PDA deploy using TCP/IP

Hello,
Can we deploy LabVIEW PDA/LaBVIEW Mobile through TCP/IP, ethernet?
Thanks.

If you can see the PDA device on your computer  through the manufacturers software, then I would imagine that you could deploy to it.  I've never heard of any PDA that works this way, but there is a lot out there and they do things differently.  Have you tried it without success?
David_L | Certified LabVIEW Architect
LabVIEW Tools Network | LabVIEW Tools Network Developer Center

Similar Messages

  • The client timed out waiting to connect to the Essbase Server using TCP/IP

    Hi,All
    When I deploy the HPCM application to essbase, i received the following message below in the log file hpm.log
    2009-02-20 13:34:50,389 [Thread-115] ERROR com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator: error setting measures dimension member properties
    com.hyperion.profitability.data.mdb.essbase.MDBException: Error setting member property share option to store_data for member: D0900SB
         at com.hyperion.profitability.data.mdb.essbase.MDBMember.setShareOption(MDBMember.java:413)
         at com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator.setMemberProperties(CubeGenerator.java:1232)
    Caused by: com.essbase.api.base.EssException: (1290001): Network Error [10061]: Unable To Connect To [hypeion:32776]. The client timed out waiting to connect to the Essbase Server using TCP/IP. Check your network connections. Also please make sure that Server and Port values are correct
         at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
         at com.essbase.server.framework.EssOlapMetaDataService.ex_olap(Unknown Source)
    And the Essbase service is up.
    Pls help!
    Shen.

    If you are installing on Windows, there is a limitation in the default configuration of TCPIP. I wrote about it, and included the steps to fix it, on my blog at http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html.
    Note the error number you reported is slightly different than what I write about in the blog, but I believe I have seen this error fixed by the blog steps..
    Tim Tow
    Applied OLAP, Inc

  • How to use TCP Checksum Off-load in my network driver

    I am seeking infomation on how to use TCP Checksum Off-load to tell the Solaris 8 stack not to handle it for both receives and transmits (and let our NIC handle this compute-intensive task instead).
    There is mention that Sun GigabitEthernet Adapter cards, Release 1.1 supports Sol-2.6 use of NIC features: TCP checksum offload & byte swapping
    There are limited bits of info in include files. For example
    sys/strick.h indicates use of:
    inetcksum_t's ick_xmit
    stream.h has:
    struct datab's unsigned u16:16; /* used to store hw-calculated cksum
    #define STRUIO_IP 0x04 /* IP checksum stored in db_struioun */
    #define STRUIO_ZC 0x08 /* mblk eligible for zero-copy */
    strsub.h has:
    struct zero_copy_kstat
    Also /include/inet/tcp.h has tcp_sum for outbound.
    Thank you. -Weimin Tchen

    VenK7337,
    Could you show your python code. so we know what your are "writing" to the ethernet port?
    That way we can see what you are receiving.
    Parsing the incoming data (from the TCP-read) depends heavily on the device that sends it, and can not generically be described. LabVIEW has many byte (and even bit) manipulation functions to convert many different data formats to its own build in formats.
    So after the TCP listener is connected, you are constantly reading from the established connection (until it gets broken of course). More advanced example would be the internet toolkit if oyu have it.
    From the read characters (and I hope you designed a protocol with a clear starting character, ending character and maybe even a build in checksum) you parse the data and perform you action, and of course generate a reply. Again the internet toolkit is a good example. It parsed the input as it comes it, based on the HTTP format. Then generates the reply based on the request received.
    These days I would suggest not to use binairy encoded numerics. Try and use XML formatted data. Yes, it causes a lot of overhead. But typically this is not an issue and makes the code a lot more portable and maintainable. Also makes it easier to interface with other languages/platforms.
    Umless of course you are looking at Khz data rates, then XML is not th preferred choice.
    Hope this helps...

  • How do I activate Office 2013 that I have deployed using ODT and App-V onto a Remote Desktop Server?

    I am setting up a demo Server 2012 R2 environment (1 DC server, 2 RDSH servers, 1 App-V server).
    I have created an Office 2013 volume license App-V package using the latest Office Deployment Toolkit. I have deployed the App-V package to an RDS server and it all works fine. However, I am unable to activate Office 2013 using the MSDN Office 2013 retail
    key because it tells me the product key is invalid for this version of Office. I've looked at the alternative of using the App-V Sequencer to create the Office 2013 package, but from what I've read this is not a Microsoft supported method.
    Is there any way that I can activate Office 2013 (volume license on RDS) using the method I've outlined above, or is there any way of using the Office2013 download from MSDN such that it can be packaged by the ODT (or App-V Sequencer) for successful deployment
    using App-V and activation using the retail Office 2013 product key on MSDN?

    True, VL channel media can't be activated with MSDN Retail pkeys (that's what I was trying to get you to understand, I figured you would be attempting that, as so many people do :(
    I've not attempted your scenario myself.
    It sounds like you aren't following the supported scenarios as (poorly) described by MS;
    The way I read their guide, for an RDS scenario, you must use a VL key [either MAK or KMS] (since a subscription product+key can't be used on RDS):
    i.e.: <Product ID="ProPlusVolume">
    http://support.microsoft.com/kb/2772509
    http://support.microsoft.com/kb/2915745
    http://technet.microsoft.com/library/dn481351.aspxhttp://blogs.technet.com/b/office_resource_kit/archive/2013/12/02/announcing-app-v-5-0-sp2-support-for-office-2013-volume-licensing-editions.aspx
    So, that all means that for RDS, you can't use anything other than VL "product" (in
    the form of an ODT-generated output) with a VL pkey. So, for your RDS demo setup, you need to use real product and real pkeys.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Error while deploying using ant in 11g

    Hi all,
    I am trying to deploy order demo application using ant from command line in SOA 11g. I just ran the ant script to package the composite and it is giving me below mentioned error.It is referring to 1 file in all the wsdls and creating problem. Actualy, JMS_FedEx.wsdl is partner link to JMS Adapter that writes to a queue. I am confused because I have 2 more adapter created on similiar lines like this but while compiling no error references are made to those wsdls. I am not sure What's wrong with this wsdl. However, Composite gets complied and deployed using Jdeveloper. Please provide your Inputs.
    Nov 29, 2011 3:10:38 PM oracle.adf.share.ADFContext getCurrent
    WARNING: Automatically initializing a DefaultContext for getCurrent.
    Caller should ensure that a DefaultContext is proper for this use.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
    Load of wsdl "oramds:/soa/shared/workflow/TaskServiceInterface.wsdl" failed
    oracle.fabric.common.FabricException: Error in getting XML input stream: oramds:/soa/shared/workflow/TaskServiceInterface.wsdl: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/TaskServiceInterface.wsdl does not exist.
         at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:280)
         at oracle.integration.platform.common.MDSMetadataManagerImpl.getInputStreamFromAbsoluteURL(MDSMetadataManagerImpl.java:557)
         at oracle.fabric.common.metadata.MetadataManagerImpl.getDocumentAsInputStream(MetadataManagerImpl.java:159)
         at oracle.integration.platform.common.MDSMetadataManagerImpl.getDocumentAsInputStream(MDSMetadataManagerImpl.java:419)
         at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:244)
         at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:308)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:934)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Caused by: java.io.IOException: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/TaskServiceInterface.wsdl does not exist.
         at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:429)
         at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStreamWithRetry(AbstractOraMDSURLConnection.java:262)
         at oracle.mds.internal.net.AbstractOraMDSURLConnection.getInputStream(AbstractOraMDSURLConnection.java:183)
         at oracle.mds.internal.net.OraMDSURLConnection.getInputStream(OraMDSURLConnection.java:67)
         at java.net.URL.openStream(URL.java:1010)
         at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:276)
         ... 9 more
    Caused by: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/TaskServiceInterface.wsdl does not exist.
         ... 15 more
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/receivePO.wsdl] part name = part1     type = {http://xmlns.oracle.com/ns/order}PurchaseOrder" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/receivePO.wsdl] part name = part1     type = {http://xmlns.oracle.com/ns/order}PurchaseOrder
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_USPS.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_USPS.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:58)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_UPS.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_UPS.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/approveLargeOrder.wsdl] part name = payload     type = {http://xmlns.oracle.com/ns/order}Order" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/approveLargeOrder.wsdl] part name = payload     type = {http://xmlns.oracle.com/ns/order}Order
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/ManualApproval_DecisionService_1.wsdl] part name = payload     type = {http://xmlns.oracle.com/ManualApproval/ManualApproval_DecisionService_1}errorInfo" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/ManualApproval_DecisionService_1.wsdl] part name = payload     type = {http://xmlns.oracle.com/ManualApproval/ManualApproval_DecisionService_1}errorInfo
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest" failed
    java.lang.Exception: Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:58)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest" failed
    java.lang.Exception: Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest" failed
    java.lang.Exception: Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/FulfillmentProcess.wsdl] part name = payload     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/FulfillmentProcess.wsdl] part name = payload     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_FedEx.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_FedEx.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/WriteApprovalResults.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/order}Order" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/WriteApprovalResults.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/order}Order
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/WriteApprovalResults_Remote.wsdl] part name = body     type = {http://xmlns.oracle.com/pcbpel/adapter/ftp/}OutboundFTPHeaderType" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/WriteApprovalResults_Remote.wsdl] part name = body     type = {http://xmlns.oracle.com/pcbpel/adapter/ftp/}OutboundFTPHeaderType
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Thanks,
    Vikas Manchanda

    Read the last post please -
    Unable to Compile-All in Weblogic Fusion Demo
    Regards,
    Anuj

  • Error during deploying using sapdeploy ant task

    I am attempting to deploy a simple service which I have created using Dev studio. Instead of deploying using Dev studio, I want to use ant task for the same.
    This is the output I see in the console:
    deploy:
    [sapdeploy] Starting deployment with the following properties:
    [sapdeploy] Version Handling Rule: all
    [sapdeploy] Error Handling Strategies: [error action: 'prerequisites', error strategy: 'stop', error action: 'deploy', error strategy: 'stop']
    [sapdeploy] The targeted SAP J2EE Engines are: [server host: 'myhost', server port '50000', user name 'J2EE_ADMIN'.]
    [sapdeploy] Starting to validate the data...
    [sapdeploy] Validation ended
    [sapdeploy] root dir C:\temp\HelloWorldEAR
    [sapdeploy] Selected archives for deployment:
    [sapdeploy] 1: 'C:\temp\HelloWorldEAR\HelloWorldEAR.ear'
    [sapdeploy] Starting validation for the engine 'server host: 'myhost', server port '50000', user name 'J2EE_ADMIN'.'
    [sapdeploy] Engine data validated successfully
    [sapdeploy] Starting deployment for the engine 'server host: 'myhost', server port '50000', user name 'J2EE_ADMIN'.'
    [sapdeploy] An error occured during the deployment.
    [sapdeploy] The result of the deployment is: Error
    [sapdeploy] Deployment ended
    Where can I get more details of what might be wrong with the deploy process? I tried "-v" flag but to no avail. Syslog of the server shows nothing of interest.
    Thanks in advance for any help.
    Regards,
    Sameer

    Logs will be in log\dc_log folder.

  • How to call RFC in Async Mode using TCP/IP RFC Destination ?

    Hi experts,
         Can anybody tell me how to call an Async RFC using TCP/IP RFC Destination ?
    Regards,
    Umesh

    Check the link
    http://help.sap.com/saphelp_nw04/helpdata/en/80/09680289c751429ab3b07ad2a61c10/content.htm
    It says
    <b> For asynchronous calls, no connection to external systems is possible (TCP/IP connections in transaction SM59).</b>
    Regards,
    Abhishek

  • Problem with CORBA application deployed using Java Web Start 1_6_0.

    Java Web Start fans and experts:
    We have been using Java Web Start to deploy the client side of a CORBA-based application since the inception of Java Web Start ... including Java Web Start 1.0 right up through the present.
    With Java Web Start 1_6_0, we see evidence that Web Start is "tinkering with" the IOR that CORBA uses to communicate. In all previous versions of Java Web Start, independent of the JRE which the application uses, the stringified IOR have been the same size regardless of whether the application is deployed locally or via Java Web Start. With Java Web Start 1_6_0, the stringified IOR is much longer than the "real" IOR (again, regardless of the JRE used by the application itself). To me this smells like a bug in Java Web Start 1_6_0. Has anyone else observed this behavior?
    Here are some specifics .... I've run the same client application with various JREs both with and without Java Web Start as the deployment mechanism. The application was compiled and runs against servers that are running JDK 1_5_0_09.
    Here is the summary of my results from a Linux box running various JREs, various versions of Java Web Start, and also running as a non-JWS deployed application. I've listed the length of the stringified IOR in each case.
    JRE 1.5.0 non-JWS client: stringified IOR length = 344
    JRE 1.6.0 non-JWS client: stringified IOR length = 344 ... this, I think, excludes the JRE as the cause of these problems.
    Java WS 1.5.0, JRE 1.5.0 JWS client: stringified IOR length = 344
    Java WS 1.5.0, JRE 1.6.0 JWS client: stringified IOR length = 344
    Java WS 1.6.0, JRE 1.6.0 JWS client: stringified IOR length = 1568
    Java WS 1.6.0, JRE 1.5.0 JWS cleint: stringified IOR length = 1568
    In all cases, the stringified IOR length is determined by the service receiving the message and is always running JRE 1_5_9_09 and is
    always the same 344 characters in length UNLESS it was deployed
    using Java Web Start 1_6_0, in which case it in nearly 5 times as big!
    To me, it sure looks as if there is a problem with Java Web Start 1_6_0 to be adding so much to the stringified IOR. Note: it's hard to tell how different the underlying IOR is in the JWS 1_6_0 case because, unlike most other ORBs, the Sun ORB doesn't have a tool to extract the IOR into a human readable structure. However, I can think of no good reason why the identical application deployed using Java Web Start 1_6_0 should have a stringified IOR length that is different than that of the same application deployed in non-JWS form or should differ from the behavior seen in all previous releases of Java Web Start.
    Any clues or suggestions? Has anyone else observed this behavior?
    Thanks,
    John

    Hi.
    I got a different problem. My Corba application works in JRE 1.6, but doesn't works in JRE 1.5.X. I got an unexpected error and my console shows:
    getSubjectX500Principal NoSuchMethodError: java.lang NoSuchMethodError
    #### Java Web Start Error:
    #### null
    Can you help me?

  • Authentication syntax for HTTP GET method using TCP functions in Labview on linux

    Hi,
    Currently, I am trying to communicate to web server. I have Labview installed on a Linux machine. The HTTP function blocks and other labview functions do not work. Hence, I am building a HTTP code string using TCP functions (port 80) to talk to the web server. I am successfully able to fetch a response from web sites (example www.ni.com) from my vi. However, when I try to communicate to my web server, it does not work. It requires an authentication. I am able to open http://ipaddress in my browser from my machine using username and password. Can someone help with Authentication string requirement for GET method?
    so far the string is:
    GET /index/ HTTP/1.1
    Host: http://xx.xx.xx.xx

    An easy option would be to try http://userassword@server syntax for the URL.
    Else I posted a Twitter fetcher once (won't work anymore since Twitter moved to Oauth authentication) at LAVA. Based on code from @cloew.
    The code is part of this LLB.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Azure websites continues deployment using visual studio online doesn't work

    Hello!
    I have an issue with continues deployment in Azure. I have two subscriptions for my project. I created the team project in Subscription 1 & done the automatic deployment using GITContinuesDeployment. Everything is fine but while I changed the subscription
    I can't do the automatic deployment since the Team project can't be find. The question is how can I do the deployment? I get the following error:
    An attempted http request against URI https://management.core.windows.net/....../publishxml returned an error: (404) Not Found.
     Exception Message: One or more errors occurred. (type AggregateException)
    Exception Stack Trace:    at Microsoft.TeamFoundation.Deployment.Workflow.Activities.RestApiAsyncCodeActivity`1.ProcessAggregateException(AsyncCodeActivityContext context, AggregateException ag)
       at Microsoft.TeamFoundation.Deployment.Workflow.Activities.RestApiAsyncCodeActivity`1.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
       at System.Activities.AsyncCodeActivity`1.System.Activities.IAsyncCodeActivity.FinishExecution(AsyncCodeActivityContext context, IAsyncResult result)
       at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
    Inner Exception Details:
    Exception Message: One or more errors occurred. (type AggregateException)
    Exception Stack Trace:    at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
       at System.Threading.Tasks.Task`1.InnerInvoke()
       at System.Threading.Tasks.Task.Execute()
    Inner Exception Details:
    Exception Message: An attempted http request against URI https://management.core.windows.net/.../publishxm
    If I check Azure website also in Subscription 2, I can't find the Team project also from Subscription 1 even If I can see the subscription 1& 2 under services in Visual studio online 
    returned an error: (404) Not Found. (type HttpRequestWithUriException)
    Exception Stack Trace:    at Microsoft.TeamFoundation.Deployment.Workflow.Activities.GetAzureWebsitePublishProfile.<>c__DisplayClass2.<GetApiTask>b__0(Task`1 returnTask)
       at System.Threading.Tasks.ContinuationResultTaskFromResultTask`2.InnerInvoke()
       at System.Threading.Tasks.Task.Execute()
    Does anyone have the solution for that?
    Regards,
    Maryam

    Note that the better forum to directly reach the Visual Studio Online experts is
    here. A forum admin may be able to move the post to the right place.

  • SAP ECC Interface w/ IDOC-XML using TCP/IP, HTTP, or FTP to 3rd-Party Syst.

    I am trying to understand if the following interface options can occur (without the use of SAP PI or any other middleware):
    Option 1A: Can I process an SAP ECC outbound IDoc in XML using TCP/IP to a non-SAP 3rd party system?  Can you please explain the reason for why I can or can NOT do this.  If possible, please provide supporting documentation on how-to do this?
    Option 1B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used TCP/IP?  Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
    Option 2A: Can I process an SAP ECC outbound IDOC in XML using HTTP to a non-SAP 3rd-party system?  Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
    Option 2B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used HTTP?  Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
    Option 3A: Can I process an SAP ECC outbound IDOC in XML using FTP to a non-SAP 3rd-party system?  Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
    Option 3B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used FTP?  Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?

    Hello Kirk  ,
    The answers for your question are:
    Option 1A: Yes you can .you can use TCP/IP but you must have a middleware component for that such as BC/JCO .
    Please see the link : [http://help.sap.com/saphelp_nw04/helpdata/EN/09/c88442a07b0e53e10000000a155106/frameset.htm]
    Option 1B: See the link above.
    Option 2A: You can use ABAP code :
    [http://help.sap.com/saphelp_nw04/helpdata/EN/e5/4d3514c11411d4ad310000e83539c3/frameset.htm]
    Option 2B: [http://help.sap.com/saphelp_nw04/helpdata/EN/90/4f3c2ec3c511d6b2b400508b6b8a93/frameset.htm]
    Option 3A: Only with ABAP code :[Reg: FTP Connection;
    Option 3B: See the link of Option 3A.
    Good Luck,
    Boaz
    Edited by: Boaz Ornan on Feb 21, 2010 4:33 PM

  • Receiver IDOC error - using TCP/IP

    Hi All,
    I have a scnario where I am sending an IDOC to BCOMM ERP system via IDOC adapter from SAP PI using TCP/IP RFC program but while sending it is giving me an error in SM58 as IDocException occurred and there isn't much info in SM21 or ST22 or any other transaction.
    Error log in SM21 says
    Name of the partner program where an error has occurred.  Check the
    preceding system log entries.
    Use the gateway monitor (transaction SMGW) to monitor the functions
    of the gateway.
    If someone has ever worked on such a scneario please let me knw and any pointers would be great.
    Cheers
    Abhi

    Hi Michael,
    I know that this is not the conventional way but we cannot use RFC of type 3 as it is not a ECC system , it can handle IDOC communication via Idoc adapter through a SAP connector at there end which can be handled only via TCP/IP.
    I am able to do it for another system with similar scenario but Not able to do for this particular system.
    Can you tell me about your scenario and how you did it?
    Thanks for your reply.
    Cheers
    Abhi

  • Can anyone tell me how to do a system level deployment using JNLP ?

    Hi All,
    Can anyone tell me how to do a system level deployment using JNLP ?
    Any example or link will be very useful.
    Thanks in advance..

    Thanks for the link. I can now able do configure on system level.
    Uniform for all users.
    However, I have three different environment running ( e.g : production, uat and dev )
    And I want to deploy all of them on system or enterprise configuration.
    I create the file "deployment.config" on jre/lib directory and put the entry as below :
    deployment.system.config=file:/E:/Deployment/XXXX/production/deployment.properties
    deployment.system.config.mandatory=trueNow, when I run other environment it will look on the production deployment. I have different
    version of jars for production , uat and dev.
    How can I archive that ? I want different universal "cache" of jars for all the three different environment.
    e.g ( production - in one loaction for all the users , C:\Documents and Settings\All Users\Application Data\prod\cache
    uat - in one loaction for all the users , C:\Documents and Settings\All Users\Application Data\uat\cache
    dev - in one loaction for all the users, C:\Documents and Settings\All Users\Application Data\dev\cache )
    Is that possible ??
    Thanks in advance,

  • Check the BER using TCP/IP

    Hi
    I work on a laser communication link. We want to make it more efficient, so this link has one computer connected to each side of the laser. I use LabView TPC connection to transfer a file from on side of the link to another side. However, when I convert the file to binary array it takes hours for small files like 5Mb. I want to know If there is a better way to check the Bit Error Rate of the laser link using TCP/IP and if there is a better way to convert to binary.
    Thanks.
    Ohad

    I'm using fsona laser 1250-S which connected to a cisco 2500 by fiber optics then connected to a computer by TCP/IP, in each side. I'm correctly transferring a file from one side to another and convert it to binary. However it does not give me the results that I'm looking for since there are error correction in the way.
    thanks.
    ohad.

  • Question related to remote weblogic deployment using wldeploy task

    Problem Description: Iam trying to perform a remote deployment using wldeploy task from one of the unix box(this box does not have a weblogic instance at all) to a remote unix weblogic server. I get the following connection exception. This script works fine when I do a remote deployment from my windows machine(this has a local weblogic server)to the same remote unix weblogic server.
    Question:
    1. Do I need to have a weblogic instance locally where this wldeploy task is executing?
    2. What configuration should be done in the remote weblogic server to support remote deployment?
    The ant task is:
    <property name="wlantjars" value="/ftmp/users/usrgrb/tmp/antjars" />
    <path id="wlappc.classpath">
    <fileset dir="${wlantjars}">
    <include name="*.jar"/>
    </fileset>
    </path>
    <taskdef name="wldeploy" classpathref="wlappc.classpath" classname="weblogic.ant.taskdefs.management.WLDeploy"/>
    <target name="deployear_dev2">
    <wldeploy user="weblogic" password="*******" adminurl="t3://he3unxd189v01:9100" action="deploy" upload="true" remote="true" source="${build.dir}/mktpx.ear" name="mktpx" targets="devCluster" />
    </target>
    I receive the following error when I execute the ant task "deployear_dev2"
    Buildfile: build.xml
    deployear_dev2:
    [wldeploy] weblogic.Deployer -remote -upload -noexit -name mktpx -source /usrdata/dev/cashdesk/gcp/mktprice/quickbuild_prototype_ccview/prototype.vws/vob/mktprice_vob/mkt_price/dist/mktpx.ear -targets devCluster -adminurl t3://he3unxd189v01:9100 -user weblogic -password ******** -deploy
    [wldeploy] weblogic.Deployer invoked with options: -remote -upload -noexit -name mktpx -source /usrdata/dev/cashdesk/gcp/mktprice/quickbuild_prototype_ccview/prototype.vws/vob/mktprice_vob/mkt_price/dist/mktpx.ear -targets devCluster -adminurl t3://he3unxd189v01:9100 -user weblogic -deploy
    [wldeploy] javax.enterprise.deploy.spi.exceptions.DeploymentManagerCreationException: [J2EE Deployment SPI:260010]Unable to connect to 't3://he3unxd189v01:9100' as user, 'weblogic'. Error received: Couldn't connect to any host
    [wldeploy] at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.<init>(WebLogicDeploymentManagerImpl.java:121)
    [wldeploy] at weblogic.deploy.api.spi.factories.internal.DeploymentFactoryImpl.getDeploymentManager(DeploymentFactoryImpl.java:84)
    [wldeploy] at weblogic.deploy.api.tools.SessionHelper.getRemoteDeploymentManager(SessionHelper.java:496)
    [wldeploy] at weblogic.deploy.api.tools.deployer.Jsr88Operation.connect(Jsr88Operation.java:297)
    [wldeploy] at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:137)
    [wldeploy] at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:158)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:115)
    [wldeploy] at weblogic.Deployer.run(Deployer.java:70)
    [wldeploy] at weblogic.Deployer.mainWithExceptions(Deployer.java:62)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [wldeploy] at java.lang.reflect.Method.invoke(Method.java:597)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy.java:419)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.java:349)
    [wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [wldeploy] at java.lang.reflect.Method.invoke(Method.java:597)
    [wldeploy] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
    [wldeploy] at org.apache.tools.ant.Task.perform(Task.java:348)
    [wldeploy] at org.apache.tools.ant.Target.execute(Target.java:357)
    [wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:385)
    [wldeploy] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
    [wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
    [wldeploy] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
    [wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
    [wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:698)
    [wldeploy] at org.apache.tools.ant.Main.startAnt(Main.java:199)
    [wldeploy] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
    [wldeploy] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
    [wldeploy] Caused by: weblogic.deploy.api.spi.exceptions.ServerConnectionException: [J2EE Deployment SPI:260010]Unable to connect to 't3://he3unxd189v01:9100' as user, 'weblogic'. Error received: Couldn't connect to any host
    [wldeploy] at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getMBeanServer(ServerConnectionImpl.java:251)
    [wldeploy] at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getMBeanServerForType(ServerConnectionImpl.java:191)
    [wldeploy] at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.init(ServerConnectionImpl.java:147)
    [wldeploy] at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.getNewConnection(WebLogicDeploymentManagerImpl.java:148)
    [wldeploy] at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.<init>(WebLogicDeploymentManagerImpl.java:118)
    [wldeploy] ... 32 more
    [wldeploy] Caused by: java.io.IOException: Couldn't connect to any host
    [wldeploy] at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:156)
    [wldeploy] at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
    [wldeploy] at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
    [wldeploy] at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
    [wldeploy] at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getMBeanServer(ServerConnectionImpl.java:240)
    [wldeploy] ... 36 more
    [wldeploy] Caused by: javax.naming.NamingException: Couldn't connect to any host [Root exception is org.omg.CORBA.OBJECT_NOT_EXIST: Unknown object in LOCATE_REQUEST  vmcid: 0x0  minor code: 0  completed: No]
    [wldeploy] at weblogic.corba.j2ee.naming.Utils.wrapNamingException(Utils.java:83)
    [wldeploy] at weblogic.corba.j2ee.naming.ORBHelper.getORBReferenceWithRetry(ORBHelper.java:590)
    [wldeploy] at weblogic.corba.j2ee.naming.ORBHelper.getORBReference(ORBHelper.java:547)
    [wldeploy] at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:85)
    [wldeploy] at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:31)
    [wldeploy] at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:41)
    [wldeploy] at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    [wldeploy] at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    [wldeploy] at javax.naming.InitialContext.init(InitialContext.java:223)
    [wldeploy] at javax.naming.InitialContext.<init>(InitialContext.java:197)
    [wldeploy] at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:143)
    [wldeploy] ... 40 more
    [wldeploy] Caused by: org.omg.CORBA.OBJECT_NOT_EXIST: Unknown object in LOCATE_REQUEST vmcid: 0x0 minor code: 0 completed: No
    [wldeploy] at weblogic.iiop.LocateReplyMessage.needsForwarding(LocateReplyMessage.java:171)
    [wldeploy] at weblogic.iiop.IORManager.locateInitialReference(IORManager.java:254)
    [wldeploy] at weblogic.corba.orb.ORB.resolve_initial_references(ORB.java:258)
    [wldeploy] at weblogic.corba.client.naming.ClientORBInfo.<init>(ClientORBInfo.java:34)
    [wldeploy] at weblogic.corba.client.naming.ClientORBHelper.createORBInfo(ClientORBHelper.java:42)
    [wldeploy] at weblogic.corba.j2ee.naming.ORBHelper.cacheORB(ORBHelper.java:314)
    [wldeploy] at weblogic.corba.j2ee.naming.ORBHelper.cacheORBAndCreateURL(ORBHelper.java:323)
    [wldeploy] at weblogic.corba.j2ee.naming.ORBHelper.getORBReferenceWithRetry(ORBHelper.java:583)
    [wldeploy] ... 49 more
    BUILD FAILED
    /usrdata/dev/cashdesk/gcp/mktprice/quickbuild_prototype_ccview/prototype.vws/vob/mktprice_vob/mkt_price/build/build.xml:366: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Unable to connect to 't3://he3unxd189v01:9100': Unknown object in LOCATE_REQUEST. Ensure the url represents a running admin server and that the credentials are correct. If using http protocol, tunneling must be enabled on the admin server.
    Total time: 9 seconds

    regarding error:
    Caused by: org.omg.CORBA.OBJECT_NOT_EXIST: Unknown object in LOCATE_REQUEST vmcid: 0x0 minor code: 0 completed: No
    Make sure to place the wlfullclient.jar at the beginning of the classpath ...any other WLS specific Jars need not to be added additionally. For above error please refer to : Client SAF error
    Few Things:
    1). When I execute the ant build from a remote box , should I have a weblogic server running...the reason I ask is..does the wldeploy task work only if there is an active weblogic domain in the local machine. When I execute the same build from my windows machine where I have a local instance of weblogic , it works uccessfully .Whenever you try to deploy any application on WebLogic Domain then the Admin Server must be running. Because the deployment entries goes inside the "config.xml" and the original copy of this file is maintained by AdminServer only. So the Admin Server must be running for any kind of configuration changes or for Deployment.
    2). I am told that http protocol is not an option in my work place and I have to use t3 protocol only. In that case, based on the error below, is it possible that the connection between my local unix box and the remote weblogic box is stricted? How to I test the connectivity using t3? I pinged the server from the local unix server and it came back with reply, but could not telnet to that remote box nor ftp to that box does not work.You can check t3 protcol is working fine or not by using the following one line command:
    java weblogic.Admin -url t3://he3unxd189v01:9100 -username weblogic  -password weblogic    PING
    If above command fails to ping the server it means either you are using a wrong HostName & Port OR your N/W is doesnot allow t3 protocol connections OR there may be a N/W Issue.
    Thanks
    Jay SenSharma

Maybe you are looking for