PDF Output is moving one column to the middle of page (Prod Issue Urgent!)

Hi All,
I have a very funny thing and i could not get any solution.
I have a report that is printing data in 6-7 pages. This is very simple and tabular report.
1. I have created one big table with two columns (A and B).
2. Then i have created another two table under first column (A) and i am using second column (B) as a single column for the address.
When i run this report in PDF output then PDF report is shoing seond column (B) in the middle of the report.
Can anyone tell me solution for this.
Thanks
Jack

Hi,
Can you send over your rtf template, some sample XML and the pdf output from the report?
[email protected]
I will take a look and see what I can make of it.
Regards,
Cj

Similar Messages

When I save a PDF as an Excel File, all of the data in the PDF is put into one column (AdobeXI)

Hi, thanks for taking the time...
I'm running a machine with Windows 7, Office 2010, and Acrobat XI. When I save a specific PDF as an Excel workbook, all of the data in the original PDF is sorted correctly in four columns. When the same task is performed on this file on another user's machine, all of the data is sorted into one column. The user has the same versions of Windows, Office, and Acrobat. I've attempted the "Repair installation" option but the problem persists. Any suggestions? Thanks again for helping,
-E

Thanks for the quick reply. I figured out how to get the desired results by using tagging. For anyone who may reference this post in the future, I went to "Customize" in the top right corner of Adobe, then selected "Create new tool set...", looked under "accessiblity and found the "tag" option. Hit ok, tag is added to the toolbar. Then I highlighted the dataset in the PDF that was relevant to the output format, then clicked "tag", saved as spreadsheet. Sorry I can't provide more details on how tagging works or if there's a more elegant solution available, but I'm sure one's out there.

Download from ALV are all in one column including the header

Hello All,
We are having problems with the download of excel from ALV grid. what happens is that instead of the data dispalying in different columns, it is all in one column, including the header. what could be the problem? this only occurs in the production system but in the development and quality it is ok.
Thanks for your help.

Hi,
We also used the option download to local file and it works fine. Only the button download to excel is not working as expected.

How to add one column into the t.code: cat2

Hi
I am userexits
here i want to add one column into the t.code: cat2 at particular location, and that added field have to display the data what i am selcting in that transaction.
how to do this...
thankx

hi,
    CATS0005
    CATS0007
    CATS0009
    CATS0010
    CATS0012.
    Go through the documentations of above Enhancements to solve ur problem. I am not able to understand ur exact requirement. that is y i gave some more Enhancements.

How to add one column to the standard t.code : CAT2.

Hi,
How to add one column to the standard t.code : CAT2.
thanks

Hi Chinna
see the enhancements by using SMOD CATS0007 , or CATS0012 and create a project using CMOD and you can implement your requirement.
Hope This Info Helps YOU.
Reward Points If It Helps YOU.
Regards,
Raghav

Add one column to the screen exits

Hi All
I am doing Screen Exits,
here i have to add one column to the screen
and it have to retrive the data from the specified fields
anyone plz give me the solution.

Hi
which screen exit?
Max

To set a dropdown list for one column in the excel file before downloading

Hi all,
I am downloading an excel file which has the format of an internal table with a number of fields. I want to set a dropdown list for one column in the excel file. How can i do this?
Thanks

HI ,
U can use function module " QINT_GET_EXCEL_DATA " ....
and modify the excel sheet based on ur requirement ......
Try this ...
Hope it works
Thanks
Shambhu

Hello there, I created a DPS application and I want that when you click on an image, it opens a pdf. But this one is on the ipad. This is in case there is no internet connection. Thank you.

Hello there,
I created a DPS application and I want that when you click on an image, it opens a pdf. But this one is on the ipad.
This is in case there is no internet connection.
Thank you.

How to make the zip: http://helpx.adobe.com/digital-publishing-suite/help/import-htmlresources.html
How to link to the asset: Digital Publishing Suite Help | Hyperlink and button overlays
Neil

Inserting multiple selection from checkbox in to one column of the database

Hi,
how to insert multiple selection from checkbox into one column of the database.(I select array of values from checkbox ,then how to insert tat array of values iinto single column name).
Anyone can u reply me
Thanx

hhhmmm.... is this what you mean?
lets say you hava a checkbox1 with values value1, value2, value3 and you selected all there of them? then you want then to be stored in the database in one column?
now the question is:
Is it going to be one column one row?
datafield
value1,value2,value3
Or one column multiple row?
datafield
value1
value2
value3
Which is it?

Inserting multiple selection from checkbox into one column of the database

Hi,
How to insert multiple selection values from checkbox into one column of the database.
Anyone can u help me
Thanx

hi
try to use request.getParameterValues("fieldname")

Why are some websites squished to one column on the left?

All of a sudden some websites are all squished in one column on the left side of the iPad and are unreadable or unusable. This hasn't always been the case. I'm using safari. I've rebooted the iPad, I have the latest os system. Two examples are:
Www.unifiedpatriots.com
Www.vassarbushmills.com
I have my own website and it's been fine.
Www.conservative-outlooks.com
And the larger websites are fine as well. I'm really stymied.

Bad web design, or a proplem with the linked CSS files, would be my guess. Report it to the webmasters for those sites.
At least on one of them, you can pinch out to properly see the site.

I want to write a script or Automator workflow/app that emails a random shortcut of the day to three recipients. The source is from an Excel spreadsheet. One column is the shortcut, and the second column is the definition. Anyone have experience?

I want to write a script or Automator workflow/app that automatically emails a random shortcut of the day to three recipients. The source is from an Excel spreadsheet. One column is the shortcut, and the second column is the definition. Anyone have similar experience and know that this would work?

I have had a first stab at the script, below. It uses a file to store the shortcuts and command [descriptions]. You should be able to see from the script annotations how to add a new one. (I populated 1-4 with real data, but got lazy after that, so you have a few placeholders to work with first.
As I have noted, once you are happy that you have all the data in the file, you can comment out part of the script for ongoing use. (BTW, my reluctance to use Excel is that I don't currently have it installed and I don't want to offer wrong advice. If you have Numbers, I do have that and could probably modify to work with a spreadsheet from there. This might be especially useful if you have the data already sitting in Excel.)
A few things came-up whilist I was writing the script:
1.     Currently, all recipients will not only get the same tip at the same time, but they will see the names and email addresses of the others who receive them. It is possible to modify this.
2.     I have added a property gRandomCheck which keeps track of which shortcut has already been used (since the last time the script was compiled. This will prevent the same tip being sent more than once.    When all tips have been sent once, the script will alert you and not send anything until reset. It does not check on a per-addressee basis (which would be a refinement). (If you add a new addressee at this stage, the whole process will start again, and you may not really want this to be the behaviour.)
3.     The way that I have built the list, commandList, is deliberately cumbersome - it's for the sake of clarity. If you prefer, you can construct the whole list as {{shortcut:"X", command:"X"}, {shortcut:"Y", command:"Y"}}
Have a look - I am sure you will have questions!
SCRIPT STARTS HERE Paste the following lines (thru the end) into a new AppleScript Editor document and press RUN
--The property gRandomCheck persists between runs and is used to stop sending the same hint twice.
property gRandomCheck : {}
--I am defining a file on the desktop. It doesn't have to be in this location
set theFolder to path to desktop
set commandFile to (theFolder as text) & "CommandFile.csv"
--(* Unless you need to change the file contents you do not need to write to it each time. Remove the "--" on this line and before the asterisk about 18 lines below
--Follow this format and enter as many records as you like on a new line - each with a unique name
set record1 to {shortcut:"Z", command:"Undo"}
set record2 to {shortcut:"R", command:"Record"}
set record3 to {shortcut:"⇧R", command:"Record Toggle"}
set record4 to {shortcut:"⌘.", command:"Discard Recording & Return to Last Play Position"}
set record5 to {shortcut:"X", command:"x"}
set record6 to {shortcut:"X", command:"x"}
set record7 to {shortcut:"X", command:"x"}
set record8 to {shortcut:"X", command:"x"}
set record9 to {shortcut:"X", command:"x"}
set record10 to {shortcut:"X", command:"x"}
set record11 to {shortcut:"X", command:"x"}
set record12 to {shortcut:"X", command:"x"}
set record13 to {shortcut:"X", command:"x"}
--Make sure you add the record name before randomCheck:
set commandList to {record1, record2, record3, record4, record5, record6, record7, record8, record9, record10, record11, record12, record13}
--This part writes the above records to the file each time.
set fileRef to open for access commandFile with write permission
set eof of fileRef to 0
write commandList to fileRef starting at eof as list
close access fileRef
--remove "--" here to stop writing (see above)*)
--This reads from the file
set fileRef to open for access commandFile with write permission
set commandList to read fileRef as list
close access fileRef
--Here's where the random record is chosen
set selected to 0
if (count of gRandomCheck) is not (count of commandList) then
          repeat
                    set selected to (random number from 1 to (count of commandList))
                    if selected is not in gRandomCheck then
                              set gRandomCheck to gRandomCheck & selected
                              exit repeat
                    end if
          end repeat
else
          display dialog "You have sent all shortcuts to all recipients once. Recompile to reset"
          return
end if
--This is setting-up the format of the mail contents
set messageText to ("Shortcut: " & shortcut of record selected of commandList & return & "Command: " & command of record selected of commandList)
tell application "Mail"
--When you're ready to use, you probably will not want Mail popping to the front, so add "--" before activate
activate
--You can change the subject of the message here. You can also set visible:true to visible:false when you are happy all is working OK
          set theMessage to (make new outgoing message with properties {visible:true, subject:"Today's Logic Pro Shortcut", content:messageText})
          tell theMessage
--You can add new recipients here. Just add a new line. Modify the names and addresses here to real ones
                    make new to recipient with properties {name:"Fred Smith", address:"[email protected]"}
                    make new to recipient with properties {name:"John Smith", address:"[email protected]"}
--When you are ready to start sending, remove the dashes before "send" below
--send
          end tell
end tell

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page.

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page. I cannot seem to find any controls to adjust this. Any advice appreciated.

Thanks CtDave, for the further info. Unfortunately, those suggestions are not working, which is strange.
....Until last week, I used to make multi-page PDFs straight from Photoshop: File > Automate > Make PDF. One simply choses the files, orders them, and creates a PDF. (Resolution doesn't matter; 300 DPI is no problem.) However, my new Photoshop CS5 does not have the option in Automate.
What I've done, seeing as Acrobat is letting me down, is use Bridge (new to me) to create the PDF. It worked without a problem, but seems like more work than the old PS method. I will download a newer version of Acrobat to see if that makes any difference.
.....Also, thanks Test Screen Name: I agree with you that jpeg is irrelevant, and that one can make a PDF from Photoshop (Print > Save As - pdf). But that only works for SINGLE PAGE pdf, not multiple pages as far as I can tell.
Kind regards,
Prince Nuada

Attaching Word and PDF files in Mail without preview in the middle of a message

I am using Mail but often attaching Word docs and PDFs. Word attachments appear as small icons, but PDFs as preview and usually in the middle of the message. Can I attach PDFs as small icons and not in the middle of a message? Having just moved to Mac from PC I am missing the tidyness of Outlook, but if you can help me I'll persist.

I found this solution in a previous thread:
1. Open Terminal (Applications > Utilities > Terminal)
2. copy and paste this line after the $:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
3. hit return
4. you may need to restart Mail for the change to take effect, it worked for me without restarting Mail.
5. to change it back you would do
defaults write com.apple.mail DisableInlineAttachmentViewing -bool false

How can I sort a table using more than one column in Numbers or in Pages?

How can I sort a table using more than one column in Numbers or in Pages?

Hi Ron,
On the right side of the Toolbar click the Sort and Filter button, then select Sort.
You can then set up a multiple column sort.
Click Add A Column, Specify the sort for that column, Repeat.
Jerry

PDF Output is moving one column to the middle of page (Prod Issue Urgent!)

Similar Messages

Maybe you are looking for