 2-MacBook Pro, 1 Macbook Air, 4-iPhones and HP printer all wireless networked with Verizon Fios Router. Having lag issues with internet and printer connectivity. House is three levels, whereas need connectivity at any given time. 
    Question: Am looking to purchase Time Capsule (3 TB) in hopes that this will extend the range and help with the connectivity issues plus a wireless backup for me. Have a external 3 TB connected to the iMac for backup with TimeMachine. None of the MacBooks have backup capabilities. Will this help with backing up just the MacBooks? Is this all I need?
    Question: Would I need a Airport Express station on third and basement levels to help with the network connectivity, if the Time Capsule is located on the second level of the house?
    Need a best setup before I go out and spend monies on product(s) that I would need or not need. Appreciate any help! Thanks for the time.

    Question: Am looking to purchase Time Capsule (3 TB) in hopes that this will extend the range and help with the connectivity issues plus a wireless backup for me
    Welcome to the community support area for the Time Capsule!
    Let's start with one question first and get that clarified, since this will determine the answers to your other questions.
    When you say that you want the Time Capsule to extend the range of the wireless network, this implies that the Time Capsule will be located on another floor or some distance away from the Fios router.
    In this case, the Time Capsule must connect to the Fios router using a permanent, wired Ethernet cable connection. It cannot connect to the FIos router using only a wireless connection.
    Specifially, connect the Ethernet cable from a LAN <--> port on the Fios router to the WAN "O" port on the Time Capsule and configure the Time Capsule to create a wireless network that uses the same wireless network name and same password as the Fios wireless network. Then, you will have one "big" wireless network.
    So, the first question here would be whether or not you are able to consider this type of installation.

  • Networking a PC to my Mac network

    We have a small office network, with four Mac. A G4running, two MacPro Pros, and one IMAC G5. We are all running Tiger. The MacBook Pros are wireless, the G4 and G5 are not. We needed to bring in a PC that runs Vista Home. We plugged it in the DLink Router, and it can access the other computers and the Zerox Phaser printer. But the Mac's can't access the PC. When I choose "Go" "My NetWork", I see it there, but when I try to Log On to the PC, it just spins it wheels and I have to relaunch the Finder.
    I sure could use some help.

    You might want to post this on the "Tiger" forum, since this is the "Leopard" forum and you're running Tiger on all your macs.
    Ensure you have windows networking enabled on the macintoshes. Go to the system preferences and select "sharing" and select the windows sharing option. Then try to access the PC from the macintoshes by pressing cmd-K (or select "connect to server..." from the "Go" menu in the finder) and type "smb://ip_address" where "ip_address" is the ip address of your PC. You should also be able to browse for the PC as well, but sometimes that doesnt always work. Likewise, ensure you have a folder shared on your mac, and then from the PC type "\ \ip_address" (two backslashes with no space...this forum recognizes two backslashes as a "return" character and wont display them so I put a space between them in this message) in the explorer menubar, where ip_address is the address of your macintosh. This should tell the computer to directly access your mac instead of trying to discover it on the network. Alternatively you can use the computer network name instead of the ip addresses, but ip addresses is more direct.
    Message was edited by: Topher Kessler

  • Can I connect Windows 7 to a mac network account server

    Hi All,
    I have a Mac Mini Server allong with a pile of Macs and a few PCs. What I want is being able to login to an ACCOUNT from ANY of my macs OR PCs. So when the computer turns on it asks you to put in a username and password. I know this is possible if all computers are running the same opperating system but i am not sure how to do it with different opperating systems.
    Thanks,

    I was struggling with this for a few days as well!  Finally got it working though ! YAY !
    Here are the steps:
    1. Add this to your registry:
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\PolicyAgent]
    "AssumeUDPEncapsulationContextOnSendRule"=dword:00000002
    2. Open secpol.msc (click start > search for secpol.msc)
    - Local Policies > Security Options
    - Network Security : LAN Manager Auth Level…
    - Set to: Send LM & NTLMv2 - UseNTLMv2…
    And
    - Network Security : Minimum session security… clients
    - uncheck "Require 128-bit encryption"
    3. Restart PC
    4. Create VPN Connection on Windows 7
    - Host Name: (server IP or yourhost.name.com)
    - PPP Settings : Enable LCP (only)
    - Type: L2TP/IPSec
    - Pre-shared key : yoursharedsecret
    - Data encryption : Optional encryption
    - Allow CHAO and CHAPv2
    5. Router on server-side must allow VPN Passthrough and forward ports: 50, 51, 500, 548, 1701, 1723, 4500 to the server box. Also, do not filter anonymous internet requests, multicast or NAT Redirection but enable SPI Firewall.
    ...now you should be good to go

Maybe you are looking for