PCSuite makes computer CPU max at 100%

I just installed the PC Suite software (Nokia_pc_suite_7_26_0) onto my Dell Latitude D510 using XP Pro. I'm connecting though Bluetooth. I was able to detect phone (6650) and make connection. After that, my PC hangs...CPU is at 100%. I have narrowed to the PCSuite software running. If I kill the that process the CPU is back to normal.
Help!

ness...for completeness this is PC Suite updated a few days ago, version 7.1.28 (.exe properties page)
running on Windows XP over standard Dell Toshiba bluetooth on a Latitude D810 (and I know that is a flakey piece of hardware/software in itself - bluetooth gives no end of problems).
This problem is definitely introduced by the latest version/update.
Apps run file when started manually (e.g. PCSync2, ImageStore, CommunicationCentre). Best Nokia devs go away and look at what was added and do some more testing over bluetooth...

Similar Messages

Why is CPU maxing out 100% when burning dvd?

I bought premiere elements 13 yesterday and got my dvd ready to go. I started burning it today and it's been over an hour and still processing, it may have taken 1.5 hours total. Trying to run photoshop at the same time was making photoshop very slow so I checked resources I saw premiere was using 99% of my cpu, even after closing photoshop. When the screenshot was taken it was at 93% encoding and dropped a little. I have an i3 3.4gz dual core and have never seen it go above 50%, and even that was just a spike. The system also has 8gb of ddr3 ram on windows 7 64bit.
The dvd burning appears to be done but the program won't respond, it's now fluctuating between 0-5% of my cpu but is still not responding. It doesn't have the actual not responding, program frozen error, and makes me wonder if it is done burning.

digitaldoodlebug
Thanks for the reply and considering the comments.
Please remain with the "Fit Content to Available Space" option with a check mark next to it.
The only time that I disable that option by removing that check mark is when I get a Data Rate error message which forces me to remove that check mark so that I can manually set the Bitrate to lower value to enable the burn process to proceed.
783 MB at 1.69 Mbps (megabits per second) is definitely the lowest quality bitrate set. The maximum bitrate in Premiere Elements burn to is 8.00 Mbps.
If you are using a standard DVD disc (4.7 GB/120 minutes), in reality that 4.7 GB is 4.38 GB for your disc capacity. The Premiere Elements burn to DVD uses a variable bitrate which means that your max 8.00 Mbps will vary across the DVD being produced.
If you are seeing a No Disc error in the mix, that is another matter...there is a known error in 13/13.1 which requires deletion or disabling of the OldFilm.AEX file. This has been written about here a lot.
Local Disk C
Program Files
Adobe
Adobe Premiere Elements 13
Plug-ins
Common
NewBlue
and in the NewBlue Folder is the OldFilm.AEX file that you delete or disable by renaming it from OldFilm.AEX to OldFilm.AEXOLD.
So, please look at that, leave the check mark next to Fit Content To Available Space (if 8.00 Mbps is much less than 8.00, then consider a Double Layer Single Sided DVD (8.5 GB/240 minutes, in reality 7.95 GB).
We will be watching for your progress. Any clarification needed, please ask.
Thanks.
ATR

Flash player 11 is very glitchy on ALL browsers and makes my CPU usage 100%,Streaming media headache

flash player 11 is very glitchy on ALL browsers and makes my CPU usage 100%, making all youtube and pandora or any streaming media a headache, i have a low-end but good quality Emachine with Windows 7 Sv pk. 1, AMD Athalon Processor 2650e 1.6 GHz 2GB ram 32-bit, which isn't that bad, it used to play HD videos and everything without a skip or lag, it is virus clean, and clean of any large bulky programs, the only thing that went wrong was the fact that the adobe flash updates slowly but surely made it worse, AND it will not let me roll-back to an older version anymore like it used to, so WTF is up? no one seems to have an answer for this, and it seems like ADOBE is doing everything in it's power to not let me ask this question or get it solved, maybe it's because I AM TOO SMART FOR IT AND KNOW IT'S A FAILURE. so please, anyone who actually has a degree in this field is welcome, but no BS anymore, i want answers.
[moved to Flash Player forum]
Message was edited by: sinious

The jump to FP11 was pretty significant with Stage3D. Now Flash Player has a lower level access to your computers GPU to offload playing video and 3d rendering to the GPU. However if your systems GPU isn't up to the task you really won't see that performance gain.
Enter H264 video decoding. A large segment of the Flash usage market is simply viewing video. For sites without fallback in mind (or don't mind software rendering fallback), video may suffer. Using the GPU accelerated video classes may make it difficult for your system to view playback. Disabling hardware acceleration as recommended above would revert you back to software (CPU) decoding to check if your system itself is the issue (and not all the new GPU additions). You did that yet you're still having an issue.
Just to clarify, as I have an eMachine (for accounting), your computer is very much in the "budget" margin. You have a 3 year old single core 1.6ghz AM2 CPU with 512kb of L2. That's the K8 series. This is a very underpowered, single thread loving CPU. Only the most optimized Flash sites and lower end videos (720p or below) should play, but I'm not even sure if they'll "play well". It depends on your GPU.
Also you should know they have an official list of unsupported chipsets and drivers based on many factors. Here's a list for FP11 and AIR3:
http://helpx.adobe.com/x-productkb/multi/stage3d-unsupported-chipsets-drivers-flash.html
Check the bottom of the screen to see what Flash is reporting your rendering mode is. For example, mine states:
Your gpu supports Stage3D in both Baseline and Constrained profile!
Baseline RenderMode:
DirectX9
Constrained RenderMode:
DirectX9 (Baseline Constrained)
This probably won't get better in the future for you. Flash is not a low end multimedia runtime. It does require and utilize high end hardware in a much more reliable way.

I have iTunes 10.4 and every time I open it my CPU usage hits 100%. How do I stop this?

I have iTunes 10.4 and every time I open it my CPU usage hits 100%. This makes my computer really slow and almost unusable. How do I stop this? Another effect is that I cannot log onto the iTunes Store. I click on it and it says it is loading the iTunes store but the window remains blank.

So do I!

Skype makes computer stutter every few seconds

Sometimes this happens right away and other times it takes a few minutes but when I'm on a video call and only on a video call skype makes my computer start skipping or stuttering every few seconds. If I get my girlfriend to wave her hand on skype u can see the video pause for a split second every few seconds which also happens to anything I'm doing on the computer anywhere.
I've installed and uninstalled skype but nothing helps.
I have the brand new 2015 Macbook pro with broadwell processor. I've also used skype on the 2014 Macbook pro retina and it does the exact same thing. I never could get it to work right. My girlfriend has an old poopy 2012 macbook pro with no retina and she doesn't seem to have the issue. She has Yosemeti installed just like I do.
My processor runs about 40% usage in activity monitor. As you know 40% is only for one of the cores I assume since it can go way above 100% when check the activity monitor for whatever reason.
Any help would be greatly appreciated! Don't want to get rid of a mac b/c of this one issue.

I'm having the same problem, and I don't understand what started causing it. I assume it's the last two releases of Skype that I've upgraded to, because I don't remember this occurring on such annoyingly frequent level. I am running Windows 7 home premium x64, 4GB memory, Intel celeron 1.60 GHz.
It's very disappointing to see how with every new version of it, instead of fixing things and making the overall performance better, it seems to become worse. After Skype 6.9, every version has started increasing the resources used, and now thanks to skype, my laptop starts to freeze when I'm in a video call and try to watch a youtube video, or open a website. The CPU jumps to 100%, then drops a little, but it keeps a steady 50-70 % during the call, which is HUGE. And before someone suggests I buy a laptop with a more powerful processor, I'll say that just a few months ago it was working perfectly well, so the solution shouldn't be taxing to MY budget, surely!
I wish there was a chance to downgrade to a previous version, but no, you took that option away too, God forbid someone misses the ad-saturated versions, full of lagging and stuttering, constant freezing of the camera and constant "connecting" message, saying the internet connection is slow, or there is a problem with it, when in fact the Internet connection is perfectly fine and fast. What gives???

P75-a7200 - CPU max 33% at .79 Ghz

Im running handbrake and the max CPU utilization I can get is .79 Ghz. It states the max speed of the CPU is 2.40 Ghz and it sees 4 cores and 8 logical processors.
I bought an i7 for speed, this is slower then the i3 it replaced. What can I do to adjust the speed? Its plugged in and set to performance in the settings menu. I also made sure 100% cpu is avaliable under the advanced tab. Its not doing anything else so its not a overheating or resourece issue. Anyone have any info?
I downloaded Prime95 to test the CPU and HWMonitor to monitor the computer. CPU usage is the same - 33% @ .79 Ghz.
I can see the temps (started high 40's, running now in low to mid 50's) of each for cores going up, but the power levels match the CPU utilization as it's power draws are
Packages - 11.88
IA cores - 6.33
GT - .02
Uncore - 5.53
I would expect since the CPU is rated for 47watts, these numbers reflect that its either broken/damaged, or it has somehow been artificially throttled.
Can anyone help me. I got a screaming deal n this laptop but now I'm thinking it might be broken. I can return it in the next 4 days. I'd really love to keep it so any advice would be appreciated.

Im not sure what I did, but ive gotten the CPU to run at full speed. In the resource monitor it shows up to 133% CPU usage, which Im assuming is turbo boost.
I do think it was some kind of artificial limiting though as the cpu graphs had a blue line across them at 33%, which is where the CPU max was. I have no idea what program was doing it, but that blue line is now gone.
I did access the bios, and there is a feature called dynamic range (i think) that can either allow CPU to work with full power, or keep it locked down with a reduced power mode, but when I checked it it was set to full power. If this happens again it will be one of the first places I look.
The only thing that I did that I feel might have made a difference, though it would have to be a glitch, is adjust the CPU performance in the advanced tab under the power plan menu. (control panel > hardware and sound > Power options > select high performance then go to change plan settings > change advanced power settings > processor power management . It has options for minimum and maximum. I changed them all to 100%. I use laptops mostly as a desktop replacement that can be mobile in a pinch, so battery life is typically not a concern. It was set at minimum 5% on battery before I set it to 100%. Battery settings shouldnt effect the CPU when its plugged in (hence why I think it might have been a glitch). Im not saying for sure this fixed the issue, but shortly after making the change I saw the CPU was working at full speed.
In any event I've been running Prime95 and I've done a bit of 1080p encoding and the system has been running flawlessly. I'm hoping if I keep pushing it, if there is a problem, i'll get it to show up. Thanks for the response thogh, I really appreciate your time and the fact that you and others here are willing to help total strangers. Thanks.

Images are no longer scaling with (img {max-width: 100%; }) in css as of update 34.0.5 in firefox, this still works great in IE and chrome.

My website worked great until firefox update 34.0.5. Now the images will not scale to fit the box anymore. I am using flexbox so that the site scales to fit the size of the browser. In css I set img {max-width:100%;} and this would make the jpg files automatically size to fit the box they were in, but not anymore as Mozilla has really screwed this up with update 34.0.5. My site still works great with IE and Chrome but 70% of my web traffic is using firefox so I really would like this to work in firefox.
Any help is greatly appreciated!

I had the same problem, and this worked for me:
img {max-width:100%; width:100%;}

S5200UK more than meets Min Requirements for Win7 but slow and CPU peeking at 100% during IE or NIS

Hi everyone! Previously my S5200UK was upgraded from 1GB RAM to 2GB with a newer BIOS of V3.21
(See http://h30434.www3.hp.com/t5/Desktop-Hardware/Can-I-increase-RAM-size-if-I-upgrade-the-BIOS/m-p/1302... )
Thanks to Paul Tikkanen's help then I got the machine working fabulously but thanks to Microsoft's decommisioning of XP I decided to upgade to Windows 7 professional. The minimum requirements are 1GHz CPU and 1GB RAM. My AMD CPU is 2.08GHz but its performance is 2.6GHz equivalent. The RAM is 2GB and I have upgraded the HDD to a new Seagate SSHD SATA 1TB hybrid (with 8GB SSD incorporated). I used the exact drive on another machine a dx2000mt and WOW what a difference to boot speed (30sec) 1min with programs installed and data restored. (and that is usable desktop). I also fitted the ATI Radeon 9600 LE 128 MB AGP graphics card as recommended by Paul and a new 500W supply. I did not expect any problems as the 7 upgrade (clean install) on the dx2000mt went like a dream. Anyhow, this is the problem. After installing windows, all the updates and Norton Internet Security (NIS) the machine uses 100% processor and 25% RAM as I attempt to open NIS or use Internet Explorer. I can hear the CPU fan speed up every time it executes any small task and CPU shoots to 100%. With opening NIS there are two nis.exe processes using 50% CPU each! Any small demand of a program results in ultra slow operation. I put Win 7 on my old laptop with 1.5GHz CPU and 2GB RAM and that is great! I cannot believe that this S5200UK machine is limited by the CPU or RAM as it more that meets the requirements. I have obviously installed drivers (most came with Windows 7 and the others from a driver update program). There are no warnings or conflicts in the Device Manager and I have tried reinstalling everything again twice but it is always the same. I even tried changing the HDD to an IDE 80GB 7200rpm one but it was even slower! I also tried removing the graphics card but no change.Oddly I ran a performance test progam and, other than the memory, it came out better that the dx2000mt!!!! Has anyone got any suggestions as to what is causing this?
PS: The o/s is OEM for refurbished pcs on genuine hologram disk (no service pack but this was done via Windows Update) I will be very grateful if anyone out there can save my bacon. Thanks.

Hi:
The only recommendation I can offer based on what you have posted, would be to ditch the Norton Internet Security software and just run it with Microsoft Security Essentials.
That free antivirus/antimalware software uses very few system resources.
http://www.microsoft.com/en-us/download/details.aspx?id=5201
You would also need to use the Norton uninstall tool to make sure it cleans out all traces of the program.
https://support.norton.com/sp/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

Install itunes - cpu goes to 100 percent and stalls. Uninstalled, tried fixes on internet, reinstalled - same story

Have installed, uninstalled itunes on xp machine and tried all the fixes given in the discussion groups, plus cnet and other internet fixes.....nothing works. After installation of itunes cpu usage goes to 100 percent and itunes stops. Cpu stays at 100 percent until I uninstall itunes. By the number of posts on the internet, I can't believe Apple hasn't addressed this issue with a fix.

I had the same problem but this worked for me.
Get to a dos command prompt and type: netsh winsock reset
You will need to reboot your computer but it fixed tocpu 100% issue.
Good luck

Cpu goes to 100%

I can open itunes. I can not click on anything on the page without my cpu going to 100% and freezing my computer. If I type in an artist in the search I can sometimes look and purchase music. If I go to another artist my cpu goes to 100% and freezes. The only way to unfreeze it is to go to Windows Task Manager and end task on itunes.

http://discussions.apple.com/thread.jspa?threadID=723198&tstart=0

CPU goes to 100% on Iphone 4

I have the Problem, the CPU on my Iphone 4 goes to 100 % - when i start App like FB Messenger or another - after a while its crash and i can reproduce that the CPU are on 100% - Yesterday a have open Safari and 4 sites, one site needs a lot auf time and safari is froozen - i close and make new open and all open sites are away no page was open ...... Dont understand whats the problem - bluetooth is of and i use wlan too.

Hi Markus510,
Thanks for visiting Apple Support Communities.
You may find the steps in our iPhone assistant helpful with resolving the behavior you're seeing:
http://www.apple.com/support/iphone/assistant/phone/
All the best,
Jeremy

CPU Maxes when recording. (Time machine?)

I have this super annoying issue.
Every once in a while the cpu maxes out and I'm unable to use logic effectively. Meaning It is impossible to record due to pops and clicks from a maxed out CPU.
However, Activity Monitory only shows one of my cpu's at 13% and it looks great. Restarting logic does not help. I must restart my computer to begin recording again.
I just noticed today that this started happing when time machine started backing up.
Any ideas?
J

I just noticed today that this started happing when time machine started backing up.
Any ideas?
Turn off Time Machine?
x

CPU running over 100% using Roxio Toast

Hello,
I am using Roxio Toast and noticed that songs are skipping, I checked my CPU and it is going over 100%, when this happens.
My activity monitor show no other programs are running.
Any idea why my computer is running over 100% on one single program?
Thank you,
Bmac

single threaded and can't be broken up. Most likely written before hyper-threading and not optimized. Don't feel too bad, Apple had trouble also in 2009 and hadn't caught on and had audio code in that would spike processor core and overhead the system and wasn't rectified in 10.5.7+ but took 10.6.2+ to work around.
So what version are you using and is this the latest? And what about any other processes or something? A system can't run w/o lots of other processes, even if you aren't running a main foreground program, plug-ins, background, they all do matter.
My guess is like every thread almost, more input is needed about your system.
By itself it is just being inefficient.

T410s with extremely poor performance and CPU always near 100% usage

Hi,
I've had my T410s for almost a year now and lately its been starting to get extremely slow, which is odd since it used to be so fast.
Just by opening one program, Outlook, or IE or Chrome, just one window, it will start to get extremely slow and on task manger I can clearly see the CPU usage at 100% or very near.
Also another thing I noticed was the performance index on the processor dropped from 6.8 to 3.6!!!
I did a clean Windows 7 Pro 64Bit install, I have all Windows and Lenovo updates installed and the problem persits
What is happening and what should I do??
Thank you
Nuno

thank you again for your answer,
I've done that but hard drive health is also ok as you can see from the screenshot.
IAt the time of the screenshot I had just fineshed to boot up the laptop and it wasnt hot at all.
I am getting desperate here, I am unable to work with my T410s
Link to picture
Thank you
Nuno
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

PCSuite makes computer CPU max at 100%

Similar Messages

Maybe you are looking for