PDF Corrupt file after being using in sql 2008

I have SQL 2008 database a database with PDFs stored on it. The app reads the PDF from the database and stores it on the machine as a temp file, then launches Acrobat Reader.
At that point, I receive a message that the file format is invalid. I receive the same message when I have the app save the file as .pdf. I'm reading the PDF from the database using the Filestream object.
Is there a way to prevent this?

Look at following source of experienced or novice users. They can give you clear and effective answers for handling your situation:-
http://www.filerepairforum.com/forum/adobe/adobe-aa/pdf/600-pdf-document-error
Alternative paid solution:
Third party software, costs money, but gives you result
PDF Repair Toolbox
http://www.adobereaderrepair.acrobatrepairtoolbox.com/
Online repair service:
Visit:-
https://onlinefilerepair.com/
Push to Start Upload and Repair
Choose your corrupted .pdf from PC
Push Upload File for recovery
And get your file back with restored information…

Similar Messages

SQLAudit Files not being created on SQL 2008 R2 Enterprise

I am trying to create SQLAUDIT files for my database on SQL 2008 R2 Enterprise (SP2). I have MyDB with MyTable. This is the script I use:
USE [Master];
GO
CREATE SERVER AUDIT [MyServerAudit] TO FILE
(FILEPATH = 'C:\AuditData\', MAXSIZE = 2 MB, MAX_ROLLOVER_FILES = 2147483647, RESERVE_DISK_SPACE = ON)
WITH (QUEUE_DELAY = 0, ON_FAILURE = SHUTDOWN);
GO
CREATE SERVER AUDIT SPECIFICATION [MyServerAuditSpecifications] FOR SERVER AUDIT [MyServerAudit];
GO
ALTER SERVER AUDIT SPECIFICATION [MyServerAuditSpecifications] WITH (STATE = ON);
GO
USE [MyDB];
GO
CREATE DATABASE AUDIT SPECIFICATION [MyDBAuditTest] FOR SERVER AUDIT [MyServerAudit]
ADD (SELECT , INSERT, UPDATE ON [dbo].[MyTable] BY [public], [dbo] )
WITH (STATE = ON) ;
No errors from the script, and the directory C:\AuditData does exist. Then I try Selecting and Updating the table, e.g.,
USE MyDB;
SELECT * from MyTable;
UPDATE MyTable set Col1 = upper(Col1);
Again, it completes successfully, but C:\AuditData remains empty.
Can anyone see what might be going wrong?
Thanks.

Try:
USE [Master];
GO
CREATE SERVER AUDIT [MyServerAudit] TO FILE
(FILEPATH = 'C:\AuditData\', MAXSIZE = 2 MB, MAX_ROLLOVER_FILES = 2147483647, RESERVE_DISK_SPACE = ON)
WITH (QUEUE_DELAY = 0, ON_FAILURE = SHUTDOWN);
GO
ALTER SERVER AUDIT [MyServerAudit] WITH (STATE = ON);
GO
USE [MyDB];
GO
CREATE DATABASE AUDIT SPECIFICATION [MyDBAuditTest] FOR SERVER AUDIT [MyServerAudit]
ADD (SELECT , INSERT, UPDATE ON [dbo].[MyTable] BY [public], [dbo] )
WITH (STATE = ON) ;
GO
SELECT * FROM fn_get_audit_file('C:\AuditData\MyServerAudit_F1377395-15EF-4501-ACD1-3244CB9B4130_0_130603145960740000.sqlaudit',default,default);
GO
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

[HTML]SignTool Error: The file is being used by another process.

Hello,
I receive this error from building a JavaScript app on a build server:
SignTool Error: The file is being used by another process.
This reproduced when building on local machine, and goes away after building again. However, our company uses gated builds so the first failure will stop an entire 2.1 hour build and I can't ship the product.
The instruction to launch SignTool is located in external files so I can't disable it, run it twice, or run it in a while loop until succeeds, ignoring failures. I have to get it to work right the first time. I looked on MSDN, and there are other people
who had this problem and never solved it.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/5871d64c-e178-4f5c-85cd-a603fe56d6c7/signtask-signtool-error-the-file-is-being-used-by-another-process?forum=msbuild
http://www.codeproject.com/Questions/275454/Can-anyone-help-me-with-Signtool-Setup-Deployment
http://qualapps.blogspot.in/2006/12/code-signing.html
The only clue I have is our solution having build configurations that aren't called "Debug" and "Release", which have been cloned from Debug/Release and have WinRT apps building. If the build script for WinRT depends on anything being
called "Debug" and "Release" it wouldn't work correctly.
In any case, there is no documentation for SignTool that mentions this error - how do I fix it?

Hi TripleRectified,
>> If the build script for WinRT depends on anything being called "Debug" and "Release" it wouldn't work correctly
What's you version of Visual Studio, on my side, in the Visual Studio 2013 Update 4, I created a new configuration(Copy Settings from "Debug") to build a WINJS project, but I can't see the exception you mentioned.
>>This reproduced when building on local machine, and goes away after building again
Does it happen on all local machines? We need to exclude environment facts first, for example: Tool, OS etc.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

On Mac, why won't the downloaded PDF form SUBMIT after being filled out?

On Mac, why won't the downloaded PDF form SUBMIT after being filled out?
Thank you for the help.
Kind regards
Ryan Kohler

Hi;
This FAQ should describe the issue - you need to be using Adobe Reader (free) or Adobe Acrobat to fill out the PDF, Preview on the Mac breaks the PDF so it is no longer usable: http://forums.adobe.com/docs/DOC-2653
Thanks,
Josh

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tell me that the file is being used even when it is not. How can I fix this issue?

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when iall other programs are closed. How can I fix this issue?

Thanks Jeff, I was not aware that a template could be multi-page. (All the existing templates were 1 page)
But it worked, saving me some steps. When I was finished I renamed the document, and locked it.
Then tried to save it but could not because it was locked. I closed it, went to my Spread Sheet Folder ,
to find it, it was not there. The Finder could not find it either.
So I start over again.
I opened up Numbers and it showed my personal Numbers template folder, it contained both my new
original 4 page template and the vanished saved document!
I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again. I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
The secret is: Click on the document title in the menu bar, and it opens up "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving. Once done that, you can then lock the document in the same pull down menu, and then close it.
I also found later that I can delete a template from its folder, by letting Numbers open the templates,
clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
and from there the selected template can then be thrown into the Trash from there.
It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.

Ipod cannot restore"because files are being used by another application"

Hello all,
I hope someone can help me. I think I mad a big mistake. I did a favor for my father who bought the newest IPod clip on shuffle for my mom. I agreed to get it up and running using my laptop, (which has Itunes for my Ipod w/video) would this create a conflict. Unfortunately I didn't think of asking BEFORE i tried to get the shuffle up and running. The shuffle works fine now but my 30GB Ipod is not able to sync any songs and has requested me to restore to the default settings. Which I tried but when I do it states that I can't because "files are being used by another application" So I tried to use the chat help on this website and when I logged in it picked my product type as a SHUFFLE. Can someone give me any advice. Thanks

I get this messager and I have no other ipods or dev. to my system and have problems when I disconnect also?? Even have done a complete restore, to no help. Help

How to load other obejects in flash file after intro using ActionScript 3.0

How to load other obejects in flash file after intro using ActionScript 3.0 or any other method all in same fla file. see blow intro screen shot ,this one playing repeatedly without loading other fla pages .only way to load other pages is click on Skip intro .see second screeshot below .i need that site to load after intro .
see codes already in
stop();
skipintro_b.addEventListener(MouseEvent.CLICK, skipintro_b_clicked);
function skipintro_b_clicked(e:MouseEvent):void{
gotoAndStop("whoweare");
There is another script there
/* Simple Timer
Displays a countdown timer in the Output panel until 30 seconds elapse.
This code is a good place to start for creating timers for your own purposes.
Instructions:
1. To change the number of seconds in the timer, change the value 30 in the first line below to the number of seconds you want.
var fl_TimerInstance:Timer = new Timer(1000, 30);
fl_TimerInstance.addEventListener(TimerEvent.TIMER, fl_TimerHandler);
fl_TimerInstance.start();
var fl_SecondsElapsed:Number = 1;
function fl_TimerHandler(event:TimerEvent):void
trace("Seconds elapsed: " + fl_SecondsElapsed);
fl_SecondsElapsed++;
i have no knowledge about these thing ,any help really appreciated .

Ned Murphy Thank you very Much .It is working .Great advice

How do i recover files after being trashed?

how do i recover files after being trashed?

If you emptied the trash, you don't unless they are on your backup disk.

HT1339 My nano won't restore, it says it can't because "files are being used" Please help me get the "chipmunk's and Beiber" off my ipod!!!

I am trying to restore my nano to get my kids' chipmunk and beiber music off and it replys that it cant because files are being used.....what do i need to do???

First and foremost, just say no to Beiber
First, close all open apps on your computer and restart your computer. Open only iTunes when it restarts.
Then, I would reset your iPod, probably not needed but I would do it any way. Hold the sleep/wake button and the volume down button until the Apple logo appears. Wait for it to completely start up to where it is ready to use.
Now try and restore. If the iPod was synced with your own computer to put the music on, you can use it to remove it. Usually that is preferred instead of restoring.

Files are being used by another application?

I recently tried to update my 5.5 gen 80GB ipod by putting some pictures on it the other day, but when I tried to eject it, it told me that it couldn't because some files were being used by another application. I unsynced the pictures from it but it still tells me I can't eject it. What should I do?

Shut the computer down. That ought to terminate any activities that are still trying to access the iPod's data. Once the computer is shut down, the iPod's screen should read that it's safe to disconnect it.

What happened to ADOBE workspaces files after being downloaded before retirement?

What happened to ADOBE workspaces files after being downloaded before retirement?

I had this problem as well! I was working on one of several projects I had, I'm pretty sure they were saved on the computer, my computer started to chug, I reset it, and they ALL disappeared! I can't find any of the files anywhere on the hard drive, but I also can't sign into the cloud to see if they somehow got moved. I reset again, and still nothing.
When I try to log into the cloud it tells me the sync failed. Since I only just signed up for the subscription I don't know if it's common for it to go down, or what.

TS1425 I cannot eject my ipod classic after sync with i-tunes on my pc. It states some of the files are being used by other applications. What does this mean? How can I get it to eject?

I cannot eject my new ipod classic after sync with i-tunes on my pc due, it states, to open files being used by another application. What does this mean? How can I get my ipod to eject?

If it's a one-time "glitch," you can try restarting your computer with the iPod still connected. Try ejecting again after the restart.
If the problem recurs, you may have a process running (other than iTunes) that is accessing the iPod's storage. When connected, the iPod's "disk" is like other mounted volumes. This process may be some type of utility that continously monitors your mounted volumes for security reasons, such as to prevent access by malware.
If you know of such a program that you have running in the background, there may be a setting to exclude your iPod's disk.

How to create/delete files from filesystem using PL/SQL ? UTL_FILE?

Greetings,
I will start by explaining what i intend to do.
I have an application made in APEX. This application will have among other purposes the managment of pdf files which will reside in the filesystem.
I have questioned the person in charge to keep the pdf files in the database and not in the filesystem but without success.
So the pdf files reside in the filesystem and there is a record in a database table about them. A table keeps all info about the pdf, their location , size and name, creation date etc.
The APEX application will have a mecanism to allow the deletion of the pdf files if an administrator decides.
So it should be possible for an administrator to schedule the deletion of all pdf files whoe creation date is older than 2008 for example
So, how can i achieve that?
After some research i foudn about the UTL_FILE package which seems to have it takes to perform the task in issue.
My idea was to have a script in the operating system which runs nightly and reads a file containing all file names of the pdf to be erased.
The file which contains the names of the pdfs to be erased will be generated by the database a few minutes before.
If there are no pds files to be erased than the file containing the names will simply be empty
Are there any other viable solutions out there?
And as for opening/creating the file withn the pdf names, i use:
UTL_FILE.FOPEN (
location IN VARCHAR2,
filename IN VARCHAR2,
open_mode IN VARCHAR2,
max_linesize IN BINARY_INTEGER)
RETURN file_type;
And as for writing lines (a pdf name per line ), i use;
UTL_FILE.PUT_LINE (
file IN FILE_TYPE,
buffer IN VARCHAR2,
autoflush IN BOOLEAN DEFAULT FALSE);
is there a better solution?
thanks all.
-> My Homepage <-
Edited by: Igor Carrasco on Apr 14, 2009 3:11 PM
Edited by: Igor Carrasco on Apr 14, 2009 3:12 PM

Greetings,
I have read that link above, some questions still though.
I will provide some more information.
-First the database is in a windows server.
The windows server has a virtual drive mounted as z:\ <-- this points to a directory in virtual machine, i can manually access/create/delete files manually,i tested.
-Second utl_file_dir is defined as * , in t that enough to cover mounted drives? ( i can't change the init.ora and reboot the db right now :( gotta wait.. )
Do i explicitly have to define utfl_file_dir = z: ?
-Third haven't had the chance to test it on linux or any other operating system, assuming a virtual unit is mounted successfully and that the issues above are solved i should be able to operate on any mounted drive whatever the os, right?
Best regards

How to view pdf, xls files generated by using JasperExport

I am using Weblogic Server 8.1 to deploy my project. I have some pdf, xls files that generated by JasperExport. Code: 
Map parameters = new HashMap(); parameters.put("donvi",DVi); String ConnectionURL ="jdbc:oracle:thin:@localhost:1521:qltb"; Class.forName("oracle.jdbc.driver.OracleDriver"); Connection jdbcConnection = DriverManager.getConnection(ConnectionURL,"qltb","qltb12345"); jasperReport = JasperCompileManager.compileReport("C:\\baocao.jrxml"); jasperPrint = JasperFillManager.fillReport(jasperReport,parameters,jdbcConnection); //JasperViewer.viewReport(jasperPrint); JasperExportManager.exportReportToPdfFile(jasperPrint, "report.pdf"); 
report.pdf is exported to folder C:\bea\user_projects\domains\cems ( cems is name of domain) . But I dont know how to view this file or write relative path of this file For example : in test.jsp page I write Report 1 But it doesnt work.

Install IronTrack SQL as described in the following link
http://www.irongrid.com/documentation/irontracksql/install.html#install_oracle9iAS

[W8.1]Creating a trial app with a feature that expires after being used twice

I want to add a feature to my app that user can avail only twice or thrice in the trial mode. I am unable to figure out which purchase mode should I implement.
I successfully implemented the in-app-purchase for making the feature available for lifetime. But how should I go about limiting its usage if the user has not bought it?
According to the sample code I am following I have these options:
Expiring Product: This allows me to expire the feature after certain period of time but I need to expire the product after number of usage.
InAppPurchase: I can purchase feature through this but I cannot limit the feature in trial mode.
ConsumableInAppPurchase: Again it requires the user to buy the feature first and then it can be consumed.
I figured that if I can save an int in local settings of app the first time app is used and then decrement it until its 0, and then prompt the user to buy, it will do the job. But if I use this method user can always delete the settings file and my app wouldn't
know that it is not being used the first time.
Can anybody tell me how I can achieve my requirement?
Thanks

You cannot achieve this with the built-in trial mode. It is based entirely on the time limit you choose when publishing the app. After the time limit is up, the app will stop functioning.
To do what you want to do, you will have to write your own code. One of my apps, a word processor for example, lets the user use the app with full features for 7 days. After 7 days, instead of stop opening, it simply goes into read-only
mode until the user buys it. The advantage of doing it this way instead of making the app non-functioning forever after 7 days is the user will always have the opportunity to see what's new in my future updates. I don't want to lose potential customers!
Nothing the user can do to reset the 7 days trial. They can uninstall and reinstall as many times as they want. They can delete the settings file all they want. My method doesn't require the app to check over the internet. I'm
sure if you think hard enough you will figure out a way like I did. I'm just letting you know that there is a way and it is possible. I just don't want this method to be known too widely.
Are you saying your method is different from the 'Expiring Product' option I mentioned? To me it sounds the
same as that

PDF Corrupt file after being using in sql 2008

Similar Messages

Maybe you are looking for