PDA continuously connecting & disconnecting

Hi All,
just tried hooking up an old Dell Axim x30i pda, and whilst it appears to be recognised ok (I haven't actually tried syncing it or anything yet), it seems to continuously connect & then be disconnected for some reason.
dmesg | tail info:
usb 2-1.3: configuration #1 chosen from 1 choice
ipaq 2-1.3:1.0: PocketPC PDA converter detected
usb 2-1.3: PocketPC PDA converter now attached to ttyUSB0
usb 2-1.3: USB disconnect, address 31
ipaq ttyUSB0: PocketPC PDA converter now disconnected from ttyUSB0
ipaq 2-1.3:1.0: device disconnected
usb 2-1.3: new full speed USB device using ehci_hcd and address 32
usb 2-1.3: configuration #1 chosen from 1 choice
ipaq 2-1.3:1.0: PocketPC PDA converter detected
usb 2-1.3: PocketPC PDA converter now attached to ttyUSB0
messages.log is filled up with repeats of the above. Could someone explain why this is happening please?

I just ran a hardware test (on ML you must hold down Option-D so it can access the hardware test bits via the 'net) and the test completed without finding any issues. I wonder if the issue has to do with switching between the integrated and discreet graphics.

Similar Messages

My new Mac Air continues to disconnect from WiFi after going to sleep. When waking it up I have to manually re-connect. How do I keep it connected?

My new Mac Air continues to disconnect from WiFi after going to sleep. When waking it up I have to manually re-connect. How do I keep it connected?

I had this problem too and solved it by doing a clean install. After that it was gone.
This is a drastic method since it takes quite some time to reinstall lion and all your software.
Thoughts I had why it started working after a clean install are the following:
It looked like the airport wasn't able to reconnect fast enough before the connection timed out. So what could have prevented my mac from being able to connect fast enough?
Apps that consume processor cycles. I love what I would call 'System Enhancers', little apps that enhance my workflow (Moom, Alfred, Dropbox, Default Folder etc). I'm not saying that these are the problem, they might be programmed processor friendly, but check if you have apps that consume processor cylcles. It might prevent airport from being able to reconnect quickly enough before it times out.
Mobile Config profiles. Another thought I had was that I had a mobile config 802.1X profile installed for the company were I worked. It used TTLS to connect to the corporate network. This profile might have gotten in the way.
And a sidenote...
Routers with hardware acceleration might also be a problem. My router is a Wireless Gigabit Router 300N WL-351 and has hardware acceleration. As soon as I activate that my wifi connection keeps dropping. It is as if a Macbook Air can't handle that amount of optimisation.
That's it, hope it helps those who are still having the problem.
Best, Jan

N96 Bluetooth connects/disconnects continuously

Hi guys having trouble with my new N96 that I got on Saturday, great phone but am now having a bit of a problem.
I have a Parrot CK3100 car kit installed in the car which has worked fine up untill now with all my phones that have been a good mix everything from a 6230 to a S.E. C902
I tried connecting my N96 today and it connects stays connected for a few seconds then disconnects then connects again automatically then disconnects again over and over again...! Frustration!
Anybody have any ideas as to what the solution for this may be?
Also I noticed while it was connected it didn't transfer contacts automatically... will this be like all the other N series phones and not do the contacts sync with the Parrot. Bit disappointed now as I love my Parrot!
Solved!
Go to Solution.

Yep
Exactly the same for me. Connects and disconnects.
But I can help you.
For syncing your address book just go to your contacts, mark all.Then collect as a business card and send to you parrot via bluetooth. That stores them as they are now. When you add more contacts you will have to repeat the process.
As for the connecting disconnecting I have a very clumsy fix.
Turn on your parrot and let it connect to N96. Then ( believe me on this ! ) plug in your stereo headphones and leave them in for about a minute. Unplug them and you n96 will stay connected to your parrot.
Don't ask me how I worked it out.
This leads me to believe that there is a profile activated by the headset that we need to find and activate as default for the car kit. I've looked but not sorted it yet.
Let me know how you get on.

WRT54GS v6Router - laptop connects, disconnects, re-connects, disconnects...

I have Linksys router wired to a desktop and a laptop that connects wirelessly. Recently, the WZC was stopped somehow and I turned it back on. This didn't resolve the problem. My laptop will show connected and then disconnected on the EasyLink Advisor Status screen. This connect-disconnect-reconnect is continuous about every two to three minutes. The wired desktop has no problems. Any ideas?
Thanks in advance for your help.
Donnie

Dan, et al,
Okay. So I didnt resolve the issue. What i learned is that if I close the internet connection, i.e., close email or and PC restart, I have no WZC. From hte command line I start the WZC and then, in the properties of hte wireless connection I have to check "Use Windows to configure my networks" or something like that.
Why do I now have to perform this each time the PC or internet connections are closed?
Also, when I try to view networks in area I get hte warning that WZC isn;t running and maybe a third party set up is running.
Any ideas what I have done to mess this up? Thanks in advance for your(anyone's) help.
Donnie

Magic Mouse connects / disconnects at random

Hi,
I have a MacBook Pro and a Magic Mouse for just 13 months now. It worked fine just until I installed Yosemite.
Now the Magic Mous, working with Bleutooth, connects bit disconnect in one or two seconds later, and than it connects / disconnects again repeatively. I replaced batteries for new ones but in vain: problem continues.
Do I need a new driver that did not went automaticly with Yosemite? Is there an other problem?
Thanks for your help in advance
anjarie

My magic mouse will work for a couple days fine but for the majority of the time my mac book doesnt even recognize it at all. It says no blue tooth device detected. I've tried everything. New batteries, turning on and off, trying to do anything I can think off. The icon at the top of the page says Bluetooth: Not Available. When I turn the mouse on by the switch on the bottom, it glows green for about 2 seconds ad then starts blinking twice then eventually stops blinking all together. Its been days since i can get it to work. It has always been really touchy. I think I may take it in to the mac store and see what they say. Any one have any ideas????

WiFi Connecting/Disconnecting...Connecting/Disconnecting...

Is anyone else having a problem with their iPhone continuously connecting and disconnecting from their wifi connection? Sometimes I'll be using wifi, and then my phone suddenly reverts to edge. When I go into wifi settings I can see a check mark continuously appear and disappear in front of my network. This occurs until I reset my router. It only happens every couple days, but it's getting to be pretty annoying. I'm using a Belkin router with WPA2 encryption.

Thanks, Steve. I've tried that to no avail. I've tried both the reset and restore method, and I keep having this problem. Maybe I'll change the encryption from WPA2 to WPA or WEP. I'll let you know if it works for me.

Pda says"connecting to labview",why?

Hi! I've built and downloaded my exe to the pocket pc 2002, but when I open it the pda says "connecting to labview": if you want the exe to start you have to wait for about 1 minute or press the button "cancel". Why this behavior? can it be avoided?
thanks!!!
M.

Is this code you wrote? Is it an NI example?
It sounds like the PDA is trying to connect to the PC, and after a minute the Open Connection part times out and the rest of the application continues.
If this doesn't help you, I suggest you give us some more details about the program, and\or post the relevant piece of code.
Try to take over the world!

IPod touch 4th gen stuck in connect/disconnect loop, will not charge on desktop PC, but is recognized fine by older laptop?

I have an iPod 4th gen that up until the week before was connecting and charging fine on my desktop computer (running Windows 7(64-bit)). Now, when connected to the USB ports on my desktop, it goes into this rapid and unending connect/disconnect loop, never staying connected long enough to even be recognized by the computer. There is an error message that also says that charging is not supported by the computer, when before, things were fine. Despite all the problems on the desktop, the iPod is recognized fine by my 5 year old laptop, which is running a simplified version Windows XP. Halp. I've tried everything on the iPod support pages regarding this issue, and would really like to avoid calling Apple about this. Any suggestions?

Try putting it is DFU mode:
http://www.ijailbreak.com/apple_news/using-dfu-mode-to-fix-ipod-touch-and-iphone -errors/

PDA Application Connect to Database

Hi,
I want to develop application sit on PDA(like iPAQ) eg.Contact Manager (to keep personal contact). this require a database to keep all these information in the PDA so that can be retrieve.
Its there any Micro-Database that can be installed into PDA (free?).
Please show me the link to get this Installaler, JDBC and documentation.
Please show me also the way to create database and table in PDA. and step to install this micro-db into the PDA.
It would be more helpful, if someone can give me some simple example of a PDA Application connect to Database.
Thanks in advance, Regards

Open source one is :
http://sourceforge.net/projects/hsqldb
This one is not absolute free but the price is quite compelling.$995 for unlimited install.
http://www.quadcap.com/home.html
http://www.quadcap.com/purchase/index.html
4. The rights granted pursuant to this Agreement are contingent upon Licensee's payment of the license fees for the QED Software. The License Fee for this Commercial Redistribution License is USD $995.
Even SQL CE from MS is free, as long as you not use it connected to backend system. so if u could work out other sync implementation or u dont need data sync at all, this might be a choice too. The issue is no official JDBC driver for SQL CE though there is for SQL server.
However, I have no hand on experience on those 3. We are evaluating Pointbase Micro, thought not free.l

Why is firefox continuously connecting while on a web page? The wheel is spinning every 10 seconds or so. I reinstalled firefox so I need help.

Firefox is continuously "connecting" while I am on the web. It does not matter what site I am on but it keeps connecting (wheel spinning) every 10 seconds or so. Like it is reloading the page. The page does not go away, but it is driving me crazy as it did not used to do this. I did download a free trial of WordPerfect, but it was not what I was looking for and deleted it. I also reinstalled Firefox, so I am not sure what is going on. Help Please! I have a Windows 7 Sony Vaio computer. I ran the virus check a couple of times and it came up okay.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Applications move between spaces when connecting/disconnecting second display

During the day I'm constantly connecting/disconnecting/reconnecting my 2nd display to my Mac. When I do that a lot I see a few things happen:
- Applications move to different spaces
- One or two of my spaces dissappear
Has anyone come across this issue before and is there any solutions or options I can try out.
Many thanks!

I just ran a hardware test (on ML you must hold down Option-D so it can access the hardware test bits via the 'net) and the test completed without finding any issues. I wonder if the issue has to do with switching between the integrated and discreet graphics.

Bluetooth connection - Keeps connecting / disconnecting in car.

Hi,
I've recently got a Z2 phone and i love it all apart from when I get in my car.
It connects, disconnect, connects, disconnnect, and so on and so on for as long as Im driving.
I've done all I can think of.
Reset the phone, unpair the devices etc.
does anyone have any idea? is this a known issue?

I guess nobody has this issue?
The car is a 2014 Vauxhall Insignia
I've had the garage look into it but they have no problem getting other phones to connect to the vehicle, even my old Nokia 920 works fine.

Ipod just keeps connecting/disconnecting. any thoughts?

here's the story. my ipod died. i upgraded to itunes 7. still was not working, i go to apple and get a refurbished one. the new one keeps connecting/disconnecting. when i open my computer, it shows it just blinking like its there, then its not. does not show in itunes, but half the time says do not disconnect.
here's where it gets weird. the USB port runs other devices fine. i plugged my ipod into a friends PC and could put music on it. i plugged my friends ipod into my PC and it shows up fine. i've swapped the ipod USB cord with my friend and it still does the same thing. so its not the ipod, its not my comp. and its not my itunes. anyone even want to attempt? i'm at my wits end here.

Try forcing the iPod into Disk Mode using the instructions in this Apple support document.
Putting iPod into Disk Mode
If you can successfully do that, it should keep the iPod mounted on your PC long enough for you to perform a restore of it via iTunes.
Restoring iPod to factory settings
B-rock

Dial-up connection disconnects when importing CDs into iTunes

When importing a CD, my dial-up Internet connection disconnects after each song has finished importing. The importing doesn't seem to be affected, but I keep having to reconnect. This is very annoying!
Has anyone else had this problem, and how can I fix it?

This is also a known phenomenon on Macs with a dial-up connection.
For Macs there is a workaround, but no solution yet.
By using an Applescript, the firewall settings will be toggled on CD insert, preventing iTunes to contact Gracenote (to get track information).
I don't know something similar for Windows.
Maybe you can write some code yourself.
The URL to block (temporary) is "http://service.gracenote.com"
You can always get the track information later by selecting all tracks of an imported CD and choosing 'Get CD Track Names' from the Advanced menu in iTunes.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.6) Several ext. HD (backup and data)

Dial-up connection disconnecting

When importing a CD, my dial-up Internet connection disconnects after each song has finished importing. The importing doesn't seem to be affected, but I keep having to reconnect.
Does anyone have any idea why this occurs?

hi Michelle!
where do I begin trying to find the culprit?
actually, i just remembered seeing somewhere (i've lost the thread, though) someone reporting a problem with their internet connection that went away after they updated their
b sound card drivers
(of all things).
so let's try working through this document on sound problems in itunes. let's try/check-on
b everything
there, and see if a sort of "audio spring clean" fixes both problems for you.
(thinking here that since neither of us know
b precisely
what's going on, this can at least provide us with a structured place to start our investigations.)
love, b

PDA continuously connecting & disconnecting

Similar Messages

Maybe you are looking for