PCUI Pop up Confirmation during save event

Hi,
I would like to implement a confirmation pop up at tthe time of save. the user may
choose to proceed with the save or cancel save.
I have implemented in the following fashion but apparently it does not refresh the data on the PCUI page.
1. CHECK_BEFORE_SAVE - Raise Information Message. Set Flag not to save.
2. SAVE - Check if flag is set not to save, return error code. and do not continue with save.
3. GET_MESSAGES - Add the messages to rt_applog (Message is configured for navigation)
4. PROCESS_EVENT - Process for the pop up events 'Yes' and 'No'.
'Yes' event will call the save method after initializing do not save flag. 'No' with exit.
Please recommend correct way to implement a pop-up confirmation during save event.
Thanks
Shyam

Hi,
This pop up is related to the WorkProtect mode,
It will be configured in the portal,
There will be 3 options available
if Workprotect mode is 0--- then navigate automatically
1-- pop up and then navigate
2- navigate with out saving.
i'm not sure about the values.
WorkProtect mode can be seen in the personalize link and this link is available if eu_role is assigned to the corresponding user.
Please contact portal admin team regarding this.
Anilkumar

Similar Messages

PCUI - Pop up

Hi,
I would like to implement a confirmation pop up at tthe time of save. the user may
choose to proceed with the save or cancel save.
I have implemented in the following fashion but apparently it does not refresh the data on the PCUI page.
1. CHECK_BEFORE_SAVE - Raise Information Message. Set Flag not to save.
2. SAVE - Check if flag is set not to save, return error code. and do not continue with save.
3. GET_MESSAGES - Add the messages to rt_applog (Message is configured for navigation)
4. PROCESS_EVENT - Process for the pop up events 'Yes' and 'No'.
'Yes' event will call the save method after initializing do not save flag. 'No' with exit.
Please recommend correct way to implement a pop-up confirmation during save event.
Thanks
Shyam

Hi,
This pop up is related to the WorkProtect mode,
It will be configured in the portal,
There will be 3 options available
if Workprotect mode is 0--- then navigate automatically
1-- pop up and then navigate
2- navigate with out saving.
i'm not sure about the values.
WorkProtect mode can be seen in the personalize link and this link is available if eu_role is assigned to the corresponding user.
Please contact portal admin team regarding this.
Anilkumar

How can we get save event at Photoshop shutdown?

Hi All!!
I have to perform some actions on the save event of a document. I had no problem in doing the same. But, during testing different save event trigger scenarios, I came across the a situation in which an untitled document is open and the user closes Photoshop. At this point Photoshop prompts the "Do you want to save document?" message. Regardless of the user selection ("Yes"/"No"), the plugin is unable to get the save event, possibly because of application shutdown. I get the kSPInterfaceShutdownSelector message directly. No stop at the save event callback.
How can I ensure that my save event callback is executed everytime a user saves a document?
Thanks!

Hi Ilya,
I put in event listeners for close event, save event. I receive a call at the close event call back function. There I tried to get the saved document name, but I get none since the document has been closed. I need the saved document name to do my work. After the close event call back function, the call goes straight to shutdown plugin. The save event callback is missed totally. Why is this being done?
The same is being done if I close an unsaved document without closing Photoshop. I am presented with a "Do you want to save?" prompt. If I choose "Yes", then the plugin just receives a call at the close event callback. No call received at the save event callback.
What can I do?

Shift Confirmation during COR6N

Hi,
How to do shift confirmation during cor6n? or during a process order confirmation.
I don't see a spot for shift, but if I put the start and finish date,
and time stamp, save.
and go to display - cort,
then I see the shift in the Personnel/ addition data.
This issue is it always comes as 1.
Is there some other way of doing shift confirmation?
I have maintained he appropriate shift sequence, - 3shifts,
assigned to the the resource.
Help will be appreciated.
Thnx!

Hi Abhi,
Same issue i have also faced.we managed this issue by making use of reason for variances(GRUND)field where we difined 3 shifts in reason for variance in customising and we made that field mandatory.we changed that field name as Shift.when ever during confirmation is being done users were entering the shifts in this field.
reason for variance ,we wre capturing in confirmation text.
discuss with the buisnees ,is that ok and decide
with regards
Girish A

User exit on SAVE event in tranasaction CS01

Hi all,
Please tell me user exit on save event in transaction cs01.
Thank you.

Hi,
Check the following user exits.
PCSD0001            Applications development R/3 BOMS
PCSD0002            BOMs: Customer fields in item
PCSD0003            BOMs: Customer fields in header
PCSD0004            BOM comparison
PCSD0005            BOMs: component check for material items
PCSD0006            Mass changes user exit
PCSD0007            Check changes in STKO
PCSD0008            WBS BOM: Customer-specific explosion for creating
PCSD0009            Order/WBS BOM, determine URL page
PCSD0010            Order/WBS BOM, determine explosion date
PCSD0011            Knowledge-based order BOM, parallel update
PCSD0012            Customer - Mat. number/mat. number during material exchange
PCSD0013            Customer-specific processing of an explosion for BOM browser
hope it helps
Regards
Rajesh Kumar

Pop up required on save

Hi All,
We have a requirement that a popup should be provided onSave of the Sales orders with address.
We have referred to the PC UI example in the cook book and integrated CRMD_BUS2000115.
The event is triggered and message is also set, but the POPUP is not called in the standard.
Could you any of you please help me with this?
Regards,
Shwetha

Hi Swetha,
The save event is not handled in the Model access class. So you have to raise a message in the order save badi( restrict it to your process). Map the message to the PC-UI event for raising the Pop-up. There is an example in cookbook for raising a pop-up.
Reward if helpful.
Regards,
Naveen

My Calendar on my iPhone won't allow me to save any events. It says "cannot save event" does anyone know how to fix this issue?

After updating my phone earlier this month to the 5.1 software my calendar won't let me save any events. It displays "Cannot save event" I have tried googling the error and I have tried restarting the app, restarting my phone and even cutting the calendar off and back on....nothing has worked. Any other suggestions???

Select the drive and Finder > Get info and at the bottom "ignore permissions on this volume"
You can copy the files, but the ownership on the files still belongs to the other user account, once your done copying, then perform a #6 Reset Users Permissions and that will set all the ownership to that account.
..Step by Step to fix your Mac
Another method is to copy the entire folder, then change it's permissions.

My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish

Calendar on iOS 7.1: Cannot Save Event - That event does not belong to that event store.

Hi All,
I have an iPhone 5 running iOS 7.1.
Yesterday, while updating a birthday in the iPhone iOS calendar app (default calendar = GMail), I noticed that the new 'List View' in the iOS 7.1 calendar (and only that view) showed an event called 'New Event' - which has a start date of 2014 and an end date of 2001. If I go into that event, it will show me no title and no location - only, as mentioned, funny start and end times. The 'Delete Event' button is completely missing. This 'New Event' does not come up in any other view.
Trying to input a ficticious title with a valid start and end time into that event slot leads to a message from the calendar app saying: "Cannot Save Event - That event does not belong to that event store." I have deleted all calendars and re-add them again via settings, with / without soft and hard reset and tried every possible combination. Yet, the event will not disappear.
The funny thing is that this 'New Event' will still showed up, even when my GMail, work and iCloud calendars were disabled. I have, however, subscribed to a GMail calendar for Australian holidays, and there is a built-in 'Birthday' calendar that pulls the dates from the contacts (I do not use that contact field, though).
Does anyone have a similar issue? Any suggestions how to fix it?
Thanks in advance!
Edit: This 'New Event' does not seem to sync to any calendar other than on the iPhone - not to Gmail, not to work, not to iCloud.

Had same problem. Although the phone looks off it actually isnt. If you actually turn it off and then on again this problem will disappear. I think its a memory overload issue that is solved by clearing the memory by turning it off.
Worked for me

Not able to get changed values in the SAVE EVENT in ServHPartnerDet view

Hi Experts,
I am new CRM WEB IC, i have requirement like need to access four IBASE fields from BupaIbaseDetail and need to display those fiedls in ServHPartnerDet view. I am able display the fields and its values in the target view. But when user press change button and changes those four fields and press save button not able get the changed values in to the SAVE EVENT.Anyone please help me in this.
IBHEADER , IBASEADDRESS are the CONTEXT NODE CREATED in target view. I have binded IBHEADER to CuCoIbase custom controller and getting four fields data from IBASEADDRESS. below is the code for CREATE_CONTEXT_NODES.
METHOD create_ibaseaddress.
DATA:
    model        TYPE REF TO if_bsp_model,
    coll_wrapper TYPE REF TO cl_bsp_wd_collection_wrapper,
    entity       TYPE REF TO cl_crm_bol_entity,              "#EC *
    entity_col   TYPE REF TO if_bol_entity_col.             "#EC *
model = owner->create_model(
      class_name     = 'ZL_CRM_IC_SERVHPDET_CN00'
      model_id       = 'IBaseAddress' ).                    "#EC NOTEXT
ibaseaddress ?= model.
CLEAR model.
coll_wrapper =
    ibheader->get_collection_wrapper( ).
TRY.
      entity ?= coll_wrapper->get_current( ).
    CATCH cx_sy_move_cast_error.
ENDTRY.
IF entity IS BOUND.
    TRY.
        entity_col = entity->get_related_entities(
                        iv_relation_name = 'FirstLevelComponent' ).
      CATCH cx_crm_genil_model_error.
    ENDTRY.
    TRY.
        entity ?= entity_col->get_current( ).
      CATCH cx_sy_move_cast_error.
    ENDTRY.
    CLEAR entity_col.
    IF entity IS BOUND.
      TRY.
          entity_col = entity->get_related_entities(
                          iv_relation_name = 'ComponentAddress' ).
          ibaseaddress->set_collection( entity_col ).
        CATCH cx_crm_genil_model_error.
      ENDTRY.
    ENDIF.
ENDIF.
ENDMETHOD.

Code i have written in the CREATE_CONTEXT_NODE method for my custom context nodes( IBHEADER,IBASEADDRESS).
this CREATE_IBHEADER some data related to IBASE header then from this reading the IBASEADDRESS contextnode fields for displaying in the ServHPartnerDet. It is working fine but After changing the four fields values in the ServHPartnerDet view and trying to save, then context is not reading the new values it gives the old values only.
TRY.
      lr_coll_wr = ztyped_context->ibaseaddress->get_collection_wrapper( ).
      IF lr_coll_wr IS BOUND.
        lr_entity ?= lr_coll_wr->get_current( ).
      ENDIF.
    CATCH cx_crm_genil_model_error.
ENDTRY.
CALL METHOD lr_entity->if_bol_bo_property_access~get_property_as_value
    EXPORTING
      iv_attr_name = 'BUILDING'
    IMPORTING
      ev_result    = lw_building.
the building has got result of old value no the new value.
method CREATE_IBHEADER.
    DATA:
      model        TYPE REF TO if_bsp_model,
      coll_wrapper TYPE REF TO cl_bsp_wd_collection_wrapper,
      entity       TYPE REF TO cl_crm_bol_entity,    "#EC *
      entity_col   TYPE REF TO if_bol_entity_col.    "#EC *
    model = owner->create_model(
        class_name     = 'ZL_CRM_IC_SERVHPDET_CN01'
        model_id       = 'IBHEADER' ). "#EC NOTEXT
    IBHEADER ?= model.
    CLEAR model.
bind to custom controller
DATA:
      cuco TYPE REF TO cl_crm_ic_cucoibase_impl,
      cnode TYPE REF TO cl_bsp_wd_context_node.
cuco ?= owner->get_custom_controller(
        'CuCoIbase' ).                                      "#EC NOTEXT
cnode ?=
    cuco->typed_context->ibaseheader.
coll_wrapper = cnode->get_collection_wrapper( ).
ibheader->set_collection_wrapper( coll_wrapper ).
endmethod.

"cannot save event. no calendar has been set." what does this mean and how do i fix it?

I keep getting the error message when I try to enter a new event or edit an existing event to my calendar:
"Cannot save event. No calendar has been set."
Any ideas on how to fix it? VERY inconvenient!
Thanks.
txwyrick

Well, there's a lot we don't know ... for example, if you have actually set up a calendar somewhere you're trying to sync to.
Anyway, with no other information than what you provided, here's a possible troubleshooter:
iCloud: Troubleshooting iCloud Calendar

User Exit / BADI for F-02 during SAVE to update BSEG Line Items.

Hi Experts,
I need a User Exit / BADI for Transaction code F-02 which triggers during save to update BSEG-SGTXT with Vendor / Customer
name in the Tax Line Item.This is to update table BSEG .
Thanks in Advance,
Nithy

Hi,
Do it with the BTE 00001120 (tcode FIBF).
I hope this helps you
Regards,
Eduardo
PD: I forgot, check this link. It will tell you how to do it
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
Edited by: Eduardo Hinojosa on Jul 15, 2009 6:38 PM

Unable to change the order quantity value during save of sales order

Hi Experts,
There is a need to change the order quantity value, based on some conditions, when pressed 'ENTER' or during 'SAVE' of the sales order (VA01, VA02).
We are trying to change the order quantity value (KWMENG) in table XVBAP in the subroutines userexit_field_modification, userexit_save_document and userexit_save_document_prepare of the user exit 'MV45AFZZ'. But the change is not replicated to field on GUI.
The order quantity value can be changed in subroutine 'userexit_move_field_to_vbap', but the subroutine is not getting triggered when user changes only the order quantity on screen.
Please help us in resolving this issue.
Regards,
Santosh

Thanks for your time guys. The issue is resolved.
SAP is not triggering the vbap user exit as the order quantity on screen is in structure RV45A.
There are two ways of resolving the issue.
1. Implement the SAP note #513342 - Quantity change and USEREXIT_MOVE_FIELD_TO_VBAP. But, it is SAP modification note.
2. Write the code in VBEP exit of MV45AFZZ. This user exit is called whenever the order quantity is changed. But, it is called multiple times in some cases. Hence, need to write code to limit our code execution only once e.g. maintain a global table with our quantity & uom. Check when the quantity and uom in our table is same as quantity on screen. If not, exit from user-exit.
Edited by: Santosh Kacham on Nov 11, 2011 6:37 AM

Calendar can't save event to exchange server

Since moving to Yosemite I've been getting this error message with calendar - "Calendar can't save event "{event name}" to the Exchange server."
I'm unable to find any fix, including turning on/off time zone support. I've also re-established the exchange account more than once - each time the error eventually comes back (with a different calendar event).
Here's a link to a discussion on this subject, however, it was created under OS X Mountain Lion. I never encountered this issue prior to Yosemite. Thus, I created a new discussion here under OS X Yosemite.
Re: Calendar - Exchange sync issue
Has anyone created a workaround yet?

I had this issue too. Since all my data was present on the exchange server, I decided for the "delete" approach. First i quit the calendar app, then I went into library/calendars. There i deleted all files including Calendar cache and several folders ending on .exhange and .calendar. After a reboot i reconfigured my exchange account and everything seems to work fine now.

Imported old family video, I seperated different events, how can I save event to put together in a menu like family, vacation, christmas.

Imported old family video, I seperated different events and named each event, how can I save event to put together in a menu like family, vacation, christmas to make a DVD

revdhayes wrote:
I imported 5 1 hour old video in Final Cut Pro X. I spent all day seperating clips with Start and end then naming each clip in properties..
Sorry, but I don't understand what "5 1 hour video" means.
I do understand that you have a lot of clips that you want to group by various subjects, like vacation, etc. That's a perfect job for keywords, which perhaps is what you used when you named them?
If you did use keywords, go to that TL Index and click Tag at the top and then the keyword icon at the bottom. It should give you a list of only clips in that category. Select clip from the menu and it should highlight them. You could then copy and paste them to a new project for export. Repeat as necessary.
If you're going to do a lot of these, I'd suggest doing this from the event browser, applying keywords and then the clips into separate projects. But there are always more than one way to do things, and to each his/her own.
Again, I don't have any idea how long your footage is and whether it is even possible (or desirable) to fit it on to a single DVD. I mentioned iDVD because of its menu and sub menu capabilities. You will need another app like Compressor to do the chapter makers (unless Apple updates FCP before you finish your project and adds that capability. That would be nice,)
Good luck.
Russ

PCUI Pop up Confirmation during save event

Similar Messages

Maybe you are looking for